NIT No. :- 03/IGIMS/Engg.Cell /CW &EW/2026-27 gr 02

INDIRA GANDHI INSTITUTE OF MEDICAL SCIENCES, PATNA-14

FINANCIAL BID SHEET-02

Tender Notice Inviting E-Tender for civil work NIT No. :- 03/IGIMS/Engg.Cell /CW&EW/2026-27

Sl. No. Name of the Work :-Construction of Connecting corridor Old OT Block to New OT Block at IGIMS, Patna

1 Estimated Cost (In Rs.) :- Rs.24,96,663/-

2 Earnest Money ( in Rs) :- Rs. 50,000/-

3 Cost of B.O.Q. ( In RS) :- Rs. 5,000/-

4 E-tendering fee (Non Refundable ) ( In Rs) :- As per generated by www.eproc2.bihar.gov.in

5 Time of Completion of Work ( In Days) :- 45 DAYS

For Civil Work 0.00

Sl. No. BSR/ 2022 Schedule Item Description Unit Qty. Rate Amount (In Rs.)

1 15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 0.00

a 15.23.1 For thickness of tiles 10 mm to 25 mm sqm 18.900 30.70 580.23

2 15.3 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material withing 50 metres lead: Cum 2.000 1,411.20 2,822.40

3 15.7 Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meters lead: 0.00

a 15.7.4 In cement mortar cum 2.250 823.70 1,853.33

4 13.11.2 Cement plaster in course sand 12 mm cement plaster of mix:1:4(1 cement :4 coarse sand) sqm 50.000 152.90 7,645.00

5 13.12.2 15 mm cement plaster on rough side of single or half brick wall of mix.1:4(1 cement: 4 coarse sand ) sqm 50.000 176.40 8,820.00

a 4.1.3 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) cum 4.924 3,998.10 19,685.64

6 5.1 Providing and laying in position specified grade of einforced cement concrete excluding the cost of ring,shuttering,finishing and reinforcement-All work puto plinth level 0.00

a 5.1.2 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) cum 5.527 4,688.30 25,912.23

7 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. 0.00

a 5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia. kg 100.000 94.50 9,450.00

b 5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia. kg 100.000 92.60 9,260.00

8 5.9 Centring and shuttering including strutting,propping etc. and removal of form for. 0.00

a 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. sqm 24.000 211.60 5,078.40

9 6.18A Half brick masonry with bricks of class designation 100A in foundations and plinth in : 0.00

a 6.18.4A Cement mortar 1:4 (1 cement: 4 coarse send) Sqm. 31.200 599.30 18,698.16

10 11.41.2 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc.complete.Size of Tile 600x600 mm. sqm 63.850 1,638.80 104,637.38

11 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sqm 23.000 795.00 18,285.00

12 9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) 0.00

13 9.21 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 0.00

a 9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 11.520 1,775.30 20,451.46

14 9.127 Providing & Fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt / suede finish with high density protectivesurface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 0.00

15 10.16.1 Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coar of approved steel primer, welded and bolted including special shaped washers etc. complete:Hot finished welded type tubes kg 4,244.313 123.90 525,870.42

16 9.48.1 Providing and fixing M.S. grills of requirement pattern in frames of windows etc. with M.S. flats, square or round bars etc. All complete. kg 2,494.100 144.50 360,397.45

17 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work sqm 200.000 84.50 16,900.00

18 9.147D.1 Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. 0.00

a 9.147D.1 Two track two panels sliding window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) sqm 14.400 7,074.90 101,878.56

19 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 0.00

a 21.3.2 With float glass panes of 5.50 mm thickness(weight notless than 12.50 kg/sqm sqm 11.880 1,115.10 13,247.39

20 12.54x Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join,C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring 0.00

a 12.54x1 Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of GI sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. sqm Sqm. 65.100 1,626.30 105,872.13

21 12.5 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. sqm 67.450 625.10 42,163.00

22 12.51 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15- 18 microns using self drilling/ self tapping screws complete 0.00

23 13.80.A.1 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete Sqm. 350.000 81.10 28,385.00

24 13.77.2 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade .New work (two or more coats ) over and including priming coat with cement primer sqm 350.000 102.30 35,805.00

25 13.46 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 0.00

a 13.46A.1 New work (Two or more coat applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior sqm 350.000 132.50 46,375.00

26 22.5. Providing and laying in sssitu five course water proofing treatment with glass fibre tissue reinforced bitumen over roof consisting of first coat of bitumen primer @ 0.40 kg. per sqm, 2nd & 4th courses of bonding material® 1.60 kg. per sqm which shall consist of blown type bitumen of grade 85/25 conforming to IS: 702, third layer of glass ffibre tissuue course as specified, fifth, the top most layer of stone grit 6 mm and down size or pea-sized gravel sprad @ 6 dmJ per sqm including preparation of surface excluding grading for slope etc. complete. Sqm 832.000 409.70 340,870.40

28 11.30 Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete. 0.00

a 11.3.1 40 mm thick with 20 mm nominal size stone aggregate sqm. 832.000 289.10 240,531.20

29 Carrage of the following material 0.00

b Stone Aggregate , Cum 9.350 2,464.45 23,042.61

d Difference of Cost of Bricks %o 1.420 1,420.51 2,017.12

e Difference of Cost of Cement tonn 12.996 234.62 3,049.12

Total Amount Rs:- 2,195,761.99

Add Extra GST 5.36% :- 117,692.84

(A) Total Amount Rs:- 2,313,454.83

CIVIL NON SHEDULE ITEM Rate Quotted By Bidder

30 NSI Providing and fixing UV Polycarbonate sheet 10.00 mm thick of approved brand. partition / panelling Etc. All complete as per archiectural drawings and directions of engineer-incharge . Sqm. 98.240 0.00

(B) Total Amount Rs:- 0.00

(A+B) Total Amount Rs:- :- 2,313,454.83

Following Details to be Filled by the Bidder

Name of the Bidder

Address of the Bidder

For Civil Work= I/we offer in Figures……. in words………………… % (Percentage) High / Less/Estimated rate are mentioned in the Bill of quantity.) Note:- Percentage( %) rate applicable for only on Schedule Items IN FIG.

HIGH, Low, As per estimate rate

A (A)Instructions to Bidders for Filling Financial Bid

a The bidder shall quote the rates in the Price / Financial Bid in typed form only. The quoted rate / percentage shall be clearly mentioned both in figures and in words in the space provided in the BOQ.

b Any bid in which the rates are written by hand shall be summarily rejected and will not be considered for evaluation.

c The contractor shall quote percentage above / below / at par with the estimated rate for schedule items and item-wise rates for Non-Schedule Items (NSI) as provided in the BOQ.

d The quoted rates shall be inclusive of all taxes, duties, labour charges, transportation, loading, unloading, wastage, contractor’s profit and all incidental charges, unless otherwise specified.

e Overwriting, cutting or correction in the quoted rates will not be accepted. If any correction is found in the financial bid, the bid may be rejected.

f In case of any discrepancy between the rate quoted in figures and in words, the rate quoted in words shall prevail.

g The bidder shall carefully examine the site conditions, specifications and BOQ items before quoting the rates, and no claim for additional payment shall be entertained later.

h The rates quoted by the contractor shall remain valid till completion of the work and no escalation shall be payable unless specifically provided in the contract.

Note:- Non Schedule items Rate qutted by bidder .

