WBPWDTE/AE/BESD-II/e-NIQ 03 of 2025-26

Amount

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.Make- Legrand/Schneider/ Seimens/ABB/L&T 2+10 way

Supplying and fixing 240/415 V Isolator on din rail of existing DBs and necessary connection. Make LEGRAND, ABB, SIEMENS, CRABTREE, SCHNIDRR,L&T as to GS. 240 V, 40A DP

Supplying and fixing 240/415V, MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection Make- Legrand, ABB, Siemens,Schneider as to GS. 6A - 32A SP MCB

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single corestranded 'FRLS' PVC insulated & unsheathed copper wire ( Finolex / Havells/ KEI / Gloster /approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), and drop Concealed type if reqd as per direction of EIC with 1x22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed copper wire for ECC, to light/ fan/ call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish Average run 9 mtr.

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish. On Board

Supply & Fixing 240 V, 2 x 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 200 x 150 x 65 mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supplying & Delivery of single LED tube light fittings (Make-Philps, Cat No.- TMC- 502 P 1xT- LED 22W/equlevent model of CG fittings IGP 161LT8 161xT8 with 01 nos. LED TUBE Philips Cat No.Mas LED Tube 1200MM 18W 865 T81-2100lm/Crompton Cat no.-LTB 20-865-(2) or equvelent model of Havells/Wipro)

Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling with HW block and ceiling plates, nipples etc. as required

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

S&F angular holder (Anchor) on 3" wooden double round block incl. S&F 9 Watt LED lamp (make Philips/ Wipro/ Bajaj)

Supply & delivary of AC 240V 50 Hz 48" sweep (1200 mm) ceiling fan complete with down rod , Canopy, fork incl S & F of P - 2 type capacitor as per IS1 Star specification & proper Manufacturer certificate of the capacitor and safety wire. (Supplied at the time of delivered the fans) etc. without reguleter, (Make- Usha 1200 MM Striker PWD BT1 STAR (Safety wire and 53 Capacitor ) Br/Orient electric- New Breeze (5yrs. wirenty), 1200MM Sweep 44W, 320rpm, 225 cmm, 3Star ac ceiling fan or equvelent model of Crompton Greaves and as per direction of EIC.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc.

Supply and delivery of 230V,50 Hz Heavy Duty Exhaust fan with all necessary accessories [Make: EPC , Usha, Heavy duty] 23 cm (9"), 40Watt, 1370 RPM

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 23 cm (9")

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long). For Al 23 cm Exhaust fan (9")

Distribution wiring in 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed copper wire (Finolex / Havells/ KEI / Gloster /approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required 2 x 84/0.3 (6sqmm) + 1 x 56/0.3 (4 sqmm)(for SPN DB)

2 x 56/0.3 (4sqmm) + 1 x 36/0.3 (2.5 sqmm)(for ac)

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) (for Separate Plug)

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. as per G S 6 sq mm

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages solid GI Wire. No. 6 SWG

SITC OF AC MACHIINE Supply & Delivery of 1.5/1.6 TR Hi-Wall Split Air Conditioner having following specification:- 1) Cooling capacity Nominal (BTU/HR): 20301 2) Minimum ISEER rating- 3.5, BEE leveling 3 star or more (2019-20) IS compliance - IS 1391 3) Refrigerant- R410A/R32 4) Compressor- Rotary/Scroll 5) Evaporator & Condensor Coil : Copper 6) Operating Outdoor Temparature = 50°C and above 7) Power Supply- 230 V, 50 HZ (Tolerance as per applicable standard) 8) Min Room Discharge Air Flow Rate- 1350 CMH 9) Cordless Remote Arrangement with all modernized provision of temperature setting, Fan speed option (Low/Medium/High) Auto Swing. (Make- O- General Cat no.- ASGA18BMWA-B (R32)/Mitsubishi Electric MS/MU-AGZ18VF/Mitsubishi heavy Industry)

Installation, testing and commissioning of 2.0 Tr. Split type AC both indoor / out door unit including S &F of 40x40x5 mm MS angle iron frame for installation of ODU and sealing of the holes in wall created during the copper pipe connection between IDU and ODU by proper send cement pluastering and painting (baoth inside and out side) to match up with the original finish mending good the damages to complete the iqnstin as per direction of EIC.

Supply and laying of 5/8" or 1/2" & 1/4" dia (Soft drawn) Cu pipes (As per standard) with tube thickness 0.6mm incl. 9mm thick nitrile rubber insulation, insulation tape,fastner etc. as necessary as per direction of EIC. Copper pipe Make Hitachi Ryoku/ Mandev/Rajco and Nitrile rubber installation Make:- Armacell/Accollex/K-flex)

S & Laying of 3 x 2.5 sqmm PVC insulated & unarmoured copper wire (make--Finolex/Havells/KEI) through 19 mm dia 3 mm thick pipe for 1.5/2 Tr. Split AC machine (extra length for distance of ODU & IDU exceed 3 mtr.) with max saddling with max 1 mtr distance as per direction of EIC.

S & F of flexible PVC high quality water carrying pipe of 25 mm dia/proper size for drainage the condensate water from already installed AC to any available (nearest) drain water pipe or near to ground level and the pipe must be properly saddled with the wall incl. proper insertion of the flexible pipe to drain water pipe and sealing the entry with required materials like PVC tape, High quality sealing the entry with required materials like PVC tape, high quality sealing gum etc. as reqd. All these arrangement for fixing must be arranged by the agency itself as per direction of EIC.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections.

Supplying and fixing of Timer DB (Connection in wall or surfaced as per the site Condition) 1) 230V, Upto 16 A capacity 24 Hrs Anolog Electromechanical Time switch (Make Lauritz Knudsen (L & T ) Cat No. AUTS03ANA00/Slemens/Schneider) 2) 2 pole power contractor (INT-MNX25-2P Cat No. CS90240/Siemens/ Schneider) 3) 20A SP MCB [Make Siemens/Schneider/Lauritz Knudsen (I & T) ] 4) 32A DP Isoleter [Make Siemens/Schneider/Lauritz Knudsen (I & T) ] 5) Toggle switch [Make Siemens/Schneider/Lauritz Knudsen (I & T) or icuvelent Make] 6) (2+12 way) SPNDP [Make Siemens/Schneider/Lauritz Knudsen (I & T) ] 7) Bakelite base with FP bolt type stud/ Terminal block incl. S & F neutral bar etc. with this box for termination of of power. 8) The complete arrangement must be wiring by 1/25/4/6 Sqmm. PVC insulated Cu.wire (Make-Gloster/Polycab/ Havells) with suitable length incl. socketing /lugs etc. as per requirment and direction of EIC [Make Siemens/Schneider/Lauritz Knudsen (I & T) / Legrand )

S & F 240V 25A OLP - 30 Electrronic motor starter in 175mm X 100mm X 65 mm depth 16 SWG MS Box coneled in wall with bakelite top cover incl. Necy. Conncetion as per direction of EIC for AC Machines.

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

UJJWAL MUKHERJEE (BID ID -6836558)

Karmakar electrical Repairing Works (BID ID -6836319)