GE ELECT/D-22/2024-25

Amount

Taking down/up existing HT unserviceable cable of any size from trench/pole etc complete all as specified and directed by Engr-in-Charge.

Labour and T&P only for relaying the 11 KV HT cables of any size in any position complete all as specified and directed by Engr-in-Charge.

Supplying, laying, jointing testing and connecting in replacement of 11 KV HT 300 Sqmm 3 Core XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) of following size with multistranded aluminum conductors, 11 KV grade, IS 7098 marked, laid in trenches fixed to pole, including jointing & testing complete all as specified and directed by Engr-in-Charge.

Supplying, laying, jointing testing and connecting in replacement of 11 KV HT 185 Sqmm 3 Core XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) of following size with multistranded aluminum conductors, 11 KV grade, IS 7098 marked, laid in trenches fixed to pole, including jointing & testing complete all as specified and directed by Engr-in-Charge.

M&L for boring of holes under road/pavement/hard standing by trenchless technology using ultra sound technique and necessary machine including material and labour for HDPE pipe of 160 mm dia suitable for 04 Kg/cm working pressure. Wall thickness of pipe not less than 6.5 mm complete all as specified and directed by Engr-in-Charge. Note : Contractor should obtained prior permission from NHAI / IGL / DCB or any authority whose services are affected while executing the said item.

Excavation in trenches in soft and loose soil n.exc 1.5 mtr wide and n.exc. 1.5 mtr depth not exceeding 10 sqm in plan for laying of cables or GI pipe and getting out including leveling of bottom surface to required level complete as specified and directed by Engineer –in-charge.

Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm thick complete as specified and directed by Engineer –in-charge.

Removing excavated material not exceeding 50 mtr away and depositing where directed at a level n. exc 1.5 mtr above the starting point complete as specified and directed by Engineer –in-charge.

Supply and laying in replacement unreinforced precast concrete cable covers class HV Type -1 with flat type size 300 x 180 x 40 mm complete as specified and directed by Engineer –in-charge.

All as per Srl Item no 09 but Laying only old HT cable cover obtained from excavation complete as specified and directed by Engineer –in-charge.

Material & labour for river washed and screened dry sand for filling under and above the under ground cable for cushioning of cables etc. complete all as specified and directed by engr –in-charge, Note : Measurement shall be taken after punning down.

Supply and fix in replacement of Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 300 Sqmm complete as specified and directed by Engineer –in-charge.

Supply and fix in replacement of Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 185 Sqmm complete as specified and directed by Engineer –in-charge.

M&L for laminated radium paper stiker of letter size 25mm x 8mm in Red colour and printing of SM/MES No/feeder name/CT ratio etc as provided by Enginner-in-charge and pasting the same on HT/LT panel complete as specified and directed by Engineer –in-charge. Note: Each stiker shall have different printing matter.

Dismantling of any type and any size of HT RCC/PCC poles complete as specified and directed by Engineer –in-charge.

M&L for writing SM/MES No letter of size 5 cm in height in white colour paint on transformer as specified & directed by Engineer –in-charge. Note: One SM/MES No may contain 15-20 alphabat/Numbers

S&F in replacement of unserviceable ACB 4 pole, 415 V, with (Manual Drawout type Microprocessor type) of capcity 800 Amp breaking capacity 50 KA complete as specified and directed by Engineer –in-charge.

Note : contractor should procure and provide 50 % of the material as listed above within 15 days of the placing of work order and shall be verified by the Engr-in-charge.

Rajindera Enterprises

Ridhi engineers and builders

ALLIED CONSTRUCTION

Commercial Traders

MV Engineers And Contractors

mayur enterprises

Vijay Electricals

Microsys Controls India