Sunderpur - Estimate for P...

Amount

Less Credit for old brick and brick bats taking 40% bricks bats

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : Make IVC/VAG (250 mm i/d )

Raw Water Pumping Machinery:- Supply, Erection, testing and commissioning of Horizontal Motor Pumping Set for Raw Water Having Head as per the Indicated Requirements of Discharge in LPM and Power capacity in BHP as per IS marked Complete in all respect . 1200 LPM 12.5 Mtr. Head

Supply, erection, testing and commissioning of wall mounted electrical Bus Bar panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 900 x 1200 mm with 900 mm deep having following accessories as below specification:- 1. Incomer switch 32 Amp. 2. Copper bus bar chamber of 50 Amp. Capacity. 3. Volt meter 100 x 100 mm range 0 to 500 v (AE/KAPPA/LandT) 4. Indicting Lamp one set 5. Copper Bus Bar (Size 60 mm x 12 mm) 3 Nos.

Supply, erection, testing and commissioning of wall mounted electrical Bus Bar panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 900 x 1200 mm with 900 mm deep having following accessories as below specification:- 1. Incomer switch 125 Amp. 2. Copper bus bar chamber of 100 Amp. Capacity. 3. Volt meter 100 x 100 mm range 0 to 100 v (AE/KAPPA/LandT) 4. Indicting Lamp one set 5. Copper Bus Bar (Size 60 mm x 12 mm) as per required

Supply, erection, testing and commissioning of wall mounted electrical LT Panel board, fabricated from 16 SWG CRCA sheet duly stouten with suitable angle iron frame work and completely powder coated of suitable size deep having following items for 2 Nos. Horizontal Pumping sets (1200 LPM, 12.5 Mtr. Head for Raw Water) a) Main switch suitable ampere 1 No. (LandT Siemens, ABB) b) CT 100/3 = 1 Nos. (AE/ KAPPA/ LandT) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, star delta 1 No (LandT Siemens, ABB) f) VSS 1 No. and ASS 1 Nos. of approved make. g) Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each)

Supply, erection, testing and commissioning of wall mounted electrical LT Panel board, fabricated from 16 SWG CRCA sheet duly stouten with suitable angle iron frame work and completely powder coated of suitable size deep having following items for Horizontal Pumping sets (1200 LPM, 45 Mtr. Head for Clear Water) a) Main switch suitable ampere 1 No. (LandT Siemens, ABB) b) CT 100/3 = 1 Nos. (AE/ KAPPA/ LandT) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, star delta 1 No (LandT Siemens, ABB) f) VSS 1 No. and ASS 1 Nos. of approved make. g) Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each)

Supply, erection, testing and commissioning of wall mounted electrical LT Panel board, fabricated from 16 SWG CRCA sheet duly stouten with suitable angle iron frame work and completely powder coated of suitable size deep having following items for Horizontal Pumping sets (1800 LPM 30 MTR HEAD for Raw water at titoli W/W) a) Main switch suitable ampere 1 No. (LandT Siemens, ABB) b) CT 100/3 = 1 Nos. (AE/ KAPPA/ LandT) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, star delta 1 No (LandT Siemens, ABB) f) VSS 1 No. and ASS 1 Nos. of approved make. g) Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each)

Operation and Maintenance during 1st year after defect liability period.

Operation and Maintenance during 2nd year.

Operation and Maintenance during 3rd year.

Operation and Maintenance during 4th year.

Operation and Maintenance during 5th year.

Operation and Maintenance for complete scope of work mentioned in the DNIT (Disinfection material supplied by PHED) as per schedule-IV for a period of 5 year after 12 month during defect liability period and 03 Months trial run will be charged to the A/Mtc. estimate complete in all respect as per approved NIT (i) Operation and Maintenance during defect liability period (Operation only) after 3 month trial run.

WATER TREATMENT PLANT (WTP) Desinging , Testing , Commissioning of 0.50 MLD capacity Water Treatment Plant including inlet channel Alum dozing, Flash mixing, Clari floculator, filter box, over head Reservoir for back wash, waste water tank including all civil work pumping machinery and electric cabling, control panel, entire piping network of suitable size laying of DI pipes from raw water pump o inlet Box of WTP, WTP to CWT & Suction well for CW including , DI specials, suitable size sluice valves Hodies manhole covers, air scour equipment, chemical house including chlorination equipment and arrangement of flow measurement and sand bed with automation complete in all respects as per NIT (Sluice valve of make IVCAWAG )

Less Credit for old brick and brick bats taking 60% bricks

Raw Water Pumping Machinery:- Supply Erection testing and commissioning of Horizontal Motor Pumping Set for Raw Water Having Head as per the Indicated Requirements of Discharge in LPM and Power capacity in BHP as per IS marked Complete in all respect . 1800 LPM 30 Mtr. Head

SITC of LT aluminium conductor 10sqmm 3.00 core armoured cable with ISi marked standared make complete in all respect up to entire statisfaction of the Engineer in charge of work.

Supply of LT aluminium conductor 50sqmm 3.50 core armoured cable with ISi marked standared make complete in all respect up to entire statisfaction of the Engineer in charge of work.

Supply of XLPE 11 KV HT aluminium conductor 25sqmm 3 XLPE armoured cable with ISi marked standared make complete in all respect up to entire statisfaction of the Engineer in charge of work.

Supply, erection, testing of 3.5 core copper cables with ISI marked for makeing connection with LT Bus Bar and LT Panel Board to electric motor and other electric appliance with underground system in PVC / flexible pipes/ cable tray with all required accessories like thimble etc. as directed by Engineer-in-Charge complete in all respect. 16 Sqmm 3.5 core

Supply, erection, testing of single core copper wire with ISI marked for making connection with LT Bus Bar and LT Panel Board to electric motor and other electric appliances with underground system in PVC/flexible pipes/ Cable tray with all required accessories like thimble etc. as directed by Engineer-in-Charge complete in all respect i) 10 Sq. mm sinle core copper wire

Supply, erection, testing of three core copper cables with ISI marked for makeing connection with LT Bus Bar and LT Panel Board to electric motor and other electric appliance with underground system in PVC / flexible pipes/ cable tray with all required accessories like thimble etc. as directed by Engineer-in-Charge complete in all respect. 6 Sqmm three core

Bidder Name

Amount

SUBHASH MALIK CONTRACTOR(GSTN-06ANZPS3487P1ZL)

Naveen(GSTN-NA)

Naveen

Naveen