8680 WELCOME MAINT AND ALLIED BR WORK AT ALC CH COMPLEX SAIBABA COMPLEX 4 RMC NO 1 LINE GWALIOR LINE KT LINE OTP LINE ODL EME WKSP WR STN MINTSD UNDER AGE BR II OF GE SOUTH PUNE

Amount

M&L for preparation of old decorated surfaces of walls by brooming down and scrapping whereever necessary and applying one coat of white wash complete all as specified and directed

M&L for preparation of old decorated surfaces by brooming down and scrapping wherever necessary and applying one coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of old decorative surfaces of ceiling including cornices (plastered or unplastered) by brooming down and scrapping wherever necessary and applying one coat of distemper oil emulsion on ceiling complete all as specified and directed

M&L for preparation of old decorated surfaces of wall by brooming down and scrapping wherever necessary and applying one coat of distemper oil emulsion complete all as specified and directed.

Complete removal of existing treatment and M&L for applying 3mm thick wall care putty including with applying two coats of distemper oil emulsion over a coat of primer on walls after and making the surfaces even and smooth by using sand paper etc. complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any descrition exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old decorated surfaces by brooming down and scrapping wherever necessary and applying one coat of weather proof exterior acrylic emulsion paint (1st Quality) on walls, cornices, borders, facia of chajjas & projected columns complete all as specified and directed. Note: Exterior acrylic emulsion paint shall be anit-fungal, dust resistant, water repellant, crack-bridging, weather proof type of 1st Quality

M&L for complete removal of existing treatment and applying two coats of weather proof exterior acrylic emulsion paint (1st Quality) on walls, cornices, borders, facia of chajjas & projected columns over and including priming coat of exterior primer complete all as specified and directed. Note: Exterior acrylic emulsion paint shall be anit-fungal, dust resistant, water repellant, crack-bridging, weather proof type of 1st Quality

M&L for cleaning of Manglore tile roof by scrapping, cleaning by water jet etc and applying two coats of Apex Ultima Weather shield paint or tinted over a coat of primer etc complete all as specified and directed. Note : Contractor has to give 3 Years Guarantee Certificate, if within guarantee period Apex removes / washout, contractor has to re-paint with Apex at his own cost.

M&L for preparation of old painted surfaces of stone, concrete or plastered surfaces of any description over 10cm girth or width, not otherwise described and applying one coat of synthetic enamel paint complete all as specified & directed

Complete removal of existing treatment and M & L for applying two coats of texture paint over a coat of primer for creating the texture based effect by using required tools like brushes, sponges, spatulas and special texture rollers on wall surfaces over & including 2mm thick wall care putty etc complete all as specified and directed

M&L for writing letters on and including PVC coloured sheet of size 450mm x 200mm x 6mm thick, Writing letters / Numerical as directed by Engineer-in-Charge and fixing to building with screws 4 Nos. in each on any height of building or up to 12m height, size of letter shall be 80x125mm with maximum of 4 letters complete all as specified and as directed

M&L for writing letters on and including PVC coloured circular sheet of size 450mm dia & 6mm thick, Writing letters / Numerical as directed by Engineer-in-Charge and fixing to building with screws 4 Nos. in each on any height of building or up to 12m height, size of letter shall be 80x125mm with maximum of 4 letters complete all as specified and as directed

M&L for rendering 10mm thick in CM 1:3 on concrete surfaces / slabs finished even and smooth without using extra cement but mixed with liquid water proofing compound as per manufacturer’s instructions including filling of depressions if any to receive water proofing treatment and supplying and laying of APP based polymeric membrane minimum having minimum weight 3.0 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (Weight not less than 150 Grams/Sqm) laid over an including primed surface @ 0.30 litre /Sqm by torched application including dismantling / taking out of existing roof treatment having in single layer or multi layer in roofs of any thickness including taking down of plaster, concrete padding including brick tiles or terracing tiles of any description from horizontal and vertical surface and removing dismantled materials and debries to a distance exc. 500m complete all as specified and directed by Engr-in-Charge Note:- Liquid water proofing compound will be measured and paid separately.

