Restoration of BT Surfaces at K.K.Colony Ward No 41 43 44 75 west zone

Advance Patch Work 13.20 mm Providing Advance Patch work using 50 mm consolidated Thickness by using 1 M3 of 13.20mm IRC Metal with 44 KG of Bitumens per 1 M3 of Metal for pre mixing for existing surface advance patch work including cost and conveyance of materials to the work iste and stacking them to teh dept metric guage for the pre measurement, heating the bitumen in bitumen boiler, heating the aggregates and mixing , them with bitumen in mini hot mix plant for premix carpet only rolling by 60-70 KN Power roller for premix carpet and seal coat seperately including labour charges for spreading the mix for premix carpet application of bitumen for seal coat over premix carpet, including labour charges for spreading seal coat separately over premix carpet etc., including higher charges and fuel charges for bitumen boiler and all other tools and plant empolyed etc., complete as per of MOR111Rev-V Specification

Preparing the existing surface to laying the road to proper Gradieat and remove the loose soils without damaged the water supply and other pipelines, The Rate inclusive all charges even as earth work and remove the same away from the work site etc., completed for specification

Removal of Excavated Excess earth away from the site to 5 KM including loading and transportation charges etc., complete as per standard specificatgion for 1 M3

Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Providing and laying Prime coat of 7 kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion (SS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as Prime coat manually etc., complete as per 502 of MORTH Rev-5 Specifications

Providing and laying Tack coat of 2.5 kgs/10 sqm over the Prime surface treated with binder using 2.5 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications

Providing and laying tack coat of 2kgs/10 sqm over the BT surface treated with binder using 2 kgs ofbituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labourcharges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Specifications

Providing and laying 50 mm compacted thick dense bituminous macadam using 0.24 cum of 26.5-13.2 mm graded metal and 0.25 cum of 13.2-2.36 mm graded metal and 0.23 cum of 2.36 mm & below metal with 53.20 kgs of 60/70 bitumen for premixing per 10 sqm including cost and conveyance of all materials to C M P site, heating the bitumen and agregates to required temperature and mixing them in required temperature in central hot mix plant 20- 30 tonnes capacity conveying the mix by tipper trucks to paver site,spreading the mix in required temperature for uniform thickness of 50mm with mechanical paver to the specified grades and cross sections and compaction by Vibratory roller to the required density etc.,including labour charges for loading bitumen in to bitumen tank and metal to feeder unit,labour for attending to paver site etc., including hire charges and fuel charges for 20- 30t C M P with bitumen boiler,tipper trucks, paver finisher, vibratory rollers and all other

Providing and laying Bituminous concrete to 30 mm thick using 0.13 cum of 19.00-9.50mm, 0.17 cum of 9.50- 2.36mm and 0.26 cum of 2.36 and below with 46.28 kgs of VG60/ VG70 bitumen,4.00 kg plastic for premixing per 10sqm including cost and conveyance of all materials to CMP site heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity , conveying the mix by tipper trucks to paver site , spreading the mix to uniform thickness of 40mm /30 mm with mechanical paver to the specified grades and cross sections and consolidated by 80- 10 tonne vibratory/ pneumatic roller to the required density etc., including labvour for attending to paver site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler , tipper trucks , paver finisher /9m paver finisher , vibratory / pneumatic roller and all other tools and plant required , including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5

Road marking with hot applied Thermoplastic compound with reflectorising glass benads on bituminous suface.Providing and laying of hot applied thermoplastic compound 2.5mm exclusive of surface applied glass beads as per IRC 35.The finished surface to be level,uniform and free form streaks and holes.