TP1-53/2025-26 OF CE/TP-I/CNI

Amount

Earthwork excavation for levelling the site in hard gravelly soil and deposting on bank with an initial lead of 10 mtrs. and lift of 2m for Ordinary soil excavation.

Earthwork excavation for foundation with an initial lead of 10 m and lift of 2 m etc complete for in hard gravelly soil

Earthwork excavation for foundation with an initial lead of 10 m and lift of 2 m etc complete For in medium rock and dense medium rock not requiring blasting.

Earthwork excavation for foundation with an initial lead of 10 m and lift of 2 m etc complete for Hard Rock requiring blasting & stacking

Earthwork excavation for foundation with an initial lead of 10 m and lift of 2 m etc complete for removing hard rock by wedging and chiseling and trimming to proper shape where blasting is prohibited.

PCC 1:3:6 using 20mm HBG metal for foundation without formwork including cost of cement , materials, labour, lead, lift etc. complete

PCC 1:2:4 using 12 to 20 mm HBG machine crushed metal for plinth without formwork including cost of cement all materials,labour,lead lift, curing etc., complete.For Transformer plinth and Breaker plinth without form work

PCC 1:2:4 using 12 to 20 mm HBG machine crushed metal for plinth with formwork including cost of cement all materials,labour,lead lift, curing etc., complete.For Structure Plinth and retaining wall with form work

RR masonry in cm 1:5 for foundation and basement including cost of cement all materials, labour, lead, lift etc. complete

Refilling the foundation with excavated earth and consolidation as per standard specification with all lead, lift etc. complete

Supplying and filling in Good quality of gravel in layer of 150 mm thick well watering and consolidation including cost of earth, labour, lead, lift etc. complete for basement

RCC 1:1.5:3 using 12 to 20 mm HBG metal for plinth beam & Raft beam including cost of cement all materials, labour, lead, lift, curing etc. complete but excluding cost of steel reinforcement

Brick work in cm 1:5 using II class chamber burnt bricks of size 230x110x70mm for super structure including cost of cement, all other materials, labour, lead, lift etc. complete.

Brick work in cm 1:3 using II class chamber burnt bricks of size 230x110x70mm for partition wall including cost of cement, all materials, labour, curing lead, and lift etc. complete.

Brick work in cm 1:5 using using II class chamber burnt bricks for cable duct including cost of all materials, labour, lead, lift etc. complete

RCC 1:1.5:3 using 12mm to 20 mm HBG metal including cost of cement, all other materials, labour, curing cost of centering charges lead, lift etc. complete but excluding cost of steel reinforcement For Lintel

RCC 1:1.5:3 using 12mm to 20 mm HBG metal including cost of cement, all other materials, labour, curing cost of centering charges lead, lift etc. complete but excluding cost of steel reinforcement For Roof Beam

RCC 1:1.5:3 using 12mm to 20 mm HBG metal including cost of cement, all other materials, labour, curing cost of centering charges lead, lift etc. complete but excluding cost of steel reinforcement For Columns (Varandah pillars)

RCC 1:1.5:3 using 12mm to 20 mm HBG metal including cost of cement, all other materials, labour, curing cost of centering charges lead, lift etc. complete but excluding cost of steel reinforcement For Sunshade (0.60m width)

RCC 1:1.5:3 precast slab for septic tank cable duct cover slab and fencing form work using 12 mm to 20 mm HBG metal & smooth finish including cost of all materials, labour, lead, lift etc. complete but excluding cost of providing steel reinforcement

Flooring with best quality of Vitrified tiles 0.6x0.6 laid in cm 1:3, 20 mm thick and pointed with same colour cement over a bed of PCC 1:5:10, 100mm thick using 40mm HBG metal for control room and J.E room & verendah floors including cost of all materials, labour, lead, lift etc. complete (make: ISI STD) for flooring ( Johnson,Kajaria)

RCC 1:1.5:3 using 12 to 20 mm HBG metal for roof slab and ceiling plastering with cm 1:3, 12mm thick including cost of all materials, labour, lead, lift etc. complete but excluding cost of steel reinforcement. For Roof slab 130 mm thick

Providing anti-termite treatment around the building and foundation including cost of all materials, labour, lead, lift etc. complete

Providing steel reinforcement MS/RTS rod of size 16 mm and below including cost of binding wire, labour charges for cutting, bending, tying straightening fixing and placing in position including cost of all materials, lead, lift etc, complete.

