Various mechanical and electrical works to be carried out at water lift station M.G Nishat.

Amount

Providing, installation, testing and successful commissioning of foot valve 200 mm ND, foot valve confirming to IS 4038. The valve should have following specifications: Nominal Diameter :200mm, Housing: Cast Iron/DI/MS Strainer: Cast Iron/DI/MS/SS, Door: Cast Iron/DI/MS/SS Door face: Natural rubber. The job includes with all carriage

Providing and fitting of 200 mm ND, 2 M long M.S column pipe 6mm thick after retrieving old damaged column pipe. The job includes providing and welding of 16 mm thick M.S flanges to be connected on both sides of the of the pipe which should match with existing flange of the suction side and the new foot valve The Job also includes two coats of synthetic enamel including floating coat and priming coat of red oxide. All the material, gaskets tools, tackles, skilled/ unskilled labours, electricity or D.G set, what so ever required for the execution of the job has to be arranged by the firm. With all carriage

Repairs to the vacuum pump pipe fitting by way of replacing of damaged portion pipe by 50mm ND M.S pipe C class 6m long and 25 mm ND MS pipe C class 6 m long including 4 Nos new MS flanges, other fittings. The job includes modification of existing system as per the site requirements. Job also includes two coats of synthetic enamel including floating coat and priming coat of red oxide with all carriage

Providing and fitting of required size MS nuts and bolts for the above-mentioned job and for replacement of other worn-out nuts and bolts of the lift station with all carriage.

Providing, fabrication and fitting of trash guard at intake sump of lift station M.G. Nishat. The job includes the fabrication of 4 nos windows with locking arrangement and key to separate window, each widow of approximate size of 3.5’X3.25’ fabricated out of the same material and style. The Job also includes two coats of synthetic enamel including floating coat and priming coat of red oxide The men and machinery and material required for the job are to be provided by the contracting agency. The job includes two coats of paint with priming coat of red oxide. With all carriage

Providing and fitting of 400 Amp copper thimbles to be crippled with the existing copper conductor with all carriage.

Providing and fitting of 400 Amp Aluminum thimbles to be crippled with the existing Aluminum conductor with all carriage.

Providing and fitting of (0-500) volts, Digital Volt meter after removing out old/damaged volt meters of reputed make with all carriage.

Providing and fitting of (0-100) Amps Digital Ampere meter after removing out old/damaged Ampere meters of reputed make

Replacement of damaged LT bush rods to the 250 KVA voltage stabilizer after disconnecting the incoming and outgoing cable terminals from the voltage stabilizer, removing the top cover of the voltage stabilizer followed by removing the damaged LT bush rod from it. The job further involves providing and fitting of new brass bush rod along with insulator cup and allied washer etc. as per sample after removing the damaged one. With all carriage.

Providing of 12 mm thick palmative packing to be used for various Acceptable/reputed Make with all carriage.

Providing and applying reputed make grease to be used for various horizontal pumps and sluice valves of lift stations Mughal Garden Nishat with all carriage.

Doti/cotton cloth for day-to-day cleaning of machinery with all carriage of size 1.5mx1m

M/S FAROOQ AHMAD MECHINICAL WORKS