Supply only liquid water proofing compound, complete all as specified and directed.

M&L for bitumastic gola, with 80/25 bitumen and course sand mixture in 1:3 by weight, for filing in joints between two panels, complete all as specified and directed

Demolition of cement concrete in ground floor and pavings n. exc. 15 cm thickness (below or above GL), complete all as specified and directed.

Demolition of stone slab & tiles of any description or thickness in floor, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (Using 40mm graded stone aggregate), 75 mm thick as in plinth protection laid as to bays finished even and smooth with out using extra cement, complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by brooming down and scrapping whereever necessary and applying one coat of cement base paint white or tinted complete all as specified and directed

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M 35 grade with approved colour, design & pattern as in foot path, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including dismantling of old stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar complete all as specified and as directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick, 150 GSM of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified & directed.

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick, 150 GSM of any colour having tensile strengh of 550 mpa as of roof covering/ridges fixed with self tapping screws complete all as specified & directed.

S&F in repairs vitreous china ceramic white, single piece WC of size 365x655x765 mm, with UF soft close seat cover including S or P trap, hinges, accessories set, product Code: LYS-WHT-38851SSM of Jaquar of equivalent cat part from the makes as mentioned here-in-after, complete all as specified and directed.

S&F in repair cascade type (coloured) floor mounted water closet with low level flushing cistern, single piece coloured with floor trap with and including PVC coloured seat cover and connecting to pipe etc complete all as specified and directed by Engr-in-charge

S&F rubber door seal of 32mm vide with aluminium strip of size 19mm wide fixed with machine made steel screws with washers complete all as specified and directed

M&L for taking out plants/ small tree (Dia exc. 1 inch but n. exc. 3 inch) and its surrounding vegetation, digging out roots, filling cracks / holes with CM 1:2 and leveling off surfaces to match the existing surface on walls, chajjas etc complete all as directed by Engr-in-Charge. Note:- Taking out of one plant / tree and its surrounding vegetation and making good surface shall be measured as one Job for payment purpose.

M&L for prepration of new or previously untreated wooden surface and apply two coats synthetic enamelled paint over one coat of pink primer of any descriptiion, not otherwise described over 10cm width or girth, complete all as specified and directed.

M&L for prepration of new or prreviously untreated steel surface and apply two coats synthetic enamelled paint over one coat of red oxide primer of any descriptiion, not otherwise described over 10cm width or girth, complete all as specified and directed.

S&F three track sliding window with two or more shutter witth 4 mm thick tinted glass, one shutter of stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing, handle lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified directed by Engr-in-Charge. (a) Bottom frame 20957 (b) Top frame & Verrtical 20958 (c) Handle (side) 20606 (d) Shutter inter lock 20605 (e) Shutter top & Bottom 20604 (f) Glazing Clip 19352

S & F in repairs ventilators / louvers using 4mm thick x 10cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed (a) SP : 20048 (b) Glazing clips : 19352

S&F in repairs powder coated anodised aluminium fixed partition, comprising of at least 63.50 x 38.10 x 1.85 mm aluminium section with and including jointing cleats, aluminium snap beading 20x15mm, rubber gasket, glazing clips, 5mm thick frosted glass in top and 12mm thick pre-laminated particle board (both side laminated) in bottom panel, fixed with and including rubber beading and glazing clips & all other fittings required to errect as per site requirement complete all as approved by Engr-in-charge

S&F in repair aluminium partition with pre-laminated particle board at bottom panel with and including 5.5mm thick glass on top panel including glazing clip and neosprene rubber beading complete all as directed by Engr-in-Charge

Dismantling of wrought or MS work of any description etc complete all as specified and directed.

M&L for mild steel framed work conforming to grade E-165 (Fe-290) or Fe-310-O of MS angle or other sections, such as grills, gratings with ends of bar shouldered and / or riveted or forged into spikes; framed guard bars; railings and like incl dismantling old existing grill/ grating wk or wrought iron work of any desc and any position, gates etc complete all as specified and directed.