Providing projected border 15 cm width, with cm 1:3, 20mm thick for plinth beam including cost of all materials, labour, load, lift etc. complete.

Providing projected border 7.5cm width in cm 1:3, 20mm thick at top of parapet wall, sunshade and control room inner walls including cost of cement all other materials, labour, lead, lift, etc. complete.

Flush pointing with cm 1:3 for RR masonry including cost of cement all materials, labour, curing, lead, lift, etc, complete

Plastering with cm 1:3, 12mm thick for partition walls cup board walls, steps including cost of cement and all materials, labour, lead, lift etc. complete.

Plastering with cm 1:5, 12mm thick for inside and outside the building including cost of cement all other materials, lead, lift curing etc. complete.

Providing and fixing in position of 110mm dia PVC down fall pipe of 4-kg/cm2approved quality with bends, shoes, clamps etc. as per specification including cost of all materials, labour, lead, lift etc. complete.

Supplying and fixing of white glazed wash basin of size 550x400mm with all accessories such as Cast Iron Bracket,32 mm da CP waste coupling, Rubber Plug and chain,32 mm dia B class GI waste pipe,5mm dia GM wheel valve ,15mm and PVC pipe and 25mm dia mirror of size 600x450mm including cost of all materials, labour, lead, lift, etc. complete.

Providing 225mm width internal open drain with PCC1:4:8 concrete& plastered with cm 1:3, 12mm thick including costal cement& all materials, labour, lead, lift etc. complete

White washing two coats by using emulsion paint over primer coat with white colour for ceilings including cost of all materials, labour, lead, lift etc., complete.

Colour washing two coats inside walls using interior emulsion paint over a primer one coat and two coats of wall putty including cost of all materials,labour,lead,lift etc., complete

Colour washing two coats outside walls using Exterior emulsion paint over a primer one coat and two coats of all materials,labour,lead,lift etc., complete

Providing and laying weather proof Tils 300mmx300mm size over screed concrete1:3:6 with average thickness of 25 mm for required gradient and using best quality of one course of weather proof tils of approved quality using in CM 1:3, 12mm thick and using 3mm spacer and pointing with water Repellent U Bond and grout including cost of all materials, transport curing etc., complete.

Supplying and fixing of 20 mm dia PVC pipe of approved for water supply arrangements including cost of PVC pipes specials etc. labour charges for laying cutting jointing lead, lift etc. complete.

Writing the name of the substation and safety slogan in& out side of the control room building over plastered surface using approved colour and quality enamel paint over a coat of primer including cost of all materials, lead, lift etc. complete.

Transport and fixing in position of precast slab for covering the septic tank including cost of gap filling with cement mortar, labour, lead, lift etc. complete.

Supplying and fixing of 110mm dia pvc pipe for cable duct inside the control room building & septic tank connection including cost of all materials, lead, lift etc. complete

Supplying and fixing of anodized aluminium fully glazed door using 101.60 x44.45x2.10mm box section for outer frame, 53.70 x 44.50x2.30mm @1.238kg/m box door vertical and top 83.50x44.45x2.4mm box section for bottom panels with 6mm clear glass including cost of alum clips rubber beedings alum fixtures such as tower bolt, pivot automatic hydroulic door closure brass mortice lock handle ok. Including cost of all materials, labour, leads, lift etc. complete. (1.20x2.40m size single leaf)

Supplying and fixing at anodized aluminium door using 101.60x44.45x2.10 mm @1.608 kg/m box section for outer frame. 53.70x44.45x2.30 @ 1.238 kg/m door vertical and top 83.50x44.45x2.4mm box section for bottom panels with 9mm thick regular grade pre laminated particle board & top panel with 5.5mm thick clear glass including cost of alum. Clips rubber beedings alum. Fixtures such as tower bolt, pivot brass mortice lock handle, etc. of approved quality including cost of all materials, labour, leads, lift etc. complete (1.00mx2.20msize single leaf)

Supplying and fixing in position of anodized Al. glazed sliding window of size 1.20 x 1.35m as per ISS 1038-1958 (1245 ISS) using Al. sections window frame bottom two track sliding 61.85 x 31.75 x 1.50mm @ 0.909 Kg/m, top & side 61.85 x 31.75 x 1.50mm @ 0.784 Kg / m shutter plain out side 40 x 18 x 1.55mm @ 0.547 Kg /m shutter inner lock 40 x 18 x 1.45 mm @ 0.607 Kg /m shutter runner top & bottom 40 x 18 x 1.55mm @ 0.547 Kg / m with glazing clips rubber gaskets sliding wheel & 5.5mm tk sun cool glass including cost of all materials, lock arrangements labour, lead, lift, etc., complete.

