Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.3 LAccepted-AOC 20 A 2ND FLOOR BLOCK C RAJEEV NAGAR BEGUMPUR DELHI 110086 | NORTH WEST | DELHI | 110086 | L1 | Accepted-AOC Lowest BIdder | |
| 2 | L2₹30.6 L+₹30,850 (1.02%)Rejected-Finance | L2 | Rejected-Finance Other than Lowest | |
| 3 | L3₹31.0 L+₹73,350 (2.42%)Rejected-Finance | L3 | Rejected-Finance Other than Lowest | |
| 4 | L4₹31.2 L+₹93,450 (3.09%)Rejected-Finance | L4 | Rejected-Finance Other than Lowest | |
| 5 | L5₹33.5 L+₹3.2 L (10.5%)Rejected-Finance 2788 FOURTH FLOOR GALI RAJPUTANA ARYA PURA SABZI MANDI NEW DELHI KAMLA NAGAR NORTH DELHI DELHI 110007 UDYAM DL 01 0057966 | NORTH DELHI | DELHI | 110007 | L5 | Rejected-Finance Other than Lowest |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
17 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NASIRABAD
Garrison Engineer, Military Engineer Services, Nasirabad, Pin 305601
SMART PERIODICAL SERVICES TO CERTAIN BLDGS OF SOUTH AREA AT GE NASIRABAD
2023_MES_624297_1
8370/E8
Open Tender
Civil Works
Item Rate
335 days
GE Nasirabad
MES Contractor enlisted as Class D and above and category a i having deposited Standing Security of Rs 1,00,000.00 with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category.
6 documents required · 6 mandatory
₹500
Yes
GE NASIRABAD
₹90,000
Yes
30 Dec 2023
20 Oct 2023
20 Nov 2023
20 Oct 2023
17 Nov 2023
3 Nov 2023
20 Oct 2023 - 27 Oct 2023
Amount
NOTES FOR BoQ ITEM NO. 1.00 TO 5.00 below:- The following precautionary measures shall be ensured by the contractor before and during execution of the work. (i) All painting works and water proofing works shall be got executed through original materials manufacturing company or their authorised applicators as approved by GE and contractor should submitt MOU with the manufacturing company or their authorised applicators before execution of work and entire work shall be executed with the approved firm. (ii) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engr-in-Charge/ Office -in-charge of unit. (iii) The materials as required shall be issued to contractor by JE/ Engr-in-Charge on daily basis and the empty containers /bags shall be deposited in the store of Engr-in-Charge by the contrcator , for verification as per standard consumption/ coverage prescribed by the manufacturers. (iv) After completion of painting work contractor shall remove and clean all the droplets /stain of paint left on the floor, glasses and joinery. (v) OEM/authorised OEM applicator should give guaranttee of minimum 05 years and mentioned in MoU submitted to the department before commencement of work. (vi) Aurthorised applicator shall be of Make " Asian/ Berger/ Nerolac and all materials shall also be of similar make as approved by GE.
M&L for complete removal of existing treatment of old plastered surfaces of wall for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the new plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander having mechanical vacuum mechanism with RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps complete all as specified and directed:- (a) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. (b) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. (c) Allow 6-8 hrs time to dry the putty surface.
M&L for one coat of acrylic water based interior grade primer on wall surfaces @ 0.8 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subbsequent coats complete all as specified and directed.
M & L for Two coats of 1st quality acrylic distemper (ready mixed) on wall surface having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification, complete all as specified and directed.
M&L for one coat of acrylic water based exterior grade primer on wall surfaces @0.9 ltr(undiluted)/10 Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.
Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint on wall surfaces having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & ungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm, Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and directed. MAKE :- Apex Ultima Protek Asian paints/ Nerolac excel top guard / Berger
M&L for preparation of old decorated plastered or unplastered surfaces of wall including cornice etc and applying a coats of white wash complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of Ceiling and applying a coats of white wash complete all as specified and directed.
M & L for washing, rubbing down and stopping of old distempered surfaces of wall, removing nails, making good holes, cracks and applying one coat of oil bound distemper white or tinted complete all as specified and directed.
M & L for complete removal of existing treatment of old plastered surface of wall and applying two coats of oil bound distemper over a coat of 1mm thick putty (JK / Birla) complete all as specified and directed.
M & L for washing rubbing down and stopping of old painted surfaces, removing nails, making good holes, cracks etc and applying one coat of cement base paint complete all as specified and directed.
M & L for complete removal of existing treatment of old plastered surface of wall and two coats of cement base paint over a coat of primer complete all as specified and directed.
M & L for preparation of old wooden surface of any description over 10cm width or girth and applying one coats of synthetic enamel paint of Ist quality complete all as specified and directed.
M & L for preparation of old steel surface of any description over 10cm width or girth and applying one coats of synthetic enamel paint of Ist quality complete all as specified and directed.
M & L for preparation old treated or untreated concrete surface of width or girth exceeding 10cm and applying two coats of synthetic enamel paint of Ist quality over a coat of primer complete all as specified and directed
Material and labour for preparation of writing letter or figures(Block, Roman, italic or indian etc), any size and painting complete with synthetic enamel paint over a coat of primer of approved colour of n.exc 30 cm height with proper stencil cut etc complete all as specified & directed by Engineer-in-charge.
Taking down cement plastering of any description on brick / stone/ concrete wall / ceiling surfaces of any description incl racking out joints hacking for key, scrubbing down with water etc.
M&L for 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound @3% by weight of cement on fair faces of brick/stone work or concrete surfaces, finished even and smooth complete all as specified and directed. Note :- WPC measured and paid separately.
M&L for rendering in cement mortar (1:6), 15mm thick on other than fair faces of brick/stone masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed.
M&L for 5mm thick rendering in cement mortar in CM (1:3) on ceiling finished even and smooth without using extra cement, complete all as specified and directed.
M & L for rough cast plaster mix with crusted stone (6-10 mm), sand and cement in the ratio 1:1:1 , over 10mm thick rendering in CM 1:4 as in under coat including dubbing coat (if required) complete all as specified and directed.
M&L for preparation of newly/rough cast plastered wall surfaces and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.
M & L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty (JK / Birla) complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surface of ceiling and applying two coats of white wash complete all as specified & directed.
M/S Nexus Projects
JWALA ENTERPRISES
M/s K Prashad and Sons
M/s AKASH CONSTRUCTION CO.
J.K.CONSRUCTION
M/s Jai Jinendra Constructions
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .