Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.5 LAccepted-AOC 27 2ND FLOOR CITY CENTRE CLUB ROAD RANCHI 834001 JHARKHAND | RANCHI | JHARKHAND | 834001 | ₹26.5 L | L1 | Accepted-AOC Lowest quoted |
| 2 | L2₹29.7 L+₹3.2 L (12.2%)Rejected-Finance 202 VIDYA NAGAR BEHIND SANJAY GANDHI MEMORIAL COLLEGE KAMRE RANCHI JHARKHAND 835222 | RANCHI | JHARKHAND | 835222 | ₹29.7 L+₹3.2 L (12.2%) | L2 | Rejected-Finance Other than lowest quoted |
| 3 | L3₹30.2 L+₹3.7 L (13.9%)Rejected-Finance 17 NO TIKIA MAHAL ORDERLY BAZAR PO PS BARRACKPORE DIST 24 PGS KOLKATA 700120 WB | KOLKATA | 24 PGS | WB | 700120 | ₹30.2 L+₹3.7 L (13.9%) | L3 | Rejected-Finance Other than lowest quoted |
| Sl No | Description | Qty | Unit | M/s R S CONSTRUCTION L2 | Bihar traders L1 | B N ENTERPRISE L3 |
|---|---|---|---|---|---|---|
| 1.00M&L for removing of unserviceable/broken parts without damaging of other parts of chair wooden bottom, supply and fixing following new parts made out of 1st class hard wood teak/shisham as shown on drg and specified. (FD-285) | ||||||
| 1.01 | Rear leg of size 835x55x30mm. (FD-285) | 40 | Each | 45 ₹1,800 | 35 ₹1,400 Lowest | 72 ₹2,880 |
| 1.02 | Front leg of size 430x55x30mm.(FD-285) | 40 | Each | 45 ₹1,800 | 35 ₹1,400 Lowest | 40 ₹1,600 |
| 1.03 | Side/Front/Rear rails of size 445x65x30mm.(FD-285) | 100 | Each | 50 ₹5,000 | 30 ₹3,000 Lowest | 40 ₹4,000 |
| 1.04 | Back rest of size 405x50x15mm.(FD-285) | 40 | Each | 60 ₹2,400 | 30 ₹1,200 Lowest | 40 ₹1,600 |
| 1.05 | Stiffener of size 20 x 25mm (Side & Central one).(FD-285) | 100 | Each | 30 ₹3,000 | 30 ₹3,000 | 20 ₹2,000 Lowest |
| 1.06 | Triangular bracket of size 50x50x25mm machine cut of 1st class hard wood teak/shisham between legs and rails of Chair wooden bottom with machine screw.(FD-285) | 350 | Each | 20 ₹7,000 | 25 ₹8,750 | 4 ₹1,400 Lowest |
| 1.07 | Tightening of all parts/joints of whole Chair wooden bottom with bamboo pins.(FD-285) | 100 | Each | 35 ₹3,500 | 25 ₹2,500 | 7 ₹700 Lowest |
| 1.08 | Supply and fixing in replacement of seat of size 440 x 445mm x 6mm thick plywood BWR Gde as per IS:303 to seat of chair wooden bottom with machine screw complete all as specified in drg and as directed by the Engineer-in-Charge.(FD-285) (Make of Plywood:- Archidply(Gold)/ Centuryply(Sainik) / Greenply(Ecotech)/BTSP (Gold)/Samratply) | 100 | Each | 110 ₹11,000 | 95 ₹9,500 | 82 ₹8,200 Lowest |
| 1.09 | Material and labour for French polishing to chair wooden bottom after removing the old polish from emery paper & with grinder machine , prepare of whole wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface . Then after apply two coat of french polish to the whole wooden surface till glossy finish. | 100 | Each | 55 ₹5,500 | 25 ₹2,500 Lowest | 95 ₹9,500 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
27 Nov 2025, 6:00 pmClosed
Shri Manjul Kumar Tripathi, GE
Garrison Engineer Ranchi, 7th Club Road Ranchi, PIN-834001
REPAIR AND RECAINING OF VARIOUS CHAIRS AND REUPHOLSTERY OF SOFA SET AND REPAIR POLISHING OF WOODEN FURNITURE AT RANCHI AND JAMSHEDPUR UNDER GE RANCHI
2025_MES_729266_2
8300/520/E8
Open Tender
Civil Works
Item Rate
270 days
GE Ranchi
Class D Cat d (i)
6 documents required · 6 mandatory
₹500
GE Ranchi
₹90,000
Yes
30 Dec 2025
13 Nov 2025
4 Dec 2025
13 Nov 2025
27 Nov 2025
20 Nov 2025
Amount
M&L for removing of unserviceable/broken parts without damaging of other parts of chair wooden bottom, supply and fixing following new parts made out of 1st class hard wood teak/shisham as shown on drg and specified. (FD-285)
Rear leg of size 835x55x30mm. (FD-285)
Front leg of size 430x55x30mm.(FD-285)
Side/Front/Rear rails of size 445x65x30mm.(FD-285)
Back rest of size 405x50x15mm.(FD-285)
Stiffener of size 20 x 25mm (Side & Central one).(FD-285)
