CPPP

Technical Eval

Works

Electrical Works

Repair and Maintenance of various capacity of Servo Stabilizer, UPS,Ceiling Fan, Air conditioner ,Geyser,Air Heaters and various type of Motors installed at various establishment under FTR HQ BSF Kashmir.

DG,BSF,MHA

VARIOUS LOCATION OF FTR HQ BSF KMR | Budgam, Jammu And Kashmir

Amount: ₹5.9 LCloses: 23 Jun 2026Closed

Timeline

Published13 Jun 2026
Closed23 Jun 2026
Technical Evaluation25 Jun 2026
Award—

Bids

2 Bids25 Jun 2026

#	Company	Status
1	M.L. ELECTRICAL AND MECHANICAL WORK Accepted-Technical	Accepted-Technical tender Document found as per NIT
2	M/S CRESCENT ENTERPRISES Accepted-Technical	Accepted-Technical tender Document found as per NIT

Tender Value

₹5.9 L

EMD Value

₹11,891

Closing Date

23 Jun 2026, 11:00 amClosed

Tender Inviting Organisation

Name

ASSISTANT ENGINEER ELECT

Address

O O IG FTR HQ BSF KMR HUMHAMA

Work Description

Repair and Maintenance of various capacity of Servo Stabilizer, UPS,Ceiling Fan, Air conditioner ,Geyser,Air Heaters and various type of Motors installed at various establishment under FTR HQ BSF Kashmir.

Tender Information

Tender ID

2026_BSF_912951_1

Reference Number

257/AC(E)/FTR-KMR/2026-27

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Item Rate

Period of Work

365 days

Location

VARIOUS LOCATION OF FTR HQ BSF KMR

Source Website

Subscribe to view

Eligibility / Pre-Qualification

AS PER APPROVED NIT

Documents Required

16 documents required · 16 mandatory

Fee/PreQual/Technical

RequiredCertificate of Registration of GST (.pdf)

RequiredCopy of PAN Card (.pdf)

RequiredCopy of NIT duly seal and signed on each page by Contractor (.pdf)

RequiredValid enlistment clearly mentioned validity, Class, Financial limit (.pdf)

RequiredValid electrical license issued by state PWD, MES, electricity Department, CEIG (.pdf)

RequiredCopy of three similar nature works with scope of work/schedule of work completion (.pdf)

RequiredIntegrity Pact-1 Performa-I (.pdf)

RequiredWarranty undertaking as per Performa-II (.pdf)

RequiredUndertaking blacklisted debarred by any Govt or Non-Govt. department Performa III (.pdf)

RequiredCopy of Average annual Turnover certificate duly attested by registered charted accountant (.pdf)

RequiredA bank solvency certificate from any nationalized commercial bank (.pdf)

RequiredContact details of the contractor in separate sheet (.pdf)

RequiredBack to back basis as per Performa-VI (.pdf)

RequiredCopy of receipt for physical deposition of original EMD with department (.pdf)

RequiredRemaining document as per NIT (.pdf)

Finance

RequiredAS PER REFER TO BOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹11,891