Supplying and fixing in position of steel Ladder and steel door , ornamental grills for window with flats of approved size and design with all fittings and furniture and paintings two coats of approved best quality of enamel paint over primary coat including cost of all materials, lead, lift etc. complete.

Supply and fixing of 4’40W twin mirror optic suspension type fitting (Phlips/Crompton/Wipro ) complete with louvers cover etc complete SD 96

Supply and fixing of slanting (or) straight holder with fancy shade (or) WT bulk head fitting for incondenscent lamp with CFL bulb etc. of approved quality and make. SD-81 (Phlips/Crompton)

Supply and fixing of 1 No. Horizontal type 4 way triple pole neutral MCB distribution Board sheet steel encloser with 40A 4 pole MCB isolater as incomming and 12 Nos 6 A to 32 Ams Sp MCB as outgoing in flush with wall and making good of the concealed portion all materials, lead, lift etc. complete.

Supply and fixing of 1200 mm sweep Ac ceiling fan complete with regulator with 300mm down rod including fan clamp with side plate and cross arm conduit pipe of suitable length cost of all materials etc. complete SD 111

Wiring with 2 x 1.5 sq mm pvc insulated S.C unsheathed copper conductor of 1100 volt grade in suitable pvc rigid pipe on wall or ceiling with pvc accessories and with teak wood switch box and 5 Amps F.T switch with painting of suitable colour for open pvc light point and Fan point. SD22

Wiring with 2 x 1.5 sq mm pvc insulated S.C unsheathed copper conductor of 1100 volt grade in suitable pvc rigid pipe on wall or ceiling with pvc accessories with 150 x 100 x 113 mm Teak wood switch box for 5 Amps 3 pin non- interlocking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point. SD - 34

Supply and fixing of 4’36 w fluorescent fitting of approved brand with (Philips/Crompton) with TW round block on wall or ceiling with tube with pvc unsheathed leads from terminal to the fittings. SD-87

Supplying and fixing of emergency lamp of approved make including cost of all materials, lead, lift etc. complete

Supplying and fixing musical quartz type wall clock of of size 30 x 30 cm of approved quality such as Ajantha, Seiko, Citizen etc including cost of all materials, lead, lift etc. complete

Supplying and fixing of first aid box inside the control room building as per standard specification including cost of all materials, lead, lift etc. complete

Supplying and fixing of 1 No (250 V HPSV lamp) sodium vapour lamp in front of control room building including cost of all materials, labour, lead, lift etc. complete

Supply and fixing of GI angle for cable duct angle including cost of all materials ,all lead lift etc complete.

Supplying and fixing in position of 1000 litres capacity PVC sintex tank of ISI make including cost of all materials transport charges GI nipple, GI Union etc complete.

Drilling bore well of 150mm dia 6” in all soils, hard rock etc., including transporting of machineries with equipments and all necessary T & P’s labouretc., complete as per specification Upto 100 Mts

Drilling bore well of 150mm dia 6” in all soils, hard rock etc., including transporting of machineries with equipments and all necessary T & P’s labouretc., complete as per specification Beyond 100 Mts.

Supply and erection of 180mm (7”) dia rigid PVC casing pipe, having 6kg/cm² including cost all materials,lead, lift, re-boring the holes to required depth etc., complete with cover at the top of the bore well.

Supply and erection of 5 HP ELGI compressor (or) any other reputed make of pump having ISI make with 3phase suguna (or) any other approved make 400V/440/50 cycle motor (5 HP) having ISI make (or) as approved by the Board Engineer at site with air pipe of 20mm dia to pump water to a height of 175mts.and delivery unit with foot valve v-belt arrangement including cost of all materials, labour, erection charges, 5 HP, 400/440V L&T make starter to suit the compressor including the cost of all materials, labour, lead and as per the instruction of Engineer in charge at site complete in all respects.

