Construction of 02 No. additional classrooms at Govt. High School Muthi Jammu. Construction of Science Lab at Govt. High School Muthi Jammu and Construction of Library FF at Govt. High School Muthi Jammu

Construction of 02 No. Additional classrooms at Govt. High School Muthi Jammu.

Earthwork in excavation by manual means in trenches for foundation,drains, pipes,cables etc(not exceeding 1.5 mt in width)and for shafts,wells cesspits and the like not exceeding 10sqm on plan depth up to 1.5mt including disposal of excavated earth up to 1 mt from cutting edge disposed earth to be levelled and neatly dressed. All kinds of soils .

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- all works upto plinth level 1:5:10 (1 cement 5 coarse sand 10 graded stone agg. 40 mm nominal size) crushed

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- all works upto plinth level 1:3:6(1 cement 3 coarse sand 6 graded stone agg. 20 mm nominal size) crushed

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering. shuttering, finishing and reinforcement-All work upto plinth level 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in foundation and plinth cement mortor 1:6 (1 cement 6 coarse sand and extra for brick work in super structure above plinth level up floor 5 level (by manual means)

Providing and laying in position cement concrete of specofied grade of reinforced cement concrete, excluding the cost of centering and shuttering, M-20(1:1.5:3) grade, with 20mm nominal size of crushed stone aggregates.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centring and Shuttering including strutting, propping etc and removal of form work for

foundation , footings , basis of columns etc. for mass concrete.

Suspended floors, roofs , landings , balconies and access platform.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Lintels, beams ,plinth beams, girders, bressumers and centilevers.

Edges of Slabs and Break in floors and walls under 20 cm wide

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Sal wood

Providing and fixing M.S grills of required pattern in frames of windows etc with M.S flats, square or round bars etc including priming coat with approved steel primer all complete Fixed to openings / wooden frames with rawl plugs screws etc.

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand 4 graded stone aggregate 12. 5mm nominal size) Crushed

12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand)

15mm thick Cement plaster in 1:6 (1 cement : 6 fine sand), .

6mm thick plaster in 1:3, Mix. Ceiling

Providing and fixing glazed shutters for doors,windows and clerestory windows using 10 Kg/sqm (4mm thick) float glass pains including ISI marked M.S. pressed but hinges bright fineshed of required size with necessary screws. 35 mm thick First class kail wood.

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class kail wood 35mm

Providing and fixing panelled or panelled and glazedshutters for doors, windows and clerestory windowsincluding lSI marked M.S. pressed Butt hinges brightfinished of required size with necessary screws excludingpanelling which will be paid for separately,al! completeas per direction of engineer- in charge. First class kail wood 35Sqm thick

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Particle Board 12mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:Kiln seasoned & chemically treated hallock wood 50x12mm

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete ( Size of tile 60x60cm )

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600 mm

Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacture in all shades. New Work

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10sqm

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick

Making plinth protection 50mm thick with cement conc. (1:3:6), 20mm nominal size of stone aggregates over 75mm bed of dry brick ballast, 40mm nominal size of well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion 110mm dia

PVC 110 mm pipe

Coupler 110mm

Bend 110mm

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Engagement of painter for writing name of school,logo and making India map and charts on wall.

Making Blackboard (1 no.)one in each class room in cm (1:4) with side patti complete in all respect as per drawing (paid as L S).

Providing and fixing wiring for light point/ fan point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with switches 6A, Fan regulator, plates, G.I box including supply of wiring, holders, Fan box, including LED bulb 9 watt, PVC conduit with SPN of 63 amp and MCB (10, 16 amp as per load) &4.0 sq mm wire from main board to room board, of make Anchor / Havells all job complete.

Providing and fixing wiring for power point with 2.5 sq mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with switches 16A, plates, G.I box including supply of wiring, 16 amp socket, PVC conduit with MCB (32 amp as per load) & of make Anchor, Havells, Crompton, Orient, Bajaj all job complete.

Supply, installation, testing and commissioning of Ceiling Fan 3 Star Rated with Voltage 5.3 Cu.m/min/watt, Aluminium Blades, including wiring the down rods of standard length (upto 45cm) with 1.5 sq mm FR PVC insulated copper conductor, single core cable including providing and fixing phenolic laminated sheet cover on the Fan Box etc as required of make Anchor, Havells, Crompton, Orient, Bajaj all job complete.

Supply, installation, testing and commissioning 320 Cum/Hr AC 220-240 Volts 50 Hz exhaust fan made out of ABS Plastic with inbuilt thermo cutoff Protection and Noise Level not exceeding 37 dB of Following Sizes including connection etc. complete as required. 450 mm

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 asper IS:1868) transparent or dyed to required colour or shade with nuts and screws etc. complete

Sliding Door bolts 300x16mm

tower bolts 200x10mm

tower bolts 150x10mm

tower bolts 100x10mm

handle 125mm

handle 100mm

Twin rubber stopper

Carriage of materials by mechanical transport inculding loading / unloading and stacking complete.

Sand average lead up to 10 kms.

Stone aggregate below 40 mm average lead up to 10 kms.

Bricks average lead up to 10kms

Construction of Science lab at Govt. High School Muthi Jammu.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- all works upto plinth level 1:3:6(1 cement 3 coarse sand 6 graded stone agg. 20 mm nominal size) crushed

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in foundation and plinth cement mortor 1:6 (1 cement 6 coarse sand and extra for brick work in super structure above plinth level up floor 5 level (by manual means)

Providing and laying in position cement concrete of specofied grade of reinforced cement concrete, excluding the cost of centering and shuttering, M-20(1:1.5:3) grade, with 20mm nominal size of crushed stone aggregates.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centring and Shuttering including strutting, propping etc and removal of form work for

Suspended floors, roofs , landings , balconies and access platform.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Lintels, beams ,plinth beams, girders, bressumers and centilevers.

Edges of Slabs and Break in floors and walls under 20 cm wide

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Sal wood

Providing and fixing M.S grills of required pattern in frames of windows etc with M.S flats, square or round bars etc including priming coat with approved steel primer all complete Fixed to openings / wooden frames with rawl plugs screws etc.

Half brick masonry with bricks of class designation 75 in foundations and plinth in Cement mortar 1 :4 ( 1 cement : 4 coarse sand) extra for half brick work in superstructure above plinth level upto floor 5 level

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand 4 graded stone aggregate 12. 5mm nominal size) Crushed

12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand)

15mm thick Cement plaster in 1:6 (1 cement : 6 fine sand), .

6mm thick plaster in 1:3, Mix. Ceiling

Providing and fixing glazed shutters for doors,windows and clerestory windows using 10 Kg/sqm (4mm thick) float glass pains including ISI marked M.S. pressed but hinges bright fineshed of required size with necessary screws. 35 mm thick First class kail wood.

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class kail wood 35mm

Providing and fixing panelled or panelled and glazedshutters for doors, windows and clerestory windowsincluding lSI marked M.S. pressed Butt hinges brightfinished of required size with necessary screws excludingpanelling which will be paid for separately,al! completeas per direction of engineer- in charge. First class kail wood 35Sqm thick

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Particle Board 12mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:Kiln seasoned & chemically treated hallock wood 50x12mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete ( Size of tile 60x60cm )

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacture in all shades. New Work

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10sqm

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion 110mm dia

PVC 110 mm pipe

Coupler 110mm

Bend 110mm

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:5:10 (1 cement : 5 coarse sand : 10 graded brick aggregate 40 mm nominal size

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40mm C.P. brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the walls wherever required :Size 600x450x200 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.

Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.25mm nominal outer dia pipes.

32mm nominal outer dia pipes.

External work including trenching, refilling etc. 25mm nominal outer dia pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing 20mm nominal outer dia pipes.

Providing and fixing uplasticized PVC connection pipe with brass unions 30 cm length 15 mm nominal bore

Providing & fixing C.P brass angle valve for basin mixer and geyser points of approved make conforming to IS:8931 (15mm nominal bore)

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore

Proving and laying in position floor trap inculding all fittings , complete job.

Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Flexible pipe 32 mm dia

Supplying and fixing CI cover with frame for manholes.

Providing and laying in position pvc drainage pipe including all fitting , complete job. 4 " dia

Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore 125 mm long foam flow, weighing not less than 120 gms.

Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design.

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS:4457, complete as per direction of Engineer-in-charge In flooring on a bed of 10mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)

Making khurras 45*45cm with average minimum thickness of 5 cm cemnt concrete 1:2:4(1 cement 2 coarse sand 4 graded stone agg. Of 20mm nominal size) over pvc sheet 1m*1m*400 micron finished with 12mm cement plaster 1:3 (1 cement 3 coarse sand) and a coat of neat cement rounded the edges and making and finishing the outlet complete

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Making Blackboard (1 no.)one in each class room in cm (1:4) with side patti complete in all respect as per drawing (paid as L S).

Providing and fixing wiring for light point/ fan point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with switches 6A, Fan regulator, plates, G.I box including supply of wiring, holders, Fan box, including LED bulb 9 watt, PVC conduit with SPN of 63 amp and MCB (10, 16 amp as per load) &4.0 sq mm wire from main board to room board, of make Anchor / Havells all job complete.

Supply, installation, testing and commissioning of Ceiling Fan 3 Star Rated with Voltage 5.3 Cu.m/min/watt, Aluminium Blades, including wiring the down rods of standard length (upto 45cm) with 1.5 sq mm FR PVC insulated copper conductor, single core cable including providing and fixing phenolic laminated sheet cover on the Fan Box etc as required of make Anchor, Havells, Crompton, Orient, Bajaj all job complete.

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 asper IS:1868) transparent or dyed to required colour or shade with nuts and screws etc. complete

Sliding Door bolts 300x16mm

tower bolts 200x10mm

tower bolts 150x10mm

tower bolts 100x10mm

handle 125mm

handle 100mm

Twin rubber stopper

Carriage of materials by mechanical transport inculding loading / unloading and stacking complete.

