Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹13.1 LAccepted-AOC 3 140 H 1 PERIYAR STREET AMMAN NAGAR METTUR DAM 636 401 | METTUR DAM | SALEM | TAMIL NADU | 636401 | ₹13.1 L | 1 | Accepted-AOC L1 |
| 2 | 2₹13.8 LRejected-AOC 2 222 B 10 PONMAGAR METTUR DAM 636 401 | METTUR DAM | SALEM | TAMIL NADU | 636401 | ₹13.8 L | 2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | SS ENGINEERING CONTRACTOR L1 | PREETHI ENTERPRISES L2 |
|---|---|---|---|---|---|
| 1.00 | Charges for dismantling the cooling water pump motor from motor stool assembly, moving to repair bay and positioning on the spare motor stool assembly. Again lifting and moving towards the cooling water pump, positioning and reassembling the motor after completion of cooling water pump overhaul works. | 2 | Nos | 27,350 ₹54,700 Lowest | 27,900 ₹55,800 |
| 2.00 | Charges for dismantling the flexible coupling assembly lock nut, bearing plate, thrust bearing, cooling coil & water lines and bearing oil pan. Cleaning and inspection of the components, renewing the worn-out components, Corroded Bolts and Nuts and reassembling. | 2 | Nos | 23,150 ₹46,300 Lowest | 23,600 ₹47,200 |
| 3.00 | Charges for dismantling of motor stool with pump components of Thrust block, Discharge elbow, Drive shaft, Element – III & II, Intermediate shaft top half coupling, Intermediate shaft, Element – I, pump shaft half coupling, Pump casing, Bearing housing, Pump shaft with impeller, Suction bell mouth assembly, Bell mouth liner (7 mm Rubber cord to be provided wherever necessary on contractor scope) and reassembling. | 2 | Nos | 91,500 ₹1,83,000 Lowest | 93,200 ₹1,86,400 |
| 4.00 | Charges for cutting and removal of existing worn-out shaft sleeves (SS) in impeller shaft bottom / impeller shaft top / Intermediate shaft / Drive shaft stuffing box sleeve and assembling of new sleeves by gas flame heating. | 2 | Nos | 3,700 ₹7,400 Lowest | 3,800 ₹7,600 |
| 5.00 | Charges for lifting of impeller along with pump shaft, setting to the impeller stand, removing the impeller from the pump shaft by using hydraulic jack and gas flame heating over the impeller stem portion and reassembling of existing/new impeller with existing / new pump shaft and finally tightening of impeller lock nut and deflector with S.S. Allen screws and tag welding. | 2 | Nos | 19,950 ₹39,900 Lowest | 20,350 ₹40,700 |
| 6.00 | After completion of overhaul works, charges for measuring overall lift, providing correct lift and locking with lock nut. Alignment of cooling water pump with motor after tightening of motor bed bolts and finally observation and attending of minor defects noticed during trial run of cooling water pump. | 2 | Nos | 33,100 ₹66,200 Lowest | 33,800 ₹67,600 |
| 7.00 | Charges for loading the pump shafts and bushes to outside work shop for machining and bring it back to MTPS-I after machining and unloading it in Cooling water pump house. | 2 | Nos | 11,800 ₹23,600 Lowest | 12,000 ₹24,000 |
| 8.00 | Charges for painting with one coat of rust convertor , one coat of epoxy red oxide primer and one coat of epoxy high build coal tar one over the other with proper intervals for the water immersed pump components. | 224 | M2 | 29 ₹6,496 Lowest | 32 ₹7,168 |
| 9.00 | Painting charges for two coats of enamel light / smoke grey, black, green paint including cleaning the surface for discharge elbow, thrust pad, motor stool, bearing housing (black paint), lubricating oil cooling water lines (green paint) etc. | 122 | M2 | 102 ₹12,444 Lowest | 105 ₹12,810 |
| 10.00 | Charges for dismantling & renewal of corroded G.I pipe lines such as dia 25 mm & 15 mm and its fittings in cooling water pump air release and cooling line by new pipe line which includes pipe cutting to required size & laying along with fittings and valves wherever required. (25 mm G.I pipe and fittings will be provided by TNPGCL) | 50 | Mtrs | 160 ₹8,000 Lowest | 165 ₹8,250 |
Tender Value
Refer Docs
EMD Value
₹12,400
Closing Date
