Supply of Hand Pump Spare Part India Mark II At Amravati Dist Amravati

Amount

Supply of Hand Pump Spare Part India Mark II

Telescopic Stand Assembly (India Mark 2 ) Deep Well Hand Pump Recommaded for use in Borewell Having 150 NB Casing pipe IS - 15500 ( Part II) 2004

Water Tank For Deep Well Hand Pump IS - 15500 ( Part 4) 2004

Pump Buckets for Deepwell hand pump IS - 15500 ( Part 7) 2004

Handel Axle for Deepwell Hand Pump IS - 15500 ( Part 4) 2004

Single Side Shield Bearing conforming to suitable for above Hand Pumps - Make SKF

Cylinder Body With brass liner for deepwell hand pump IS - 15500 ( Part 5) 2004

Upper Valve Assembly with (2 No.) NITRILE Rubber Pump Buckets and Compressing of Plunger Yoke Body , Upper Valve, Rubber Seating, Spacer and follower suitable for Deep Well Hand Pump (IM-2) IS - 15500 ( Part 6) 2004

Upper Valve Complete for Deepwell Hand Pump IS - 15500 ( Part 6) 2004

Third Plate for Deepwell hand pump IS - 15500 ( Part 4) 2004

Handle for deepwell hand pump IS - 15500 ( Part 4) 2004

Pipe Wranch 450 mm (Heavy Duty)

Pipe Wranch 600 mm (Heavy Duty)

Self Locking Clamp For 32 mm NB Pipe (Heavty/duty )

Lower Valve Assembly Compressing Rubble Sheet Retainer , Rubber Seating , Check Valve and Check Valve Seat Suitable for Deep well Hand Pump (IM -2) IS - 15500 ( Part 6) 2004

32 MM Nominal Bore Hot Deeped Galvanizing Scrawed and Socket Pipe In 3 M Length with a tollarance of + 0 mm to - 25 mm IS : 1239 (Part 1 and 2 ) 1992 Medium class the socket shall be manufactured seamless pipe or machined for solid bar conferming to gread F1 410 - S of IS : 226 /1975 with diamension ( lenght and Diamension ) Specified in IS: 1239 ( Part 2) 1982 and shall been hot deeped galvanized one end of the Riser pipe shall be fitted with hotdeeped galvanized coupler and other with thread protected pipe supplied should have IS: 1239 Mark embossed on it. Note :- 3 mrt length of pipe will be measured without socket IS: 15500 (Part 2) 2004 Weight :- 3.17 Kg / Mtr Wall thickness :- 3.25 mm Onthickness + 10 - 8 percent On Weight: +10-8

Sealing Ring for Deepwell hand pump IS: 15500 (Part 7) 2004

Chain with coupling for deepwell hand pump IS: 15500 (Part 4) 2004

Check Valve complete including rubber seating and rubber ratainer for deep wall hand pump IS: 15500 (Part 6) 2004

Hand pump head only with out handle and chain IS: 15500 (Part 4) 2004

Reducer cap for cylender of deep well hand pumps IS: 15500 (Part 5) 2004

Socket for Riser Pipe for deepwell hand pump IS: 15500 (Part 4) 2004

Adjustalbe Spanner ( Size 10 inch heavy Duty )

Connecting Rod 12 mm x 3 mtr length with Hex -coupler made for bright bar electro Galvanized as per IS: 15500 (Part 2) 2004

Cylender Assembly ( Complete unit inclusive of Stainless Steel Plunger Rod 12mm dia with NITRILE Rubber pump buckets ) Suitable for Deepwell hand pump ( IM -II) IS: 15500 (Part 2) 2004

Top Cover (front Cover - IM II )

Hexagonal coupling ( M 12 x 40 )

DEEPWELL PUMPS AND ENGINEERING CO. PVT. LTD.