Name of work - Balance work of Piped Water Supply Schemes of Villages basahat MALPURA of Village Khutkheda Block Sonkatchh of Distt. Dewas to make them functional including cost of all material and labour complete with testing of all work

Demolishhhing Cement Concrete manually /by mechanical means including disposal of material within 50m lead as per direction of Engineer in Charge , Nominal concrete 1:3:6 or richer mix (i/c equivalaent design mix ) USOR PHED 2018 Item No.16.15.1 page no 209

Installation of HDPE pipe by Horizontal Direction Drilling Method including preparing and setting up the plant and equipment , making string of new pipe material, installing new pipe string and making the system ready for commissioning by HDD operation including drilling, stringing,reaming and pulling back the new pipe on the designed bore path alignment , proper disposal of drilling fluid, as per code of practice for horizontal direction drilling technique suiting Indian conditions. Required pipes/specials and other civil work shall be paid separately - In all types of soils. HDPE pipes of any class 90 mm outer dia.(PHE USOR 2018 No 16.3 page 207)

Earth work in Excavationby mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be leveled and neatly dressed. Al Kind of Soil. USOR. PHE 2018 Item.no. 16.4 -P.no.207

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be leveled and neatly dressed. Soft rock with or without blasting or bituminous pavement / cement concrete road. USOR. Item.no.16.6(a)-P.no.208

Providing, Laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical jointed),90 mm dia HDPE 6 kg, USOR 2018 6th amendment item 9.1A page no 9

Providing, Laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical jointed),90 mm dia HDPE 10 kg, USOR 2018 6th amendment item 9.1A page no 10

Providing butt fusion welded joint/joining by heating to the ends with the help of Teflon coated electric mirror/heater ends together etc. by thermosetting processes to HDPE Pipe and specials. (6 kg. 8 kg. 10 kg.) (50 mm & above fusion jointed & below 90 mm mechanical jointed),090 mm outer dia,USOR item 9.7 / P.No- 124 USOR 2018 6th amendment

Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE8O/PEf 00 virgin polymer and compatible with PE80iPE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking ect complete Electro Fusion Coupler USOR 2018 6th amendment 9.14.1.8 pg no 16

Providing and laying HDPE Bend 90º confirming to IS specifications.2018 USOR6th ammondment .Item.no.9.2 -P.no.09 90 mm - 6 Kg / cm²

Providing and laying Equal HDPE Tee confirming to IS specification 2018 USOR6th ammondment .Item.no.9.4 -P.no.10 90 mm - 6 Kg / cm²

Providing and laying HDPE End Cap confirming to IS specifications. 2018 USOR6th ammondment .Item.no.9.8 -P.no.11 90 mm

Providing and fixing of Ductile iron double flanged sluice valves as per IS : 14846-2000 fittesd with cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete 80 MM DIA PN-10 USOR 2018 Item no. 4.41 page 71

Construciton of Brick masonary valve chamber with 20 cm thick wall in 1:6 CM with 12 mm thick 1:4 Cement Plaster and base course 10 cm thick in M-15.Inside Dimensions 90x60x100cm with Heavy Duty SFRC chamber cover with frame size 130 cm x 100 cm x 10 cm including cost of materials, labour etc complete ,USOR 2018 Amdt-II item 17.46.2.

Filling available excavated earth in trenches, lead up to 50m and lift upto 1.5 m in all kind of soil excluding watering and ramming.USOR. Item.no. 16.10b -P.no 208

Providing and jointing of following galvanized Iron (MS) Pipes class medium with heavy duty seamless sockets for lowering of submersible pumps including testing of joints, cost of pipes and heavy duty sockets and jointing materials all complete. Pipes and sockets conforming to IS-1239/2011 Part-II, 50 mm dia GI pipe class medium, USOR.Amnd II .no.17.38.1-P.no. 3

Providing and jointing of following galvanized Iron (MS) Pipes class medium with heavy duty seamless sockets for lowering of submersible pumps including testing of joints, cost of pipes and heavy duty sockets and jointing materials all complete. Pipes and sockets conforming to IS-1239/2011 Part-II, 65 mm dia GI pipe class medium, USOR.Amnd II I.no.17.38.2 -P.no. 3