Triangular bracket of size 50x50x25mm machine cut of 1st class hard wood teak/shisham between legs and rails of Chair wooden bottom with machine screw.(FD-285)
Tightening of all parts/joints of whole Chair wooden bottom with bamboo pins.(FD-285)
Supply and fixing in replacement of seat of size 440 x 445mm x 6mm thick plywood BWR Gde as per IS:303 to seat of chair wooden bottom with machine screw complete all as specified in drg and as directed by the Engineer-in-Charge.(FD-285) (Make of Plywood:- Archidply(Gold)/ Centuryply(Sainik) / Greenply(Ecotech)/BTSP (Gold)/Samratply)
Material and labour for French polishing to chair wooden bottom after removing the old polish from emery paper & with grinder machine , prepare of whole wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface . Then after apply two coat of french polish to the whole wooden surface till glossy finish.
Supply & Fix nylon buffers with machine screw to legs of chair wooden bottom complete all as directed by Engineer-in-Charge. (FD-285)
M& L for Removing of unserviceable/broken parts without damaging to other parts of chair dining and supply and fix following new parts made out of 1st class hard wood teak/shisham as shown on drg and specified. (FD-279)
Rear leg of size 890x55x30mm. (FD-279)
Front leg of size 460x55x30mm.(FD-279)
Side/Front/Rear rails of size 440x65x30mm.(FD-279)
Back rest of size 405x45x15mm.(FD-279)
Stiffener of size 20x25mm (Side & Central one).(FD-279)
Supply and fixing with machine screw of triangular bracket of size 50x50x25mm machine cut of 1st class hard wood teak/shisham between legs and rails of Chair dining.(FD-279)
Tightening of all parts/joints of whole Chair dining with bamboo pins.(FD-279)
Material and labour for French polishing to chair dining after removing the old polish from emery paper & with grinder machine , prepare of whole wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface . Then after apply two coat of french polish to the whole wooden surface upto glossy finish.
Removing the old cane from chair dining and recanning with new half round 2mm wide plastic cane (Godrej/Gwalier pattern) and border with 3mm wide plastic cane. (Plastic cane shall be of white colour of Make: Shah/Premier/ BR Super) complete all as specified and as directed by the Engineer-in-Charge. (FD-279).
Supply & Fix nylon buffers with machine screw to legs of chair dining complete all as directed by Engineer-in-Charge. (FD-279)
M&L for removing of unserviceable/broken parts without damaging of other parts of chair writing and supply and fix following new parts made out of 1st class hard wood teak/shisham as shown on drg and specified. (FD-280)
Rear leg of size 890x55x30mm.(FD-280)
Front leg of size 680x55x30mm.(FD-280)
Side/Front/Rear rails of size 535 x 65x30mm.(FD-280)
Back rest of size 470x50x15mm.(FD-280)
Stiffener of size 20x25mm (Side & Central one).(FD-280)
Arms of size 520 x 60x25mm.(FD-280)
Supply and fixing with machine screw of triangular bracket of size 50x50x25mm machine cut of 1st class hard wood teak/shisham between legs and rails of Chair Writing.(FD-280)
Tightening of all parts/joints of whole Chair Writing with bamboo pins.(FD-280)
Material and labour for French polishing to chair writing after removing the old polish from emery paper & with grinder machine , prepare of whole wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface . Then after apply two coat of french polish to the whole wooden surface upto glossy finish.
Removing the old cane from chair writing and recanning with new half round 2mm wide plastic cane (Godrej/Gwalier pattern) and border with 3mm wide plastic cane. (Plastic cane shall be of white colour of Make: Shah/Premier/ BR Super) complete all as specified and as directed by the Engineer-in-Charge. (FD-280).
