REP MAINT OF CEILING FAN EXHAUST FAN WALL MTD FAN ELECT GEYRS REP TO FENCING DRAIN BDRY WALL ETC MISC BR WKS REP MAINT TO REFRIGERATION AND AC EQPT WATER COOLER INST AT MH NAMKUM AND VARIOUS UNIT AT NAMKUM KHOJATOLI AND LPH AREA UNDER GE RANCHI

Amount

Disconnecting and taking down the complete ceiling fan from ceiling hook/bolts/fan box any size/make/sweep from any OTM of technical Area and refixing after repairs/replacement of various component of ceiling fan and reassemblings,refixing and Testing complete.(Repair/replacement of various component of ceiling fan shall be measured and paid seperately against respective items). Note - (i) The cost of replacement of unserviceable mild steel screws, nut bolt and washers cleaning of blades/down rod and body of ceiling fan greasing, oiling of bearing/bushes is included in the quoted rate against this item.(ii) All type repair work to be done in E/M yard at Mes Power house and to be tested.

Supply and Fixing Ball bearing suitable for 1200/1400 mm sweep ceiling fan of ball bearing N0 6201/6202/6203 complete all as specified and directed.

Supply and fixing for replacement of bush made out of stainless steel approved make for Ceilling fan any sweep/size/model complete all as specified

Supply and fixing for replacement of hanging clamp (hanger) with nut/bolt and rubber bush suitable for mounting/hanging of ceiling fan any type/any size all as specified and directed.

Supply and fixing in replacement of sefty split pins of down rod of suitable size for any sweep make model of ceiling fans complete all as specified'

Material ans labour replacement of MS down rod of length 250 mm long (down rod) both end screwed , in length as required duly painted with white synthetic enamel paint suitable for any make/ size/sweep of ceiling fan all as specified and as directed.

Supply and fixing for replacement of capacitor 2.15/2.5 mfd for ceiling fans of any make /model/sweep, complete all as specified and directed .

Supply and fixing for scraping all foreign materials with emery paper, cleaning the body, blades and down rod (preparatory work) for painting ceiling fan with one coat of supper enameled white paint (spray paint) and writing of MES No. with capital letter of size 20 mm height and 03 mm width with synthetic enameled black paint all as directed.

Supply and fixing fan blade set (set of three) made out of MS iron sutaible for 1200 mm sweep ceiling fan, as per exisitng size and guage all directed by Engr-in-charge

Supply and fixing in repair bottom cover suitable for 1200/1400 mm sweep of any make as required at site & directed by engr- in charge.

Supply and fixing in repair top cover suitable for 1200/1400 mm sweep of any make as required at site & directed by engr- in charge.

Supply & fix PVC canopy of 1200/1400 mm sweep ceiling fan any make.

Supply and fixing in repair stator suitable for 1200/1400 mm sweep of any make as required at site & directed by engr- in charge.

Supply and fixing in repair the ceiling fan 1200 mm sweep, 230 Volts , 50 Hz (5 star BLDC type ) with all fitting and all accessories complete all specififed and directed. Note: The Old u/s ceiling fan to be deposited to E/M yard.

Supply and fixing in repair the wall mounted fan Sweep 450 mm ,230 Volts , 50 Hz oscillation,propeller type blades with all fitting and all accessories complete all specififed and directed.

Disconnecting and taking down the complete Exhaust fan with bracket any size/any type form any OTM of technical area and refixing after repairs/replacement of various component of Exhuast fan and reassemblings,refixing and Testing complete.(Repair/replacement of various component of Exhaust fan shall be measured and paid seperately against respective items). Note -(i) The cost of replacement of unserviceable mild steel screws, nut bolt and washers cleaning of blades/down rod and greasing, oiling of bearing/bushes is included in the quoted rate against thisitem.(ii) Material and labour for rewinding shall be measured and paid. (iii) All type winding work to be done in E/M yard at Mes Power house and same to be tested.

Material and labour for copper winded motor suitable for exhaust fan 230 mm to 300 mm sweep and taking out the old burnt motor complete all as directed by Engr-in-charge. (i) All type copper winded motor to be done in E/M yard at Mes Power house and to be tested complete

Material and labour for copper winded motor suitable for exhaust fan 450 mm sweep and taking out the old burnt motor complete all as directed by Engr-in-charge. (i) All type copper winded motor to be done in E/M yard at Mes Power house and to be tested complete.

