SPECIAL REPAIR TO ROOF TREATMENT, TILING, JOINERY, PLASTER, FLOORING AND OTHER CONNECTED ITEMS AT BLOCK NO. P-71, P-72 AND P-115 AT RAKSHA VIHAR AT ADRDE AGRA UNDER GE (I) RND DELHI

Amount

Taking down cement plaster on brick/stone walls etc any description incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Material & Labour for rendering 15mm thick on any faces of brick work in CM1:6, finished even and smooth.

M & L rendering 15 mm thick on fair faces of brick/concrete work as in cement mortar (1:4) mixed with WPC finished surface even and fair all as specified and directed (NOTE : Supply only rate for WPC shall be measured and paid separately)

M&L for rendering 10mm thick on concrete surfaces of ceiling (Cement plaster 1:3), finish surface even and smooth without using extra cement.

M&L for 3 coats of white wash on walls including preparation of newly plastered surfaces complete all as specified and directed.

M&L for 3 coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specified and directed.

M&L for applying two coats of oil bound distemper over a coat of primer on walls including preparation of new plastered surface complete all as specified and directed.

M&L for complete removal of existing surface and applying three coats of white wash on old plaster surfaces of walls complete all as specified and directed.

All as per item No 8 above but on ceiling

M&L for preparation of new plaster surfaces and applying two or more coats of Acrylic smooth Exterior paint of required shade and applied over a coat of exterior primer @ 2.20 Kg/10 Sqm (Manufactured by Asian Paints) including preparation of surfaces on surfaces of walls.

M&L for preparation of old plaster surfaces and applying a coats of ACE Exterior paint (manufactured by Asian Paints) including preparation of surfaces on surfaces of walls.

M&L Complete removal of existing treatment of wall including corrices etc and making good of filling holes in plastered surfaces with POP mixed with distemper and applying two coat of distemper oil emulsion (OBD) over a coat of primer all as specified and directed.

M & L for applying cement based JK/ Birla/ Jenson & Nicholson wall care putty on walls/ ceilings to obtain a smooth surface including making good any undulations on new/old surfaces complete all as directed by Engineer in Charge

M&L for preparation of old painted wood and wood base surface of any discription not otherwise discribed over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L for two coats of synthetic enamel paint on old painted steel surface of any discription over 10cm width or girth including preparation of surfaces all as specified and directed.

M&L for applying a coat of epoxy resin on concrete surfaces @ 0.30 kg/Sqm including preparation of surfaces as per manufacture's instructions including removing of loose concrete/plaster complete all as specified and as directed. Make: (FAIR BOND EP) of Fairmate chemicals or equivalent of make pidilite/Forsroc.

M&L for welded mesh of weighing not less than 2.50 kg per sqm lathing of metal stubbing joint etc in ceilings, chajjas, beams & columns etc including all laps, cutting & waste complete all as specified and as directed.

M&L for applying guniting 25mm thick (average thickness) of cement and sand (fine grit) in ratio 1:3 mixed with chloride free spray concrete plasticizer as per manufacturer's instructions with guniting machine of pressure capacity not less than 5 Kg/Sqcm on concrete surface (excluding parapets in patches) area n.exe 5sqm in each patch at different site locations and surface finished fair and even to match existing with 5 mm plaster 1:4 complete all as specified and as directed. Make (SPRAY CRETE) of Fairmate chemicals or equivalent of Make Pidilite/Forsroc.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290. Grade E-165

Taking up or down steel tubing and connections including cleaning for refixing or removel to store (Bore of pipe in 15mm) complete all as specified and directed.

Ditto all as per item no 21 above but 20mm dia.

Ditto all as per item no 21 above but 25mm dia.

Supply & Fix on walls,/ceiling or laying in floors, CPVC pipes SDR 11& plain CPVC SDR 11 fittings complete all as specified. Outer dia of pipe 20mm

Supply & Fix on walls,/ceiling or laying in floors, CPVC pipes SDR 11& plain CPVC SDR 11 fittings complete all as specified. Outer dia of pipe 25mm

S&F in repair 20 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm-210 gms)

S&F in repair Bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed (15mm bore dia of pipe).

S&F in repair Stop valves cast copper alloy Chromium plated fancy type long sank concealed type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed (15mm bore dia of pipe).

S&F in repair 15mm dia Chromium plated angle valve high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed (15mm bore dia of pipe).

S &F in repair Vitreous China Squating pan, Orissa pattern, Size 580x440mm white with integral footrest etc complete all as specified.(including PVC low level 10 litres capacity flushing cistern & flush pipe).