S&F mild steel framed work for doors or gate of angle, plain sheet or other sections etc. complete drilled for fixing of steel sheeting, incl necessary welding etc of grade Fe-410-w(Gde-E-250 quality B) complete incl dismantling structural steel incl doors or wrought iron work of any desc and any position, gates etc complete all as specified and directed.

M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 595 x 595 x 9 to 9.5mm thick in size, of approved brand / make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light including dismantling of old un-serviceable ceilings complete all as specified and directed.

S&F aluminium powder coated single leaf door on pivots with and including hydraulic door closer door lock , handle, 5mm thick plan glass fixed with rubber beading in top panel and glazing clips MS clamps and 12mm thick laminated particle board as bottom pannel both side laminated using following sections as given in 'JINDAL' catelogue or equivalent complete all as specified and as directed:- (a) Rectangular tube - 14005 (b) Vertical rail - 19501 (c) Top rail -19503 (d) Middle rail -20060 (e) Bottom rail- 19511

M&L for providing and fixing Gypsum Board 12.50mm thick in ceiling fixed with screw (as per manufacturers instructions) to Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including two coats of oil bound distemper over primer on ceiling including dismantling of existing false ceiling with grid complete all as specified and directed.

M&L for decorative POP cornices / moulding of pattern as per approved by Engr-in-charge of cross section area exc 13 Sqcm and not exc 25 Sqcm including two coats of oil bound distemper over primer on ceiling complete all as specified and directed.

Hacking out old broken glass of any thickness / size or quality from wooden/metal frame fixed With putty / beading & S&F 3mm thick sheet glass, plain or frosted ordinary quality not exc 0.5 sqm in each pane complete all as specified and as directed.

Hacking out old broken glass of any thickness / size or quality from wooden/metal frame fixed With putty / beading & S&F 5.5mm thick sheet glass, plain or frosted ordinary quality not exc 0.5 sqm in each pane complete all as specified and as directed.

S&F in repairs aluminium (Extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing poivet made of brass, other parts made of brass, other part made of mild steel heavy duty and fixed, complete all as specified and directed.

M & L for water proofing treatment to sunken slab, walls, etc. shall be carried out as specified below and as directed by Engineer-in-Charge:- (a) Dismantling & remove the existing lean concrete completely and clean the sunken portion of toilet / Baths / WCs / Kitchen thoroughly remove laitance, dirt, dust etc. (b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor by using polymer modified mortar (“ Dr fixit” Pidicrete URP” or equivalent). (c) Sanitary pipes entering through walls and floor shall be sealed with “Dr Fixit Bathseal Tape” and the gaps to be grouted with non-shrink cementitous grout “Dr Fixit Bathseal Grout” or equivalent. Nahani traps etc to be fitted securely and the gaps around it to be grouted in the same manner. (d) Apply one coat of a Bitumen-modified polymer coating “Dr Fixit Bathseal Plus” or equivalent on all angle fillets by brush and cover it with 100mm open woven mesh when it is still wet and applying second coat of the same coating on the angle fillets and allow it to dry completely.

(e) In the remaining area, in dry substrate condition brush apply first coat of the same coating and further apply second coat when first is dry. Extend the coating upto 150mm above the FFI. Above FFI, another cementitious waterproofing waterproof coating “Dr Fixit Pidifin 2 K” or equivalent to be further applied right upto 2.1 m to waterproof the shower area also, if it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6-8 hoours and allow to dry completely. (f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed M 15 type B0 mixed with integral WPC (Liquid) laid to stope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2. (g) After completing plumbing work in the toilet/WC/Bath/Kitchen, floor, tiling work (floor and dado) to be carried out by using suitable Tile Adhesives and ready to make tile grouts of approved makes such as Dr Fixit, FOSROC SIKA, MC BUCHEMIE, ROFF, etc. Note:- Lean concrete 1:5:10 type E-2 shall be measured and paid separately under respective item of BOQ.

M&L for PCC 1:5:10 type E-2 using 40 mm graded brick aggregate as in filling sunken portion, complete all as specified and directed.