Sand average lead up to 10 kms.

Stone aggregate below 40 mm average lead up to 10 kms.

Bricks average lead up to 10kms

Construction of Library (FF) at Govt. High School Muthi Jammu.

Earthwork in excavation by manual means in trenches for foundation,drains, pipes,cables etc(not exceeding 1.5 mt in width)and for shafts,wells cesspits and the like not exceeding 10sqm on plan depth up to 1.5mt including disposal of excavated earth up to 1 mt from cutting edge disposed earth to be levelled and neatly dressed. All kinds of soils .

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- all works upto plinth level 1:5:10 (1 cement 5 coarse sand 10 graded stone agg. 40 mm nominal size) crushed

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- all works upto plinth level 1:3:6(1 cement 3 coarse sand 6 graded stone agg. 20 mm nominal size) crushed

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering. shuttering, finishing and reinforcement-All work upto plinth level 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in foundation and plinth cement mortor 1:6 (1 cement 6 coarse sand and extra for brick work in super structure above plinth level up floor 5 level (by manual means)

Providing and laying in position cement concrete of specofied grade of reinforced cement concrete, excluding the cost of centering and shuttering, M-20(1:1.5:3) grade, with 20mm nominal size of crushed stone aggregates.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centring and Shuttering including strutting, propping etc and removal of form work for

foundation , footings , basis of columns etc. for mass concrete.

Suspended floors, roofs , landings , balconies and access platform.

Stairs (excluding landings) except spiral staircases.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Lintels, beams ,plinth beams, girders, bressumers and centilevers.

Edges of Slabs and Break in floors and walls under 20 cm wide

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Sal wood

Providing and fixing M.S grills of required pattern in frames of windows etc with M.S flats, square or round bars etc including priming coat with approved steel primer all complete Fixed to openings / wooden frames with rawl plugs screws etc.

12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand)

15mm thick Cement plaster in 1:6 (1 cement : 6 fine sand), .

6mm thick plaster in 1:3, Mix. Ceiling

Providing and fixing glazed shutters for doors,windows and clerestory windows using 10 Kg/sqm (4mm thick) float glass pains including ISI marked M.S. pressed but hinges bright fineshed of required size with necessary screws. 35 mm thick First class kail wood.

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class kail wood 35mm

Providing and fixing panelled or panelled and glazedshutters for doors, windows and clerestory windowsincluding lSI marked M.S. pressed Butt hinges brightfinished of required size with necessary screws excludingpanelling which will be paid for separately,al! completeas per direction of engineer- in charge. First class kail wood 35Sqm thick

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Particle Board 12mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:Kiln seasoned & chemically treated hallock wood 50x12mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete ( Size of tile 60x60cm )

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work

Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacture in all shades. New Work

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10sqm

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion 110mm dia

PVC 110 mm pipe

Coupler 110mm

Bend 110mm

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:5:10 (1 cement : 5 coarse sand : 10 graded brick aggregate 40 mm nominal size

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Making khurras 45*45cm with average minimum thickness of 5 cm cemnt concrete 1:2:4(1 cement 2 coarse sand 4 graded stone agg. Of 20mm nominal size) over pvc sheet 1m*1m*400 micron finished with 12mm cement plaster 1:3 (1 cement 3 coarse sand) and a coat of neat cement rounded the edges and making and finishing the outlet complete

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing wiring for light point/ fan point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with switches 6A, Fan regulator, plates, G.I box including supply of wiring, holders, Fan box, including LED bulb 9 watt, PVC conduit with SPN of 63 amp and MCB (10, 16 amp as per load) &4.0 sq mm wire from main board to room board, of make Anchor / Havells all job complete.

Providing and fixing wiring for power point with 2.5 sq mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with switches 16A, plates, G.I box including supply of wiring, 16 amp socket, PVC conduit with MCB (32 amp as per load) & of make Anchor, Havells, Crompton, Orient, Bajaj all job complete.

Supply, installation, testing and commissioning of Ceiling Fan 3 Star Rated with Voltage 5.3 Cu.m/min/watt, Aluminium Blades, including wiring the down rods of standard length (upto 45cm) with 1.5 sq mm FR PVC insulated copper conductor, single core cable including providing and fixing phenolic laminated sheet cover on the Fan Box etc as required of make Anchor, Havells, Crompton, Orient, Bajaj all job complete.

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 asper IS:1868) transparent or dyed to required colour or shade with nuts and screws etc. complete

Sliding Door bolts 300x16mm

tower bolts 200x10mm

tower bolts 150x10mm

tower bolts 100x10mm

handle 125mm

handle 100mm

Twin rubber stopper

Carriage of materials by mechanical transport inculding loading / unloading and stacking complete.

Sand average lead up to 10 kms.

Stone aggregate below 40 mm average lead up to 10 kms.

Bricks average lead up to 10kms

Please Enable Macros to View BoQ information