Director, IGIMS, Sheikhpura, Patna - 14

INDIRA GANDHI INSTITUTE OF MEDICAL SCIENCES, PATNA-14

FINANCIAL BID SHEET-04 ( Corrected)

Tender Notice Inviting E-Tender for civil work NIT No. :- 03/IGIMS/Engg.Cell /CW& EW/2026-27

Sl. No. Name of the Work :-Modernization work of Nephrology Departement 1st. Floor of Polyclinic Building (North wing ) at IGIMS, Patna -14

1 Estimated Cost (In Rs.) :- Rs.91,99,179/-

2 Earnest Money ( in Rs) :- Rs. 1,84,000/-

3 Cost of B.O.Q. ( In RS) :- Rs. 10,000/-

4 E-tendering fee (Non Refundable ) ( In Rs) :- As per generated by www.eproc2.bihar.gov.in

5 Time of Completion of Work ( In Days) :- 120 DAYS

Sl. No. BSR/2022 ( Civil) BSR-23 ( Elect.) Item Description Unit Qty. Rate Amount (In Rs.)

For Civil Work 0.00

PAINTING AND FINISHING WORK 0.00

1 15.57 Dismantling alumiuium/Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of nserviceable surplus material and stacking of serviceable material with in 50 m lead as directed by Engineer-in-charge sqm. 72.000 23.70 1,706.40

2 15.52 Dismantling of flushing cistern of any size including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. Each 7.000 396.10 2,772.70

3 15.12 Dismantling doors windows and clerestory windows (steel or wood) shutters including chowkhats, architrage, holdfasts etc. complete and stacking within 50 m lead., 0.00

a 15.12.1 of area 3 Sq.m. and below Each 50.000 151.80 7,590.00

4 15.3 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material withing 50 metres lead: Cum 5.000 1,411.20 7,056.00

5 15.7 Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meters lead 0.00

a 15.7.4 In cement mortar Cum 2.000 823.70 1,647.40

6 15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 0.00

a 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 768.000 30.70 23,577.60

7 14.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 Sqm and under including cutting the patch in proper ing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead. 0.00

a 14.1.2 With cement mortar 1:4 Sqm 100.000 237.20 23,720.00

8 13.80. Removing dry or oil bound distemper by scrapping, sand paper and preparing the surface smooth including necessary repair scratches tec. Complete Sqm 2,103.474 9.70 20,403.70

9 13.77.3 Distempering with oil bound washa ble Distemper of approved brand and manufacture to give an even shade .Old work (one or more coats) sqm 2,103.474 33.20 69,835.33

10 13.78.2 Applying one coat of distemper primer of approved brand and manufacture on wall surface:Distemper primer Sqm. 2,103.474 38.70 81,404.44

11 13.80.A.1 Providing and applying white cement based putty of erage thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete Sqm. 250.000 81.10 20,275.00

12 13.93.2 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:One or more coats on old work Sqm. 208.800 54.30 11,337.84

13 12.52x Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 0.00

a 12.52x1 GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. sqm 527.469 1,348.40 711,239.20

14 9.147D.1 Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. 0.00

a 9.147D.1 Two track two panels sliding window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) sqm 72.000 7,074.90 509,392.80

15 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 0.00

a 21.3.2 With float glass panes of 5.50 mm thickness(weight notless than 12.50 kg/sqm sqm 57.600 1,115.10 64,229.76

16 21.8 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 0.00

a 21.8.1 Upto 5mm depth and 5 mm width mtr. 70.366 85.20 5,995.18

17 17.7 Providing and fixing wash basing with C.I. brackets 15mm C.P. brass pillar taps 32mm C.P. brass waste of standard pattern, including painting of fitting and brackets, cutting and making good the walls wherever reqire. 0.00

a 17.7.1 White vitreous china wash basing size 630X450 mm with a pair of 15 mm C.P. brass pillar taps. Each 10.000 2,764.40 27,644.00

18 17.9 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required 0.00

a 17.9.1 White glazed fire clay kitchen sink of size 600x450x250 mm each 1.000 2,778.00 2,778.00

19 18.9 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fitting this includes jointing of pipes & fitting whith one step CPVC solvent cement, trenching, refilling & testing of joints complete as direction of engineer in charge. (External work) 0.00

a 18.9.3 25 mm nominal outer dia pipes metre 105.000 294.70 30,943.50

b 18.9.2 20 mm nominal outer dia pipes metre 90.000 205.30 18,477.00

19 12.78 Providing and fixing on wall face unplastidse -PVC (working pressure 4 kg per sqm) rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. 0.00

a 12.78.1 75 mm diameter metre 55.000 162.70 8,948.50

20 12.79 Providing and fixing on wall face unplastidse -PVC molded fitting/accessories for unplasticised PVC rain water pipes conforming to S: 4985 including jointing with seal ring conforing to IS:5382 leaving 10 mm gap for thermal expansion. 0.00

a 12.79.3 Single tee with door 0.00

21 17.28 Providing and fixing P.V.C. Waste pipe for Kitchen sink or wash basin including P.V.C. waste fitting complete. 0.00

i 17.28.1 Semi rigid pipe 0.00

22 18.58 Providing and fixing PTMT grating of approved quality and colour. 0.00

a 18.58.1.2 125mm nominal dia with 25 mm waste hole. Each 20.000 45.20 904.00

23 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. each 20.000 594.80 11,896.00

24 18.18 Providing and fixing ball valve (brass)of approved quality High or Low Pressur, with plastic floats complee. 0.00

a 18.18.3 25 mm nominal bore (3 no. of floor) Each 5.000 399.20 1,996.00

25 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass(of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete each 10.000 1,068.50 10,685.00

26 9.1.2 Providing sal wood work in frame of doors(choukhats) and fixed in position. cum 0.360 95,670.70 34,441.45

27 9.83 Supply and fixing IS : 3564 bright finished brass hydraulic door closer (best make of approved quality) with necessary accessories and screw etc. Complete. Each 20.000 979.50 19,590.00

28 9.82 Supply and fixing bright finished brass hangging type floor door stopper with necessry screws etc complete Each 20.000 108.10 2,162.00

29 9.96.2 Providing and fixing alluminium sliding door bolt anodised(anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade with nuts and screws etc. complete: 250x 16 mm Each 20.000 210.10 4,202.00

30 9.97 Providing and fixing alluminium sliding tower bolt anodised(anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade with nuts and screws etc. complete: 0.00

31 9.100. Providing and fixing alluminium handles anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade with necessary screws etc. complete100mm Each 20.000 50.30 1,006.00

32 18.74 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 0.00

a 18.74.2 15 mm nominal bore with 45 cm length Each 20.000 108.00 2,160.00

33 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms each 20.000 96.80 1,936.00

34 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 0.00

a 17.73.1 450 mm long towel rail with total length of 495 mm,78 mm wide and effective height of 88 mm, weighing not less than 170 gms Each 20.000 397.30 7,946.00

35 9.21 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 0.00

a 9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 17.280 1,775.30 30,677.18

36 17.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 0.00

a 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each 5.000 4,230.00 21,150.00

37 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sqm 109.788 795.00 87,281.46

38 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete. sqm 53.640 686.80 36,839.95

39 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : Each 10.000 434.20 4,342.00

40 11.41.2 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc.complete.Size of 0.00

41 11.42 Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles sqm. 651.750 -480.60 -313,231.05

42 11.43 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3 mm thickness. sqm. 651.750 446.80 291,201.90

43 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms,vanity counters, window sills, facias and similar locations, ofrequired size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 0.00

a 8.2.1 Rajnagar plain white marble /Udaipur green marble/Zebra block marble 0.00

i 8.2.2.1 Area of slab upto 0.50 sqm sqm 3.000 4,242.90 12,728.70

44 9.133.2.1 Non-asbestos multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (high pressure steam cured) as per IS :14862 with suitable fibre cement screw 8 mm thick. ( everest Havy duty or its equavalant.) sqm 281.000 853.10 239,721.10

45 9.133.3.1 Gypsum board conforming to IS: 2095 Part - I 12.5 mm thick sqm 118.800 796.40 94,612.32

46 10.16 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 0.00

a 10.16.1 Hot finished welded type tubes kg 200.000 123.90 24,780.00

47 9.81 Providing and fixing bright finished brass handles with screws etc. complete: 0.00

48 9.61. Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete 0.00

a 9.61.2 Overall width 50 mm Rmt. 100.000 177.50 17,750.00

49 9.63 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete: 0.00

50 9.79 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 0.00

51 9.114 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. Complete 0.00

a 9.114.2 Double strip (horizontal type) each 50.000 34.10 1,705.00

52 9.116 Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) each 50.000 17.70 885.00

53 9.115 Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer-in-charge. each 50.000 355.00 17,750.00

54 9.80. Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with each 50.000 56.70 2,835.00

55 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 0.00

a 21.3.3 With float glass panes of 8 mm thickness sqm 24.000 1,285.60 30,854.40

56 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, sqm 18.000 283.30 5,099.40

57 4.1 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 0.00

a 4.1.3 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20,mm nominal size) Cum 3.000 3,998.10 11,994.30

58 5.1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of ng,shuttering,finishing and reinforcement-All work puto plinth level 0.00

a 5.1.2 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) cum 3.000 4,688.30 14,064.90

59 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all omplete. 0.000 0.00

a 5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm kg 50.000 94.50 4,725.00

b 5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm kg 50.000 92.50 4,625.00

60 5.9 Centring and shuttering including strutting,propping etc. and removal of form for. 0.000 0.00

a 5.9.5 Lintels, beams, plinth bams, griders, bressumers and contilevers. sqm 10.000 404.70 4,047.00

61 6.18.3A Half brick masonry with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:3 (1 cement: 3 coarse sand) sqm 20.000 621.50 12,430.00

62 6.19A Extra for half Brick masonry in superstructure above pinth level upto floor V level. sqm 20.000 89.70 1,794.00

63 6.1.12/1 Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1 .:4 (1 cement: 4 coarse sand ). Cum 2.500 5,017.90 12,544.75

64 6.3A Extra for Brick work in superstructure above plinth level upto floor V Cum 2.500 842.20 2,105.50

65 13.12.2 15 mm cement plaster on rough side of single or half brick wall of mix1:4(1 cement: 4 coarse sand ) Sqm. 50.000 176.40 8,820.00

66 13.11.2 Cement plaster in course sand 12 mm cement plaster of mix:1:4(1 cement :4 coarse sand) Sqm. 50.000 152.90 7,645.00

67 26.86 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm, modulus of elasticity 900 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for Separately 0.00

a Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 0.00

68 26.87 Providing and fixing factory made single extruded WPC {Wood Polymer Composite} solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibers {wood powder/ rice husk/wheat husk) and non toxic additives {maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800N {Face) & 900N (Edge), minimum compressive strength 50 N/mm, modulus of elasticity 850 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In• Charge. {Note:stainless steel butt hinges and necessary S.S screws shall be paid separately) 0.00

69 26.90 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain white color board for backing of cup boards and bathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm, modulus of elasticity 850 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-In- Charge. (Note: stainless steel screws shall be paid separately) 0.00

70 9.13 Providing & Fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt / suede finish with high density protectivesurface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 0.00

71 Extra cost for carriage of Material 0.00

a Sone Sand (45 km from Koelwar) Cum 3.500 1,132.90 3,965.15

b Stone Aggregate Cum 2.500 2,464.45 6,161.13

d Difference of Cost of Bricks %o 0.988 1,420.51 1,403.46

e Difference of Cost of Cement tonn 2.500 234.62 586.55

f Extra cost for carriage of Extra Earth (1 km ) Cum 9.451 208.17 1,967.41

Civil Work Schedule Item Sub-Total Amount 4,261,287.43

Add Extra GST 5.36% :- 228,405.01

Civil Work Schedule Item Total Amount ( A) 4,489,692.44

CIVIL NON SHEDULE ITEM Unit Qty. Rate Amount (In Rs.)

72 NSI Providing & Fixing of Roller Blinds ( Blackout type) in required sizes with the following specification ROLLER T:UBE of High Strength extruded Aluminium alloy anodized 38mm OD with a minimum wall thickness of 1.0mm duly. IDLER shall be of high strength fiberglass reinforced polyster, consisting of an outside sleeve and centre shaft. Sleeve shall provide bearing surface of roller tube and ratate freely on centre shaft, providing smooth quiet and long wearing operation. Fixing BRACKETS & CLAMPS: racket is made of mild steel and zinc plated, Clamp shall be of spring steel of thickness 0.7mm and zinc plated. BOTTOM RAIL: Extruded aluminium section in a colour matching to the fabric. The fabric shall be enclosed in the suitably created pocket along with the tube. The tube shall be closed from sides with end caps to give a neat look. The BALLCHAIN shall be 2mm diameter cord with 4.5mm diameter acetal balls moulded co-axially to it on 6mm pitch to form an endless ballchain. The Fabric will be 100% polyster/cotton with the thickness of 0.6mm BO type fabric weight 170gsm(min) Degree of opacity 100% Tearing Strength / colour fastner to light -12kgf/5-6 grade, width 200cm or a per equal divisions of total width of opening Make: VISTA, MARVEL,MAC,HUNTER DOUGLAS and it's Equivalent Blackout Series as Approved by Engineer-in- Charge Sqft. 968.00 0.00

73 NSI Providing and fixing 6mm thick Centutuary/Green ply of approved brand. For cup-board , ward robe , partition / panelling Etc. All complete as per archiectural drawings and directions of engineer-incharge . sqm 62.00 0.00

74 NSI Providing and fixing 12mm thick Centutuary/Green ply of approved brand. For cup-board , ward robe , partition / panelling Etc. All complete as per archiectural drawings and directions of engineer-incharge . sqm 143.74 0.00

75 NSI Providing and fixing 19 mm thick Centutuary/Green ply of approved brand. For cup-board , ward robe , partition / panelling Etc. All complete as per archiectural drawings and directions of engineer-incharge sqm 110.00 0.00

Civil Work Non-Schedule Item Total Amount (B) 0.00

For Electrical renovation & VRV Air conditioning work

Sl.No. BSR-2023 Item Unit Qty. Rate Total

1 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.l. box etc as required

2 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

a) 1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Meter 410.000 201.00 82410.00

b) 1.7.2 2X2.5 sq. mm + 1X 2.5 sq. mm earth wire Meter 375.000 246.00 92250.00

c) 1.7.3 2X 4 sq. mm + 1 X 4 sq. mm earth wire Meter 454.000 309.00 140286.00

d) 1.7.13 4 X 16 sq. mm + 1 X 6 sq. mm earth wire Meter 110.000 1312.00 144320.00

3 1.15 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ reeessed PVC conduit as required.

4 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required

5 1.24 Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate.etc. as required

c) 1.24.4 3 pin , 5/6 amps socket outlet Each 48.000 112.00 5376.00

d) 1.24.5 6 pin, 15/16 amps socket outlet Each 140.000 183.00 25620.00

6 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/,switch box including connections but excluding modular plate etc. as required Each 8.000 358.00 2864.00

7 1.27 Supplying and fixing following size/ modules, Gl box along with modular base and cover plate for modular switches in recess etc as required

8 1.32 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required Each 25.000 531.00 13275.00

9 1.33 Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required Each 20.000 64.00 1280.00

10 1.37 Supplying and fixing Ding-Dong call bell suitable for single phase, 230 volts complete as required Each 10.000 240.00 2400.00

11 1.53 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required. Each 6.000 683.00 4098.00

12 1.59 Wiring for group controlled (looped) light point/ fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit etc as required.

13 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required

14 2.5 Providing and fixing following capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty, complete with all accessories including connections, earthing the body etc. as required.

15 2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required, (But without MCB/RCCB/lsolator)

a) 2.9.3 8 way ( 4 + 24 ), Double door, horizontal type Each 5.000 6199.00 30995.00

16 2.12 Supptying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required'

a) 2.12.1 6 A to 32 A, Single pole Each 120.000 237.00 28440.00

17 2.32 Supplying and fixing Cable end box (Loose wire box, lP43) suitable for following pole and neutral, sheet steel, MCB distribution board, 2401415 V, on surface /recess complete with testing and commissioning etc. as required

a) 2.32.6 For 8 way, Doubte door TPN MCBDB Each 5.000 1342.00 6710.00

18 3.4 Earthin with G.l. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. Set 2.000 6884.00 13768.00

19 3.15 Providing and fixing 25 mm X 5 mm G.l. strip on surface or in recess for connections etc. as required. Meter 20.000 195.00 3900.00

20 5.3 Supplying and fixing 4'X20 watt LED batten with minimum efficacy 100 lm/w in aluminium housing and complete with integrated electronic driver etc directly on walll ceiling including connections with 1.5 sq.mm FRLS pVC insulated copper conductor etc. as required. (For Non-residential building) Each 10.000 762.00 7620.00

21 5.9 Supplying and fixing recess mounted 36 watt LED flat panel (2' X 2') with minimum efficacy 100 lm/w which privides soft light and glare free symmetrical illumination suitable for armstrong/grid ceiling and integrated electronic driver etc directly on false ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. Each 206.000 2663.00 548578.00

22 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required

23 8.12 Supply and fixing fabricated Feeder pillar of cubical construction, floor mounted type, fabricated out of 14 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator, with 40mm X 40mm X 5mm angle iron stand and complete in all respect etc and must be CPRI approved panel manufactures. (But without RYB LED lamp, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears, PCC work etc.) sq.ft 6.000 2261.00 13566.00

24 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 270 cum/min including wiring the down rods of standard length (upto 30cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required Each 8.000 2482.00 19856.00

25 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required

26 DSR-2025 4.1 Supplying and installaton following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers MS/GI Suspenders i/c base of suitable size MS/GI angle, bolts & nuts, painting suspenders, fastener etc as required

a) 4.1.2 150 mm width X 50 mm depth X 1.6 mm thickness Meter 30.000 686.00 20580.00

27 DSR-2025 10.8 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required

a) 10.8.2 Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) Meter 30.000 109.00 3270.00

28 DSR-2025 11.1 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required

29 DSR-2025 31.1 Supplying, Installation, Testing & Commissioning of Modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling/heating having 100% hermetically sealed inverter type twin Rotary/Scroll Compressor(s), minimum two compressors (with individual separate PCB) for above 14HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R-410-A Refrigerant or equivalent, vibration Isolators with suitable foundation etc. complete as required. To have better efficiency condenser fan shall be capable to operate at different speed with respect to load. The unit shall deliver the rated capacity and in confirmation as per IS 18728:2024 and CPWD Specifications and work even at 50°C ambient temperature without tripping. The system shall be able to deliver 100% of the rated capacity upto 39 degree C. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply and BMS compatible. The unit shall be filled with first charge of the refrigerant and ready for use as required. The condenser should be coated with a hydrophilic film to prevent water accumulation on the surface of the heat exchanger, enhance water dispersion, and reduce the risk of degradation, thereby improving overall performance and durability. The Indian Seasonal Energy Efficiency Ratio (ISEER) of the unit shall be as per Energy Conservation and Sustainable Building Code (ECSBC) 2024 as below and complete as per CPWD specification, connections, inter connections etc. as required. (For capacity <40 kWr ISEER 5.4, Capacity > 40 and <70 ISEER 5.5, Capacity > 70 ISEER 5.6 for ECSBC Building) outdoors for Cooling or Heating or Both

30 DSR-2025 31.4 Supplying, Installation, Testing and Commissioning of following minimum capacity 4 way Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration Isolation, Corded remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The Indoor units must shut down upon receiving a singal from the BMS System/Fire Singnals. The system shall be capable to adjust air flow as per room requirement in auto mode. The cooling capacity of indoor unit will be at air inlet conditions of 27 0C DB and 19 0C WB temperature. (Make will be same as of Outdoor)

31 31.13 Supplying, Installation, Testing and Commissioning of Y/T/Multi Joints. Joints shall be of same Original Equipment Manufacturer (OEM) make as of ODUs and IDUs

a) 31.13.1 Indoor Units Each 42.000 4535.00 190470.00

b) 31.13.2 Outdoor Multi Joint Each 4.000 8098.00 32392.00

32 31.14 Supplying, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as per specifications etc. as required

a) 31.14.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Meter 73.000 256.00 18688.00

b) 31.14.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Meter 74.000 346.00 25604.00

c) 31.14.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Meter 93.000 487.00 45291.00

d) 31.14.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Meter 88.000 615.00 54120.00

e) 31.14.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Meter 35.000 739.00 25865.00

f) 31.14.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Meter 26.000 904.00 23504.00

g) 31.14.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Meter 47.000 1157.00 54379.00

h) 31.14.12 41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm Meter 35.000 1368.00 47880.00

Electrical & AC Work Schedule Item Total Amount ( C ) 3,585,215.00

Electrical & AC work Non-Schedule Items Unit Qty. Rate Amount (In Rs.)

33 Previous Approved Rate Supply and installation of 450 mm, 230 V A.C. metallic body/blade wall/cabin fan including fixing the bracket, making connection, testing, commissioning etc as required Each 20.000 0.00

34 Previous Approved Rate Supply & fixing of AC indoor drain pipe of suitable size inside elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation meter 175.000 0.00

Electrical & AC work Non-Schedule Items ( D) 0.00

Grand Total amount of Civil , Electrical & AC Work ( Schedule Items & Non schedule Items) ( A+B+C+D) ₹ 8,074,907.44

Following Details to be Filled by the Bidder

Name of the Bidder

Address of the Bidder

For Civil Work= I/we offer in Figures……. in words………………… % (Percentage) High / Less/Estimated rate are mentioned in the Bill of quantity.) Note:- Percentage( %) rate applicable for only on Schedule Items IN FIG.

HIGH, Low, As per estimate rate

For Electrical Work= I/we offer in Figures……. in words………………… % (Percentage) High / Less/Estimated rate are mentioned in the Bill of quantity.) Note:- Percentage( %) rate applicable for only on Schedule Items IN FIG.

HIGH, Low, As per estimate rate

A (A)Instructions to Bidders for Filling Financial Bid

a The bidder shall quote the rates in the Price / Financial Bid in typed form only. The quoted rate / percentage shall be clearly mentioned both in figures and in words in the space provided in the BOQ.

b Any bid in which the rates are written by hand shall be summarily rejected and will not be considered for evaluation.

c The contractor shall quote percentage above / below / at par with the estimated rate for schedule items and item-wise rates for Non-Schedule Items (NSI) as provided in the BOQ.

d The quoted rates shall be inclusive of all taxes, duties, labour charges, transportation, loading, unloading, wastage, contractor’s profit and all incidental charges, unless otherwise specified.

e Overwriting, cutting or correction in the quoted rates will not be accepted. If any correction is found in the financial bid, the bid may be rejected.

f In case of any discrepancy between the rate quoted in figures and in words, the rate quoted in words shall prevail.

g The bidder shall carefully examine the site conditions, specifications and BOQ items before quoting the rates, and no claim for additional payment shall be entertained later.

h The rates quoted by the contractor shall remain valid till completion of the work and no escalation shall be payable unless specifically provided in the contract.

Note:- Non Schedule items Rate qutted by bidder .

Director, IGIMS, Sheikhpura, Patna - 14