Supply and fixing for replacement of capacitor 3.15 mfd for Exhaust fans of any make /model/sweep, complete all as specified and directed .

Supply and fixing for replacement of capacitor 4 mfd for Exhaust fans of any make /model/sweep, complete all as specified and directed .

Supply and fixing for replacement of blade assembly suitable for exhaust fan of same size make/model for 230 to 300 mm sweep single phase 230 volt completed all as directed by the Engr-in-Charge and as specified.

Supply and fixing for replacement of blade assembly suitable for exhaust fan of same size make/model for 450 mm sweep single phase 230 volt completed all as directed .

Supply and fixing for replacement of gun metal bush of approved make for exhaust fan any sweep/size/model complete all as specified

Supply and fixing for replacement of rubber pad sutaible for mounting exhaust fan any size complete all as specified

Supply and fixing for replacement of mounting brackets with nuts and bolts 230/300 mm size for exhaust fan of any make/size complete all as specified and as directed.

Supply and fixing for replacement of mounting brackets with nuts and bolts 450 mm for exhaust fan of any make/size complete all as specified and as directed.

Supply and fixing in repair the Exhaust fan 230 mm steel body 230 Volts , 50 Hz upto maximum speed 1200 RPM with all fitting and all accessories complete all specififed and directed. Note: The Old u/s exhaust fan to be deposited to E/M yard.

Taking down carefully electric storage type water heater (Geysers) of any make and any capacity from its mounting place opening for inspection compete including back plate, heating element, inner copper tank etc, de-scaling back plate and heating element by cleaning with Sulfuric acid/ de-scaling compound and re-assembling of Geysers after repairs carrying out and re-fixing in same position (Replaced items such as spares measured and paid separately under relevent items) including making good to disturbed portin of walls with CM (1:3) or PCC (1:2:4 Type B1) and plastering the wall surfaces with CM 1:6 and replacement of old nuts, bolts and rubber gasket etc, complete all as specified and as directed by the Engineer-in Charge. Note (1) Any type of rubber gasket , rubber washer, screws , insulating tape required shall be deemed to be included in the quoted rate. Note (2) The descaling / cleaning the inner tank including denting and brazing the leakage joints / points till the leakage stops including carrying out minor repair of outer body surface, bottom and top cover complete all as specified and as directed by Engineer-in-charge and shall be deemed into the quoted rate and nothing shall be paid to any extra amount. Note (3) The cleaning of all type dust, stains and painting of geysers with one coat of synthatic enamemel paint by spraying and refixing properly in the same location complete all as specified and directed by Engineer-in-Charge and nothing shall be paid to any extra amount.

S&F in repair/replacement 2.0 KW capacity Heating Element, Push/ Screw type with round/triangle mechanism and facilitate to fixing/holding of thermostate 'O' Ring type' including making electrical connection complete all as specified and as directed by Engineer-in-Charge.

S&F in repair/replacement 1.5 KW capacity Heating Element, Push/ Screw type round/triangle mechanism and facilitate to fixing/holding of thermostate with 'O' Ring type' including making electrical connection complete all as specified and as directed by Engineer-in-Charge.

S&F in repair/ replacement for Thermostat/autocut switches for geysers 25/ 50 Ltr capacity including making connection complete all as directed by Engineer-in-Charge.

S&F in repair/replacement PVC connection heavy duty with brass/PTMT nuts of requered length not exceeding 450 mm with rubber & PVC washer suitable for 15 mm bore GI pipe complete for cold water all as specified and directed by Engineer-in-Charge.

S&F in repair/replacement hot water outlet connection made of brass chromium plated with Union rubber washer suitable for 15 mm bore GI pipe for hot water all as specified and directed by Engineer-in-Charge.

Supply and fix in repair/replacement wall mounted vertical electric water heater storage type 25 litrs capacity, easy to install/maintence friendly, single phase 230 volt AC, energy efticient minimum 5 star rating, rust free ABS body and single welded inner tank coated with corrosion resistant insulated material pressure rating 8 bar, complete with adjestable thromostate & pressure relief valve and other sefety feature to protect against high temprature, pressure, dry heating, thermal auto cut off/on functional and electric shock etc all as specified. Make : Havells/ Racold/ Usha Lexus Note:- The old unserviceable geyser to be deposited to EM yard.

S&F for repair/replacement of Geyser assembly complete with brazing of barss tube stud, nut bolts and copper tank for a length not exc 5.0 cm in each geyser.