S &F in repair Wash down water closet (Pedestal pattern) white with P or S trap including plastic water closet seat & cover mild steel chromium plated or aluminised hinging device , CP jet spray, PVC flushing cistern low level, 10 litres capacity, 32mm dia polyethylene flush pipe etc complete all as specified.

S&F in repair 15 mm dia Brass CP basin mixer for mixing hot & cold water screwed down for iron pipe including stainless steel connection.

S&F in repairs Rotational moulded polyethylene water storage tanks 1000 Litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all specified in SSR Part I Make : Sintex/ Polywell/ Polytuff. (Dismantling any type of tank included in the rate),

S &F in repair Vitreous China wash basin, white flat back, size 630x450mm excluding waste coupling pillar taps, waste, chain and plug and porcelain stopper but including GI brackets.

S&F in repair stainless steel kitchen sink with drainage board, made out of 1mm thick sheet, over all size 915 x 460mm with bowl size 410 mm x 330mm x 160mm, including fixing brackets, waste coupling, waste pipe, washers, connecting union etc complete all as specified and directed.Make : Nirali, Nilkhant,Diamond, Jayana, Prayag.

All as per item No. 32.00 but CP Bathing mixture valve.

S&F in repair Soap dish heavy duty fixed with stainless screws & PVC rawal plug complete all as specified and directed.

S & F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union.

S & F in repair brass chromium plated tubular towel rail 20 mm dia, D type, 60cm long between flages fixed with and including chromium plated brass screws and wooden/plastic cleats with flange complete all as specified and directed.

Taking down steel windows and ventilators with frame (without taking off shutters) complete area exc 1.5 sqm and n.exc 4 Sqm each removing from site of work all as directed by Engineer-in-Charge.

Taking down steel windows and ventilators with frame (without taking off shutters) complete area not exc 1.5 sqm each removing from site of work all as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.

S & F Sheet glass ordinary quality and glazing with oil putty, metal panel pins in square n exe 0.5 sq m in each pane (Thickness in 4.00mm)

S & F Sheet glass ordinary quality and glazing with oil putty, metal panel pins in square exe 0.5 sq m in each pane (Thickness in 4.00mm)

S&F 4mm thick figured glass, pin head type and glazing with oil putty, metal panel pins in square not exceeding 0.5 sqm each panel complete

S & F Sheet glass ordinary quality and glazing with oil putty, metal panel pins in square n exe 0.5 sq m in each pane (Thickness in 5.5mm)

S&F aluminium powder coated of approved shade frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (minimum thickness of powder coating 50 micron) complete all as specified.

S&F aluminium powder coated of approved shade frame for door window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges 100mm long type B-21 (2 no.) suitable handle (1 no.) to each shutter complete all as specified . powder coating of any colour as directed. (Thickness or powder coating not less than 50 micron) complete.

S&F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.

S & F grating doom 100 mm dia of PTMT (Minimum weight 25 gms)Make:Prayag

S & F grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) Make : Prayag

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm.

M&L for waste fittings, brass, chromium plated for glazed ware sinks , basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed 32mm.

S&F PVC waste pipe 32 mm dia for sink/wash hand basin standard quality complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap, plane with grating including jointing with solvant cement (Diameter of outlet 75mm).

Taking down eaves gutters and rainwater pipes (any sizee or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.,including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories)

S&F in repairs PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall (110mm bore)

All as per item no. 57 above but 75mm Bore.

S&F in repairs PVC (SWR) bends any radius with oval access door (75mm Each Bore).

All as per item No. 59.00 above but 110 mm dia.

S & F in repairs PVC (SWR) junction single (single T) equal or unequal 110mm dia.

S & F in repairs PVC (SWR) vent cowl 75mm dia.

Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L 100mm thick Cement concrete type C-2, 1:3:6(40mm graded aggregate) including necessary form work as path, passages, etc, surface finished even & fair without using extra cement & Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified.

M&L for 75mm thick PCC 1:3:6 type C2 in plinth protection with expansion joints 30x10 mm filled with mixture of hot bitumen and sand (Bays n.exe 1.50M).

M&L Chequered cement concrete tiles 300mm x 300mm x 25mm thick,set, jointed and pointed with grey cement and pigment in neat cement slurry in floors laid over 15mm thick screed bed in CM (1:4) over 75mm thick PCC (1:3:6) type C-2 (40mm graded stone aggregates) as in sub base complete all as specified and as directed.