Supply & Fix nylon buffers with machine screw to legs of chair writing complete all as directed by Engineer-in-Charge. (FD-280)
M&L for removing of unserviceable/broken parts without damaging of other parts of chair easy and supply and fixing following new parts made out of 1st class hard wood teak/shisham as shown on drg and specified. (FD-229)
Front/Rear leg of size 545x55x25mm.(FD-229)
Front/Rear stiffener of size 510 x 50 x 25mm .(FD-229)
Arms of size 610 x 65x25mm.(FD-229)
Front & back rail of seat/back of size 510x50x25mm.(FD-229)
Side rail of seat/back of size 575 x 70 x 40mm .(FD-229)
Supply and fixing in replacement of seat frame with new seat frame to chair easy of 1st class hard wood teak/shisham made to shape and size complete all as specified and shown in drg and as directed by the Engineer-in-Charge.(FD-229)
Description all as per Srl. Item No. 4.06 here-in-before but back frame of chair easy.(FD-229)
Tightening of all parts/joints of entire Chair Easy with bamboo pins. (FD-229)
Supply and fixing with machine screw of triangular bracket of size 50x50x25mm of 1st class hard wood teak/shisham between legs and rails of Chair Easy.(FD-229)
Material and labour for French polishing to chair easy after removing the old polish from emery paper & with grinder machine , prepare of whole wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface . Then after apply two coat of french polish to the whole wooden surface upto glossy finish.
Removing the old cane from chair easy and recanning with new half round 2mm wide plastic cane (Godrej/Gwalier pattern) and border with 3mm wide plastic cane. (Plastic cane shall be of white colour of Make: Shah/Premier/ BR Super) complete all as specified and as directed by the Engineer-in-Charge. (FD-229).
Supply & Fix nylon buffers with machine screw to legs of chair easy complete all as directed by Engineer-in-Charge. (FD-229)
Removing of unserviceable/broken parts without damaging of other parts of chair dining cushioned and supply and fixing following new parts made out of 1st class hard wood teak/shisham as shown on drg and specified. (FD/MAP-II/04)
12mm thick MR Gde Plywood seat with cushion of size 450mm x 450mm with Tapestory cloth. Cushion/Foam shall be 75mm thick of 32 density, (Tapestory cloth shall not be less than Rs. 350/- per RM). (FD/MAP-II/04)
Front leg of size 450x50x35mm. (FD/MAP-II/04)
Rear leg of size 950x50x35mm. (FD/MAP-II/04)
Back Vertical stripps of size 550 x 30 x15mm.(FD/MAP-II/04)
Back rest of size 450x45x25mm.(FD/MAP-II/04)
Stiffener of size 25x20mm (Side & Central one).(FD/MAP-II/04)
Side and Front rails of seat of size 450x65x25mm. (FD/MAP-II/04)
Back Rail of seat of size 450x90x25mm. (FD/MAP-II/04)
Tightening of all parts/joints of entire Chair dining cushion with bamboo pins. (FD/MAP-II/04)
Supply and fixing with machine screw of triangular bracket of size 50x50x25mm of 1st class hard wood teak/shisham between legs and rails of Chair dining cushioned.(FD/MAP-II/04)
Material and labour for French polishing to chair dining cushion after removing the old polish from emery paper & with grinder machine , prepare of whole wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface . Then after apply two coat of french polish to the whole wooden surface upto glossy finish.
Supply & Fix nylon buffers with machine screw to legs of chair dining cushion complete all as directed by Engineer-in-Charge.
M & L for electric welding to broken old frame including preparation of surface of chair verandah and removing the unwanted welding spot all as directed by Engineer-in-Charge. (FD-359 & FD/MAP-II/06)
Supply and fixing in replacement of unserviceable portions of frame of Chair Verandah with 19mm conduit pipe of wall thickness 1.6mm duly electric welding complete all as directed by Engr-in-Charge. (FD-359 & FD/MAP-II/06)
Supply and fixing in replacement of unserviceable round MS bar between the front legs frame of Chair Verandah with new 10mm round MS bar duly electric welding complete all as directed by Engr-in-Charge. (FD-359 & FD/MAP-II/06)
M&L for taking down and removing the old cane /PVC seat and back from seat and back of Chair Verandah remove the old paint with emry paper and prepare the surface smooth of chair Verandah. Apply one coat synthetic enamel white paint on whole surface of Chair Verandah. Make - Asian , Burger, Nerolac.
recanning with new half round 4mm wide plastic cane in oval shape with mat pattern . (Plastic cane shall be of white/off white colour of Make: Shah/Premier/ BR Super) complete all as specified and as directed by the Engineer-in-Charge. (FD-359 & FD/MAP-II/06)
Supply & Fix nylon buffers with machine screw to legs of chair Verandah complete all as directed by Engineer-in-Charge.