S&F in repair/replacement of neuprene rubber gasket for apparatus plate of inner tank assembly for any make /specifecation of electrical storage type water heater complete all as directed.

S&F in repair/replacement bottom cover made of MS sheet 18 SWG duly painted with two coats of super enamel paint by spray painting suitable for 25 Ltrs geysers complete all as specified and as directed by Engineer-in-charge.

S&F in repair/replacement bottom cover made of MS sheet 18 SWG duly painted with two coats of super enamel paint by spray painting suitable for 50 Ltrs geysers complete all as specified and as directed by Engineer-in-charge.

S&F in repair/replacement top cover made of MS sheet 18 SWG duly painted with two coats of super enamel paint by spray painting suitable for 25 Ltrs geysers complete all as specified and as directed by Engineer-in-charge.

S&F in repair/replacement top cover made of MS sheet 18 SWG duly painted with two coats of super enamel paint by spray painting suitable for 50 Ltrs geysers complete all as specified and as directed by Engineer-in-charge.

S&F in repair/replacement of outer body fabricated of 1.6 mm MS Sheet for geysers of 25 Ltrs capacity duly painted with spray point with clamps 02 Nos of with necessary nut bolts complete all as specified and as directed by Engineer-in-charge.

S&F in repair/replacement of outer body fabricated of 1.6 mm MS Sheet for geysers of 50 Ltrs capacity duly painted with spray point with clamps 02 Nos of with necessary nut bolts complete all as specified and as directed by Engineer-in-charge.

S&F in repair/replacement heavy duty stainless steel inner tank suitable for 25 Ltrs capacity of geyser having high pressure bearing capacity including taking down existing copper / steel inner tank complete all as specified and as directed by Engineer-in-charge.

S&F in repair/replacement heavy duty stainless steel inner tank suitable for 50 Ltrs capacity of geyser having high pressure bearing capacity including taking down existing copper / steel inner tank complete all as specified and as directed by Engineer-in-charge.

S&F in repair/replacement of inner assembly comprising of inlet and outler brass tubes to make syphon inner tank complete with base plate and necessary hardwares suitable for geyer of capacity 25 Ltr of any description/specification complete all as directed.

S&F in repair/replacement of inner assembly comprising of inlet and outler brass tubes to make syphon inner tank complete with base plate and necessary hardwares suitable for geyer of capacity 50 Ltr of any description/specification complete all as directed.

Supply and fix in repair/replacement wall mounted vertical electric water heater storage type 50 litrs capacity, easy to install/maintence friendly, single phase 230 volt AC, energy efticient minimum 5 star rating, rust free ABS body and single welded inner tank coated with corrosion resistant insulated material pressure rating 8 bar, complete with adjestable thromostate & pressure relief valve and other sefety feature to protect against high temprature, pressure, dry heating, thermal auto cut off/on functional and electric shock etc all as specified. Note:- The old unserviceable geyser to be deposited to EM yard.

S&F in repair/replacement of indicator lamp round /rectangular and making electric connections (Red/Green) 220 Volts AC as per site requirement suitable for geysers complete all as directed by Engineer-in-Charge.

S&F in repair/replacement of non return valve to geyser of 15 mm dia.

S&F switch socket combinations 3 pin 15 Amp, piano type.

S&F in repair/replacement plug top 3 Pin 15 Amps 240 Volts complete all as specififed and directed by Engineer-in-Charge

S&F in repair/replacement of industrial type MCB SP type metal clad plug and socket outlet comprising of MCB SP 16 Amp and making necessary electrical connection, complete all as specified and directed.

S&F in repair/replacement 2.5 Sqmm 3 core PVC insulated sheathed stranded copper wire complete all as specified and directed by Engineer-in-Charge.

S&F in repair/replacement for stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwd both ends iron pipe or for union and fixed of 15 mm dia.

M & L for Painting the outer surface of geyser after removing old paint and making surfaces smooth for repainting with two coats of synthetic super enamelled paint same tint as of original all as required at site upto 25/50 Ltrs capacity over one coat of primer by spray gun after scraping the existing paint , denting , filling depression wity putty etc and refixing the geyser in position including water/electric connection and testing complete all as specified and directed by Engr-in charge.

S&F in repair/replacement safety valve spring locked type with inlet coupling all as specified and directed by Engineer-in-Charge.

