REPAIR REPLACEMENT OF PATHWAY AND CERTAIN MISC ITEMS IN ZONE A UNDER AOR OF AGE BR DETT B OF GE 862 EWS

Amount

Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thickness below or above the ground level, complete all as specified and directed.

M&L for 100mm thick plain cement concrete 1:2:4, type B-2 using 40mm graded crushed stone aggregates as in hard standing and footpath, complete all as specified and directed.

M&L for 75mm plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in sub base for tiling, complete all as specified and directed.

M&L for coloured chequered cement concrete tiles of size 30 cm x 30cm x 25 mm thick set, jointed in neat cement slurry in floor and pointed in white or coloured (apporved by GE) cement to match the shade of tiles laid over and including 20 mm thick screed bed in cement mortar 1:6 after dismantling of old unserviceable tiles etc and removing rubbish off the premises complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block of any shape and size approved by GE confirming to (IS:15658-2006) of 60mm thick, M-35 grade single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine in equal propotion of grey and coloured tile to make a pattern as directed as in hardstanding,with grey cement, laid tightly over & including 20-25mm thick dry sand cushion (compacted) and joints filled with dry sand, colour and pattern as approved by GE, including dismantling of old paver block complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block of any shape and size approved by GE confirming to (IS:15658-2006) of 80mm thick, M-35 grade, single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine in equal propotion of grey and coloured tile to make a pattern, as in hardstanding, with grey cement, laid tightly over & including 20-25mm thick dry sand cushion (compacted) and joints filled with dry sand, colour and pattern as approved by GE, including dismantling of old paver block complete all as specified and directed.

M&L for digital vetrified exterior parking tile of size 300 x 300mm and 12 mm thick of any colour pattern (colour approved by GE) as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to matched, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4 after dismantling old unserviceable of tiles, including removing rubbish off the premises complete all as specified and directed.

M&L for 12mm thick Heavy duty outdoor vitrified tiles of size 600 x 600mm as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to matched, the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4 after dismantling of old unserviceable tiles, complete all as specified and directed.

M&L for machine cut kota stone slab (mirror polished) flooring 18-20mm thick in floors and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 15 mm thick in cement mortar 1:4 after dismantling of old unserviceable tiles / kota stone, complete all as specified and directed.

M&L for 18-20mm thick black or any other colour granite (of any type) work (table rubbed and polished) in floors, steps, Jambs, pillars, window cills, cooking platforms and like including back coat of cement plaster or screed bed with standard specification as per site requirement, set and pointed in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite after dismantling of old unserviceable granite stone slab of any size, complete all as specified and directed.

Demolition of reinforced cement concrete in ground floor and paving n exc 15 cm thickness below or above the ground level complete all as specified and directed.

M&L for precast reinforced cement concrete 1:2:4, type B-1 (using 20mm grade crushed stone aggreagte) as in landing, cover slab, manhole cover, chajjas etc and similar articles with plain faces, set in cement mortar 1:6, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6, complete all as specified and directed.

Description all as per item No. 15 above but except bricks Note: Old brick retrieved from demolition shall be used.

M&L for plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in quoin blocks, strings courses, copings, kneelers, apex stone, bed plated, bed blocck foe embedding hold fasts, surface channel, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work as required, complete all as specified and directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on stone walls or other than fair faces of brick walls finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for cement concrete 1:2:4, type B-1 (using 20mm grade crushed stone aggreagte) as in surface channels and drains, complete all as specified and directed.

M&L for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/ stopped ends, complete all as specified and directed.

M&L for form work to faces of walls retaining walls, drains and similar work etc, vertical or to batter rough finished surface of comcrete in flat, complete all as specified and directed.

SATVIR GUPTA ENGINEER and CONTRACTOR (BID ID -3348648)

KANWAL KUMAR GUPTA (BID ID -3349560)

M/S Ramesh Chander Gandotra & Sons (BID ID -3346121)

BAKSHI DEVI DASS AND SONS (BID ID -3348266)

ABINASHI ENTERPRISES (BID ID -3348045)