Furniture and furnishing at DFMU Sheohar PL, DFMU Sitamarhi PL, DFMU Bagaha PL, DFMU Motihari PL - RFSL West Champaran under Motihari Division

1 Bid Security Amount - Minimum 2% of Allocated Amount Bid Security Amount - Rs.

Cost of Documents Cost of Docs. -Rs.

2 PAN (Permanent Account Number)

3 GST Registration No

4 A-ISO 9001-2015 B-ISO 14001-2015 C-ISO 50001-2018 D -BIFMA Membership E-AIOTA F- Bifma Level 2

5 Similar nature of Work: (i) Single order of 100% of estimated bid value; or (ii) Two orders of at least 50% each of estimated bid value; or (iii) Three orders of at least 35% each of estimated bid value. Work completion certificate by respective Organization for the above Orders should be uploaded with bid. Attached experience certificate:-The Experience certificate should be issued by the authority not less than the Rank of EE. In case of Public sector firm certificate issued by head of the institution .

6 Work Experiences : The Bidder or its OEM {themselves or through reseller(s)} should have regularly, manufactured and supplied same or similar Category Products to any Central / State Govt Organization / PSU for 3 years before the bid opening date. Attached experience certificate:- The Experience certificate should be issued by the authority not less than the rank of EE. In case of Public Sector/Private Sector the certificate issued by head of the institution.

7 Minimum financial Requirements: executed ONE single/supply work of Minimum 50% of quoted amount in Government sector/PSU within last 5 financial years. Tenderer must submit proof

8 Financial Qualification Requirements for Proceeding 03 Consecutive Years: a. Bidder Turn Over Criteria: The minimum average annual financial turnover of the bidder during the last three years, ending on 31st March of the previous financial year, should be 100.00 Lac b. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years, ending on 31st March of the previous financial year, should be 400.00 Lac . Tenderer shall submit audited financial statement (Profit Loss Statement) duly attested / certified by CA.

Name of work : - Furniture and furnishing at DFMU Sheohar PL, DFMU Sitamarhi PL, DFMU Bagaha PL, DFMU Motihari PL - RFSL West Champaran under Motihari Division

Regional Forensic Science Lab

S.No. Items Qty 1 Nos

1 Executive High Back Chair- SEAT ASSEMBLY : The Cushioned seat is made of Injection molded Plastic outer & inner. Plastic Inner is upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression, Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D), BACK ASSEMBLY: The Cushioned back is made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette HIGH BACK SIZE: 47.7 cm. (W) x 76.4 cm. (D) , The armrest top is moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism is designed with the following features: 360' revolving type, Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort, Tilt tension adjustment can be operated in seating position, 5-position Tilt limiter giving option of variable tilt angle to the chair, The mechanism housing is made up of HPDC Aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5 cm, ADJUSTABLE BACK SUPPORT : Back Frame is connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need, Overall Size-76.1W x 76.1D x 112.7-130.2H x 43.1 -53.1 SH cm (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 1

2 Executive Visitor Chair: CHAIR UPPERSTRUCTURE: It is a single shell 1.2 ±0.1cm.thick hot pressed plywood with moulded polyurethane foam on top & backing foam on rear side. It is upholstered with option of knitted & leatherette fabric.The seat has extra thick foam on front edge to give comfort to popliteal area. SEAT & BACK HIGH RESILIENCE (HR) POLYURETHANE FOAM :The HR polyurethane foam for seat and back is moulded with density 45 +/-2 kg/m³ and Hardnessload 16 ± 2 kgf as per IS:7888 at 25% compression.M.S. VISITOR TUBULAR FRAME (For Visitore chair): The powder coated (DFT 40-60 micron) tubular frame is cantilever type & made of Ø2.54±0.03 cm x 0.2±0.016 cm thk MS ERW tubeARMRESTS:The armrest top is moulded from polyurethane(PU) with metal insert and mounted on to a tubular frame. Size- WIDTH (W): 60.5 CM. DEPTH (D): 65.0 CM. HEIGHT (H): 86.5 CM. SEAT HEIGHT (SH): 46.0 CM. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 10

3 Executive Table of size (2400 X 1050 X 750) with ERU attached Pedestal: size: 2400 W * 1050 D * 750 H TOP THICKNESS – 65 mm, MODESTY- Size : 1640 X 600 X16 MM , MDF+ Veneer + PU Coating, MOBILE PEDESTAL- MDF + Veneer + PU Coating , Size :510W * 635H * 445D mm, ERU TOP- MDF + VENEER + PU Coating, Size :1200 W x 445 D x 660 HTOP THICKNESS – 25 mm. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 1

