REPAIR TO WOODEN ALUMINIUM STEEL JOINERY SUNKEN FLOOR DADO SOIL WAST VENT AND WATER SUPPLY PIPES SANITARY FITTINGS PLUMBING WORK INCLUDING CLEANING OF OHTs AND CONNECTED WORKS IN C1 AND C1A AREA UNDER GE EAST MATHURA

Amount

M&L resecuring or easing & adjusting without taking down door shutter of any description not exc 1 sqm each complete all as specified and as directed.

M&L resecuring or easing & adjusting without taking down door shutter of any description exc 1 sqm but not exc 2.00 sqm each complete all as specified and directed.

Taking down Chowkhats or frames with shutter without taking off shutters from the frames not exc. 1.5 sqm each complete all as specified and as directed.

Taking down Chowkhats or frames with shutter without taking off shutters from the frames exc. 1.5 sqm but n exc 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description exceeding 1.0sqm and not exceeding 2.0sqm each complete all as specified and as directed.

S&F Pressed steel frames of size 105x60 mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete as specified and as directed.

S&F Pressed steel frames of size 125x60 mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.with one shop coat of red oxide primer complete as specified and as directed.

M&L for cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in bed blocks for fixing hold fasts and filling of chowkhats etc complete all as specified and as directed.

M&L for prepration of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over primed surface complete all as specified and as directed.

S&F 35 mm thick factory made glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc without sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-1 section 8 clause 8.24 (a) complete all as specified and as directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as spicified and as directed.

S&F 30 mm thick factory made flush shutters, solid core construction with block board core and plywood face panel veneer type on both side complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawingd complete all as specified and as directed.

S&F to the frame at site, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be coverd with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed in the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube but single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F factory made Solid PVC Moulded Door Shutter 28 to 30mm thick (stiles) with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification and drawing complete all as specified and as directed.

M&L for powder coated aluminium frame for doors, windows, ventilators ( minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified including power coating.

M&L for powder coated aluminium door shutters (thickness or powder coating shall not be less than 50 microns of approved colour) aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, lock with 2 keys, anodized aluminum snap beading screws etc. complete all as specified and as directed.

M&L for powder coated aluminium window shutters (powder coating shall not be less than 50 microns of approved colour) side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

S&F 5 mm thick sheet glass, ordinary quality and fixing with rubber beading area n exc. 0.5 square metre in each pane etc complete all as specified and as directed.

S&F 5 mm thick sheet glass, ordinary quality and glazeing with rubber beading area exc. 0.5 square metre in each pane etc complete all as specified and as directed.

S&F 12 mm thick Prelaminated particle board, interior grade, prelaminated both sides with plain white coloured lamination fixed to aluminium shutter complete all as specified and as directed.

S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F 100 mm long size of hinges, extruded aluminium alloy with galvanised mild steel hings pin anodized and fixed type B-21complete all as specified and as directed.

S&F aluminium anodized barrel tower bolts 200 mm length of bolt of extruded section and fixed complete all as specified and as directed.

S&F Extruded aluminium handles of size 150 mm, fabricated type anodised complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete without glazing bars dovetailed or welded fixed to wall complete all as specified and as directed.

S&F MS Framed work such as grills gratings, door and cooler stand, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work confirming to Fe.290.Gde-E-165 complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal or wooden frame, glazed with putty or fixed with beads complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty n.exc 0.50 Sqm in each pane complete all as specified and as directed

S&F 3 mm thick figured glass pin head type and glazing with oil putty n.exc 0.50 Sqm in each pane complete all as specified and as directed.

S&F in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as spicified and as directed.

S&F in repair 2nd Class hard wood plain fillets square/ rectangular or trianguar in section, sectional area exc 6 Sqcm but n.exc 13 Sqcm, clean sawn and fixed with nails complete all as specified and as directed.

S&F in repair 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F in repair 100 mm long size of hinges, extruded aluminium alloy with galvanised mild steel hings pin anodized and fixed type B-21complete all as specified and as directed.

S&F in repair Extruded aluminium handles of size 100 mm, fabricated type anodised complete all as specified and as directed.

S&F in repair Extruded aluminium handles of size 150 mm, fabricated type anodised complete all as specified and as directed.

S&F in repair aluminium anodized barrel tower bolts 100 mm length of bolt of extruded section and fixed complete all as specified and as directed.

S&F in repair aluminium anodized barrel tower bolts 200 mm length of bolt of extruded section and fixed complete all as specified and as directed.

S&F in repair 300 mm size mild steel rat tail rod pattern door springs ISI marked including roller & roller plate etc complete all as specified and as directed.

S&F in repair mild steel mortice lock vertical type100 mm size 4-lever with two keys complete all as specified and as directed.

Taking down aluminium shutters and dismantiling stiles and rails including glass panes/particle board carefully, Refabricating and refixing in frame position using all old material including neoprene replacement of required packing, cleats, screws complete all as specified and as directed

S&F in reapirs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F in repair floor door stopper of aluminium anodised body and tengue, anodised with hard drwan steel spring overall length of cover plate 140 mm complete all as specfied and as directed.

S&F in repair Aluminium (die cast) body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and as directed.

S&F in repair mild steel handle for steel window etc complete all as specified and as directed.

M&L for spot welding in repair n exc 2.5 cm in length thickness of metal to be welded not exc 6mm for fixing hinges/handle/bolts/helical door spring to iron surfaces etc. complete all as specified and as directed.

S&F in repair 25 mm dia stainless steel drapery rod cut to size and fixed in position including end caps, roller and brackets fixed to wall complete all as specified and as directed.

S&F in repair 18/19 mm thick block board grade Ist quality ,exterior grade commercial type fixed with screw to timber frame work complete all as specified and as directed.

S&F in repair 100 mmsize aluminium anodised Hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F in repair aluminium anodized barrel tower bolts 75 mm length of bolt of extruded section and fixed complete all as specified and as directed.

S&F Continuous (piano) hinges width of flaps 40 mm (when opened) mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F in repair Door Seal fixed to door bottom rail with screws complete all as specified and as directed.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for Brick work with old size fly ash Bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Brick work with old size sub class 'B' brick straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls,concrete surface etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for rendering 15 mm thick on other than fair faces brick wall or concrete surface in cement mortar 1:6 finished even & smooth without using extra cement complete all as specified and as directed.

M&L rendering 15mm thick on fair face of brick work/concrete in CM 1:4 and finishing surface even and fair by mixing liquid water proofing compound as per manufacturers instructions complete all as specified and as directed. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

Supply only liquid water proofing compound hydroseal-W+ /Dr Fixit or eqivalent (for plaster hardening, to contol efflorescence & fungal growth) as approved by Engineer-in-charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of Alkali resistant primer complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F anodised aluminium snap grid(size605x605mm) frame work for false ceiling including Hangers 6 mm dia GI (upto 1200 mm length) adusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as directed.

M&L for 4 mm thick non-asbestos fibre cement building board having fire resistance & moisture resistance properties fixed to aluminium grid with screw complete all as specified and as directed. Make : Everest/Charminar/Uppal

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for coloured Non skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchl aid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for coloured Glazed ceramic tiles on vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match fixed over and including 10 mm thick backing coat of cement mortar in 1:4 complete all as specified and directed.

S&F in repair stainless steel handles 125 mm size for kitchen cabinet shutters complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness (except ceramic tiles) in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for 20 mm thick Granite slab work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like laid over and including 20mm thick screed bed in cement mortar 1:4 and pointing in white cement (1:2 )using marble dust with admixture of pigment to match with shade of granite, including rounded/half rounded edge and providing hole for gas pipe in pre-cast slab as well as in granite slab of cooking platform complete all as specified and as directed.

M&L for 50 mm thick sand stone slabs in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4 complete all as specified and directed.

M&L for Mild steel Joist, channel, angle, or tee sections, fixed independently, as support of Sandstone slab for chajjas of ground floor and first floor complete all as specified and as directed.

Taking down steel rolling shutter and repair to shutter by greasing, oiling, painting etc. size of shutter n exc 15 Sqm each including fixing in the same opening complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for light shade double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

Demolition of concrete of any description and position not otherwise specifically provided for as in sunken floor etc. complete all as specified and as directed.

M&L for providing cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) in lintel upto 1.5 m span, coping, kerbs, stops, cills, bed plate and the like complete all as specified and as diected.

M&L for cement concrete 1:7:12 type F2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering complete all as specified and as directed. Note : Make of the material 'Smart Care damp block 2K' of Asian paints or equivalent from Dr Fixit, STP, CICA etc. as approved by GE

M&L for 25 mm thick cement concrete 1:2:4 , type B-1 (using 20 mm graded aggregate) as in sub bases, sub-floor, floors and paving complete all as specified and directed.

