REPAIR AND MAINTENANCE OF VARIOUS TYPES OF OTM FURNITURE WOODEN AND STEEL FOR ALL MIL STN UNDER GE RANGIA

Amount

Note:-S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing nailing,wedging, glueing, providing hinges,applying putty to level the surface, placing every part in-tact and polishing the disturbed portion & Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with sand emery paper, the Wooden furniture shall be French polished with high gloss finish shade as approved by GE/BSO ,after properly cleaned and smoothened the surface.Painting the steel disturbed portion & painting steel surface with two coats of synthetic enamel paint of existing shade with spray gun & apply red oxide primer where ever required after properly smoothening the surface with sand paper. All kind of work will be executed where the furniture exist in different user units of GE Rangia including BSO Furniture Yard at Rangia, and office hours only as directed by Engineer-in-Charge.(Note applicable for item Srl No-1.01 to 6.03).

Charpoy MS tubing with plytop:- FD/CWE/TEZ/04: Taking out existing broken plywood from the charpoy by loosening the nut bolts with washer. S&F new 12 mm thick BWR grade plywood fixed to Charpoy frame with Nut, Bolts, (Make of plywood:- Archidply/Greenply/Century)

Taking out existing broken head board from charpoy and fixing new head board with 18 mm thick prelaminated particle board both side laminated shade as approved by BSO/GE with 4 mm thick teak wood beading in matching shade.

Repair of steel parts of charpoy, including remove dents welding, making surface smooth with grinding, damage parts shall be replaced.

S & F New hard rubber shoes as per drg

Painting of charpoy MS tubing with plytop as per above note

Charpoy GI Pipe Plytop FD-220 Taking down old unserviceable long rail of GI charpoy and provn of new GI pipe 32mm dia, medium grade ISI marked long rail duly threaded as shown on drg and as directed by Engineer in Charge. Make: Jindal/Parkash Surya/TATA/Sail.

Cutting existing unserviceable long rail retrieved from above and converting into short rails as per existing pattern/design duly threaded at both ends and fixing the same after taking out old unserviceable short rail complete all as specified and directed by Engineer in Charge.

Cutting existing unserviceable short rail retrieved from item above and converting into legs all as per existing pattern/designand drawing duly threaded at one end and fixing the same after taking out old unserviceable leg complete all as specified and directed by Engineer in Charge.

Taking down old unserviceable three way elbow from the GI charpoy & provn of new three-way elbow 32mm dia ISI marked and fixed as per existing design/pattern complete as specified and directed by Engr-in-Charge

Taking down old unserviceable check nuts from the GI Charpoy and provn of new GI heck nuts 32mm dia ISI marked fixed as per existing design/pattern complete all as specified and shown on drg.

Taking down old unserviceable plywood from charpoy GI Pipe ply top. Supply and fixing of ply wood (Size as per drg) on charpoy GI Pipe ply top with nut and bolt all as specified as per drawing and directed by the Engr-in-Charge. (Make of plywood:- Archidply/Greenply/Century)

Taking down old unserviceable nylon newar from GI charpoys, tightening the frame in original shape. Supply and fixing of plywood (Size as per drg) on charpoy GI pipe with nut and bolt all as specified as per drawing and directed by the Engr-in-Charge.

Locker steel: FD-1029/257 S&F stailess steel hasp & staples including removal of UNSV hasp & staples as per drg.

Repairs to dented door by removing the door from hinges making smooth and straight by denting and refixing by replacing unserviceable hinges.

S & F of CP handle as per drg.

Repair and Replacemet of Leg as per drg.

Painting of Locker steel as per above Note.

Almirah small steel:-FD-1032:- S & F of 3-Way locking system as per drg.

S & F Almirah lock as per existing pattern and shape. Make-Harrison,Godrej, Mowjee

S & F Decorative CP Handle as approved by BSO/GE irrespective of what is shown on drg.

S & F Leg as per drg.

Repairs to dented door by removing the door from hinges, making smooth and straight by denting applying putty and refixing by replacing unserviceable hinges.

Repairs to existing shelf by opening the clips/rivets of shelf, making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets.

Supply & Fixing of new shelf by opening the clips/rivets and refixing by replacing unserviceable clips/rivets as per drg.

Supply & Fixing new door by removing the door from hinges, and refixing by replacing unserviceable hinges. Dimension are as per drg.

Painting of Almirah small steel as per above Note.

Trestle store room steel FD-1043 : Iron Angle 40x40x4 mm

Removal of broken/UNSV flat iron & S & F new Flat iron 50x5 mm

Painting of Trestle store room as per above note.

Trestle store room wooden FD-86M :- Long rails/batten of size 2440x100x100 mm shall be seasoned first class teakwood free from knots and defects.

Legs of size 305x100x100 mm shall be seasoned first class teakwood free from knots and defects.

Polishing as per note above for Trestle store room wooden

M/S NARAYAN ENTERPRISE

M/s SHARMA BUILDERS & ENGINEERS