26 Feb 2026, 2:00 pmClosed
Superintending Engineer /Mechanical-I/MTPS-I
Office of the Superintending Engineer / Mechanical -I Mettur Thermal Power Station- I Mettur Dam-636406
MTPS I CA CWS I Complete dismantling inspection Overhaul and renewal of pump components in 2 Nos Cooling Water Pump of capacity 16000 M3 Hr Single Stage 64 inch VMF Model 1175 KW motor in stage I
2026_EB_655701_1
CE / MTPS-I / SE / M-I / CA / OT. 532 / 2025-26
Open Tender
Power/Energy Projects/Products
Works
20 days
Mettur Thermal Power Station-I / Mettur Dam
As per the Tender Specifications
4 documents required · 4 mandatory
₹0
₹12,400
Yes
30 Jul 2026
12 Feb 2026
27 Feb 2026
12 Feb 2026
26 Feb 2026
12 Feb 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Charges for dismantling the cooling water pump motor from motor stool assembly, moving to repair bay and positioning on the spare motor stool assembly. Again lifting and moving towards the cooling water pump, positioning and reassembling the motor after completion of cooling water pump overhaul works. | 2 | Nos | - | - |
| 2 | Charges for dismantling the flexible coupling assembly lock nut, bearing plate, thrust bearing, cooling coil & water lines and bearing oil pan. Cleaning and inspection of the components, renewing the worn-out components, Corroded Bolts and Nuts and reassembling. | 2 | Nos | - | - |
| 3 | Charges for dismantling of motor stool with pump components of Thrust block, Discharge elbow, Drive shaft, Element – III & II, Intermediate shaft top half coupling, Intermediate shaft, Element – I, pump shaft half coupling, Pump casing, Bearing housing, Pump shaft with impeller, Suction bell mouth assembly, Bell mouth liner (7 mm Rubber cord to be provided wherever necessary on contractor scope) and reassembling. | 2 | Nos | - | - |
| 4 | Charges for cutting and removal of existing worn-out shaft sleeves (SS) in impeller shaft bottom / impeller shaft top / Intermediate shaft / Drive shaft stuffing box sleeve and assembling of new sleeves by gas flame heating. | 2 | Nos | - | - |
| 5 | Charges for lifting of impeller along with pump shaft, setting to the impeller stand, removing the impeller from the pump shaft by using hydraulic jack and gas flame heating over the impeller stem portion and reassembling of existing/new impeller with existing / new pump shaft and finally tightening of impeller lock nut and deflector with S.S. Allen screws and tag welding. | 2 | Nos | - | - |
| 6 | After completion of overhaul works, charges for measuring overall lift, providing correct lift and locking with lock nut. Alignment of cooling water pump with motor after tightening of motor bed bolts and finally observation and attending of minor defects noticed during trial run of cooling water pump. | 2 | Nos | - | - |
| 7 | Charges for loading the pump shafts and bushes to outside work shop for machining and bring it back to MTPS-I after machining and unloading it in Cooling water pump house. | 2 | Nos | - | - |
| 8 | Charges for painting with one coat of rust convertor , one coat of epoxy red oxide primer and one coat of epoxy high build coal tar one over the other with proper intervals for the water immersed pump components. | 224 | M2 | - | - |
| 9 | Painting charges for two coats of enamel light / smoke grey, black, green paint including cleaning the surface for discharge elbow, thrust pad, motor stool, bearing housing (black paint), lubricating oil cooling water lines (green paint) etc. | 122 | M2 | - | - |
| 10 | Charges for dismantling & renewal of corroded G.I pipe lines such as dia 25 mm & 15 mm and its fittings in cooling water pump air release and cooling line by new pipe line which includes pipe cutting to required size & laying along with fittings and valves wherever required. (25 mm G.I pipe and fittings will be provided by TNPGCL) | 50 | Mtrs | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.74 MB
BOQ_786536.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].