Dismantling floor, hearth wall tiling including cement mortar bedding (but not backing) including removing rubbish off the premises complete.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. Sub base shall be measured and paid separately

M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) in floor etc.

M&L for Non Skid ceramic coloured joint free tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.11 Sqm but n. exc 0.18 sqm over 15mm thick screed bed in cement mortar 1:4 or bedding layer for laying in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for glazed ceramic coloured joint free tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.11 Sqm but n. exc 0.18 sqm over 10mm thick rendering in CM 1:4 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in approved colour or shade cement to match complete all as specified and directed.

M&L for Light shade vitrified ceramic tiles 10mm thick, (square or rectangular) polished, area of each tile exc 0.36 sqm but n. exc 0.42 Sqm . set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for Light shade vitrified ceramic tiles 10mm thick, (square or rectangular) polished, area of each tile exc 0.36 sqm but n. exc 0.42 Sqm over 10mm thick rendering in CM 1:4 on vertical surface such as skirting, dado, and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 18 to 20mm thick on 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 15mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Taking Down wooden Chowkats or frames not exe 1.5 sqm each with shutters (without taking off shutters from the frames).

Taking Down Chowkats or frames exe 1.5 sqm but n exc 4 sq.m each with shutters (without taking off shutters from the frames).

Taking down shutters of any descriptions exc 1 Sqm and n exc 2 sqm each.

Refixing shutter in same opening exc 1 sqm n exc 2 sqm

S&F Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified

Ditto all as per item no 79 above but size 125x60mm

M&L for 35mm thick 2nd class hard wood factory made glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers provided with stiles and rails as specified complete all as specified and directed.

S&F for 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L in repair for 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboard shutter complete all as specified and directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised. (Width of flaps (when open) in 30mm).

S&F in repairs 150 mm size MS stove enameled black helical door spring with roller plate long ordinary rat tail spring incl roller and roller plate complete

S & F Door closer hydraulically regulated, designation No 3 aluminium(Diecast) body universal type, suitable for dooor shutter of 851 to 1000 mm in width and of weight between 61 to 80Kgs and all as specified and directed

S&F factory made PVC door frames of size 50mmx47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suitable for opening as per site condition complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed.

S & F stainless steel butt hinges, medium weight, cold rolled stailess steel, and fixed (Size of hinges in 100 mm).

S&F 300 mm long Aluminum alloy, anodised sliding door bolts, plate type, and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminum alloy.

S&F 200 mm long Aluminum anodised barrel tower bolts of extruded section with stainless steel screws complete all as specified and directed.

Description all as per item No 91 above but 150 mm size.

S&F 150mm long extruded alluminim alloy handles, fabricated type, anodized with stainless steel screws complete all as specified and directed.

Description all as per item No 93 above but 100mm size.

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillars etc all as specified and as directed.

M&L for Brick work with sub class 'B' Old size bricks straight or corved plan exc 6 m mean radius built in CM (1:4) all as specified.

Cutting holes into or through brick walls built in cement mortar and walls of cement concrete and making good dismantaled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required( n exc 150sq cm)

S&F in repairs stainless steel plate rack for utensils of size 600 x 750 x 250 mm of approved pattern and design thickness of sheet 1mm all as directed.

Supply fix in repair stainless steel 25 mm dia rails(curtain rod), and fixing with stainless steel brackets and including decorative finial (lattoo) to sides of rods etc complete all as specified and directed.

Supply fix in repair premium quality of PVC slieves for hand rail for staircase of any size complete all as specified and directed.

S&F 150mm long Extruded brass handles, fabricated type polished complete all as specified and directed.

Dismantling of existing roof treatment any description including lime/cement concrete on roof slab and clean the surface as well including removal of debris away from the site complete all as specified and directed..

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in padding, bed plates or in mass and fair finishing the surface while concrete is green complete all as specified and directed.

M&L for Laying of APP membrane Waterproofing Treatment over mother slab : Providing and applying 2 layers of Fosroc Proofex Torchseal - 3PI STANDARD or Asian Paints Smartcare APP Membrane or equivalent in Sika/pidilite -3 mm thick Non-Woven Polyester mat reinforced APP Modified Bituminous membrane. The system is applied in Double layers (as per directed by Engr-in-Charge). Membrane to be overlapped for 100 mm sideways and 150 mm at the end laps with each having following specifications: (a) Membrane Thickness : 3 mm ( +/- 10%) (b) Tensile strength ASTM D5147 : > 400 N/ 5 cm ( L & T) (c) Tensile Tear Strength ASTM D4073 : 200 N/ 5 cm (d) Resistance to water pressure - DIN 52123 : No Leak (e) Elongation ASTM D5147 : >40%, (f) Water Tightness (EN 1928-1) kPa: 60m System includes Priming the substrate with Proofex Torchseal Primer / Proofex Smartcare Bitumen Primer or equivalent in Sika/pidilite ( at consumption 0.4 litres/sqm), Provision and application of 3 mm thick Proofex Torchseal of Fosroc/ Smartcare APP membrane of Asian paints or equivalent in Sika/pidilite in double layers and termination of the membrane at 450 mm from the Roof level in groove of 50 mm X 50 mm filled with NITOSEAL PU 50 of fosroc or smartcare hybrid PU sealant or equivalent in Sika/pidilite.

M&L 40mm thick brick tiles laid over 15mm thick screed bed in CM 1:6 and joints grouted flush in cement mortar 1:3 mixed with 5% or crude oil by weight of cement complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description,over 10cm in width or girth, including preparation of surfaces all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description,over 10cm in width or girth, including preparation of surfaces all as specified and directed.

Supply only integral water proofing compound.

Taking down carefully unserviceable point wiring copper / aluminium (light, fan, socket or power) complete, including removal of batten / conduit / gutties / wooden board etc., including fittings and fixtures such as switches, ceiling roses, regulators, sockets , light fittings, etc taken on credit and removal of unserviceable items out of site and making good the disturbed surfaces of walls, ceilings etc., complete all as specified and as directed.

Taking down carefully unservicable sub main wiring (4 Sqmm to 10 Sqmm size) including removal of batten/ conduit/ gutties/ wooden board etc and removal of unservicable items out of site complete all as specified and directed. Note: 2 runs of cable and one run earth wire will be measured as one length

Material & labour for point wiring complete with FRLS, PVC insulated unsheathed cable, 1100 volts grade confirming to IS-694, ISI marked, 1.5 Sq mm (nominal area) single core with copper conductor for phase and neutral, multistranded drawn through and including non metalic rigid PVC conduit of 20 mm dia and conduit accessories concealed in walls, floors, roofs etc, complete including moduler terminal box flush in wall with modular cover plate of required module for mounting switches, socket, fan regulator etc including provisioning of FRLS, PVC insulated un-sheathed 1100 volts grade, ISI Marked, 1.5 sq mm solid / multistranded copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed for the following.

One light / fan / bell point controlled by one switch

One 3 pin 5 Amps socket out let on independent board.

One 3 pin 5 Amps socket outlet on same board with other switches.

- ditto - same as item No. 111 above but with cables 4 Sq mm for point wiring and 4 Sq mm for earth continuity conductor all as specified and as directed for 15 A, 3/5 Pin socket outlet.

S&F Swich modular type single pole one module, 6 Amps complete all as specified directed

S&F Swich modular bell push 6A, 1 Module complete all as specified directed

S&F Swich modular type single pole one module, 16 Amps complete all as specified directed

S&F Socket outlet modular type, multipurpose, 5 pin single pole two module, 6 Amps complete all as specified directed.

S&F Socket outlet modular type, multipurpose, 5 pin single pole two module, 6 /16 Amps complete all as specified directed.

S & F decorative, wall mounting, champagne gold finish fixture with plastic body suitable and including 9 W LED lamp B22 base complete all as directed . Make: Havells Cat pat No LHFOECE1TZ1O014 or eqvt in CG/PHILIPS

Material & labour ceiling rose, 3 terminal, PVC / polycarbonate, isolated body all as specified.

Sub-main wiring with PVC insulated unsheathed cable, 1100 volts, grade multistranded fire retardant low smoke copper conductors, two runs of single core 4 sqmm conforming to IS-694, drawn through and including 25mm dia PVC conduit, conduit fittings and conduit accessories alongwith one run 4.00 sqmm PVC insulated single core multistranded fire retardant low smoke copper conductor cable as earth continuity conductor run along the pipe concealed on stone / brick wall and connecting to common earth dolly complete all as specified and as directed. Notes:- (a) Two runs of 4 sqmm cable and one run of 4 sqmm cable and one run of 25 mm PVC conduit will be measured as one length.(b) Cutting chases, making good and finishing to match surrounding surface is deemed to be included in the item rates quoted for sub-main wiring.

Sub-main wiring with PVC insulated unsheathed cable, 1100 volts, grade multistranded fire retardant low smoke copper conductors,two runs of single core 10 sqmm conforming to IS-694, drawn through and including 32mm dia PVC conduit, conduit fittings and conduit accessories alongwith one runs 10 sqmm PVC insulated single core multistranded fire retardant low smoke copper conductor cable as earth continuity conductor run along the pipe concealed on stone / brick wall and connecting to common earth dolly complete all as specified and as directed. Notes:- (a) Two runs of 10 sqmm cable and one runs of 10 sqmm cable and one run of 32mm PVC conduit will be measured as one length.(b) Cutting chases, making good and finishing to match surrounding surface is deemed to be included in the item rates quoted for sub-main wiring.

S & F TPN DBs DPX3 MCCB DBs suitable for DPX3 MCCB 160 Amps as incomer and 24 Nos MCB SP as outgoing ,double door ,IP 43 with metal door ,415 Vol,50Hz 8 way complete all as specified and directed. Notes:- (b) The cost of fixing the DB flush to brick / stone wall surface, including cutting holes / chases, packing around the DB with PCC 1:2:4, type B1 using 20mm graded stone aggregate, making good and finishing to match surrounding surfaces shall be deemed to be included in the quoted rates. (c) MCCBs & MCBs shall be measured and paid separately.

Material & Labour for MCCB TPN 160 Amps suitable for TPN DB DPX3 type as in item No 123, 415 volts, 25 KA, thermal magnetic type all as specifed.

S&F MCB DBs double door flush mounted 8 way SPN with 200 Amps rated copper bus bar 240 V.

Supply and fixing 40 Amp rating 240V, 10KA, miniature circuit breaker (MCB), SPN, complete with connection testing and commissioning.

Material & labour for MCB, SP, 240 volts, 40 Amps, 10 kA 'C' curve all as specified.

Material & labour for MCB, SP, 240 volts, 6 to 32 Amps, 10 kA 'C' curve all as specified.

Supply and fixing LED lights fitting 1x 18 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete

S & F LED light fitting 9W/10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

S&F Sheet metal enclosure with socket plug top and MCBs single pole with a two pin and earth plug and socket complete with one single pole MCB of "C" series of cap 16-32 Amp including taking out the old one all as specified and directed Make - Legrand / C&S/ Havells/Anchor

Supply & fix ventilation fan, working on single phase, 230 Volts, 50 Hz of sweep 200 mm with louvers complete including fixing arrangement including grouting of Bolts in wall etc all as specified and as directed.

Taking down fan, ceiling fan and dismantling the blades and removing fan and blades to store or for rewinding reassembling the same complete all as specified and directed. (Rewinding to be measured under item No. 134)

M&L for rewinding of ceiling fan with super enamelled copper winding wire of existing size of ceiling fan 1200 mm sweep including Cleaning, washing, greasing, oiling, painting and write MES No. with black paint etc complete all as specified and directed.

Refixing ceiling fan and connecting up including providing of cable from ceiling rose or connector to fan.

M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead wire of 4 mm dia as earthing lead by means of bolts, nuts, check-nuts, and washers of galvanised iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe medium grade 15 mm bore for protection of GI wire from earth electrode to DB/test point /machinery / equipment. supplying and laying charcoal dust comman salt PCC (1:2:4) type B1 using 20 mm graded stone agregrate chamber and RCC cover 54 cm X 54cm x50 mm thick (1:2:4) type B-1 using 20 mm stone aggregate ) reinforced with 8 mm dia TMT bars @ 75mm C/C both ways with mild steel handle 12 mm dia, using round bar ,PGI funnel with wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No-3 of SSR part-1 including testing and taking out the old one complete all as specified and directed Note - Cost of GI wire and GI protection pipe up to a distance 7.5 M shall be included in quated rate of above Items Make of ISI marked GI pipe: Jindal / TATA / BANSAL

Supply and fix Door Bell, AC, 230V, single pole ding dong type

S&F 5.5 mm thick looking mirror beveled edge of size 600mm x 750 mm fixed with CP decorative screws complete all as specified and directed.

S&F hand faucit including PVC connection pipe with CP nuts complete all as specified and directed.

S&F stop valve PTMT 25mm dia complete all as specified and directed.

S&F mortice lock brass 50mm with duplicate key for CB shutters complete all as specified and directed.

S&F magnets catch for CB shutters complete all as specified and directed.

S&F 100 mm aluminium floor door stopper double with rubber shoe fixed with stainless steel screw complete all as specified and directed.

S&F PVC cleat of 50 mm long for door shutters fixed to walls with stainless steel screw complete all as specified and directed.

Pradeep Bros

HIND CONSTRUCTIONS

garg construction company

Krishna Constructions

R.C. Magla and Co.