Sofa Set 5/4 Seater (FD-258/281/373) M&L for removing of unserviceable/broken parts without damaging of other parts of Sofa set and supply and fix following new parts made out of 1st class hard wood teak as shown on drg and specified. (FD-258, 281 & 373)
Supply and fixing in replacement of front/rear leg of 1st class hard wood teak of Sofa set of single seater/3 seater all as specified and shown on drg.
Description all as per ser item No 7.01 here-in-before but arms.
Description all as per ser item No 7.01 here-in-before but side rails.
Description all as per ser item No 7.01 here-in-before but front & back rail of single seater sofa.
Description all as per ser item No 7.01 here-in-before but front/back rail of sofa three seater (long seat).
Supply and fixing in replacement of back cushion of Sofa Set of drg FD-258 size to made in shape as shown on drg and directed by Engr-in-Charge. The thickness of cushion shall be 50mm thick, 32 density and covered with new tapestory cloth. ( not less than Rs. 400/- per RM). The make of cushion shall be Sleepwell/Kurl-on/Coir-foam/Featherfoam.
Supply & fixing in replacement of 100mm thick flexipuff/U-Foam cushion of 32 density of Make:- Sleepwell/Cor-foam/ Kurl-on/Featherfoam, covered with new tapestory cloth (not less than Rs 400/- per running mtr) complete all as specified and directed by the Engineer-in- charge.
Material and labour for French polishing to Sofa Set Single seater after removing the old polish from emery paper & with grinder machine , prepare of whole wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface . Then after apply two coat of french polish to the whole wooden surface till glossy finish.
Material and labour for French polishing to Sofa Set Three seater after removing the old polish from emery paper & with grinder machine , prepare of whole wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface . Then after apply two coat of french polish to the whole wooden surface till glossy finish.
Bed Plywood Top (FD-246 & 247):- M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge. (FD-246 & 247)
Long rails of size 1980 x 90 x 35mm made of 1st class hard wood teak of bed plywood top.
Teak face venner ply wood 3mm thick for outer and inner sides of head board with teak wood beading half round alround of head rest of bed plywood top.
Description all as per ser item No 8.02 here-in-before but foot board.
Supply and fixing in replacement of legs of size 60x60x660mm made of 1st class hard wood teak/shisham of head board of bed plywood top.
Description all as per ser item No 8.04 here-in-before but legs of size 60 x 60 x 520mm of foot board of bed plywood top.
Supply and fixing of plywood MR Gde as per IS:303, AA Type of size 1980 x 900 x 12mm thick to bed plywood top with steel screw. (Make of Plywood:- Greenply/Archidply/Century Ply/BTSP (Gold)/ Samratply.
Supply and fixing in replacement of stiffners of size 60x40x900mm made of 1st class hard wood teak/shisham of bed ply top.
Supply and fixing in replacement of complete head rest with legs of bed plywood top shape and size as shown on drg.
Description all as per ser item No 8.08 here-in-before but foot rest of bed plywood top.
S & F of 1st class hard wood teak/shisham wooden bracket of size 100 x 100 x 35mm machine cut with steel screw between the long rail and legs of head board and foot board of bed plywood top.
M&L for applying french polishing with best quality french polish on exposed surfaces to bed plywood top (except top ply) till glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge. (FD-246 & 247)
Teapoy:- (FD-232 & 278) : M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge.
Supply and fixing in replacement of top of teapoy of size 600x450mm with new top made out of 18/19mm thick MR Gde plywood covered with 0.8mm thick laminated sheet of make:- Greenlam/Archidlam/ Centurylam / Samrat including 4mm thick teak wood beading alround all as shown on drg. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/Samratply.
Supply and fixing in replacement of legs of teapoy with new leg of size 60x30x520mm made of 1st class hard wood teak/shisham of size and shape as shown on drg.
