WBPHED /EE/AMD/NIeT-12 of 2024-2025/5

Amount

Supply and Delivery of Following Materials at site:-

70 Watt. LED Highly efficient IP66 LED street-light with aluminium pressure die-cast housing, toughened glass in the front and peanut lens for batwing light distribution,higher spacing between poles and maintenance-free system.(Make-Approved Make)

4 ft. long 22 Watt LED Tubelight Slim LED batten with aluminium housing and polycarbonate diffuser is an ideal replacement solution for existing battens/fluorescent lamps with elegantly designed end caps.(Make-Approved Make)(14 Nos For Pump House)

4 Core X 10 Sqmm, 1.1 KV Grade XLPE insulated Al.Ar Cable.( From DBs to Pole)(Make:-Approved Make)

450 mm Sweep exhaust fan 220V-240 V,50 Hz, Single phase.(Make:-Approved Make)

3 CoreX 2.5 Sqmm industrial flexible copper cable wire/dia-30/0.25 PVC insulated with PVC sheathed.(Make:Approved Make)(For 6 Nos Street light from Roof of the building+5 Nos From 9 Mtr. Pole+4 Nos From 11 Mtr. Pole Towards River Bed)

4 Core X 4 Sqmm, 1.1 KV Grade XLPE insulated Al.Ar Cable.(From DBs to Street light outside of the Pump House)(Make:-Approved Make)

100 Watt High efficiency round LED high-bay luminarie with aluminium die cast housing with high lumen efficiency of>130 lm/Watt, a perfect energy-saving solution with IP65 Protection.(Make-Approved Make)

200 Watt LED Flood Light, high efficiency IP-66 with pressure die-cast aluminium housing and toughened glass infront with unique flood optics to ensure uniform distribution and savings upto 50% as compared to conventional system.(Make-Approved Make)

30 Watt LED Post-top IP65 elegently designeddie-cast aluminium housing and high grade aluminium heat sink for efficient thermal management for gate light.(Make-Approved make)

2 Core X 4 Sqmm, 1.1 KV Grade XLPE insulated Al.Ar Cable as per IS:7098(Part-I).(From SS encloser to 11 Mtr. Pole)

Supplying and fixing double door 8 Way Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(With 40 Amp TPN MCB as a incomer + 8 Nos 10 Amp MCB as a Outgoing)(Make-Havells, Model No-DHDPTODRW08)

Supply of 25 mm dia GI Conduit 1.6mm thick.(Approved make)

Supply of GI Bend/Elbow.

Supply of GI saddle etc …

Two way Circular Box & cover.

One way Circular Box & cover.

Labour for fitting and fixing 25 mm dia 1.6mm thick G.I. Conduit above ground (exposed) in the wall with previously supplied saddle clamps including cost of jointing materials,holder bat clamps etc.,as necessary, including cutting pipe, making threads etc. complete in all respect with two coats of painting with approved paint any height.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required.

3 X 22/0.3(1.5 Sqmm).(For lighting Fixtures)

3 X 36/0.3(2.5 Sqmm).(For Exhaust Fans)

3 X 56/0.3(4 Sqmm).(For industrial Plug Sockets)

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works.

12 Module.

8 Module.

6 Module.

Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required.(22 Nos For Pump House)

Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supplying & Fixing Industrial Plug & Socket board with 240 V, 20A, SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl. S&F 20 A SP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection.

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.(From DB to Pole To Pole+ DB to 11 Mtr. Pole)

Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated and sheathed wire (single core) from loop box at the base of pole to light fiting through pole & bracket (without control switch) including making connections & painting. (For 6 Nos Street Light)

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:45 cm (18").

Supply & Fixing GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall with necy. bolts & nuts (6 mm dia x 62 mm long).(4 Nos for Pump House)

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V,15 A Kit-Kat fuse unit, one NL on,porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1)after dismantling the damaged looping cable box etc. where necy. incl. painting.

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

9.0 Mtr. Long swaged and welded steel tubular pole as per IS-2713-1980 with CI Base Plate & CI Cap.(Make:-Approved Make)

Single arm bracket made of 40mm Dia 1.5 Mtr. Long.

11.0 Mtr. Long swaged and welded steel tubular pole as per IS-2713-1980 with CI Base Plate & CI Cap.(Make:-Approved Make)

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly.

Upto 9.0 mtr. Size 0.6x0.6x1.70 mts.

Above 9.0 mtr. Size 0.6x0.6x1.91 mts.

Fitting & fixing of the outdoor lighting luminaries along with new accessories to the pole, Gate and O.H.R. Wall etc as per direction of EIC.

Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling by screws etc.

Fixing only Floodlight/High Bay Fitting with suitable tie clamps and MS plate for mounting top of the Ceiling or similar structure.

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment.(2 Way)

Supplying and fixing 10 Amp, SPN, 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.(For Stabilizer & Panel to Connect with Earth Pit)

Supply & fixing GI (Hot Dip) strips 25 mm x 6 mm thick for horizontal run on the Parapet/Roof/ Wall with GI Saddles 1100 mm apart incl. mending good the damages to building works (For lightning arrestor of Pump house)

Connecting the pole to earth busbar including S & F GI (Hot Dip) wire of size as below,spiral on pole body as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.

No. 12 SWG.

Earthing with GI earth spike(1822mmX20 mm) and grouted the same under the ground level as per direction.

Add. GST@18%

Add. Cess@1%

M/s. SOMA ENTERPRISE

Ciemenics