S & F in repair/replacement of fusible plug for suitable capacity of geysers complete all as specified and directed by Engineer-in-Charge.

M&L for GI pipe 15 mm bore medium grade complete with all fittings like bend, elbows, sockets, union, tees, nipple/long thread etc all as directed.

Taking out split type air conditioners indoor and out door units complete for repair/ servicing and overhauling of capacity 1.5/2.0 TR of any make/type after disconnecting refrigerant pipes, drain pipe and electric connection, removing dust by using blower and cleaning the condenser coils and components by using water and caustic soda/cleaning chemical agents, checking and replacing the spares like relay, capacitors, thermostat, fan motor, blades & blower etc and also connecting of refrigerant pipe, drain pipe and charging of refrigerant gas and testing including fixing back in its original location complete all as specified and directed. Note :- (i) Spares will be measured and paid separately (ii) Refrigerant gas will be measured and paid separately.

M & L for hermetically sealed compressor of split type air conditioner of 1.5 TR capacity including initial filling of refrigerant gas to the required pressure and testing and also removing old unserviceable compressor complete all as specified and directed. Make : Voltas/Hitachi/Tecumseh/Kirloskar/LG/Blue Star

Description all as per ser item No 60 above here-in-before but 2.0 TR.

Supply and fix MS wall bracket suitable for fixing of out door unit of split type Air Conditioner with necessary nuts, bolts & washers and removing old unserviceable items and making good disturbed surfaces to match with the existing complete all as specified and directed Make:- as per sample

M & L for leak testing the complete gas circulating system with dry nitrogen & evacuate and rectifying/arresting leakage by cutting, soldering,flaring work with nut, jointing of refrigerant tubing and charging of refrigerant gas to the required pressure in split type air conditioner upto 2 TR capacity and testing complete all as specified and directed Note:- Refrigerant will be measured and paid separately.

Supply and charging refrigerant gas (R-134a ) suitable for Refrigerators/water coolers and Deep freezers complete all as specified and directed. Make: Mafron or equivalent makes as approved by the GE. Note :- Charging of refrigerant shall be measured and paid separately

Supply and charging refrigerant gas (R-22 ) suitable for split type AC complete all as specified and directed. Make: Mafron or equivalent makes as approved by the GE. Note :- Charging of refrigerant shall be measured and paid separately

Supply only relay assembly suitable for split type air conditioner 1.5/2.0 TR capacity complete all as specified and directed. Make:- As per sample

Supply only fan motor with blade suitable for out door unit of split type air conditioner up to 2 TR capacity complete all as specified and directed. Make:- As per sample

Supply only contactor suitable for split type air condtioners upto 2 ton capacity complete all as specified and directed. LG/Samsung/Carrier/Blue star/Hitachi

Taking down the unserviceable IDU blower motor and supply and fix IDU blower motor capacity as per existing make all as directed for 1.5 / 2 TR split AC.

Supply only starting capacitor 80 to 100 mfd for split type air conditioners complete all as specified and directed. Make : Concap/Keltron/Asian/Tesla/sarda/ Siemens/Tibcon

Supply only running capacitor 50 -60 mfd for split type air conditioners complete all as specified and directed. Make : Concap/ Keltron/Asian /Tesla/ sarda/ Siemens / Tibcon

Supply only universal strainer air filters cum dryer suitable for Split Air conditioners of capacity up to 2 TR complete all as specified and directed Make:- As per sample

Taking down sensor unit PCB board from indoor unit of split type AC of 1.5/2.0 TR capacity and checking the electronic circuit and rectifying the defects by replacing the defective components with new ones and testing complete all as specified and directed.

Removing the old unserviceable swing motor of any type and supply and fix new swing motor of 1.5/2.0 TR capacity split type ACs complete all as specified and directed.Make:- As per sample

Taking down perished unserviceable insulation cover of refrigerent piping and supply and fix thermo rexine tape including brutile rubber insulation for refrigerent pipings of suitable size.

Material and labour for 20 mm Low density polyethylene pipes (LDPE) of pressure 6kgf/sqcm fixed complete on walls, ceilings including all accessories complete. (Drain pipe )

Taking out the old unserviceable capillary tube 0.064 inch and supply and fix new capillary tube with strainer for the split type ACs 1.5/2 TR capacity complete all as specified and directed.