M&L for 75 mm thick cement concrete type D-2, 1:5:10 (using 40 mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of concrete as on ceiling in cement mortar 1:3 finished even & fair complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

S&F in repairs high density polythene pipe 32 mm bore (HDPE) of pressure @ 6 Kg/Sqcm laid in trenches complete all as specified and as directed.

S&F in repair PVC floor trap plain 75 mm dia of outlet with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repair Salt-glazed stoneware gully traps of size 150mmx 100mm, square or round mouthed, tvpe 'P' and setting and jointing in cement mortar 1:1 complete all as specified and as directed.

S&F in repair 110mm bore PVC (SWR ) vent cowl complete all as specified and as specified.

S&F in repair 110 mm bore PVC (SWR) bends any radius with oval access door complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) bends with access door any radius complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) plain bends any radius complete all as specified and as directed.

S&F in repair 110mm bore PVC (SWR) junction (Single T) equal or unequal complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F in repair Pillar Cock with extended Lever Handle for Medical use, fixed to wash basin/sink complete all as specified and as directed. Make : Jaquar Cat No. FLR-5031N or equivalent makes as specified in the list of makes.

S&F in repair Single Lever Elbow Basin Mixer with 150 mm long Braided hoses extended operating Lever for Surgical purpose complete all as specified and as directed. Make : Jaquar Cat No.FLR-5033B or equivalent makes as specified in the list of makes.

S&F in repair Toilet Roll Holder fixing to wall complete all as specified and as directed. Make : Jaquar Cat No.ACN-1151N or equivalent makes as specified in the list of makes.

S&F in repair Single Lever Basin Mixer with 450 mm long braided hoses complete all as specified and as directed. Make : Jaquar Cat No.FLR-5001B or equivalent makes as specified in the list of makes.

S&F in repair Towel Rack 600 mm long with lower Hangers complete all as specified and as directed. Make : Jaquar Cat No.ACN-1181N or equivalent makes as specified in the list of makes.

S&F in repair Wall mixer with 115mm long Bend pipe, connecting legs & wall Flange complete all as specified and as directed. Make : Jaquar Cat No.CON-281KN or equivalent makes as specified in the list of makes.

S&F in repair Towel Rail 600 mm long complete all as specified and as directed. Make : Jaquar Cat No.ACN-1111NM or equivalent makes as specified in the list of makes.

Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing or removal from site complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing or removal from site complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth of brick walls complete all as specified and as directed.

Refixing old steel tubing15 mm bore and connections in new or old position ( wall, ceiling ,floors etc )complete all as specified and as directed.

Refixing old steel tubing 20 mm bore and connections in new or old position ( wall, ceiling ,floors etc )complete all as specified and as directed.

Supplying & fixing steel tubing ,galvanised, medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.

Supplying & fixing steel tubing ,galvanised, medium grade 20 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.

S&F in repair long body bib taps cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipes15 mm bore dia complete all as specified and as directe.

S&F in repair Bib tap standard of PTMT any colour high pressure screwed for iron pipe 15 mm bore dia (minimum weight 90gms) and fixed complete all as specifed and as directed.

S&F in repair stop/Gate valve, cast copper alloy, chromium plated, fancy type with crutch or butter fly handle, screwed down, screwed both end for iron pipes 15 mm dia bore complete all specified and as directed.

S&F in repairs stop valve cast copper alloy,fancy type, chromium plated with long shank and cup (Concealed type)screwed down, screwed both ends for iron pipe 15 mm dia bore complete all as specified and as directed.

S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm including brackets,waste fitting 32 mm brass chrimium plated, pillar tap cast copper alloy chromium plated, fancy type with capstan heads,screwed down high pressure,with or without letters Hot or Cold with long screwed shank and fly -nuts, screwed for iron pipe 15 mm bore dia complete all as specified and as directed.

S&F in repair PVC cabinet with mirror, size 350 mm x 450 mm, fixed to wall with screws complete all as specified and as directed. Make : Prayag Cat No 551 or equivalent of make Commander / Neelkamal / Polytuff

S&F in repair pillar tap cast copper alloy chromium plated, fancy type with capstan heads,screwed down high pressure,with or without letters Hot or Cold with long screwed shank and fly -nuts, screwed for iron pipe 15 mm bore dia complete all as specified and as directed.

S&F in repair 32 mm bore PVC flexible waste pipe 750 mm long for urinals and wash basin complete all as specified and as directed.

S&F in repair sheet glass shelf assembly consiting of 5.5 mm sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F in repairs corner racks with glass of size 300x300mmx8mm thick, bevelled on edges with two brackets CP complete all as directed.

S&F Swivel shower of PTMT any colour for fixing with 15mm pipe (minimum weight 40gms) complete all as specified and as directed.

S&F Shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (minimum weight 40gms) complete all as specified and as directed.

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, complete all specified and as directed.

S&F in repair colour european type combination pattern WC casket type christinna with mounted flushing cistern,PVC connection,seat cover and jointed to sewage pipe complete all specified and as directed. Make : CERA cat No. S1013119 or equivalent approved makes given under list of makes.

S&F in repairs PVC Jet for EWC complete set complete all as specified and as directed .

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging devices complete all as specified and as directed.

S & F in repairs Viterous china squatting pan, Órissa' pattern, size 580 x 440mm white, with integral foot rests including connection and fitting to trap, and to flushing pipe complete and making good to wall or floor tilling to match the existing complete all as specified and as directed.

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

S&F in repairs PVC syphon kit complete for low level flushing cistern complete all as specified and as directed.

S&F in repairs PVC (White) valve less syphonic action type, flushing cistern10 ltrs low level with inlet ball valve float, handle, aluminium brackets for bottom support fixing with gutties embeded in wall with drilling machine etc complete all as specified and as directed.

S&F in repair two way angle cock cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes 15 mm bore dia complete all as specified and as directed.

S&F in repair Health faucet of superior quality ABS body with 8 mm dia 1.2 m long flexible tube and wall hook complete all as specified and as directed.

S&F in repair waste coupling of 32 mm size chromium plated for glazed ware sink basins, etc with long screwed shanks and fly nuts flanges end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repair waste coupling of 40 mm size brass chromium plated for sink, etc with long screwed shanks and fly nuts flanges end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repair PVC connections 15 mm size with PTMT nuts at both end of 600 mm long complete all as specified and as directed.

S&F in repairs stainless steel towel rail 600 mm long 20 mm dia fixed with steel screw etc complete all as specified and as directed.

S&F in repair stainless soap dish fixed to wall complete all as specified and as directed.

S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20 mm bore dia (Minimum weight 210 gms) complete all as specified and as directed.

S&F in repairs cover for HDPE water tank of capacity 500/1000 ltrs rotating type including frame and nut bolt complete all as specified and as directed.

S&F in repairs mild steel chromium plated grating (round) 125 mm dia fixed over floor/nahani trap (with hole/without hole) complete all as specified and as directed.

Supply and fix in repair 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20 mm bore dia complete all as specified and as directed.

Supply and fix in repair 1000 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20 mm bore dia complete all as specified and as directed.

Cleaning of HDPE tank of capacity exc 250 & n,exc 500 litres by Flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 metre and depositing where directed complete all as specified and as directed.

All as per item Serial No 148 but capacity of tank exc 500 litre but not exc. 1000 litres.

S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes 20 mm bore dia complete all as specified and as directed.

S&F in repair stainless steel kitchen plate rack of size 31" x 30" x 10" deep, fabricated with 0.63 mm sheet fixed in position on wall complete all as specified and as directed. Make : Prayag cat No P-346 or equivalent of make specified in Appx 'B'

S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repair 15-20mm (20 mm outer dia) GI reducer complete all as specified and as directed.

S&F in repair 20 mm bore GI Union complete all as specified and as directed.

S&F in repair 20 mm bore GI Elbow complete all as specified and as directed.

S&F in repair 20 mm bore GI socket complete all as specified and as directed.

S&F in repair 15 mm bore GI Tee complete all as specified and as directed.

S&F in repair 15 mm bore GI Union complete all as specified and as directed.

S&F in repair 15 mm bore GI Elbow complete all as specified and as directed.

S&F in repair 15 mm bore GI socket complete all as specified and as directed.

S&F in repair 15 mm bore 150 mm long Nipple all as specified and as directed.

S&F in repair 15 mmbore 100 mm long Nipple all as specified and as directed.

S&F in repairs 15 mm bore GI nipple fully threaded with two numbers check nuts and washers for PVC tank, 100mm long to PVC tank with back nut and washers for inlet and outlet pipe complete all as specified and as directed.

S&F in repairs 20 mm bore GI nipple fully threaded with two numbers check nuts and washers for PVC tank, 100mm long to PVC tank with back nut and washers for inlet and outlet pipe complete all as specified and as directed.

B R ENTERPRISES

M/s Hoti Lal Contractor

Ms Kamal Kant Agarwal

M/s Orient Traders