Supply and erection of 3 phase 30/32 Amps ICTP switch with fuse arrangements to suit the compressor with cost of all materials, labour, lead and lift etc., complete in all respects.

Supply and erection of 40mm dia HDPE hose in black colour having ISI mark and as per IS 4984 -84,40mm dia (10 Kg/CM²) in and outside of the bore well including cost of all materials, labour, lead,lift etc., complete.

Supply and erection of 20mm dia HDPE hose in black colour and havingISI mark and as per IS 4984 - 87, (10 Kg/CM²) in and outside of bore well including cost of all materials, labour, lead, lift etc., complete.

Supply and fixing of 15 Amps main fuse carrier in T.W.Board (600x600mm) with hings,screw, hook wall varnished including cost of all materials, lead, lift etc., complete in all respects.

Supply and laying of 12 mm G.I. pipe of medium class for air compressor cost of G.I pipe, specials, cutting, threading, labour, lead, lift as per the instruction of Engineer in charge at site.

Providing Anchor /Grip rod for foundation in the rock surface with drilling of 40 mm dia holes and fixing of 25 mm dia RTS rod 1.m length inside the holes and 1m length out side the holes with L shape bending including cost of all materials labour lead lift etc complete.

Conducting Water divining Test for fixing of Bore well point including cost of all hire charges of T&P and Transport charges etc complete.

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. For S Type chair with nylon seated

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. For Three drawer steel table with Sunmica top of size 1200x750x750mm

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. For Steel side rack open type 1100x400x1200

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete.For PVC Nylon chair of approved quality

Labour charges for supply, fabrication and fixing of Template including aligining in position including labour lead lift etc., complete.

Labour charges for supply, Fabrication and fixing of GI grouting bolt for plinths as per specification and drawing including cost of all materials labour lead lift etc., complete. (20 mm Dia 1.2 m length)

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., complete. 40mm dia PVC Pipe

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., complete. 32 mm dia PVC Pipe

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., complete. 25mm dia PVC Pipe

Supplying and fixing inposition of GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete. 40 mm dia GM gate valve

Supplying and fixing inposition of GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete. 25mm dia GM gate valve

Supply and erection of 20 mm PVC Tap for earth pits including cost of fitting, fixing, all materilas etc., complete.

Trimming the bed and the side slobe of the bank in all soils except hard rock cuto thichness of 7.5 cm and making it ready to receice concrete.

R.C.C 1:11/2:3 concrete for 100 mm thick RCC road work using 12 to 20 mm HBG metal including form work by using channels by laying Panel type and Road top finishing by providing brushing for rough finishing , including cost of all materials all lead and lift etc complete.

Providing expansion joint using sale tax pad for every 5 m intervals and after completing the curing period removing the pad and refilling with M sand with Bitumn in the required ratio including cost of all materials all lead lift etc complete.

Providing RCC Hume pipe in the RCC road (30cm) including cost of all materials ,labour lead lift etc complte..

Supplying and filling of stone dust with required thickness all lead and lift including and all other T&P etc., complete.

Supplying and filling of stone chips 12 mm to 20 mm HBG metal with required thickness all lead and lift including and all other T&P etc., complete.

Supplying and fixing of split Air Conditioner (3 Phase 1.5 Tone capacity) of approved ISI make with all accessories including cost of all materials , leads, lift, fixing charges , etc., complete as per standard specification as directed by Engineer at site etc complete.

Supplu and fixing of 20 Amps DP plug and socket in sheet enclosure with 32 A Dp CB in flush with wall with earth connection (For AC plug) with ISI make all lead, lift, etc., complete.

Supplying and laying 25 mm dia PVC pipe of approved quality for AC unit drain pipe including cost of all materials, lead, lift, labour, charges etc., complete.

Supplying and fixing 5/8" copper tube for connecting AC panel to AC out door unit including cost of all materials ,lead, labpur charges ,etc,complete.

Wiring with 2x4 sq mm (56/0.3) pvc insulated multi stand unsheated copper conductor cable of 1100 V grade in suitable PVC accessories in flush with wall with 150mm x100mmx113 mm steel switch box with 3 mm thick hylem sheet for 15A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point.

Providing holes for drain pipe in brick walls and finishing etc., complete.

CGST in % (For Bidders inside TamilNadu)

SGST in % (For Bidders inside TamilNadu)

IGST in % (For Bidders outside TamilNadu)