Disconnecting and taking out the old unserviceable copper tubing and supply and fix copper tube of size 3/8"/5/8"/1/4"/1/2" dia including necessary soldering, flaring work and jointing testing complete all as directed

Supply only new hand remote control of existing make suitable for 1.5/2 TR split type AC including 2 Nos batteries of suitable size and testing complete all as specified and directed

Dismantling indoor and outdoor units of split type air conditioner of any capacity after pumping down the gas,disconnecting electric connections without any damage to existing system, reinstalling of indoor and outdoor units in new locations complete with brackets and civil works (making holes in wall) as required, assembling of indoor & outdoor units including connection of suction and discharge pipes and testing etc with topping up refrigerant gas as required to maintain the pressure complete all as specified and directed.

Removing old unserviceable condenser coil assembly from split type air conditioner upto 2 TR capacity supply and fix copper condenser coil assembly with all accessories suitable to existing make/type and testing complete all as specified and directed.

Removing old unserviceable cooling coil assembly from split type air conditioner upto 2 TR capacity supply and fix copper cooling coil assembly with all accessories suitable to existing make/type and testing complete all as specified and directed.

Removing old unserviceable 2-3 way refrigerant control valve from split air conditioner outdoor unit after evacuating of refrigrant gas and supply and fix 2-3 way valve suitable for split type ACs of capacity upto 2 TR and testing complete all as specified and directed.

Taking out water cooler for servicing and leak testing the complete gas circulating system with dry nitrogen & evacuate and rectifying/arresting leakage by cutting, soldering, jointing of refrigerant tubing of 40 ltr to 150 ltr capacity of any make/type after disconnecting of electric connection, removing dust by using blower and cleaning all the components by using water and caustic soda, checking and replacing the spares like relay, capacitors,gasket, thermostat, PVC pipes, push cock/liftcock, float valves etc and charging of refrigerant gas if required including testing and fixing back in its original location complete all as specified and directed.

Supply and fix hermetically sealed compressor for water cooler 40/80 litres capacity including initial filling of refrigerant gas to the required pressure and testing, also including removing the old unserviceable compressor complete all as specified and directed. Make: Voltas/Blue Star/Tecumseh/Kirloskar/Usha

Description all as per ser item No 85 above but for 120/150 litre capacity.

Supply only capacitor 10-20 mfd complete all as specified and directed. Make: Asian/ KEL/Epcos

Supply only fan motor with blade ,single phase, 230V,50Hz for water coolers up to 150 Ltrs capacity complete all as specified and directed. Make : Usha/ AUE /Siemens/Keltron or equivalent any make with ISI marked.

Supply only relay assembly suitable for water coolers capacity complete all as specified and directed.

Supply only thermostat switch for water coolers any type/ make complete all as specified and directed. Make: INDOFOSS/ RANUTRAL/AUE/Danfos

Taking out walk in cooler for servicing and leak testing the complete gas circulating system with dry nitrogen & evacuate and rectifying/arresting leakage by cutting, soldering, jointing of refrigerant tubing of 10000 BTU capacity of any make/type after disconnecting of electric connection, removing dust by using blower and cleaning all the components by using water and caustic soda, checking and replacing the spares like relay, capacitors,gasket, thermostat, PVC pipes, push cock/liftcock, float valves etc and charging of refrigerant gas if required including testing and fixing back in its original location complete all as specified and directed.

Taking out Refrigerator for servicing and overhauling of capacity up to 345 ltr (single door/Double door type) of any make/type after disconnecting of electric connection and cleaning all the components, checking and replacing the spare parts like relay, capacitors, thermostat,fused bulb and also including carrying out servicing, oiling, greasing and charging of refrigerant gas and testing complete all as specified and directed. Note :- (i) Spares will be measured and paid separately . (ii) Refrigerant gas will be measured and paid separately..

Supply and fix hermetically sealed compressor of Refrigerator up to 180 litres capacity including initial filling of refrigerant gas to the required pressure and testing and also removing old unserviceable compressor complete all as specified and directed. Make: Voltas/Kelvinator/Tecumseh/Kirloskar/Usha/ Godrej

Description all as per ser item No 93 above but for Refrigerator up to 345 litres capacity.

Supply only relay assembly suitable for refrigerators of any type/ capacity up to 345 litres complete all as specified and directed. Make : Sarda/Annapurna/LG/Videocon/Whirlpool

Supply only bi-metal switch for refrigerators of any type/ capacity up to 345 litres complete all as specified and directed. Make:- LG/samsung/Videocon/Godrej/ Whirlpool

Supply only condensor coil suitable for refrigerators of any type/ capacity up to 345 litres complete all as specified and directed.

Supply only cooling coil suitable for refrigerators of any type/ capacity up to 345 litres complete all as specified and directed.

Supply only fan motor with blade suitable for refrigerators of any type/ capacity up to 345 litres complete all as specified and directed. Make : Samsung/Godrej/LG/Videocon/Whirlpool

Supply only thermostat switch for refrigerators of any capacity/ any type/ make complete all as specified and directed. Make: INDOFOSS/ RANUTRAL/Annapurna

Removing old unserviceable capilary copper tube of size 0.031" (Inch) and supply and fix new capilary copper tube suitable for existing type/make/size complete all as specified and directed.

M & L for acrylic plastic chiller tray's such as suitable for Vegitable,side fixing tray's,ice cube tray's etc.,complete all as specified and directed. Make:- As per sample

Removing old unserviceable bulb from refrigerator and supply & fix new bulb suitable for existing type/make/capacity/size complete all as specified and directed Make:- As per sample

Taking down old unserviceable PCB board with electronic circuit from refrigerator of any capacity/type and supply & fix new PCB board including electronic circuit complete all as specified and directed. Make:- As per sample

Taking out deep freezers to workshop for servicing of capacity up to 500 Ltr of any make and any type by replacing unserviceable compressor and other parts from the machine as directed including charging of Refrigerant gas after vacumising and making system leak proof by leak testing with dry nitrogen,brazing the suction / discharge tubes where required,cleaning of condensing unit to achieve proper cooling effect,checking of electronic circuit of machine and service where necessary by replacing electronic parts and replacing the wirings with proper size of PVC insulated wires complete all as directed and testing complete.

Supply only Thermostatic switch suitable for Deep freezer of capacity up to 500 Ltr (Make : Indfos/ Denfoss/ Ranutal/Annapurna

Supply only Relay suitable for Deep freezer of capacity up to 500 Ltr. Make: As per samle

Supply and fix Fan Motor with blade, single phase,230V AC 50 Hz for Deep Freezer of any make and capacity up to 500 Ltr. Make: As per samle

Supply and fix hermetically sealed compressor for deep freezer up to 500 Ltr capacity including initial filling of refrigerant gas to the required pressure and testing, also including removing the old unserviceable compressor complete all as specified and directed. Make: Voltas/Blue Star/Tecumseh/Kirloskar/Usha

Demolition of brick work build in cement mortar including all quoins, arches, pillars, complete.

M&L brick work with sub class 'B' brick straight or curved on plan exc 6m means radius build in cement mortar 1:6

Description all as per ser item No 111 above but except bricks

M&L brick work with sub class 'B' brick straight or curved on plan exc 6 metres radius with old size bricks built in cement mortar (1:4) complete.

Taking down cement plaster on wall of any description incl racking out joints hacking for key and scrubbing down with water complete.

M&L rendering 15mm thick cement mortar (1:4) on fair faces of brick or concrete surfaces and finished even and fair without using extra cement.

M&L 15mm thick rendering on fair faces of bk /concrete surfaces in cm (1:6), finished even and fair (Without using extra cement ) complete

Demoliton of cement concrete in ground floor paving n exc 15cm thickness ( below or above ground level ) complete.

M&L Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base etc complete

M&L PCC (1:2:4) type B1 using 20mm graded stone aggregate in coping etc, including weathering slightly rounded champers angle forming channels & form work

M&L 100mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in plinth/Hard standing/pathetc complete all as specified and directed.

Forming 12mm thick width and 100mm deep Expansion joints filied with bitumen mastic filling comprising of one part of heated bitumen 80/100 grade or VG-10 and three part of sand (all by weight) complete all as specified and directed.

M & L PCC type C-1 1:3:6 (20 mm graded agg) in suface channel in drain complete

M&L forming fair finished drain or channel, 30 cm inner girth, cement concrete finished even and smooth, using extra cement including forms moulds etc.

Add/Deduct for each 25 mm girth or part thereof over or under 30 cm girth complete

M & L 40 mm thick PCC type B - 1 1:2:4 using 20 mm graded stone aggregate as in flooring finish even & smooth using extra cement complete all as spd.

Supply only 38mm wide glass dividing strips, 3mm thick complete.

M & L for 75 mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection,Path,etc including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3.

M&L for antifungal Chequered cement concrete tiles 30cm x 30cm x 22 to 25mm thick with grey cement and pigment over & including 20mm thick screed bed in CM 1:6, set, jointed and pointed in neat cement slurry in floors complete.

M&L for Machine pressed precast concrete interlocking paver block 60mm thick with grey cement and pigment any shape and size confirming to IS 15658-2006 of M-35 grade Complete.

Description all as per ser item No 129 but except paver block

M&L Sand filling under floors or in foundations including watering and consolidation

Demolition of cement concrete reinforced as in chullah hoods ,drain cover, shelves and plate form etc complete all as specified and directed

M&L pre cast RCC (1:1.5:3) type A-1 as in manhole cover, drain cover and set in cement mortar (1:4) including necessary formwork complete.

M&L mild steel TMT bar 10 mm dia and over cut length cut to length bent to shape required including cranking bending and binding with MS wire not less than 0.9mm dia or securing clips complete.

M&L 300mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars complete.

M&L 450mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars complete.

Demolition of Stone slabs/ tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete.

M&L 18-20mm thick Granite(of any type) work (table rubbed and polished) in for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

Dismantling post or struts (wood,steel or RCC) any position,including taking out embedded portion and making rood disturhed grond, post embedded in concrete, brick work, masonry etc.

Dismantling of chain link fencing any size or type

M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete, filling of post holes etc complete all as specified & directed.

M&L for mild steel angle or flat iron conforming to Fe.290.Gde-E-165 as in support/ hanging including embedded in walls after making the holes of required size and filling with CM 1:3 complete all as specified & directed.

M&L for mild steel work conforming to Fe.290.Gde-E-165 as in fencing posts & struts including cutting tops to shape as required, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) and embeding in concrete complete all as specified & directed.

Supply only 3.15mm dia GI wire 100x100mm mesh (chain link fencing) made up to mattresses or cages lapped wired and laid in position including closing and tied with RCC posts properly comlete all as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire

S&Fin repairs Mild steel round bars 10mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to Fe-410 W

S&F in repairs Galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc all as specified and Directed (each line wire to be measured) complete.

S&F Mild steel screw bolts (machine made) with hexagonal /square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut,length of bolt exc 5cm but n exc 10cm long dia of shank 5 to 10 mm

M&L two coat synthetic enamel paint over a coat of red oxide on steel surfaces of any description not exc 10cm in width or girth when unconnected with other painting or when painted in a different tint.

M&L two coat synthetic enamel paint over a coat of red oxide on steel surfaces of any description over 10cm in width or girth not otherwise described including preparation of surfaces.

Cleaning and removing all scale and dirt etc by using blenching powder from water tank and from mouth of circulating pipe,etc Capacity of tank n exc 250 litrres

Description all as per ser item No 151 above but Capacity of tank exc 250 litres & n exc 500 litres

Description all as per ser item No 151 above but Capacity of tank exc 500 litres & n exc 1000 litres

Description all as per ser item No 151 above but Capacity of tank exc 1000 litres & n exc 2000 litres

S&F in repair PVC ball valve 15mm dia with epoxy coateed aluminium rod and high density ball (minium weight 142 gms) complete as directed by Engr-in-charge.

S&F in repair PVC ball valve 20mm dia with epoxy coateed aluminium rod and high density ball (minium weight 210 gms) complete as directed by Engr-in-charge.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. Exc 1.5 Sqm each

Description all as per ser item No 157 but exc1.5 Sqm but n.exc. 4 Sqm.

S&F framed work as in doors or gates of angle or other section with guesset plates complete doors etc to be prepared to hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing complete.

S&F 1.00mm thick Mild steel, plain, black sheet in covering to door shutters; covering to door chowkats (frames) cut to size edges beaded if directed, holes punched;incl round headed screws, clout nails or rivets and fixed to wood or steel members, etc.,with plain 40 mm lap joints or welded/riveted seams including bending, turning up,mitred angles, stopped ends, outlets, etc. as reqd complete

M & L cement concrete type C - 1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc complete.

M&L for one coat of white wash on old prepared surfaces on wall etc complete

M/S SHRI SHYAM BUILDERS (BID ID -3469780)

BHARAT ELECTRICAL & ELECTRICAL WORKS (BID ID -3470152)

JAYSHREE ENTERPRISES (BID ID -3469876)

india trading company (BID ID -3469796)