Description all as per ser item No 9.02 here-in-before but long batten/rail of size 50x20x600mm & shape as per shown on drg.
Description all as per ser item No 9.02 here-in-before but short stiffener/rail of size 50x20x450mm and shape as per showon on drg.
S & F of 1st class hard wood teak/shisham wooden bracket machine cut of size 50 x 50 x 20mm with steel screw between the rail and legs of Teapoy with tightening of all parts of Teapoy.
M&L for applying french polishing with best quality french polish on exposed surfaces to teapoy till glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge. (FD-232 & 278)
Table Peg (FD-236 & 277) : M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge
Supply and fixing in replacement of top of table peg with new top of size 450x300mm new top made out of 18/19mm thick MR Gde plywood covered with 0.8mm thick laminated sheet of make:- Greenlam/ Archidlam / Centurylam/ Samrat including 4mm thick teak wood beading alround all as shown on drg of Table Peg. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/Samratply)
Supply and fixing in replacement of legs of peg table with new leg of size 50x30x360mm made of 1st class hard wood teak/shisham size & shape as shown on drg.
Description all as per ser item No 10.02 here-in-before but long batten/rail of size 40x20x450mm of table peg.
Description all as per ser item No 10.02 here-in-before but short rail/stiffener of size 40x20x300mm of table peg.
S & F of 1st class hard wood teak/shisham wooden bracket of size 50 x 50x20mm with steel screw between the rail and legs of Table Peg with tightening of all parts of Table Peg.
M&L for applying french polishing with best quality french polish on exposed surfaces to table peg till glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge. (FD-236 & 277)
Table Centre (FD-274) M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge
Supply and fixing in replacement of top of table Centre with new top of size 900 x 450mm new top made out of 18/19mm thick MR Gde plywood covered with 0.8mm thick laminated sheet of make:- Greenlam/ Archidlam/ Centurylam/ Samrat including 4mm thick teak wood beading alround all as shown on drg of Table Centre. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/Samratply).
Supply and fixing in replacement of legs of table centre with new leg of size 60x30x380mm made of 1st class hard wood teak/shisham as specified in drg.
Description all as per ser item No 11.02 here-in-before but long rail of size 50x20x900mm.
Description all as per ser item No 11.02 here-in-before but short rail/stiffener of size 50x20x450mm.
Supply & Fixing of 1st class hard wood teak/shisham wooden bracket machine cut of size 50x50x20mm with steel screw between the rail and legs of Table Centre with tightening of all parts of Table Centre.
M&L for applying french polishing with best quality french polish on exposed surfaces to table centre till glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge. (FD-274)
Table writing (FD-249 & 275) : M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge
Supply and fixing in replacement of top of table writing with new top of size 1145x600mm new top made out of 18/19mm thick MR Gde plywood covered with 0.8mm thick laminated sheet of make:- Greenlam/ Archidlam / Centurylam/ Samrat including 4mm thick teak wood beading alround all as shown on drg of Table Writing. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/Samratply).
Supply and fixing in replacement of legs of table writing with new leg of size 55x35x740mm made of 1st class hard wood teak/shisham all as specified on drg.
Description all as per ser item No 12.02 but long rails/stiffners (Centre) of size 50x25x 1145mm .
Description all as per ser item No 12.02 but side stiffener/rails of size 50x25x600mm .
S & F in replacement of drawers with new drawers made of 18/19mm thick MR Gde plywood with 0.8mm thick laminated sheetof make:- Greenlam/Archidlam/ Centurylam/ Samrat including 4mm thick teak wood beading alround on front of drawer side, 12mm thick of sides of drawer including with 6 mm thick MR Gde Plywood to bottom of drawers including aluminium anodised knob and all as shown on drg of table writing. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/Samratply).
S & F in replacement of entire cup board of table writing made of 18/19mm thick MR Gde plywood covered with 0.8mm thick laminated sheet of make:- Greenlam/Archidlam/ Centurylam/ Samrat including 4mm thick teak wood beading alround alround including wall catcher size and shape all as shown on drg of Table Writing. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/Samratply).
Description all as per ser item No 12.06 but door shutter of cupboard.
S & F of 1st class hard wood teak/shisham wooden bracket machine cut of size 75 x 75x35mm with steel screw between the rail and legs of Table Writing with tightening of all parts of Table Writing.
M&L for applying french polishing with best quality french polish on exposed surfaces to table writing till glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge. (FD-249 & FD-275)
Table 900x600x760mm with/without drawer (FD-224 & 284) : M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge
Supply and fixing in replacement of top of table 900x600mm with drawer /without drawer made of 18/19mm thick MR Gde plywood covered with 0.8mm thick laminated sheet of make:- Greenlam/Archidlam/ Centurylam/ Samrat including 4mm thick teak wood beading alround alround to top to table with or without drawers, size and shape all as shown on drg. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/Samratply).
Supply and fixing in replacement of legs made of 1st class hard wood teak/shisham of size 60x30x740mm all as specified on drg.
Description all as per ser item No 13.02 but stiffner (centre one) of size 60x20x900mm .
Description all as per ser item No 13.02 but side stiffner of size 60x20x600mm.
Description all as per ser item No 13.02 but long rails of size 60x20x900mm .
Description all as per ser item No 13.02 but short rails of size 60x20x600mm .
S & F in replacement of drawers with new drawers made of 18/19mm thick MR Gde plywood with 0.8mm thick laminated sheetof make:- Greenlam/Archidlam/ Centurylam/ Samrat including 4mm thick teak wood beading alround on front of drawer side, 12mm thick of sides of drawer including with 6 mm thick MR Gde Plywood to bottom of drawers including aluminium anodised knob and all as shown on drg of table 900x600x760mm with drawer. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/Samratply).
S & F of 1st class hard wood teak/shisham wooden bracket machine cut of size 75 x 75x20mm with steel screw between the rail and legs of Table 900x600x760mm with/without drawer with tightening of all parts of Table.
M&L for applying french polishing with best quality french polish on exposed surfaces to table with/ without drawer till glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge. (FD-224 & FD-284)
Table dining 6/8 persons (FD-273 ,376 & FD MAP -II/03) : M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge
Supply and fixing in replacement of top of table dining 6 person of size 1500x900mm made of 18/19mm thick MR Gde plywood covered with 0.8mm thick laminated sheet of make:- Greenlam/Archidlam/ Centurylam/ Samrat including 4mm thick teak wood beading alround to top to table dining 6 persons, rest all as specified on drg. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/Samratply).
Description all as per ser item No 14.01 but top of Table dining 8 persons of size 1800x900mm.
Replacement of legs of table dinning 6/8 persons with new legs of size 75x40x740mm made of 1st class hard wood teak/shisham, all as specified on drg.
Description all as per ser item No 14.03 but long rails of size 1500x100x25mm thick size and shape all as shown on drg.
Description all as per ser item No 14.03 but long rails of size 1800x100x25mm thick for 8 persons.
Description all as per ser item No 14.03 but side rails of size 900x100x25mm thick for 6/8 persons.
Description all as per ser item No 14.03 but wooden bracket machine cut of size 100x100x25mm for table 6/8 persons.
Material and labour forapplying french polishing with best quality french polish on exposed surfaces to table dining 6/8 persons upto glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge. (FD-273 ,376 & FD MAP -II/03)
Table dining 4 persons 1200 X 900X 760MM (FD/MAP -II/03) : M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge
Supply and fixing in replacement of top of table dining 4 person of size 1200x900mm made of 18/19mm thick MR Gde plywood covered with 0.8mm thick laminated sheet of make:- Greenlam/Archidlam/ Centurylam/ Samrat including 4mm thick teak wood beading alround to top to table dining 6 persons, size and shape all as shown on drg. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/Samratply).
Replacement of legs of table dinning 4 persons with new legs of size 90X45X740 mm made of 1st class hard wood teak/shisham, size and shape all as shown on drg.
Description all as per ser item No 15.02 but long rails of size 900x90x45mm
Description all as per ser item No 15.02 but side rails of size 900x90x45mm
Description all as per ser item No 15.02 but the stiffeners of size 900x90x25mm
Description all as per ser item No 15.02 but wooden bracket machine cut of size 100x100x25mm .
M&L for french polishing with best quality french polish on exposed surfaces to table dining 4 persons upto glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge. (FD/MAP -II/03)
M/s R S CONSTRUCTION (BID ID -3481991)
B N ENTERPRISE (BID ID -3492569)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.11 MB
BOQ_828246.xls
BOQ • 0.35 MB
Tender_520.pdf
Tender Documents • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .