HEW-563 D.G. Set RECALL

[23.22.8.5]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 8.5. SITC Four pole ON LOAD Manual change over switch in SS enclosure of following Ratings 400 amp 415 volts [Through Rate]

[24.1.1]EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. [Through Rate]

[24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required. [Through Rate]

[24.1.3]EARTHING AND LIGHTENING ARRESTOR 3. Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. [Through Rate]

[24.1.5]EARTHING AND LIGHTENING ARRESTOR 5. Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode. [Through Rate]

[24.13.82]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 82. 185 Sq mm 3.5 core (Arm.) [Through Rate]

[24.2.8.12]LT CABLE 8.12. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 185 sqmm [Through Rate]

[24.2.8.14]LT CABLE 8.14. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work.300 sqmm [Through Rate]

[24.5.2.4]MISCELLANEOUS ITEMS 2.4. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 90/75 mm outer dia/inner dia [Through Rate]

[24.7.5]RCC FOUNDATIONS FOR DG SET 5. 250 KVA DG Set [Through Rate]

Supply and erection of 300 Sqmm single core cable un-armored made out of aluminum conductor, 650/1100 Volt confirming to ISS 1554(Part-I) of 1988 IS: 7098/Part-1/1988 with latest amendments and complete in all respect up-to the entire satisfaction of Engineer-in-Charge of the Work. (Rate Without GST). Make – Havells/KEI/Polycab

Laying only of HDPE pipe of size 110 mm dia by using of trenchless technology 1.5 meter below ground level including scanning of underground services before laying the pipe for protection of the existing services like underground cable, gas pipe, water pipe, oil pipe, sewerage pipe or any other service (excluding the cost of HDPE pipe) complete in all respect up to the entire satisfaction of Engineer-in-Charge. (Rate without GST)

Supply and erection of hot dipped Galvanized strip of size 35mm x 5mm as earth electrode complete with G.I nuts, bolts, washers and labour charges. (Rate Without GST)

Supply, Installation, Testing and commissioning of 250 KVA Silent DG, with 1500 RPM, the standard voltage should be 415V with a plus /- 10% tolerance, and the frequency is 50 Hz with a plus /- 2% tolerance, power factor of 0.8,required to handle a 110% overload for 1 hour within a 12-hour cycle. The Generator must comply with the latest CPCB (Central Pollution Control Board) emission standards, which includes limits on NOx, CO, HC, and PM, the Generator must operate within the permissible noise level limits as per the latest Ministry of Environment, Forest and Climate Change (MOEF) notification, turbocharged, multi-cylinder, and water-cooled or coolant cooled, Generator set should have CPCB-IV plus or latest specifications coupled to 415V, 250KVAalternator both mounted on common Base frame with other standard accessories i.e. Fuel tank, Batteries with leads complete with all material and labour charges complete in all respect up to the entire satisfaction of Engineer-in-Charge. (Rate without GST) Make of Diesel Engine- Cummins/ Kirloskar Make of Alternator-Stamford/Kirloskar/Crompton Greeves Make of canopy and common base -Cummins/ Kirloskar/Sudhir.

Supply, Installation, Testing and commissioning of AMF Panel for 250 KVA DG complete with all material and labour charges complete in all respect up to the entire satisfaction of Engineer-in-Charge. (Rate without GST) Make: - Sudhir/Kirloskar.

Providing and fixing 1.8 meters high G.I. wire mesh fencing with wire mesh made out of 8 SWG/4.0 mm G.I. wire of size 50mm x 50 mm, with2.50 meter angle iron posts 50 mm x 50 mm x 6 mm placed every 1.0 meters center to center founded in M15 grade cement concrete 0.7 meter below ground level, and 2 nos. horizontal angles 1.5mtr long and vertical flats 50mm x 6 mm of length 1.8mtr, 2 nos. horizontal channel 1.5mtr long with one entry gate of 1.0 mtr wide and 2.0 mtr.High, including priming and painting complete with all material, labour, welding, machinery charges complete in all respect up to entire satisfaction of engineer in charge of work (Rate Without GST)

Supply only of HDPE pipe PE63, PN4 of size 110 mm dia for use in trenchless boring as per IS4984, ISO: 4427 and suitable for electrical cables complete in all respect up to the entire satisfaction of Engineer-in-Charge. Make: - as per list attached (Rate without GST)