Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance R O 6 PATEL NAGAR LAST MORH JAMMU | JAMMU | JAMMU AND KASHMIR | 180001 | Admitted-Finance |
Tender Value
₹21 L
EMD Value
₹63,000
Closing Date
17 May 2022, 1:00 pmClosed
Executive Engineer JDA Division No.1
Executive Engineer JDA Division No.1, RHC, JDA
Fencing of parking lot (Yard No. 7) adjoining LIC office and Election Commission of India office at Rail Head Complex, Jammu ( 3rd Time)
2022_HAUDD_168390_1
JDA-I/2022-23/e-NIT/13 Dated 04.05.2022
Open Tender
Civil Works - Others
Item Rate
45 days
Jammu
SBD
3 documents required · 3 mandatory
₹1,500
Vice Chairman, Jammu Development Authority
₹63,000
18 May 2022
4 May 2022
17 May 2022
4 May 2022
17 May 2022
4 May 2022
Amount
Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :
Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 infoundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)
Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete.
12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)
Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm
Steel work welded in built up sections/framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates andsimilar works.
Finishing with Deluxe multi surface paint system for interiors andexteriors using primer as per manufacturers’ specifications:Painting wood work with deluxe multi surface paint ofrequired shade. Two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand andmanufacture
Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete.2 mm thick
Finishing with Deluxe multi surface paint system for interiors andexteriors using primer as per manufacturers’ specifications:Two or more coats applied @ 1.25 liter/10sqm over andincluding one coat of special primer applied @ 0.75liter /10sqm
Providing and laying bituminous macadam using crushed stone aggregatesof specified grading premixed with bituminous binder, transported to siteby tippers, laid over a previously prepared surface with paver finisherequipped with electronic sensor to the required grade, level and alignmentand rolling with smooth wheeled, vibratory and tandem rollers as perspecifications to achieve the desired compaction and density, complete asper specifications and directions of Engineer-in-Charge. 50 to 100 mm average compacted thickness with bitumen ofgrade VG-30 @ 3.5% (percentage by weight of total mix) prepared inBatch Type Hot Mix Plant of 100-120 TPH capacity.
Providing and applying 2.5mm thick road marking strips (retro-reflective)of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, drivenby experienced operator on road surface including cost of material, labour,T&P, cleaning the road surface of all dirt, seals, oil, grease and foreignmaterial etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 min width as well as10 sqm on plan including disposal of excavated earth, lead upto 50 meter and lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil :
Providing & fixing at or near ground level precast cement concrete in kerbs,, edging etc asper approved patterns and setting in position with cement mortar 1:3(1 cement:3 coarse sand) including the cost of required centring, shuttering and curing complete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Providing and laying WBM with specified stone aggregates, stone screening and binding materials including screening,sorting,spreading to template and consolidation with power road roller of 8 to 10 tonne capacity WBM Grade-II 63mm to 45 mm size including stone screening 13.2mm size
Providing and laying WBM with specified stone aggregates, stone screening and binding materials including screening,sorting,spreading to template and consolidation with power road roller of 8 to 10 tonne capacity WBM Grade-III 53mm to 22.4 mm size including stone screening 11.2mm size
Providing and laying 25mm thick semidense bitumenous concerete with specified graded stone aggreates for wearing coat including loading of aggreates with FE loader and hot mixing of bitumen with filter and stone aggregates in hot mix plant tranporting the mixed material by tipper to pavers at site of work and laying them mixed material with mechanical pavers finishers to the required level and grade rollong with power road roller to actieve the desired density and compaction including cost of priming coat/tack coat (bitumen use shall VG-30 and grading of Mix shall be as per the relevant clause of (MORTVH)density and all complete including cost of bitumen and all sorts of taxes cleaning of existing road surface by mechanical equipment (Air Campressor Machine)
Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment)
Indu Bhushan
RAJ KUMAR SALGOTRA
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .