Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.5 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹9.8 L+₹22,050 (2.31%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹10.2 L+₹62,790 (6.59%)Admitted-Finance | L3 | Admitted-Finance | |
| 4 | L4₹10.3 L+₹74,490 (7.82%)Admitted-Finance | L4 | Admitted-Finance | |
| 5 | L5₹11.5 L+₹1.9 L (20.3%)Admitted-Finance | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | G M ELECTRICAL AND MECHANICAL ENGINEERING WORKS L3 | M/S AH TUBE WELLS L1 | ZAKIR BOREWELLS L2 | M/S JEHLUM BOREWELLS L5 | M/S ATTAR BROTHERS L4 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Drilling/Boring of 125 mm diameter tube well by air rotary drilling rig unit suitable for lowering of MS casing of 125mm diameter in suitably drilled bore hole as per specifications laid down in IS 2800 (Part-I & II) with up to date amendments. The job is to be done in all kinds of soils, boulder, rocks, collapsible strata, saturated soils, artisan conditions by ODEX/DTH attachments and exploration of ground water by tapping sufficient aquifer zones. The job includes the cost of shifting of drilling machine, loading, unloading of accessories, tools, bits, casing shoe, consumables like fuel, lubricants, skilled and unskilled labours and other unforeseen items. Development of tube well with backwash method with air compressor of minimum capacity 1000 CFM (300 PSI air delivery system) with suitable arrangements till well is thoroughly developed in all respects as per the directions of site engineer. | 198 | Mtr | 2,450 ₹4,85,100 | 2,145 ₹4,24,710 Lowest | 2,510 ₹4,96,980 | 2,700 ₹5,34,600 | 2,375 ₹4,70,250 |
| 2.00 | Supply, Providing, Fitting, assembling in vertical position in above drilled bore of Mild Steel plain and beveled ended 125mm dia. (Class B) as per IS 4270 Casing pipes and subsequent lowering of casing assembly and its welding after every 10 feet, up to the drilled/desired depth. The whole casing pipe is inclusive of slotted pipe/ flushed, which is to be used as per the site requirement and as directed by site engineer. The pipe shall be lowered up to the desired level BGL. The average length of each pipe shall not exceed 3.00 Mts. The welding electrodes used for welding the pipe shall confirm to relevant IS codes. The specifications of the tube well shall be as per IS 2800 part I & II. | 198 | Mtr | 2,050 ₹4,05,900 | 1,925 ₹3,81,150 Lowest | 2,160 ₹4,27,680 | 2,300 ₹4,55,400 | 2,075 ₹4,10,850 |
| 3.00 | Supply, Installation, Testing and commissioning of India Mark II hand pump assembly comprising of cylinder, head, handle assembly, front cover, handle axle, washers, nuts/bolts. | 3 | Job | 10,000 ₹30,000 | 14,000 ₹42,000 | 5,000 ₹15,000 Lowest | 10,000 ₹30,000 | 12,000 ₹36,000 |
| 4.00 | Providing and Fitting of 32 mm dia. GI risers out of class B pipes of approved SI make including properly threaded at 10 feet length each No. with heavy duty sockets for joint fitting in the tube well. | 42 | Nos. | 1,600 ₹67,200 | 1,675 ₹70,350 | 500 ₹21,000 Lowest | 1,800 ₹75,600 | 1,800 ₹75,600 |
| 5.00 | Providing and Fitting of 10 Feet long GI connecting rods suitable for INDIA Mark II Hand Pump. | 42 | Nos. | 300 ₹12,600 | 400 ₹16,800 | 200 ₹8,400 Lowest | 500 ₹21,000 | 400 ₹16,800 |
| 6.00 | Providing/Laying of Cement block of 4ft x 4ft feet size and 0.3 m (1ft) deep in a mix of 1:3:6 to adequate the strength to act as sanitary block for the well and grout the hand pump assembly in order to make it robust to resist shock load observer while pumping. The block comprises mud mat of 4 inch height and then laying of 8 inch cement concrete with suitable drainage and Providing Laying of cement plaster in 1:4 mix to the above block to give aesthetically good appearance. Cost on account of shuttering, strutting, centring, curing etc. is included in the scope of work.
In case the suitable space for the above specification is not available, the surface area is to be adjusted accordingly. | 3 | Job | 5,000 ₹15,000 | 6,000 ₹18,000 | 2,000 ₹6,000 Lowest | 10,000 ₹30,000 | 6,000 ₹18,000 |
Tender Value
₹10.7 L
EMD Value
₹32,100
Closing Date
1 Dec 2025, 3:00 pmClosed
executive engineer
phe gwd
Construction of Bore Well at Doursa Wani 03 No in District Kupwara
2025_PHE_296102_2
eNit No 61 of 202526
Open Tender
Drilling Works
Item Rate
10 days
srinagar
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Yes
executive engineer
₹32,100
Yes
9 Dec 2025
24 Nov 2025
2 Dec 2025
24 Nov 2025
1 Dec 2025
24 Nov 2025
24 Nov 2025 - 1 Dec 2025
Amount
Drilling/Boring of 125 mm diameter tube well by air rotary drilling rig unit suitable for lowering of MS casing of 125mm diameter in suitably drilled bore hole as per specifications laid down in IS 2800 (Part-I & II) with up to date amendments. The job is to be done in all kinds of soils, boulder, rocks, collapsible strata, saturated soils, artisan conditions by ODEX/DTH attachments and exploration of ground water by tapping sufficient aquifer zones. The job includes the cost of shifting of drilling machine, loading, unloading of accessories, tools, bits, casing shoe, consumables like fuel, lubricants, skilled and unskilled labours and other unforeseen items. Development of tube well with backwash method with air compressor of minimum capacity 1000 CFM (300 PSI air delivery system) with suitable arrangements till well is thoroughly developed in all respects as per the directions of site engineer.
Supply, Providing, Fitting, assembling in vertical position in above drilled bore of Mild Steel plain and beveled ended 125mm dia. (Class B) as per IS 4270 Casing pipes and subsequent lowering of casing assembly and its welding after every 10 feet, up to the drilled/desired depth. The whole casing pipe is inclusive of slotted pipe/ flushed, which is to be used as per the site requirement and as directed by site engineer. The pipe shall be lowered up to the desired level BGL. The average length of each pipe shall not exceed 3.00 Mts. The welding electrodes used for welding the pipe shall confirm to relevant IS codes. The specifications of the tube well shall be as per IS 2800 part I & II.
Supply, Installation, Testing and commissioning of India Mark II hand pump assembly comprising of cylinder, head, handle assembly, front cover, handle axle, washers, nuts/bolts.
Providing and Fitting of 32 mm dia. GI risers out of class B pipes of approved SI make including properly threaded at 10 feet length each No. with heavy duty sockets for joint fitting in the tube well.
Providing and Fitting of 10 Feet long GI connecting rods suitable for INDIA Mark II Hand Pump.
Providing/Laying of Cement block of 4ft x 4ft feet size and 0.3 m (1ft) deep in a mix of 1:3:6 to adequate the strength to act as sanitary block for the well and grout the hand pump assembly in order to make it robust to resist shock load observer while pumping. The block comprises mud mat of 4 inch height and then laying of 8 inch cement concrete with suitable drainage and Providing Laying of cement plaster in 1:4 mix to the above block to give aesthetically good appearance. Cost on account of shuttering, strutting, centring, curing etc. is included in the scope of work. In case the suitable space for the above specification is not available, the surface area is to be adjusted accordingly.
ZAKIR BOREWELLS (BID ID -2656273)
G M ELECTRICAL AND MECHANICAL ENGINEERING WORKS (BID ID -2655959)
M/S ATTAR BROTHERS (BID ID -2656850)
M/S JEHLUM BOREWELLS (BID ID -2656074)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.09 MB
BOQ_958862.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .