SPECIAL REPAIRS TO P-166 OR MD ACCN AT DHAN BAHADUR GURUNG COMPLEX UNDER GE (WEST) MATHURA

Amount

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F 125x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and directed.

S&F 105x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and directed.

S&F 35 mm thick factory made flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both sides include provision of suitable blocks for taking mortice locks, latche, or other fittings complete all as specified and directed.

S&F 2nd claass factory made hard wood 35mm thick factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing inculding fxing of hinges complete all as specified and directed.

S&F 28 to 30mm thick factory made solid PVC moulded door shutter with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 150mm stainless steel barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150mm long stainless steel handles, rectangulā ror oval type complete all as specified and directed.

S&F for stainless steel butt hinges medium weight 100 mm long complete all as specified and directed

S&F powder coated Anodised aluminium frame (minimum thickness of powder coating 50 micron) for windows, ventilators (sliding , fixed or casement) with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

S & F powder coated anodised Aluminium alloy sections sliding windows with frames Series-B (18 mm) and , 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed. Note :Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle with or without opeing for AC/cooler as directed by EIC etc

S&F Anodised powder coated aluminium window and ventilator shutters, fixed type with sash bar and louvered, aluminium section weighing 0.55 Kg/M including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F Anodised powder coated aluminium window and ventilator shutters, side hung type with sash bar and louvered, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws incl pegstay 150mmlong, hinges100mm long, suitable handle etc. complete all as specified and directed.

M&L PCC 1:3:6 type C0 using 12.50 mm graded stone aggregate as in bed block or filling of chowkats incl necessary form work complete all as specified and directed.

S & F mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F 300 mm stainless steel sliding door bolts, plate type, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixed complete all as specified and directed.

S&F 100mm long hasp and staple, Stainless steel incl bolt to hinges plate fixed with screws complete all as specified and directed.

S&F 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in door with screws complete all as specified and directed.

S&F in repair Tubular towel rail 20mm dia 600mm long Aluminium Anodised complete all as specified and directed.

S&F in repair curtain rod stainless steel ,20 mm dia mild steel, chromium plated with fixing brackets knobs, stops, rollers, and fancy end caps etc. complete all as specified and directed.

S&F mild steel 300mm ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for 75 mm thick PCC type B-2 (1:2:4) using 40 mm aggregate as in floor finished even and smooth without using extra cement complete all as specified and directed.

Roughening the surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust and brushing neat cement slurry with 3.0 kg of cement per Sqm complete all as specified and directed.

M&L for 25 mm thick PCC type B-0 (1:2:4) using 12.5 mm aggregate as in floor finished even and rough to received top layer or tilingcomplete all as specified and directed.

M&Lfor Non skid Ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:4 complete all as specified and directed.

All as per item no 31 above but as in skirting over & including 10mm thick backing coat in CM 1:3 complete all as specified and directed.

Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and rubbish off the premishes complete all as specified and directed.

M & L for non skid ceramic (colored), 7 to 8 mm thick as in floor area of each tile exceeding 0.06 Sqm but n exceeding 0 .11 Sqm , set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15 mm thick in CM 1:4 in floors, complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles(colored) in vertical surface 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick plaster in cement mortar (1:4) complete all as specified and directed.

Dismantling of Stone slabs and tiles of anydescription or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 16-20 mm thick Granite (of any type) work (table rubbed and polished) in cooking platforms and like in cement mortar(1:4) including pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl and over screed bed or beeding layers of mortar 20 mm thick in CM 1:4 , complete all as specified and directed.

M&L Machine cut kota stone slab flooring one piece as in treads of steps 16-20 mm thick over and incl 20 mm thick screed bed in CM 1:3 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L Kota stone slab 16-20 mm thick ( One piece) in riser of steps, skirting, dado and pillar laid over and incl 10mm thick backing coat in CM 1:4 cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge , such as in steps, cooking platform and other similar situations complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L Brickwork with fly ash old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

M&L Brickwork with fly ash old size bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&L for Rendering dubbing coat over damaged irregular surface of walls/chajjas/ roof projections/ ceiling/ facia etc average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even& smooth including making of drip course and applying three coats of White wash incl taking down/roughening surface of old surfaces by picking sweeping clean and washing with water complete all as specified and directed. Note :Rate for form work if reqd to be incl in the rate quoted by the contractor.

Taking down cement plaster on brick or stone walls,ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in two coats, first coat with 10mm thick in cement plaster 1:6 finished fair and even and second coat in 5mm thick in cement plaster 1:4 in mixed with water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement on wall surfaces complete all as specified and directed. Note:- WPC Shall be measured seperately.

M&L for rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in cement plaster 1:6 finished fair and even complete all as specified and directed.

M&L for rendering 5mm thick on concrete surfaces in ceiling in cement plaster 1:3 finished fair and smooth complete all as specified and directed.

M&L 50mm thick PCC (1:3:6) type C1 as in plinth protection/footpath using 20mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including impression and glass strip or bitumen filling in two panel etc complete all as specified and directed.

M&L for treatment of sunken floor slab comprising of the following specifications with and including demolition of sunken floors complete all as specified and directed:- (i) Cleaning the sunken/lowered portion of \rcc slab surface (incl vertical total depth plus skirting height) of floors by wire brush,chisel out any mortar sticking to the surface and brooming completely. Provn of 40 mm thick avg PCC 1:2:4 type B-O using 12.5mm graded aggregate as in padding concrete to achieve proper slope incl cutting holes in bricks or RCC wall for sprout. (ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with and incl integral water proofing compound Sika Plastocreat plus or equivalent make in Fosroc/Thermax as approved by GE @ 0.2% by wt of cement consumed incl filling it with water to check dampness and seepage and where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out. (iii) All junctions points of side wall where CI/GI/PVC pipes are passing through shall besealed with epoxy puttySikaguard 694 F(I) or equivalent make in Fosroc/Thermax as approved by GE (iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean

(v) Applying two coats of polymer modified cementious water proof coating with Sika Topseal 107 or equivalent make in Fosroc/Thremax as approved by GE over base coat as per manufacturer's instruction to bottom and vertical sides upto finished floor level +100 mm height. The thickness of two layers shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vetical and bottom surface of the sunken portion. (vi) Plaster the bottom surface and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with and incl integral water proofing compound Sika Plastocreat plus or equivalent make in Fosroc/Thermax as approved by GE @ 0.2% by wt of cement consumed as per manufacturer's specification incl rounding of corners and injuctions sloping towards spout. (vii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint. (viii) The sunken floor shall be fixed with lean concrete 1:7:12. Note :- Test the water proofed area (ponding test) by filling water for atleast 72 hours and tested for leakage/seepage and to the entire satisfaction to GE. Test record for each sunken slab shall be maintained. The treatment shall be carried out by authorised applicators of chemicals. Cost of testing and all M&L is included in the rates quoted above.

Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and directed.

Dismantling brick/concrete tiles any size laid bedded and pointed in any mortar etc incl existing roof treatment of any thickness complete all as specified and directed.

M&L for Providing, cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate in coping, coving, roof padding, padding in sunken slab, complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces finished fair and even in CM 1:4 mixed with water proofing compound complete all as specified and directed. Note:- WPC shall be measured seperately.

M&L for water proofing treatment with APP modified bituminous membrane 3mm thick consisting of the following for RCC roof:- (a) Cleaning plastered roof surfaces and applying a coat of Oxidised bitumen based solvented primer @0.4 Kg/Sqm of approved make on top of dry surface of RCC roof complete all as specified and directed. (b) M&L for APP modified polymeric waterproofing membrane 3mm thick with non woven polyster core of approved make applied by heating one surface of membrane with LPG torch with lap of 100mm and the overlap shall be seated by flame complete all as per manufacture instructions and as directed.

M &L Cement concrete tiles 25cm x 25cm x 22 mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors/roof, incl 20 mm screed bedding layer in CM 1:4 complete all as specified and directed.

Taking up or down steel tubing and connections ,15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections , 20 mm bore complete all as specified and directed.

M&L for Cutting cheses, pinning in, making good to facing where required & pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing etc. and making good, cutting not exc 10CM girth in brick wall etc complete all as specified and directed.

M&L 15 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L 20 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Taking down eaves gutters and rain water pipes, soil, waste and vent pipe ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., ( measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.

S&F 110 mm PVC bore (SWR) pipes of pressure rating 6kg/per sqcm single socketed, excluding fittings in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F 110 mm PVC bore (SWR) pipes of pressure rating 6kg/per sqcm single socketed, excluding fittings in any length with rubber ring joints, fixed in floor complete all as specified and directed.

S&F for 110 mm bore PVC (SWR) bends any radius with oval access door complete all as specified and directed.

S&F for 110 mm bore PVC (SWR) junction , single T equal or unequal complete all as specified and directed.

M&L 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 50 mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall for spout etc complete including taking down old pipe complete all as specified and directed.

M&L for Bands, straps, supports or stays, for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed

S&F in repair for bib taps cast copper alloy with screwed down for iron pipe or brass ferrule and fixed fancy type chromium plated 15 mm bore complete all as specified and directed.

S&F for stop cock angle type cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipe (chromium plated) 15mm bore fixed in repair complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F for fancy type stop cock cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipe chromium plated (concealed type) 15mm bore fixed in repair complete all as specified and directed.

S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC Flush pipe complete including jointing to socket of flushing rim, complete all as specified and directed.

S&F in repair SS Sinks with drainage board made of stainless steel 1.0 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. Note:- Supply of waste pipe & waste coupling will be paid in repective item.

S&F in repair for vitreous china wash hand basin white flat back with vitreous china pedastal white colour size 550 x 400 mm excluding taps waste chain and plug but including bracket fixed in repair complete all as specified and directed.

S&F in repair brass chromium plated shower rose of 125mm size complete all as specified and directed.

S&F Shower arm 15mm size 195mm long with bend of 45 degree with flange of CP any colour (minimum weight 40 gms) complete all as specified and directed.

S& F in repair PVC connection best quality with PTMT nuts 450mm long complete all as specified and directed.

S&F in repair for 15 mm bore chromium plated central hole basin mixer for mixing hot & cold water for WHB complete all as specified and directed.

Dismantling old water tanks and removing to store exc 500 & nexc 1000ltrs complete all as specified and directed.

M&L Rotational moulded polythelene water tanks white colour triple layers (cylindrical vertical with closed top) hoisted and fixed in position for 750 ltr. Storage capacity complete all as specified and directed.

M&L for PCC (1:3:6) Type C-1 with using 20mm graded stone aggregates as in platform for PVC tank all complete as specified and directed.

S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 20mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pie and fixed complete all as specified and directed.

Supply only 32mm Waste fittings, brass, chromium plated for basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Supply only 40 mm Waste fittings, brass, chromium plated for sinks, with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F 20mm GI nipple suitable for HDPE water tank complete all as specified and directed.

S & F 32mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fittings, fixed to WHB, sink complete all as specified and directed.

Preparing new wooden surfaces of any description, over 10cm in width or girth, not otherwise described and M&L for applying a coat of pink primer and two coats of synthetic enamel paint complete all as specified and directed.

M&L for applying two coat of synthetic enamelled paint over a coat of red oxide primer of any girth including preparation of new steel surfaces complete all as specified and directed.

M&L for applying two coats of oil bound distemper using mechanised Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer as mentioned in Particular Specifications and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface over a coat of acrylic water based interior grade primer @ 0.9 ltr (undiluted)/10 sqmtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats incl applying waterproof cement based putty @ 1 Kg (undiluted) per sq mtr. of average thickness 1 mm, of approved makes over the plastered wall after scrapping to prepare the surface even and smooth complete and. Sanding of the putty surface with Wall Sander machine (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7"/9" to make the surface free from dust etc. by skilled labour complete all as specified and directed.

Steps for application of putty:- Step 1) Mix the putty powder by adding 40-50% water and mix it with approved Putty Mixer (Putty mixer with min 1400 W power having mixer rod of industrial steel grade 45 with the mixing capacity of min 2.5 kg putty per minute) Step 2) Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of mechanised Spray Machine with max 6 ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041" Step 3) Allow 6-8 hrs time to dry the putty surface Note: - (a) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application)

M&L for Complete removal of existing treatment on wall/ roof projections including facia,cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust,loose paint etc by skilled labour and applying two coats of oil bound distemper using mechanised Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer as mentioned in Particular Specifications and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface over a coat of acrylic water based interior grade primer @ 0.9 ltr (undiluted)/10 sqmtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats incl applying waterproof cement based putty @ 1 Kg (undiluted) per sq mtr. of average thickness 1 mm, of approved makes over the plastered wall after scrapping to prepare the surface even and smooth complete and. Sanding of the putty surface with Wall Sander machine (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7"/9" to make the surface free from dust etc. by skilled labour complete all as specified and directed.

Steps for application of putty:- Step 1) Mix the putty powder by adding 40-50% water and mix it with approved Putty Mixer (Putty mixer with min 1400 W power having mixer rod of industrial steel grade 45 with the mixing capacity of min 2.5 kg putty per minute) Step 2) Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of mechanised Spray Machine with max 6 ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041" Step 3) Allow 6-8 hrs time to dry the putty surface Note: - (a) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application).

Preparation of new plaster surface and M&L for applying three coat of white wash on ceiling complete all as specified and directed.

Complete removal of white wash on ceiling and M&L for apply three coat of white wash complete all as specified and directed.

Preparing newly plastered or unplastered surface of wall and M&L for applying three coats of white washing complete all as specified and directed.

Preparing old plastered or unplastered surface of wall and M&L for applying two coats of white washing complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in surface channel and drains complete all as specified and directed.

Extra for forming fair finished drain or channel of manholes inner girth n exc 30cm in cement concrete using extra cement including forms mould mitred stopped ends etc complete all as specified and directed.

M&L precast cement concrete type Bo (1:2:4) using 12.5mm graded crushed stone aggregate set in CM (1:4) louvres and jallies, 25mm thick (measured solid), including all mouldings but excluding frame, complete all as specified and directed.

Preparation of old painted steel surfaces of any description over 10 cm width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in replacement 18 MM thick PVC Celuka board of Plain White color both side fixed with screws solvent cement/ adhesive to make kitchen cabinet/cupboard sides top and bottom and shelves inside the cabinets, cupboard shutters/frames complete all as specified and directed. (Density- 575 to 600 Kg/ CBM)

S&F in replacement 18 MM thick PVC Celuka board of Single Side Prelam/Rigidlam color fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinet, cupboard shutters/frames complete all as specified and directed. (Density- 575 to 600 Kg/ CBM)

S&F Auto closing hinges 35 MM of 0 crank (KH-001)or 8 crank (KH-002) openable at 110 digree for kitchen cabinet shutters complete all as specified and directed.

S&F for 40mm width continous (piano) hinges, mild steel,bright finish or electrogalvanised complete all as specified and directed.

S&F stainless steel handles 100 mm size for kitchen cabinet shutters/ cupboard complete all as specified and directed.

S&F magnetic catcher of size 20mmx50mm suitable for kitchen cabinet shutters/ cupboard complete all as specified and directed.

S&F Ball bearing runners 450 MM Telescopic (KTS-20) full extension load capacity 50 kgs complete all as specified and directed.

S&F stainless steel kitchen plate rack overall size 750mm X 600mmx 350mm made out of 0.8mm thick stainless steel sheet etc. complete all as specified and directed.

M&L for 100 mm outet diameter cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

M&L for 100 mm outet diameter cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repair for soap dish,any type,fixed to plugs with chromium plated brass screws complete all as specified and directed.

Taking down shutter only of any description exc 1 sqm but n. exc 2 sqm each complete all as specified and directed.

M&L for preparing new plastered surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having excellent protection against UV, Alkali & Fungal resistance, exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm. of approved colour approved make with low VOC less than 50, Anti Alkali & fungal properties in two coats applied with fully automatic airless spray machine which shall be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer as mentioned in Particular Specifications and accessories having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint with 6 years performance warranty from manufacturer of approved complete all as specified and directed.

Supplying and applying, SmartCare Damp Block 2K, two component elastomeric acrylic polymer modified cementitious waterproofing coating, having 80 % elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications. Sprinkle sand at 10-15 gram per sqft for better grip with plaster complete all as specified and directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition complete all as specified and directed

M&L for 50 mm thick sand stone slab as in chajja/cover slab set and jointed over supports in CM (1:4) complete all as specified and directed.

M&L for Mild steel TMT bars 6 to 8mm dia cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L RCC (nominal mix) 1:2:4 uing B-1 using 20 mm graded crushed stone aggregate) as in chajja complete all as specified and directed.

M&L RCC type B1, 1:2:4 using 20 mm graded crushed stone aggregate as in slab supported on wall , beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Formwork to soffits of chajjas and such as roof slabs, landings and similar work: not exceeding 200 mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete complete all as specified and directed.

M&L for Formwork to edges of concrete flats, floor slabs, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n exc. 20cm wide for fair finished flat surfaces of concrete complete all as specified and directed.

M&L for applying chemical compound with dispersing agents Removing (and not damaging the beneath brick or RCC surface) old existing unserviceable concrete, cement plaster, loose / unsound weaken cement of any description and in any position from existing external / internal surfaces of walls, or any surface average depth 5-25mm (Approx height 4.5 m from natural ground level) with concrete removing agent(except for zinc and galvanised metal) and clean the treated surface immediately after removal treatment, and removal up to the approval municipal dumping grounds specified by the local bodies outside MOD land including cutting of all edges, making square shoulders of the cavities, roughening the smooth surfaces, scrapping out / removing corrosion all loose / scale/ rust etc from the visible unplastered surface complete all as specified and directed. Note-: This item shall be executed by authorised agency, Contractor shall submit the MOU with authorised applicator of manufacturer.

Cleaning all existing reinforcement bars with wire brush/rotary wire brush to make entire surface of bars free from loose torn metallic parts, loose material, dirt etc. and M&L for applying alkaline Antioxydizing agent on the existing rebars and allowing it to react with damaged metal and form a corrosion resistant, insoluble protective layer, as per manufacturer's instructions, including necessary scaffolding, props etc. complete all as specified and as directed Note:- 1. Mode of measurement: per sqm of breaking area of concrete.) 2. This item shall be executed by authorised agency, Contractor shall submit the MOU with authorised applicator of manufacturer.

Providing and applying Zinc rich epoxy anti-corrosive protective coating for reinforcement bars as corrosion protection system in 2 coats to the entire circumference surface of bars as specified and directed by Engr-in-charge. The product should confirm carbonation resistance of 2 mm and bond strength > 1N/sqmm according to ASTM C 882-78 complete all as specified and directed. Note:- 1. Mode of measurement: per sqm of application area of concrete. 2. The rate shall include cost of scaffolding necessary for the work. 3.This item shall be executed by authorised agency, Contractor shall submit the MOU with authorised applicator of manufacturer.

Providing, mixing & applying two component epoxy resin concrete bonding coat on prepared RCC surfaces prior to application of any type of repair mortar or microconcrete as per manufacturer's specification including cleaning of surface to remove all dirt, dust or any other impurities, etc. including necessary scaffolding work, all complete as specified and directed. The product should comply with ASTM C 881 Type II Grade 2 Class B+C complete all as specified and directed. Note-: This item shall be executed by authorised agency, Contractor shall submit the MOU with authorised applicator of manufacturer.

M&L for mixing mechanically PP fibre of 12 mm length with Anti-crack strength in redymix repair mortar with suitable care to ensure dispersion of fibres conforming to ASTM C 1116/C, 1116M-10a 4.1.3 type3 & BS EN14889-2.2006 and providing 10mm thick one componentchloride freethixotropic fibre reinforced polymer mo dified repair mortar at external brick wall with ASTMC109 with flexural strength ASTMC 348 @ 7days meeting 7N/mm2 and tensile strength @ 7 days (ASTM C 307) >3 N/mm2 in cement mortar in the ratio 1:4 mixed with styrene butydiene polymerized cement mortar modifier or AR for bonding with cementious mortar specially adhered to BS6319 having specific gravity of 1.025 to1.04, minimum 43% solid contents) not less than 2% by weight of cement and as per manufacturer’s Instructions. For external columns or any RCC wall surface etc complete all as specified and directed. Note-: This item shall be executed by authorised agency, Contractor shall submit the MOU with authorised applicator of manufacturer.

M&L for curing of the surface using wax based Concrete curing compound CC 75 curing efficiency, CC75 complies with the internationally recognized ASTM C309-90 standards incuding all toolsand tackles complete all as specified and directed. Note-: This item shall be executed by authorised agency, Contractor shall submit the MOU with authorised applicator of manufacturer.

M&L PCC 100mm thick, 1:4:8 (Type D2) using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M & L for Plain cement concrete in foundation filling type D-2 1:4:8 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M & L for brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius in cement mortar 1:6 complete all as specified and directed.

M & L for Plain cement concretein type C1 1:3:6 using 20 mm graded crushed stone aggregate as in copings complete all as specified and directed.

M&L for Rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement complete all as specified and directed.

M & L for Plain cement concretein type C2 1:3:6 using 40 mm graded crushed stone aggregate in surface channels and drains complete all as specified and directed.

M&L for Cement concrete with 1:3:6 type C-2 Concrete bed to drain pipes 150mm dia including packing under, and haunching against the sides of pipes after they are laid and tes complete all as specified and directed.

S & F Reinforced concrete pipes150 mm dia bore, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L for Providing precast cast concreteType B1 1:2:4 using 20mm graded crushed stone aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas,water troughs, mangers, shelvesand similar articleswith plain faces complete all as specified and directed

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Demolition of brick work of any description and in any position built in cement Mortar and removing rubbish n.exc. 50m complete all as specified and directed.

Demolition and breaking up drain pipes, set in cement mortar 150mm internal dia (SGSW, AC or reinforced concrete) complete all as specified and directed.

Taking down surface/ conceled aluminium point wiring (light,bell,fan,socket or power) complete, including fixtures and fittings such as switches,ceiling roses,lamp holders,pendants,sockets, regulators,tubelight fittings etc and making good disturbed surfaces walls, floors etc complete all as specified and directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS-H multistranded copper conductor cable 1.5 sqmm (Phase-Red,Neutral-Black) and earth continuity conductor 1.5 Sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings/fixing accessories as required for the following:-

One light point controlled by one switch complete all as specified and directed.

One light point controlled by two way switches complete all as specified and directed.

One bell point controlled by one bell push complete all as specified and directed.

One 3 pin socket outlet 5amps point controlled by one switch on the same board with other switches complete all as specified and directed.

One 3 pin socket outlet 5 amps point controlled by one switch on independent board complete all as specified and directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm (Phase-Red,Neutral-Black) and earth continuity conductor 2.5 Sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings/fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, socket as required for on 16 Amps socket outlet point controlled by one switch on independent board complete all as specified and directed.

S & F in repairs modular type 6A one way SP switch 1 module confirming to IS: 3854-1997 with finger proof terminal complete all as specified and directed.

S & F in repair modular , single pole, Two way 6 Amp switch complete all as specified and directed.

S & F in repairs Modular Bell push flush type 6 Amp, 1 module, 230 Volts complete all as specified and directed.

S & F Bell ding dong type, AC, 240 volts, single pole complete all as specified and directed.

S & F in repairs modular type 2/3 pin 6 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed.

S & F in repairs modular type 16 A one way SP switch 1 module confirming to IS: 3854-1997 with fingure proof terminal complete all as specified and directed.

S & F in repairs modular type 2/3 pin 16 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed.

S&F modular type 3/5 pin socket with one single pole MCB 20 Amp 230 Volts complete all as specified including concealing in wall suitable for AC and Domestic appliances complete all as specified and directed.

S & F in repairs modular type 120W step fan regulator of 2 module size conformng to IS: 11037-1984 complete all as specified and directed.

S & F Fency Jumbo Batten holder metal ring suitable for LED bulb of 9 Watt complete all as specified and directed.

S&F LED bulb base B22 of capacity 10 watts not less than 700 lumens output at 6500K colour temp, complete all as specified and directed.

S & F in repairs ceiling rose three terminal, 230 Volts PVC / Polycarbonate body, complete all as specified and directed.

S & F LED (1.2 M) smartbrite extra batten made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumen/20 watt at a minimum system efficacy of 2000 lumen per 20 watt and total power consumption not more than 20 watt including driver of capacity 10 KA. it has a rated system life time of 25000 burning hours at L70 and should have a colour temperature of 6500 K, CRI>80, THD<10% AND PF>0.95 complete all as specified and directed.

S & F of LED (0.6 M)/ 2 ft smartbrite extra batten made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 1150 lumen/10 watt at a minimum system efficacy of 1150 lumen per 10 watt and total power consumption not more than 10 watt including driver of 5 KA capacity. it has a rated system life time of 25000 burning hours at L70 and should have a colour temperature of 6500 K, CRI>80, THD<10% AND PF>0.95 complete all as specified and directed.

S&F Security Light of 35 watts of new generation energy saving & environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and impact resistance of IK07 with 10KV Built -in-Surge Protection Devision,should have a colour temperature of 6500 K, CRI>80, THD<10% AND PF>0.95 including suitable pipe, clamps, nut and bolts for mounting the light complete all as specified and directed.

S&F LED bulk Head 10W HEXA environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head back-lit LED luminaire comprising of high brightness LEDs with all connected accessories all as directed and specified.

Taking down carefully sub main wiring with PVC casing capping/PVC surface conduit and making good distrubed surface to match the existing complete all as specified and directed.

M&L for sub main wiring with two single core 4.0 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic PVC casing caping with and including PVC insulated 4.0 Sqm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly including taking down old unserviceable submain wiring complete all as specified and as directed Note : 1. Two runs of cable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit.

M&L for concealed submain wiring with two single core PVC insulated FRLS-H multistranded copper conductor cable of size 06 Sqmm drawing into and including rigid non metallic PVC conduit, medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 06 Sqmm FRLS-H multistranded copper conductor cable as continuous earth wire including cutting chasing and making existing colour on the wall complete all as specified and directed. Note :- two runs of 06 Sqmm copper wire and one run of 06 sqmm copper earth wire alongwith PVC conduit shall be meausred as one unit.

S&F DBs factory made, 12 way sheet steel distribution boards double door, protection class IP-42 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar including taking down complete all as specified and directed.

S & F MCBs of 'C' series SPN 40-63 amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

S & F MCBs of 'C' series single pole 6 to 32 amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

M&L for making of hole in brick wall including removal of dismantled materials, making good disturbed surface, platering, making holes fixigng bolts suitable for fixing 250/300 mm exhaust fan frame complete all as specified and directed.

Supply only PVC connection, steel braided suitable for hot & cold water supply with chromium plated brass screwed nuts at both ends with washers for making water connection of inlet & outlet complete all as specified and directed.

Supply, installation, testing & commissioning of electric storage water heater of 25 litre capacity, rated voltage -230 VAC, single phase, 50 Hz of rated power input-2000 Watt conforming to IS 2082 with standing loss ≤ 0.511 & ≥ 0.465 KWh/24Hr/45°C (5 Star BEE rating) having feroglas dry powder coating in water stoarge tank of ultra thick super cold rolled steel plates of high-strength, sock - proof ABS body using IPX4 technology to protect electrical parts from water splash whirlflow technology to avoid direct contact between cold and hot water flow, glass coated incoloy heating element for good corrosion resistance with execllent resistance to both oxidation and carbonization, feather touch panel for temperature setting between 25°C to 75°C to control energy consumption, digital display with 3 preset controls for easy operation, energy saving high density thick PUF insulation for better heat retension, having sacrificial magnesium anode rod with steel core to protect water tank from rust and corrosion to enhance the tank life, having safety feature like thermostate, thermal cut off, multifunction valve, shock-safe plug to prevent electric shocks by cutting off the power in case of current leakage suitable for high-rise buildings of 8 bar (0.8 Mpa) pressure including fixing & connecting accessories like mild steel anchor fastener of size 10 x 100mm with nuts and washers, drilling/making hole on wall with provision of stainless steel breaded (SS 304 Graded) connection pipe (01 Pair) in 600 mm long for hot & cold water circulation with nuts and washers and testing thereafter complete in all respect complete all as specified and and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm including grouting of frame in wall and connecting with and including 3 run 1.5 Sq mm single core, PVC insulated but unsheathered FRLSH multistranded copper conductors cable from ceiling rose to exhaust fan all as specified and directed.