S&F in repairs aluminium sheet of 0.5 mm thick, fixed with steel screws to doors shutters complete all as specified and as directed

M&L for non skid ceramic colored tiles 7 to 8mm thick (square / rectangular), area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6, including dismantling floor hearth including cement bedding layer of any type and removing of debries & demolished materials and rubbish off the premises complete all as specified and as directed.

M&L for non skid ceramic colored tiles 7 to 8mm thick (square / rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6, including dismantling floor hearth including cement mortar bedding layer of any type and removing of debries & demolished materials and rubbish off the premises complete all as specified and as directed.

M&L for non skid ceramic colored tiles 7 to 8mm thick (square / rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in skirting etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 10mm thick backing coat in CM 1:4 with and including triangular filletting in CM 1:4 on top edges, including dismantling of existing skirtings including backing coat of any type and removing of debries & demolished materials and rubbish off the premises complete all as specified and as directed.

M&L for ( light shade) Virified Ceramic tiles, 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 including dismantling floor hearth and cement mortar bedding layer of any type and removing of debries & demolished materials and rubbish off the premises complete all as specified and as directed

M&L for ( light shade) Virified Ceramic tiles, 8-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 but not exceeding 1.00 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 including dismantling floor hearth and cement mortar bedding layer of any type and removing of debries & demolished materials and rubbish off the premises complete all as specified and as directed

M&L for ( light shade) Virified Ceramic tiles, 8-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 but not exceeding 1.00 Sqm as in skirting / dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10 mm thick backing coat in cement mortar 1:4 with and including triangular filletting in CM 1:4 on top edges, including demolition of old unserviceable tiles of any description including taking down of backing coat any type and removing of debries and dismolished materials and rubbish off the premises complete all as specified and as directed.

M&L for glazed colour ceramic tiles, designed of size 600mm x300mm x 7 to 8mm thick on walls / vertical surfaces, laid over and including 15 mm thick CM 1:4 backing coat with and including triangular filletting in CM 1:4 on top edges, set and jointed in neat cement slurry and pointed in coloured cement to match with colour tiles including demolition of old unserviceable tiles of any description including taking down of backing coat any type and removing of debries and dismolished materials and rubbish off the premises complete all as specified and as directed.

M&L for glazed colour ceramic tiles of size 300mmx200mm x 7 to 8mm thick on walls / vertical surfaces, laid over and including 15 mm thick CM 1:4 backing coat with and including triangular filletting in CM 1:4 on top edges, set and jointed in neat cement slurry and pointed in coloured cement to match with colour tiles including demolition of old unserviceable tiles of any description including taking down of backing coat any type and removing of debries & dimolished materials and rubbish off the premises complete all as specified and as directed.

M&L for 25 mm thick concrete type B-0 1:2:4 using 12.50 mm graded stone aggregate as in floor leveling course etc., complete all as specified and directed.

M & L for granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, Door cills ,cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite laid over and including 15 mm thick backing coat in CM 1:4 including demolition of existing old unserviceable stone slabs and tiles of any description or thickness, and removing of debries & demolished materials and rubbish off the premises complete all as specified and as directed

Rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations, complete all as specified and directed.

Cutting grooves on stone slab such as in steps etc. and other similar situations, complete all as specified and directed.

M&L for machine cut cuddappa stone slabs, one side polished, 20 to 25 mm thick, set in neat cement slurry, jointed in CM (1:3) laid over and including 20 mm thick screed bed in CM 1:4 including dismantling of old unserviceable stone slabs and tiles of any description or thickness, complete all as specified and directed.

S&F in repairs flush handle PVC with adjustable Lever and hook suitable for low level flushing cistern complete all as specified and as directed

M&L for removal of air lock / blockage of water in GI tubing 15mm bore of any type including taking down (if required), cleaning the pipe or fittings etc and re-fixing the same in position complete all as directed by Engr-in-charge Note:- Removing 01 air lock / blockage from pipe line and make it functional shall be measured as one Job.