Important Dates

Last Activity

25 Jun 2026

Published

13 Jun 2026

Bid Opening

24 Jun 2026

Download Starts

13 Jun 2026

Download Ends

23 Jun 2026

Submission Starts

13 Jun 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (27 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Rewinding of stator winding of ceiling fan of 1200 mm / 1400 mm sweep with suitable size of super enameled copper wire including dismantling the old copper wire and vanishing greasing testing etc. as required (including less of scrap material, dismantle copper wire will not be taken back).	25	Nos	821	₹20,525
2	Replacement of fan condencer 2.5/3.15 MFD for above size of ceiling /exhaust fans as required (old condencer will not be retained by the contractor ).	25	Nos	88	₹2,200
3	Providing & fixing (Replacement) of suitable size of bearing 6201 / 6202 of make NBC / SKF for 1200 mm sweep ceiling fan including greasing including less the cost of old bearing etc. as required.	25	Nos	193	₹4,825
4	Providing & fixing of clip/clamp for capacitor including deduct of cost of old clip etc. as required.	25	Each	43	₹1,075
5	Rewinding of stator winding of up to 450 mm sweep size exhaust fans with suitable size enameled copper wire (as per manufactaraur specification) including sleevingof stator suitable insulation materials ie "E" class varnish complete with dismentling and reassambling after repair i/c connection testing etc as required(Burnt copper wire will be retained by the contractor).	8	Nos	903	₹7,224
6	Lowering and Lifting of various sizes submersible motor pump set from/to the borewell including all accessories etc as required.	2	Job	8,857	₹17,714
7	Providing & Fixing of Pump head cast Iron i/c rubber flage suitable for 0.5/1.0 HP monoblock pump etc as required. .	6	Job	1,845	₹11,070
8	Rewinding of 1.0 HP Monoblock / Submersible motor with all necessary materials. The motor is to be wound taking the no. of coil turns and pitch etc as reqd as it was originally wound with reqd. size of super enamelled copper wire with "E" class insulating materials, varnishing,ball bearing,running capacitor, greasing & testing as required i/c transportation from site & back with a guarantee of 6 months. (Including less of cost of old Scap material)	6	Nos	3,120	₹18,720
9	Rewinding of 3.0 HP Submersible/ Monoblock/ Openwell motor with all necessary materials. The motor is to be wound taking the no. of coil turns and pitch etc as reqd as it was originally wound with reqd. size of super enamelled copper wire with "E" class insulating materials, Ball Bearing, varnishing, greasing & testing as required i/c transportation from site & back with a guarantee of 6 months.(Including less of cost of old Scap material)	2	Job	10,087	₹20,174
10	Rewinding of 7.5 HP SuSubmersible/ Monoblock/ Openwell motor with all necessary materials. The motor is to be wound taking the no. of coil turns and pitch etc as reqd as it was originally wound with reqd. size of super enamelled copper wire with "E" class insulating materials, varnishing,Bearing, greasing & testing as required i/c transportation from site & back with a guarantee of 6 months. (Including less of cost of old Scap material)	1	Job	18,301	₹18,301

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.88 MB

Work Item Documents

BOQ_959448.xls

BOQ • 0.28 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

M.L. ELECTRICAL AND MECHANICAL WORK

Accepted-Technical

M/S CRESCENT ENTERPRISES

Accepted-Technical

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Rewinding of stator winding of ceiling fan of 1200 mm / 1400 mm sweep with suitable size of super enameled copper wire including dismantling the old copper wire and vanishing greasing testing etc. as required (including less of scrap material, dismantle copper wire will not be taken back).

Nos

821

₹20,525

Replacement of fan condencer 2.5/3.15 MFD for above size of ceiling /exhaust fans as required (old condencer will not be retained by the contractor ).

Nos

₹2,200

Providing & fixing (Replacement) of suitable size of bearing 6201 / 6202 of make NBC / SKF for 1200 mm sweep ceiling fan including greasing including less the cost of old bearing etc. as required.

Nos

193

₹4,825

Providing & fixing of clip/clamp for capacitor including deduct of cost of old clip etc. as required.

Each

₹1,075

Rewinding of stator winding of up to 450 mm sweep size exhaust fans with suitable size enameled copper wire (as per manufactaraur specification) including sleevingof stator suitable insulation materials ie "E" class varnish complete with dismentling and reassambling after repair i/c connection testing etc as required(Burnt copper wire will be retained by the contractor).

Nos

903

₹7,224

Lowering and Lifting of various sizes submersible motor pump set from/to the borewell including all accessories etc as required.

Job

8,857

₹17,714

Providing & Fixing of Pump head cast Iron i/c rubber flage suitable for 0.5/1.0 HP monoblock pump etc as required. .

Job

1,845

₹11,070

Rewinding of 1.0 HP Monoblock / Submersible motor with all necessary materials. The motor is to be wound taking the no. of coil turns and pitch etc as reqd as it was originally wound with reqd. size of super enamelled copper wire with "E" class insulating materials, varnishing,ball bearing,running capacitor, greasing & testing as required i/c transportation from site & back with a guarantee of 6 months. (Including less of cost of old Scap material)

Nos

3,120

₹18,720

Rewinding of 3.0 HP Submersible/ Monoblock/ Openwell motor with all necessary materials. The motor is to be wound taking the no. of coil turns and pitch etc as reqd as it was originally wound with reqd. size of super enamelled copper wire with "E" class insulating materials, Ball Bearing, varnishing, greasing & testing as required i/c transportation from site & back with a guarantee of 6 months.(Including less of cost of old Scap material)

Job

10,087

₹20,174

Rewinding of 7.5 HP SuSubmersible/ Monoblock/ Openwell motor with all necessary materials. The motor is to be wound taking the no. of coil turns and pitch etc as reqd as it was originally wound with reqd. size of super enamelled copper wire with "E" class insulating materials, varnishing,Bearing, greasing & testing as required i/c transportation from site & back with a guarantee of 6 months. (Including less of cost of old Scap material)

Job

18,301

₹18,301