Supply and fixing exhaust fans 300 mm sweep metallic body, heavy duty, four blade, double ball bearing, 1400 RPM, minimum air delivery discharge 1710 CMH suitable for SP, 230/250V, 50 Hz AC supply with protective bird guard with louver shutters including grouting of frame in wall and connecting with and including 3 run 1.5 Sq mm single core, PVC insulated but unsheathered FRLSH multistranded copper conductors cable from ceiling rose to exhaust fan complete all as specified and directed.

M & L in replacement of Earthing complete with galvanized steel earth plate electrode 60cmx60cmx 6 mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level, connected to galvanised earth strip 25x4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elecrical plate No 3 of MES SSR Part I connected to main DB or main control board all as specified and testing on completion including provision of earth wire portected by galvanised iron 40 mm bore light grade pipe with all fittings from the earth electrode fixed along pole with and including 25 x 6 mm flat iron clamp, bolts, nuts and washers and watering pipe shall be 20 mm bore GI medium grade from Top of the earth electrode to bottom of the earth pit and earth electrode shall be surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides including all excavation and earth work in any type of soil and removal of soil upto 50 metre, PCC pit with pre-cast RCC cover with handle with 10mm dia, charcoal/salt, funnel, CI frame etc complete all as specified and directed

Supply and fixing ceiling fans complete with blades, down rods, remote,electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current motor (BLDC) including taking down old unserviceable fan of any sweep and deposit to MES store yard by the contractor complete all as specified and directed.

Taking down of smart prepaid meter with accessories & refixing the same after completion of surface work with nut, bolt etc complete all as specified and directed.

Material and labour for painting of steel surface of LT Energy Meter Panel from inside and outside complete with two coat of synthetic enamel paint(Spray painting) after removing loose paint and rust properly as per existing colour including necessary minor repair work required complete all as specified and directed.

S & F MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA including taking down existing HRC fuse isolator complete all as specified and directed.

Supply, laying, jointing & testing 20 mm mild steel galvanised water tubing, medium grade with all GI fittings including cutting, screwing etc and laid in trenches, on wall, floors, ceiling etc complete all as specified and directed.

S&F in replacement 20 mm gun metal globe or gate valve conforming to IS : 778 ISI marked with iron wheel head screwed both ends for iron pipe including GI fitting socket, nipple, unions as well cutting of pipe and necessary earth work for following size complete all as specified and directed.

S&F in repair/replacement float valve of 20 mm dia ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in hard/dense soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Filling approved river sand in trenches for sand cushion for laying of cables to the full width of excavated trench , gently punned down etc complete all as specified and directed.

M&L for Bricks slightly over burnt (kiln burnt), old size bricks , best quality locally available , laid flat dry laid in trenches for cable protection complete all as specified and directed.

Supply and lay in replacement of LT cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core complete all as specified and directed.

Supply and lay in replacement of galvanised iron pipe 50mm dia light grade incl all fittngs for protection of UG cable complete all as specified and directed.

M&L for drilling hole under road for laying of U/G cable through pipe of suitable size complete all as specified and directed.

M/s Singh Engineering Corporation (BID ID -3394732)

Ms Kamal Kant Agarwal (BID ID -3397458)

B S ENTERPRISES (BID ID -3404985)

Ahmed constructions (BID ID -3405583)