Supply & errection of ready made mini pump house (control pannel box) GI sheet of 18 gauge of size 90cmx90cmx60cm with 40x40x5mm angle Iron frame to fix it 200 mm below ground level with hold fasts grouted in foundation and 600mm above ground level for clearance suitable for fixing of conrol pannel, fuse unit, main switch etc. as per aproved specification. USOR. 2018 Item.no.17.18-P.no. 228

Provision for jointing of TW to Rising main with cost of material / specials such as GI Union,GI Flange,GI Reducer, 50 mm NRV, SV, bends, UPVC MTA, FTA etc as per requirement of site i/c cost of labour with excavation, labour as per requirement complte as per approved specification and as directed by engineer in charge. PHE USOR 17.19 / 228

Provision for Jointing of Rising Main to Sumpwell/ OHT and OHT to Distribution Pipe Line with cost of material / Specials such as Bends,MTA,FTA,Tee,flange,etc as per requirement of Site with excavation , labour as per requirement complete.as per approved specification and as directed by engineer incharge. USOR. Item.no.17.20-P.no. 229

Supplying & Installation of Energy efficient ttr.ee ita. fnO .ating ISI Marked required capacity of Three phase, 50 Hz, 415V, deep well submersible pump Steel trody, suitable for 6"tube well with Control Panel Starter suitable for Submersible pump with dry run protection(Auto cut-off), single phase preventer, connections, including clamps, bore cap, flat cable of length equals to maximum head of the pump plus 5 meters eic. as requiied aJp.r specificationsbut excluding riser pipe and connection cable. l0 H.P. with 20 stages, tlead Mt. 184-80 Discharge LpM 60-270 USOR 6th amd 24.20.106 (a) (ix) pg no. 42

Supplying & Installation of Five star BEE rating ISI Marked required capacity of Three phase, 50 Hz, 415V, Open well Submersible pump, with Control Panel Starter with Dry Run Protection, single phase preventer, connections, etc. as required as per specifications but excluding pipe and connection cable. USOR. Item.no. 24.20.113-P.no. 268 3.0 H.P. Head Mt.15-24, Discharge LPM 615-195USOR. Item.no. 24.20.113 (ii)-P.no. 268

Providing making and testing of Consumer Service Connection (Functional House Hold Tap Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass insert flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE 20mm dia/Gl pipe 15 mm dia (medium class), brass tap with Stainesless steel coating etc. all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), Pre-fabricated cement concrete platform in CC M-20 grade over 75 mm thick M-10 (1:3:6) base and Pre-fabricated Milestone shaped cement concrete stand post as per attached drawingand specifications. Complete item. USOR amd 2018 8th 17.14.1 pg no 1 For connection with 20mm dia MDPE Pipe upto 5 meter and CONCRETE ROAD CROSSING is necessary.

Providing making and testing of Consumer Service Connection (Functional House Hold Tap Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass insert flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE 20mm dia/Gl pipe 15 mm dia (medium class), brass tap with Stainesless steel coating etc. all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), Pre-fabricated cement concrete platform in CC M-20 grade over 75 mm thick M-10 (1:3:6) base and Pre-fabricated Milestone shaped cement concrete stand post as per attached drawingand specifications. Complete item. USOR amd 2018 8th 17.14.2 pg no 1For Connection with 20mm dia MDPE Pipe more than 5 meter & upto 10 meter and CONCRETE ROAD CROSSING is necessary.

Providing making and testing of Consumer Service Connection (Functional House Hold Tap Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass insert flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE 20mm dia/Gl pipe 15 mm dia (medium class), brass tap with Stainesless steel coating etc. all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), Pre-fabricated cement concrete platform in CC M-20 grade over 75 mm thick M-10 (1:3:6) base and Pre-fabricated Milestone shaped cement concrete stand post as per attached drawingand specifications. Complete item. USOR amd 2018 8th 17.14.3 pg no 1 For connection with 20mm dia MDPE pipe upto 5 meter and road crossing is not required. (Distribution pipe line is on the same side of house).

Providing making and testing of Consumer Service Connection (Functional House Hold Tap Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass insert flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE 20mm dia/Gl pipe 15 mm dia (medium class), brass tap with Stainesless steel coating etc. all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), Pre-fabricated cement concrete platform in CC M-20 grade over 75 mm thick M-10 (1:3:6) base and Pre-fabricated Milestone shaped cement concrete stand post as per attached drawingand specifications. Complete item. USOR amd 2018 8th 17.14.4 pg no 1For connection with 20mm dia MDPE pipe upto 5 meter and road (OTHER THAN CONCRETE ROAD) crossing is necessary.

Providing making and testing of Consumer Service Connection (Functional House Hold Tap Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass insert flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE 20mm dia/Gl pipe 15 mm dia (medium class), brass tap with Stainesless steel coating etc. all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), Pre-fabricated cement concrete platform in CC M-20 grade over 75 mm thick M-10 (1:3:6) base and Pre-fabricated Milestone shaped cement concrete stand post as per attached drawingand specifications. Complete item. USOR amd 2018 8th 17.14.5 pg no 1 For connection with 20mm dia MDPE pipe more than 5 meter & upto 10 meter and road (Other than concrete road) is necessary.

Design, Drawing, construction, testing and commissioning of GSR/ Sumpwell of following capacity with all necessary fitting and accessories as mentioned in relevant chapter of USOR, IS codes and departmental circulars. complete turnkey job for following 20 KL (USOR Amndm - II, Itm-26.2.1 / Pg 17)

Design, and construction of RCC framed brick masonary pump house over the sumpwell with all necessary fitting and requirements as mentioned in relevant chapter of USOR. IS codes and departmental guidelines complete turnkey job (USOR Amndm - II, Itm-26.3./ Pg 18)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :With 20mm nominal size graded stone aggregate.Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate (M 10) MPPWD (S.O.R 1.01.2024 ITEM 4.1.1.4 PAGE 40

Reinforced cement concrete work (with 20mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and up to floor two level excluding cost of centering, shuttering, finishing and reinforcement : M 15 -Grade Concrete (MP PWD S.O.R 4.1.1.3 /pg 40)

11 KV line on 140 kg. 8.0 Mtrs. long PCC Poles with rabbit conductor average span of 70 mtr. in rural area. (Schedule Ref. C- 1.2 of MPMKVVCL SOR 2022-23)

11 KV D.P. Structures on 140 kg. 8.0 mtr. long PCC poles for Straight line. Including labour complete (Schedule Ref. C-10.1 of MPMKVVCL for SOR 2022-23)

11 KV DP Structures on140kg 8.0 mtr long PCC Poles for tapping DP including labour completer Per MPPKVV for C 9.1 SOR 2022-23

L.T. Line 1 phase 3 wire on PCC support using Aerail Bunched XLPE cable with maximum span of 50 Meter. (Schedule Ref. D-2.1 of MPMKVVCL SOR 2022-23)

11/0.4 KV out-door type transformer sub-station on 25 KVA on 140 kg. 8.0 meter long PCC Pole. (Schedule Ref. E-1.1 of MPMKVVCL for SOR 2022-23)

Providing and fixing of typical information board made of 75mm square or 75mm dia. circular steel tube of 12 SWG 3.2 m hight and cross member 2 Nos. 1m long, fixed with Angle iron 50 x 50 x 5 mm MS angle on the back side 2Nos vertical and 4 Nos horizontal. It is mounted by 2 plates of 1.6mm thick and size 900 x 750 mm, the pipe shall be erracted on 600 x 600 x 750 mm foundation blocks at appropriate depth made of cement concrete 1:2:4, painted by standard color with lettering, border, heading and logo etc. using sinthetic enamel paint of superior quality including welding, excavation, concreting, painting of base, border and lettering Providing and fixing of typical information board painting andother required details etc completeasdirected by Engineer-incharge.

Providing and installation of automatic water level indicator for supervisory control cum auto on/off panel of motor pump assembly, using GSM module based water level controller and accessories for small water supply scheme, having source more than 500mtr but within 10 Kms as per approved specification and as directed by Engineer in charge. PHE USOR 17.12 P.No 226

Providing and installation of automatic water level indicator for supervisory control cum auto on/off of motor pump assembly inclusive of control panel ,500 mtr long 2 core ,4 pair cable for small rural water supply scheme, having source within 500mtr as per approved specification and as directed by Engineer in charge.(In case of lesser length of cable,equivalent amount @ Rs 12 /-per meter of short length will be deducted from above rate) USOR I.No. 17.11 P.No.226

Please Enable Macros to View BoQ information