M&L for removal of air lock / blockage of water in GI tubing 20mm bore of any type including taking down (if required), cleaning the pipe or fittings etc and re-fixing the same in position complete all as directed by Engr-in-charge Note:- Removing 01 air lock / blockage from pipe line and make it functional shall be measured as one Job.

Taking down shutters of any description n.exc 1.0 sqm each and rescuring or easing & adjusting after repair in door opening and connected carpentry work and refixing at same opening complete all as speicified and directed.

Taking down shutters of any description exc 1.0 sqm but n.exc 2.00 Sqm each and rescuring or easing & adjusting after repair in door opening and connected carpentry work and refixing at same opening complete all as speicified and directed.

Taking down shutters of any description exc 1.0 sqm and n exc 2 sqmtr complete all as specified & as directed

S&F in repairs pressed steel frames of size 105mm X 60 mm for doors with one or more rebates including necessary lugs, hinges, lock strikes plate, including providing PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) to fill up the hollow portion of the frame including taking down of old chowkat with shutter without taking off shutters from the frame including making good the distrubed surface complete all as specified and directed.

S&F in repairs pressed steel frames of size 125mm X 60 mm for doors with one or more rebates including necessary lugs, hinges, lock strikes plate, including providing PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) to fill up the hollow portion of the frame including taking down of old chowkat with shutter without taking off shutters from the frame including making good the distrubed surface complete all as specified and directed.

S&F 35 mm thick factory made 2nd class hardwood gauged and skelton shutters open rebated and prepared to receive glass / gauze etc ( without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR part-I Section 8 cluse 8.24(a) and fitted to chowkats complete all as specified and as directed.

S&F 35 mm thick factory made 2nd class hardwood plain framed panelled shutters of any number member of panels with panels of timber flat on both sides of wood particle board with commercial face veeners. The size of rail and stile as per IS : 1003 (Part I ) kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with lipping complete all as specified and as directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in opening incl taking down of chowkat with shutter without taking off shutters from the frame including making good the distrubed surface complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions and as directed by Engineer-in-Charge.

S&F 100mm size of butt hinges, medium weight cold rolled mild steel complete all as specified and as directed.

S&F aluminium anodised sliding door bolts 300 mm size with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 150mm size extruded aluminium alloy tower bolt fabricated type anodised complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and directed.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repairs 150mm size extruded aluminium alloy tower bolt fabricated type anodised complete all as specified and directed.

S&F in repairs 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and directed.

S & F in repairs aluminium anodised sliding door bolts 300 mm size with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repairs 100 mm size stainless steel fancy type handles complete all as specified and directed.

S &F in repairs 20 mm bore aluminium powder coated curtain rod (Medium weight) complete all as specified and as directed.

S&F in repairs aluminium powder coated fancy type bracket suitable for 20 mm bore curtain rod complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to steel or wooden windows / door / shutters / frames etc. complete all as specified and as directed.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to steel or wooden windows / door / shutters / frames etc. complete all as specified and as directed.

S&F 18 mm thick PVC sheet shutter one side prelam of any shade as in cupboard or kitchen cabinet etc complete all as specified and directed.

S&F continuous (piano) hinges 30 mm width of flap,mild steel, bright finish or electrogalvanised complete all as specified and as directed.

S & F Magnetic door catches for cupboard / cabinet etc complete all as specified and as directed.

S&F 100mm dia brass handles, cast type, polished bright cupboard handles fixed with nuts screws and washer complete all as specified and directed.

M&L for running welding in repairs not exc 6mm thick plates and angles complete all as specified and as directed.

S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge

S&F in repair floor door stopper of aluminium alloy body double tongue annodised with rubber shoe and fixed of size 140 mm complete all as specified and directed

M&L for repairing of existing aluminium door single leaf including oiling and greasing of floor springs and making the door and shutter functional / serviceable complete all as directed. Note:- Floor door springs where required shall be measured and paid separately

M&L for repairing of existing aluminium door double leaf including oiling and greasing of floor springs and making the door and shutter functional / serviceable complete all as directed. Note:- Floor door springs where required shall be measured and paid separately

M&L for 3mm thick Aluminium Composite Panel (ACP) exterior grade (skin thickness 0.25mm) with one core of material of virgin LDPE and coating of kynar 500 resin based PVDF coating (metallic colour) with joint filling silicon weather proofing of wooden finish including making groove and shelf complete all as specified and directed.

S&F in repairs PVC syphon with rod suitable for low level flushing cistern including PVC handle with adjustable lever (flushing cistern kit) complete all as specified and as directed

S&F rotational moulded polyethylene water storage tank 500 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with and including tank nipple of existing size dismantling water tanks and removing to store complete all as specified and directed by Engineer-in-Charge

S&F rotational moulded polyethylene water storage tank 1000 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with and including tank nipple of existing size including dismantling water tanks and removing to store complete all as specified and directed by Engineer-in-Charge

S&F rotational moulded polyethylene water storage tank 2000 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with and including tank nipple of existing size including dismantling water tanks and removing to store complete all as specified and directed by Engineer-in-Charge

S & F in repairs ball valves high pressure of PTMT with epoxy coated, aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 15 mm bore complete all as specified and directed

S & F in repairs ball valves high pressure of PTMT with epoxy coated, aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 20 mm bore complete all as specified and directed

S & F in repairs ball valves high pressure of PTMT with epoxy coated, aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 25 mm bore complete all as specified and directed

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping, benching, roof kerbs or mud stops including weathering and throating including necessary form work (if required) etc., complete all as specified and directed.

Disconnecting existing water storage tanks of any capacity exc. 500 litre capacity but n. exc. 1000 ltrs and setting aside or lowered if required and re-fixing in the same position after carryout necessary roof treatment work including necessary fittings like float valve, tank nipple and GI pipes (if any required), complete all as specified and directed. Note:- Necessary temporary arrangement for water supply during roof treatment work shall be done by the contractor at his own cost.

Supplying, fixing, jointing and testing galvanised iron tubing medium grade including with all fitting & fixtures such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floor including taking up or down of old unserviceable GI water tubing complete all as specified and as directed for the following sizes:- (a). 15mm bore.

(b). 20mm bore

(c). 25mm bore

Refixing old serviceable GI pipe and connection in new or old position (Wall, ceiling floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed for following size of pipe :- Note :- Serviceable pipe shall be used under this item, obtained from serial item nos. 108 to 108.10. (a) 15 mm dia bore

(b). 20mm bore

S & F gun metal gate valves (Class I), with iron wheel head, screwed both ends for iron pipe, ISI marked, complete all as specified and directed for the following bore dia of pipe:- (a) 15mm bore.

(b) 20mm bore.

(c) 25mm bore.

(d) 32mm bore.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades,shelves , lintels, etc.and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.

M & L for Cleaning of PVC water tank of capacity upto 500 ltr and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. by using bleaching powder complete all as specified and directed

M & L for Cleaning of PVC water tank of capacity upto 1000 ltr and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. by using bleaching powder complete all as specified and directed

S&F in repairs flexibe waste pipe of 32 mm or 40 mm dia of suitable length and suitable for wash hand basins, sink etc complete all as specified and directed

S & F in repairs stainless steel gratings 100 mm dia with hole for waste pipe complete all as specified and directed

S&F PVC (SWR), 75mm dia outlet multi floor trap with grating including jointing with solvent cement, complete all as specified and directed.

S& F in repair 5mm thick sheet glass corner shelf, 250mm radius including CP railing and CP brackets, complete all as speicified and directed.

S&F in repairs elbow operated pillar tap cast copper alloy, brass chromium plated, screw down, single lever surgical purpose with extended operating lever, complete all as specified & directed. Make:- Jaquar Product code ID-FLR-5031N or equivalent model in Hindware / CERA

S & F in repairs stainless steel kitchen sink without drainage board of 1 mm thick with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets or fixed as in existing counter type in granite/ cudappa platform and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 1020mm x510mm bowl size 460mm x 360mm x 160mm, complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, 550x 400mm flat back including providing CI brackets, PVC waste pipe 32mm dia, waste coupling 32mm bore of CP including 15mm bore pillar tap, chromium plated, fancy type etc all as specified and directed.

S&F in repairs 15mm bore bib taps, brass chromium plated, cast copper alloy fancy type handle screwed down, screwed for iron pipes complete all as specified and directed.

S & F in repairs 15 mm bore brass chromium plated 2 way bib cock fancy type with wall flange complete all as specified and directed.

S & F in repairs 15 mm bore pillar taps,fancy type cast copper alloy with capstan heads, chromium plated , screwed down high pressure with long screwed shanks and fly nuts, complete all as specified and directed

S & F in repairs 15 mm stop valves / angular stop cock, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repairs 20mm stop valves / angular stop cock, concealed long shank, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs CP Wall mixer 3-in-1 for mixing of hot & cold water screwed down for iron pipe and fixed for 15mm bore of pipe complete all as specified and directed.

S & F in repairs 125 mm dia brass chromium plated shower rose including shower arm of approved quality complete all as specified and directed.

S & F in repairs CP health faucet (ABS Body) with 1 mtr long flexible cod complete all as specified and directed.

S & F in repairs 15 mm bore, 600 mm long PVC connections with PTMT nuts complete fixed to iron pipe at both ends complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed.

S & F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed

S & F in repairs chromium plated soap dish fixed to plugs with chromium plated brass screws, complete all as specified and directed .

S&F in repairs stainless steel towel ring of dia as per trade pattern, CP, fixed with and including chromium plated brass screws and wooden / plastic cleats or royal plugs, complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan, 'Pedestal' coloured, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinges devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 ltrs capacity make ISI or equivalent incl all internal fitting, pair of bracket, including inlet/outlet PVC pipe connections etc, complete all as specified and as directed.

Dismantling of single layer mangalore pattern roof tiles or similar tiles, interlocking at side joints, laid dry complete all as specified and as directed.

S&F of roof tiles, mangalore pattern, Grade 'AA', inter locking at side joints laid dry etc, including dismantling of old unserviceable mangalore pattern tiles complete all as specified and directed.

All as per item no. 138.10 but fixing only complete all as specified and directed.

S&F of ridge tile or hip tiles suitable for mangalore pattern of roofing tiles bedded and jointed in CM (1:6) etc, complete all as specified and directed.

All as per item no.140 but fixing only in repairs complete all as specified and directed.

Dismantling battens for tiles shingles etc of any size including tiling fillets exc 15 cm spacing etc complete all as specified and directed.

M&L for IInd class hard wood clean sawn battens exceeding 5 and n. exc 15 sqcm in cross section, spaced at 30cm centres complete all as specified and directed.

Fixing only IInd class hard wood clean sawn battens at 30cm centres exc 5 and n exc 15 sqcm ( Except batten) complete all as specified and directed.

S&F IInd class hard wood timber clean sawn as in scantling including dismantling of old existing timber scantling in any position (unframed wok) exc. 40 sqcm in section complete all as specified and directed.

S&F in repairs IInd class hard wood 20mm thick boarding fixed with nails in any situation planed one side with butt joints complete all as specified and directed.

Dismantling timber scantling unframed in post, rafters, purlins etc under 40 Sqcm in section and M&L for plain fillets of IInd class hard wood exc 13 but n. exc. 25 sqcm in section square rectangular or triangular in section secured with screwes complete all as specified and directed.

M&L for preparing surfaces of slate battens, any size and spacing prepared and treated all over (measured overall on one side only, spaces not deducted) and applying two coats creosote oil complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting in roof covering complete all as specified and directed.

S&F 0.63 mm thick grade 'O', GI corrugated mild steel sheeting with grade 'B' corrugation, zink coating @ 120 GSM inclusive of both side, laid with two corrugation side lap, fixed with 'L' type or 'J' type or cranked hook in roof complete all as specified and directed.

S&F 0.80mm thick PGI mild steel sheets with zinc coating @ 120 gm/sqm inclusive of both side as in ridge, hips, valley, gutters and straight flashings complete all as specified and directed.