4 Computer Table with Chair: size 1200 (W) x 600 (D) x 750 (H) made of 18mm thick Pre-Laminated Board with PVC edge banding. Panel of 18mm thick Pre-Laminated Board with Single extrusion slide for Key Board fitted with 4 Nos. Caster. Midback Chair: Seat/Back Assembly- The seat and Back are made up of 1.2+-0.1 CM thick hot pressed plywood messeard as per QA method described in QCP -QLTA-P14-18 and upholstred with fabric and moulded Polyurethene foam together with seat and back covers. The back foam is designed with contured lumber support for extra comfort. Back Size - 45.0 cm(W) x 53.0 cm (H). Seat Size- 52.0 cm(W) x 48.0 cm (D). High Resilience (HR) Polyurethene Foam-- The HR polyurethene foam is moulded with density +45+-2kg/m3 and hardness load 16+-2 kgf as per IS:7888 for 25% compression. Seat /Back Covers: The seat and Back Covers are injectoion moulded in black Co-polymer polyprplyne. Armrest Assembly- The one piece armrest are made of black integral skin polyurethene reinforced with M.S insert with 50-70 shore 'A' hardness. The armrest are scrtch nd weather resistant. The armrest are fitted to the seat with armrest brackets made of 0.5+-0.05 cm thick HR steel. Pedestal Asembly- The pedestal Assembly is fabricated from 0.2+- 0.02 cm thick HR sheet powder coated and fitted with an injection molded black polypreplyne hub cap and 5 nos twin wheel castors. The pedestal is 60.0 +-0.5cm pitch-centre dia (70.0+-1.0cm with castors). Twin Wheel Castors- The twin wheel castors are injection moulded in black nylon. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 1

Deputy Director Room

1 Mesh Highback Chair: SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-pressedplywood and upholstered with fabric upholstery covers and moulded Polyurethane foam.The seat has extra thick foam on front edge to give comfort to popliteal area.The Back is injection moulded in glass filled Polypropylene which is upholstered withMesh fabric.The back consist of adjustable lumbar support made of injection mouldedPolypropylene having an adjustment of 5.0 ±0.1 cm HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam ismoulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25%compression. ARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range)· Armrest top is mounted on Armrest structure made of glass filled Nylon· Armrest Top is PU moulded over glass filled Nylon insert.CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features:360° revolving type.· 3 position locking with anti shock mechanism.· Tilt tension adjustment HEADREST: The Headrest sub-assembly is made up of injection moulded glass filledPolypropylene which is upholstered with moulded HR polyurethane foam and fabric. It has an adjustment of 4.0 ± 0.1cm & it is assembled over mesh back chair.The complete headrest assembly is retro fit to the main chair PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with anadjustment stroke of 9.5 ± 0.3cm.TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 1

2 Executive Visitor Chair: CHAIR UPPERSTRUCTURE: It is a single shell 1.2 ±0.1cm.thick hot pressed plywood with moulded polyurethane foam on top & backing foam on rear side. It is upholstered with option of knitted & leatherette fabric.The seat has extra thick foam on front edge to give comfort to popliteal area. SEAT & BACK HIGH RESILIENCE (HR) POLYURETHANE FOAM :The HR polyurethane foam for seat and back is moulded with density 45 +/-2 kg/m³ and Hardness load 16 ± 2 kgf as per IS:7888 at 25% compression.M.S. VISITOR TUBULAR FRAME (For Visitore chair): The powder coated (DFT 40-60 micron) tubular frame is cantilever type & made of Ø2.54±0.03 cm x 0.2±0.016 cm thk MS ERW tubeARMRESTS:The armrest top is moulded from polyurethane(PU) with metal insert and mounted on to a tubular frame. Size- WIDTH (W): 60.5 CM. DEPTH (D): 65.0 CM. HEIGHT (H): 86.5 CM. SEAT HEIGHT (SH): 46.0 CM. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 3

3 Table of size (1800 x 900 x 750) with ERU attched PDL: MAIN TOP- MDF + VENEER + PU Coating, Size :1800 W * 900 D * 750 H TOP THICKNESS – 65 mm, MODESTY- Size : 1640 X 600 X16 MM , MDF+ Veneer + PU Coating, MOBILE PEDESTAL- MDF + Veneer + PU Coating , Size :510W * 635H * 445D mm, ERU TOP- MDF + VENEER + PU Coating, Size :1200 W x 445 D x 660 HTOP THICKNESS – 25 mm (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 1

4 Computer Table with Chair: size 1200 (W) x 600 (D) x 750 (H) made of 18mm thick Pre-Laminated Board with PVC edge banding. Panel of 18mm thick Pre-Laminated Board with Single extrusion slide for Key Board fitted with 4 Nos. Caster. Midback Chair: Seat/Back Assembly- The seat and Back are made up of 1.2+-0.1 CM thick hot pressed plywood messeard as per QA method described in QCP -QLTA-P14-18 and upholstred with fabric and moulded Polyurethene foam together with seat and back covers. The back foam is designed with contured lumber support for extra comfort. Back Size - 45.0 cm(W) x 53.0 cm (H). Seat Size- 52.0 cm(W) x 48.0 cm (D). High Resilience (HR) Polyurethene Foam-- The HR polyurethene foam is moulded with density +45+-2kg/m3 and hardness load 16+-2 kgf as per IS:7888 for 25% compression. Seat /Back Covers: The seat and Back Covers are injectoion moulded in black Co-polymer polyprplyne. Armrest Assembly- The one piece armrest are made of black integral skin polyurethene reinforced with M.S insert with 50-70 shore 'A' hardness. The armrest are scrtch nd weather resistant. The armrest are fitted to the seat with armrest brackets made of 0.5+-0.05 cm thick HR steel. Pedestal Asembly- The pedestal Assembly is fabricated from 0.2+- 0.02 cm thick HR sheet powder coated and fitted with an injection molded black polypreplyne hub cap and 5 nos twin wheel castors. The pedestal is 60.0 +-0.5cm pitch-centre dia (70.0+-1.0cm with castors). Twin Wheel Castors- The twin wheel castors are injection moulded in black nylon. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 1

Assistant Director

1 Executive Highback Chair: SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA methoddescribed in OCP-QLTA-P14-18 and upholstered with Leatherette upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. Theseat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair.*HIGH BACK SIZE 51.5 cm. (W) x 82.0 cm. (H) ARMRESTS ( Executive CHAIR) : The 3-way adjustable armrest is is made of die-castaluminium with buffing finish designed with the following features :• Up-Down adjustment–7 steps (7.0 ± 0.5cm range) • It has to & fro movement along with Swivel adjustment CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features:• 360° revolving type.• 3 position locking with anti shock mechanism.• Tilt tension adjustment PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm PEDESTAL ASSEMBLY : The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 4

2 Executive Visitor Chair: CHAIR UPPERSTRUCTURE: It is a single shell 1.2 ±0.1cm.thick hot pressed plywood with moulded polyurethane foam on top & backing foam on rear side. It is upholstered with option of knitted & leatherette fabric.The seat has extra thick foam on front edge to give comfort to popliteal area. SEAT & BACK HIGH RESILIENCE (HR) POLYURETHANE FOAM :The HR polyurethane foam for seat and back is moulded with density 45 +/-2 kg/m³ and Hardness load 16 ± 2 kgf as per IS:7888 at 25% compression.M.S. VISITOR TUBULAR FRAME (For Visitor chair): The powder coated (DFT 40-60 micron) tubular frame is cantilever type & made of Ø2.54±0.03 cm x 0.2±0.016 cm thk MS ERW tubeARMRESTS:The armrest top is moulded from polyurethane(PU) with metal insert and mounted on to a tubular frame. Size- WIDTH (W): 60.5 CM. DEPTH (D): 65.0 CM. HEIGHT (H): 86.5 CM. SEAT HEIGHT (SH): 46.0 CM. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 12

3 Table of size (1800 x 900 x 750) with ERU attched PDL: MAIN TOP- MDF + VENEER + PU Coating, Size :1800 W * 900 D * 750 H TOP THICKNESS – 65 mm, MODESTY- Size : 1640 X 600 X16 MM , MDF+ Veneer + PU Coating, MOBILE PEDESTAL- MDF + Veneer + PU Coating , Size :510W * 635H * 445D mm, ERU TOP- MDF + VENEER + PU Coating, Size :1200 W x 445 D x 660 HTOP THICKNESS – 25 mm (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 4

4 Linear Recta Workstation for 2 Person of size (1200 x 600) with Pedestal, KBPT & CPU Trolley & with 2 No. Chairs: Providing and placing spine and fin based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium trims. FIN: out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with laminate at intermediate level. Top block finished in fabric finish. Bottom block is finished in metal finish. Tiles on main spine: Combination of top tiles are fabric tile. Bottom tiles - Plain metal. SPLIT Tiles on main spine: Combination of two finishes for the top tiles on the user side shall be split fabric tackable along with split white board. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in DL + DL finsh. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1200 mm w x 750 mm d. Pedestals with legs - Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors . KBPT with mousetray - metal. Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring. The Product shall be as per specification mentioned above & as per direction of Engineer-in-Charge. (Conforming to Godrej or Equivalent Manufacture as per approved make list. Midback Chair: Seat/Back Assembly- The seat and Back are made up of 1.2+-0.1 CM thick hot pressed plywood messeard as per QA method described in QCP -QLTA-P14-18 and upholstred with fabric and moulded Polyurethene foam together with seat and back covers. The back foam is designed with contured lumber support for extra comfort. Back Size - 45.0 cm(W) x 53.0 cm (H). Seat Size- 52.0 cm(W) x 48.0 cm (D). High Resilience (HR) Polyurethene Foam-- The HR polyurethene foam is moulded with density +45+-2kg/m3 and hardness load 16+-2 kgf as per IS:7888 for 25% compression. Seat /Back Covers: The seat and Back Covers are injectoion moulded in black Co-polymer polyprplyne. Armrest Assembly- The one piece armrest are made of black integral skin polyurethene reinforced with M.S insert with 50-70 shore 'A' hardness. The armrest are scrtch nd weather resistant. The armrest are fitted to the seat with armrest brackets made of 0.5+-0.05 cm thick HR steel. Pedestal Asembly- The pedestal Assembly is fabricated from 0.2+- 0.02 cm thick HR sheet powder coated and fitted with an injection molded black polypreplyne hub cap and 5 nos twin wheel castors. The pedestal is 60.0 +-0.5cm pitch-centre dia (70.0+-1.0cm with castors). Twin Wheel Castors- The twin wheel castors are injection moulded in black nylon. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 4

1 Lab Working Table: Lab Table of size (4420L x 1540D x 750H) with Electric facility and Water Sink.(Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 3

2 Stool Mch Ht Adj + Back: seat assembly: the seat should be made up of 1.2±0.1cm thick flat plywood and with moulded polyurethane foam and should be .upholstered with replaceable synthetic leather covers. seat size: diameter 40.0 cm adjustments: 360° revolving type back. assembly: the back foam should be designed with contoured lumbar support for extra comfort. the upholstery should be available in synthetic leather. *back size: 45.0 cm (w) covered with polyurethane foam. high resilience (hr) polyurethane foam:the_hr.polyurethane foam should be _moulded with density = 45 +1-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression height adjustment: the manual height adjustment should be very easy to operate with a help of a knob.. it can be easily locked at the most comfortable position. pedestal assembly: the five-prong pedestal should be fabricated from 0.2 ± 0.02 cm thick hr sheet( should be : dd 10791 hr ), powder coated ( oft 40-60 microns )and fitted with an injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. the pedestal should be 55.0±0.5cm pitch-circle diameter (65.0±1.0cm with castors). twin wheel castors: the twin wheel castors should be injection moulded in black nylon. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 5

1 Table of size (1200 x 600 x 728): Top made up of 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Modesty Panel-18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Rectangular Frame-Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester),Leg-Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester), Storage-Pedestal- Drawer Configuration/Product size/Styling-Box-Box-File : 3555.5(w) x 559(d) x 670(h), Construction & Material- Welded Assembled , Shell -0.6mm Thk CRCA as per IS-513. Drawer Tray & back-0.5mm Thk. CRCA as per IS-513. Drawer Front-0.6mm Thk CRCA as per IS-513. Locking- Cam Lock. Leveler- Plastic M8 leveler mounted below Body Shell. Handle- Injection moulded Polypropylene. Finish- Epoxy Palyester Powder Coated to the thickness of 50 microns (+-10). (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 1

2 Midback Chair: SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area. The chair seat & back size are: FULL BACK SIZE 51.5 cm. (W) x 69.0 cm. (H), SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D), HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The adjustable armrest is designed with the following features: Up-Down adjustment– 6 steps (7.2 ± 0.5cm range), Armrest top is mounted on Armrest structure made of glass filled Nylon, Armrest Top is PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: 360° revolving type, 3 position locking with anti shock mechanism, Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm. PEDESTAL ASSEMBLY : The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. WIDTH (W): 76.1 CM, DEPTH (D): 76.1 CM, HEIGHT (H): 101.5-111.5 CM, SEAT HEIGHT (SH): 46.0-56.0 CM. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 1

3 Computer Table with Chair: size 1200 (W) x 600 (D) x 750 (H) made of 18mm thick Pre-Laminated Board with PVC edge banding. Panel of 18mm thick Pre-Laminated Board with Single extrusion slide for Key Board fitted with 4 Nos. Caster. Midback Chair: Seat/Back Assembly- The seat and Back are made up of 1.2+-0.1 CM thick hot pressed plywood messeard as per QA method described in QCP -QLTA-P14-18 and upholstred with fabric and moulded Polyurethene foam together with seat and back covers. The back foam is designed with contured lumber support for extra comfort. Back Size - 45.0 cm(W) x 53.0 cm (H). Seat Size- 52.0 cm(W) x 48.0 cm (D). High Resilience (HR) Polyurethene Foam-- The HR polyurethene foam is moulded with density +45+-2kg/m3 and hardness load 16+-2 kgf as per IS:7888 for 25% compression. Seat /Back Covers: The seat and Back Covers are injectoion moulded in black Co-polymer polyprplyne. Armrest Assembly- The one piece armrest are made of black integral skin polyurethene reinforced with M.S insert with 50-70 shore 'A' hardness. The armrest are scrtch nd weather resistant. The armrest are fitted to the seat with armrest brackets made of 0.5+-0.05 cm thick HR steel. Pedestal Asembly- The pedestal Assembly is fabricated from 0.2+- 0.02 cm thick HR sheet powder coated and fitted with an injection molded black polypreplyne hub cap and 5 nos twin wheel castors. The pedestal is 60.0 +-0.5cm pitch-centre dia (70.0+-1.0cm with castors). Twin Wheel Castors- The twin wheel castors are injection moulded in black nylon. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 1

Confidential Room

1 Table of size (1200 x 600 x 728) : Top made up of 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Modesty Panel-18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Rectangular Frame-Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester),Leg-Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester), Storage-Pedestal- Drawer Configuration/Product size/Styling-Box-Box-File : 3555.5(w) x 559(d) x 670(h), Construction & Material- Welded Assembled , Shell -0.6mm Thk CRCA as per IS-513. Drawer Tray & back-0.5mm Thk. CRCA as per IS-513. Drawer Front-0.6mm Thk CRCA as per IS-513. Locking- Cam Lock. Leveler- Plastic M8 leveler mounted below Body Shell. Handle- Injection moulded Polypropylene. Finish- Epoxy Palyester Powder Coated to the thickness of 50 microns (+-10). (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate IGBC Platinum, Indoor Advantage Gold Certified) 1

2 Midback Chair: SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area. The chair seat & back size are: FULL BACK SIZE 51.5 cm. (W) x 69.0 cm. (H), SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D), HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The adjustable armrest is designed with the following features: Up-Down adjustment– 6 steps (7.2 ± 0.5cm range), Armrest top is mounted on Armrest structure made of glass filled Nylon, Armrest Top is PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: 360° revolving type, 3 position locking with anti shock mechanism, Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm. PEDESTAL ASSEMBLY : The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. WIDTH (W): 76.1 CM, DEPTH (D): 76.1 CM, HEIGHT (H): 101.5-111.5 CM, SEAT HEIGHT (SH): 46.0-56.0 CM. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 2

3 Linear Recta Workstation for 4 Person of size (1200 x 600) with Pedestal, KBPT & CPU Trolley & 4 Nos. of Chairs: Providing and placing spine and fin based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium trims. FIN: out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with laminate at intermediate level. Top block finished in fabric finish. Bottom block is finished in metal finish. Tiles on main spine: Combination of top tiles are fabric tile. Bottom tiles - Plain metal. SPLIT Tiles on main spine: Combination of two finishes for the top tiles on the user side shall be split fabric tackable along with split white board. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in DL + DL finsh. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1200 mm w x 750 mm d. Pedestals with legs - Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors . KBPT with mousetray - metal. Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring. The Product shall be as per specification mentioned above & as per direction of Engineer-in-Charge. (Conforming to Godrej or Equivalent Manufacture as per approved make list. Midback Chair: Seat/Back Assembly- The seat and Back are made up of 1.2+-0.1 CM thick hot pressed plywood messeard as per QA method described in QCP -QLTA-P14-18 and upholstred with fabric and moulded Polyurethene foam together with seat and back covers. The back foam is designed with contured lumber support for extra comfort. Back Size - 45.0 cm(W) x 53.0 cm (H). Seat Size- 52.0 cm(W) x 48.0 cm (D). High Resilience (HR) Polyurethene Foam-- The HR polyurethene foam is moulded with density +45+-2kg/m3 and hardness load 16+-2 kgf as per IS:7888 for 25% compression. Seat /Back Covers: The seat and Back Covers are injectoion moulded in black Co-polymer polyprplyne. Armrest Assembly- The one piece armrest are made of black integral skin polyurethene reinforced with M.S insert with 50-70 shore 'A' hardness. The armrest are scrtch nd weather resistant. The armrest are fitted to the seat with armrest brackets made of 0.5+-0.05 cm thick HR steel. Pedestal Asembly- The pedestal Assembly is fabricated from 0.2+- 0.02 cm thick HR sheet powder coated and fitted with an injection molded black polypreplyne hub cap and 5 nos twin wheel castors. The pedestal is 60.0 +-0.5cm pitch-centre dia (70.0+-1.0cm with castors). Twin Wheel Castors- The twin wheel castors are injection moulded in black nylon. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate IGBC Platinum, Indoor Advantage Gold Certified) 1

1 Table of size (1500 x 750 x 728): Size shall be 1500 Width mm x 750 Depth mm x 728 Height mm . Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) . (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate IGBC Platinum, Indoor Advantage Gold Certified) 1

2 Midback Chair: SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area. The chair seat & back size are: FULL BACK SIZE 51.5 cm. (W) x 69.0 cm. (H), SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D), HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The adjustable armrest is designed with the following features: Up-Down adjustment– 6 steps (7.2 ± 0.5cm range), Armrest top is mounted on Armrest structure made of glass filled Nylon, Armrest Top is PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: 360° revolving type, 3 position locking with anti shock mechanism, Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm. PEDESTAL ASSEMBLY : The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. WIDTH (W): 76.1 CM, DEPTH (D): 76.1 CM, HEIGHT (H): 101.5-111.5 CM, SEAT HEIGHT (SH): 46.0-56.0 CM. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 2

3 Computer Table with Chair: size 1200 (W) x 600 (D) x 750 (H) made of 18mm thick Pre-Laminated Board with PVC edge banding. Panel of 18mm thick Pre-Laminated Board with Single extrusion slide for Key Board fitted with 4 Nos. Caster. Midback Chair: Seat/Back Assembly- The seat and Back are made up of 1.2+-0.1 CM thick hot pressed plywood messeard as per QA method described in QCP -QLTA-P14-18 and upholstred with fabric and moulded Polyurethene foam together with seat and back covers. The back foam is designed with contured lumber support for extra comfort. Back Size - 45.0 cm(W) x 53.0 cm (H). Seat Size- 52.0 cm(W) x 48.0 cm (D). High Resilience (HR) Polyurethene Foam-- The HR polyurethene foam is moulded with density +45+-2kg/m3 and hardness load 16+-2 kgf as per IS:7888 for 25% compression. Seat /Back Covers: The seat and Back Covers are injectoion moulded in black Co-polymer polyprplyne. Armrest Assembly- The one piece armrest are made of black integral skin polyurethene reinforced with M.S insert with 50-70 shore 'A' hardness. The armrest are scrtch nd weather resistant. The armrest are fitted to the seat with armrest brackets made of 0.5+-0.05 cm thick HR steel. Pedestal Asembly- The pedestal Assembly is fabricated from 0.2+- 0.02 cm thick HR sheet powder coated and fitted with an injection molded black polypreplyne hub cap and 5 nos twin wheel castors. The pedestal is 60.0 +-0.5cm pitch-centre dia (70.0+-1.0cm with castors). Twin Wheel Castors- The twin wheel castors are injection moulded in black nylon. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 1

1 Table of size (1200 x 600 x 728) : Top made up of 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Modesty Panel-18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Rectangular Frame-Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester),Leg-Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester), Storage-Pedestal- Drawer Configuration/Product size/Styling-Box-Box-File : 3555.5(w) x 559(d) x 670(h), Construction & Material- Welded Assembled , Shell -0.6mm Thk CRCA as per IS-513. Drawer Tray & back-0.5mm Thk. CRCA as per IS-513. Drawer Front-0.6mm Thk CRCA as per IS-513. Locking- Cam Lock. Leveler- Plastic M8 leveler mounted below Body Shell. Handle- Injection moulded Polypropylene. Finish- Epoxy Palyester Powder Coated to the thickness of 50 microns (+-10). (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 2

2 Midback Chair: SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area. The chair seat & back size are: FULL BACK SIZE 51.5 cm. (W) x 69.0 cm. (H), SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D), HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The adjustable armrest is designed with the following features: Up-Down adjustment– 6 steps (7.2 ± 0.5cm range), Armrest top is mounted on Armrest structure made of glass filled Nylon, Armrest Top is PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: 360° revolving type, 3 position locking with anti shock mechanism, Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm. PEDESTAL ASSEMBLY : The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. WIDTH (W): 76.1 CM, DEPTH (D): 76.1 CM, HEIGHT (H): 101.5-111.5 CM, SEAT HEIGHT (SH): 46.0-56.0 CM. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 2

3 Computer Table with Chair: size 1200 (W) x 600 (D) x 750 (H) made of 18mm thick Pre-Laminated Board with PVC edge banding. Panel of 18mm thick Pre-Laminated Board with Single extrusion slide for Key Board fitted with 4 Nos. Caster. Midback Chair: Seat/Back Assembly- The seat and Back are made up of 1.2+-0.1 CM thick hot pressed plywood messeard as per QA method described in QCP -QLTA-P14-18 and upholstred with fabric and moulded Polyurethene foam together with seat and back covers. The back foam is designed with contured lumber support for extra comfort. Back Size - 45.0 cm(W) x 53.0 cm (H). Seat Size- 52.0 cm(W) x 48.0 cm (D). High Resilience (HR) Polyurethene Foam-- The HR polyurethene foam is moulded with density +45+-2kg/m3 and hardness load 16+-2 kgf as per IS:7888 for 25% compression. Seat /Back Covers: The seat and Back Covers are injectoion moulded in black Co-polymer polyprplyne. Armrest Assembly- The one piece armrest are made of black integral skin polyurethene reinforced with M.S insert with 50-70 shore 'A' hardness. The armrest are scrtch nd weather resistant. The armrest are fitted to the seat with armrest brackets made of 0.5+-0.05 cm thick HR steel. Pedestal Asembly- The pedestal Assembly is fabricated from 0.2+- 0.02 cm thick HR sheet powder coated and fitted with an injection molded black polypreplyne hub cap and 5 nos twin wheel castors. The pedestal is 60.0 +-0.5cm pitch-centre dia (70.0+-1.0cm with castors). Twin Wheel Castors- The twin wheel castors are injection moulded in black nylon. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 1

1 Table of size (1200 x 600 x 728): Top made up of 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Modesty Panel-18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Rectangular Frame-Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester),Leg-Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester), Storage-Pedestal- Drawer Configuration/Product size/Styling-Box-Box-File : 3555.5(w) x 559(d) x 670(h), Construction & Material- Welded Assembled , Shell -0.6mm Thk CRCA as per IS-513. Drawer Tray & back-0.5mm Thk. CRCA as per IS-513. Drawer Front-0.6mm Thk CRCA as per IS-513. Locking- Cam Lock. Leveler- Plastic M8 leveler mounted below Body Shell. Handle- Injection moulded Polypropylene. Finish- Epoxy Palyester Powder Coated to the thickness of 50 microns (+-10). (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate IGBC Platinum, Indoor Advantage Gold Certified) 1

2 Midback Chair: SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area. The chair seat & back size are: FULL BACK SIZE 51.5 cm. (W) x 69.0 cm. (H), SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D), HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The adjustable armrest is designed with the following features: Up-Down adjustment– 6 steps (7.2 ± 0.5cm range), Armrest top is mounted on Armrest structure made of glass filled Nylon, Armrest Top is PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: 360° revolving type, 3 position locking with anti shock mechanism, Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm. PEDESTAL ASSEMBLY : The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. WIDTH (W): 76.1 CM, DEPTH (D): 76.1 CM, HEIGHT (H): 101.5-111.5 CM, SEAT HEIGHT (SH): 46.0-56.0 CM. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 2

3 Computer Table with Chair: size 1200 (W) x 600 (D) x 750 (H) made of 18mm thick Pre-Laminated Board with PVC edge banding. Panel of 18mm thick Pre-Laminated Board with Single extrusion slide for Key Board fitted with 4 Nos. Caster. Midback Chair: Seat/Back Assembly- The seat and Back are made up of 1.2+-0.1 CM thick hot pressed plywood messeard as per QA method described in QCP -QLTA-P14-18 and upholstred with fabric and moulded Polyurethene foam together with seat and back covers. The back foam is designed with contured lumber support for extra comfort. Back Size - 45.0 cm(W) x 53.0 cm (H). Seat Size- 52.0 cm(W) x 48.0 cm (D). High Resilience (HR) Polyurethene Foam-- The HR polyurethene foam is moulded with density +45+-2kg/m3 and hardness load 16+-2 kgf as per IS:7888 for 25% compression. Seat /Back Covers: The seat and Back Covers are injectoion moulded in black Co-polymer polyprplyne. Armrest Assembly- The one piece armrest are made of black integral skin polyurethene reinforced with M.S insert with 50-70 shore 'A' hardness. The armrest are scrtch nd weather resistant. The armrest are fitted to the seat with armrest brackets made of 0.5+-0.05 cm thick HR steel. Pedestal Asembly- The pedestal Assembly is fabricated from 0.2+- 0.02 cm thick HR sheet powder coated and fitted with an injection molded black polypreplyne hub cap and 5 nos twin wheel castors. The pedestal is 60.0 +-0.5cm pitch-centre dia (70.0+-1.0cm with castors). Twin Wheel Castors- The twin wheel castors are injection moulded in black nylon. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 1

4 Almirah: Almirah of size 1981 x 916 x 486 MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 9

5 Rack of size (6'x36"x18"): with six shelves made of slotted angle Prime quality CRC sheet conforming to IS 513D/10748/5986. The pitches of the slots at 19.05mm, Panels/Shelves : 6 Bend bending process of 905(L) x 448(D) of load capacity 80 Kgs. UDL Max. per shelf , All fasteners of electro perk arised as per IS : 3655 -1985 Painting: All Steel components of powder coated as per IS: 101/1964. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 9

Name of work : - Furniture and furnishing at DFMU Sheohar PL, DFMU Sitamarhi PL, DFMU Bagaha PL, DFMU Motihari PL - RFSL West Champaran under Motihari Division

District Forensic Mobile Unit

S.No. Items Qty 04 Nos

1 Table of size (1500 x 750 x 728) : Size shall be 1500 Width mm x 750 Depth mm x 750 Height mm . The table top shall be made of pre- laminated particle board with 18 mm thick and 15 mm thick understructure covered with PVC lipping .There shall be locking provided for top drawers only , attractive black colour handles for all drawers plus only one colour is available beech. It shall have one drawer & HDU attachment on one side & 3 drawer unit on the other side. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 4

2 Highback Chair: SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair. The chair seat & back size are *HIGH BACK SIZE 51.5 cm. (W) x 82.0 cm. (H). ARMRESTS (THRILL PLUS CHAIR) : The adjustable armrest is designed with the following features •Up-Down adjustment– 6 steps (7.2 ± 0.5cm range) •Armrest top is mounted on Armrest structure made of glass filled Nylon. •Armrest Top is PU moulded over glass filled Nylon insert. PEDESTAL ASSEMBLY : The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 4

3 Visitor Chair with Arm: The Seat is injection moulded in glass filled Polypropylene compound which is upholstered with fabric upholstery covers and moulded Polyurethane foam. The Back is injection moulded in glass filled Polypropylene compound which is upholstered with Mesh fabric . * SEAT SIZE : 50.0cm. (W) x 48.0 cm. (D) * BACK SIZE : 53.0 cm. (W) x 39.0cm. (H). (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 16

4 3 Seater Perforated Metal Chair: 3 Seater Chair - SEAT/BACK FRAME ASSEMBLY: The Seat and back are made of 0.12+- 0.0096 cm thick CR Steel perforated sheets which are welded to a seat/back frame assembly made of 1.9+- 0.02cm x 0.16 +_ 0.0128 cm thk MS ERW tube. Connecting Strips made of 0.5 +_ 0.05cm thk HR steel are welded to the structure for assembly with the connecting beam. The assembly is powder coated (DFT 40-60 microns). LEG ASSEMBLY: It is a 2-piece fabricated to form a box section made of 0.16+_ 0.0128 cm thk. CR steel. Threaded nuts are welded to the box section for fixing adjustable glide screws. The leg assembly is powder coated (DFT 40-60 microns). ADJUSTABLE GLIDE: The adjustable glide is injection moulded in black Nylon 6 and is used for level adjustment of the beam seating on uneven floor surface. It is fitted to the leg assembly. ARMREST: It is made up of oblong tube of size 0.35 +_0.024 cm x 0.15 +_0.015 cm x 0.16+_0.015 cm Thk & 0.015 cm Thk & (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 8

5 Table of size (1200 x 600 x 750): Size shall be 1200 Width mm x 600 Depth mm x 750 Height mm . The table top shall be made of pre- laminated particle board with 18 mm thick and 15 mm thick understructure covered with PVC lipping .There shall be locking provided for top drawers only , attractive black colour handles for all drawers plus only one colour is available beech. It shall have only 1 drawer attachment . (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 4

6 Visitor Chair with Arm: The Seat is injection moulded in glass filled Polypropylene compound which is upholstered with fabric upholstery covers and moulded Polyurethane foam. The Back is injection moulded in glass filled Polypropylene compound which is upholstered with Mesh fabric. * SEAT SIZE : 50.0cm. (W) x 48.0 cm. (D) * BACK SIZE : 53.0 cm. (W) x 39.0cm. (H). (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 8

7 Almirah: of size 900Wx500Dx1970H MM made up of Multi bend construction and inter locking design and full length over lapping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom, LH & RH sides and back material thickness= 0.9mm, Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 4

8 Almirah: of size 900Wx500Dx1970H MM made up of Multi bend construction and inter locking design and full length over lapping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom, LH & RH sides and back material thickness= 0.9mm, Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 4

9 APO Iron Folding Single Bed 4

10 APO Iron Folding Single Bed 4

11 Computer Table: size 600 (W) x 450 (D) x 750 (H) made of 18mm thick Pre-Laminated Board with PVC edge banding. Panel of 18mm thick Pre-Laminated Board with Single extrusion slide for Key Board fitted with 4 Nos. Caster . (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 4

12 Midback Chair: Seat/Back Assembly- The seat and Back are made up of 1.2+-0.1 CM thick hot pressed plywood messeard as per QA method described in QCP -QLTA-P14-18 and upholstred with fabric and moulded Polyurethene foam together with seat and back covers. The back foam is designed with contured lumber support for extra comfort. Back Size - 45.0 cm(W) x 53.0 cm (H). Seat Size- 52.0 cm(W) x 48.0 cm (D). High Resilience (HR) Polyurethene Foam-- The HR polyurethene foam is moulded with density +45+-2kg/m3 and hardness load 16+-2 kgf as per IS:7888 for 25% compression. Seat /Back Covers: The seat and Back Covers are injectoion moulded in black Co-polymer polyprplyne. Armrest Assembly- The one piece armrest are made of black integral skin polyurethene reinforced with M.S insert with 50-70 shore 'A' hardness. The armrest are scrtch nd weather resistant. The armrest are fitted to the seat with armrest brackets made of 0.5+-0.05 cm thick HR steel. Pedestal Asembly- The pedestal Assembly is fabricated from 0.2+- 0.02 cm thick HR sheet powder coated and fitted with an injection molded black polypreplyne hub cap and 5 nos twin wheel castors. The pedestal is 60.0 +-0.5cm pitch-centre dia (70.0+-1.0cm with castors). Twin Wheel Castors- The twin wheel castors are injection moulded in black nylon. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 4

13 Table of size (900 X 590 X 750): 900 X 590 X 750 made of MS ERW round tube 18 mm x 25mm x 1.2mm thick with Pre Laminated top size 1199 X 590 X 750 mm thick with single side one drawers, Drawer unit made of .5mm thick MS CRCA sheet, All steel components have powder coated paint. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 8

14 Stool : SEAT ASSEMBLY: It is circular type 30.0 +/- 0.5 cm and made up of 0.1+/- 0.012 cm thk CR Steel. It is welded to the understructure and black powder coated ( DFT 40-60 microns ). UNDERSTRUCTURE ASSEMBLY: The understructure is made of MS tube 2.2 +/- 0.03 cm x 0.16+/- 0.0128 cm thk MS ERW tube. lt is welded ti the MS fabricated circular seat assembly and black powder coated ( DFT 40-60 microns ). The understructure is provided with black PP injection moulded ferrules. Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate IGBC Platinum, Indoor Advantage Gold Certified) 16

15 Lab Stool Mch Ht Adj + Back Hi Base: seat assembly: the seat should be made up of 1.2±0.1cm thick flat plywood and with moulded polyurethane foam and should be .upholstered with replaceable synthetic leather covers. seat size: diameter 40.0 cm adjustments: 360° revolving typeback. assembly: the back foam should be designed with contoured lumbar support for extra comfort. the upholstery should be available in synthetic leather. *back size: 45.0 cm (w) covered with polyurethane foam. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA, BIFMA Level 2, BIS Certificate ) 32