S&F PVC (SWR) 110mm bore pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall including dismantling of old unserviceable breaking up drain pipes PVC or AC set in CM or solvent, complete all as specified and directed. Note for item nos.152 & 153:- Rate quoted shall deemed to be inclusive of necessary scaffolding & security measures as the work has to be carried out for elevated height upto 12 mtr height building.

S&F PVC (SWR) 75mm bore pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall including dismantling of old unserviceable breaking up drain pipes PVC or AC set in CM or solvent, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends / Tee with acess door, complete all as speicified and directed.

S&F 75mm bore PVC (SWR) bends / Tee with acess door, complete all as speicified and directed.

S&F in repapir plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover including mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs HDPE PVC lid (cover) suitable for 500 ltr to 1000 Ltrs capacity PVC water tanks, complete all as speicified and directed.

S&F in repairs 2mm thick PVC fibre mirror cabinet of size (450x325x120mm ) and fixed to wall after taking down old unserviceable mirror, complete all as speicified and directed.

S&F in repairs mild steel chromium plated grating (round) 125 mm dia fixed over floor / nahani trap (with hole OR without hole), complete all as speicified and directed.

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants holder, regulators sockets, light fitting etc and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for point wiring with 1.5 sq mm copper conductor FRLSH (multi-strand) PVC insulated ISI marked unsheathed cable and including surface, Non metallic rigid PVC casing capping double lock type / PVC conduit ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unsheathed FRLSH cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including PVC box, modular cover plate with frame suitable for modular type switches, sockets, fan regulator etc complete all as specified and directed for the following :- (a). One light/Fan point controlled by one way switch 6 Amps 240 volts

All as per item no. 161 above but One 3 pin 6 Amps socket out let point on independent board complete all as speicified and directed.

All as per item no. 161 above but One 3 pin 6 Amps socket out let point on same board complete all as speicified and directed.

All as per item no. 161 above but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq mm size complete all as speicified and directed.

M&L for point wiring with 2.5 sq mm copper conductor FRLSH (multi-strand) PVC insulated ISI marked unsheathed cable Point and including surface, Non metallic rigid PVC casing capping double lock type ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unsheathed FRLSH cable size 2.5 sq mm copper conductor as earth wire to common earth dolly including PVC box, modular cover plate with frame suitable for 15 Amps socket and switch outlet power point independent circuit complete all as specified and directed.

M&L for securing loose wiring and repair to point wiring with necessary rigid non metallic PVC casing caping double lock type/ PVC conduit ISI marked of size not less than 25 mm inclusive all accessories etc complete all as directed

M&L for re-fixing the switch boards of any size / any module complete all as directed

S&F of PVC / polycarbonate lamp holders Angle type, complete all as specified and directed

S&F of modular step type fan regulator 120W, 2 module complete all as specified and directed

S&F of modular switch piano type 10 amps one way one module complete all as specified and directed

S&F of modular switch piano type 20 amps one way one module with neon indicator complete all as specified and directed

S&F of modular Socket, 6A-2/3 pin 2 module complete all as specified and directed

S&F of modular Socket, 6/16A-2/3 pin 2 module complete all as specified and directed

S&F of door bell AC 230 volts single phase, ding dong type complete all as specified and directed

S&F in replacement of 1x10 watt, 230V surface and wall mounted LED batten light fittings suitable for mirror light with polycarbonate housing and integrated electronic driver including connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

S&F in replacement of 18/20watt, 230V surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed. Make:- Luker LT5M20 / Havells ENDURALINEARNEOBS20WLED865SPCWH / Bajaj BCLAB 20W WH

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanized earth lead wire 4.0 mm dia of minimum 15m length by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete all as shown in electrical plate No 3 in SSR Part-I connected to earthing test point with and including provision of earthing lead protection pipe, PCC earth pit with cover, excavation & earth work, testing on completion etc complete all as specified and directed by Engr-in-Charge

A K ENTERPRISES (BID ID -3292048)

shiva traders (BID ID -3291257)

M/s.BAJRANG CONSTRUCTION (BID ID -3288583)