Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹3.4 L
Closing Date
13 Jan 2025, 11:00 pmClosed
Chamundeshwari Electricity Supply Corporation Limited
Sandeep Kumar T R
9663599999
Special repairs to MPL office building at Sri Harsh Road, Mysuru
CESCOM/2024-25/OW/WORK_INDENT117/CALL-2
CESCOM/2024-25/OW/WORK_INDENT117/CALL-2
Open
Other Works
Two Tender Document System(Two Cover)
CESCOM Superintending Engineer Procurement Corporate Office Mysuru
9 documents required · 9 mandatory
Satisfactorily completed as a prime contractor at least one similar nature of work like Repair & maintenance of buildings in any one of the above financial years amounting to Rs.114.27 lakhs in any of the Government/KPTCL/ ESCOMS/Public undertaking/ Order copies/ certificates issued from the cadre of not less than the rank of Executive Engineer shall be scanned and uploaded.
Executed in any one year the following minimum quantities of work PCC/RCC-72.0Cum,Plastering-3600.0Sqm,WaterProof Treatment-1760.0Sqm,Painting-7200.0Sqm,MS Grill-480.0Sqm,Truss Work-3200.0Kgs
The Bidder shall submit valid EPF registration certificate. . Scanned notarized copies shall be uploaded for the period of last 3months prior to up loadation of the bid
The Bidder shall submit valid EPF registration certificate
Owning the following key and critical equipment for this work
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
Self-declaration letter shall be uploaded by the bidder stating that He or She shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by the Central/State Govt. or public sector undertaking of India
The bidder shall be registered KPWD/ CPWD of appropriate Class & above contractor
Achieved, in at least two financial years, a minimum annual financial turnover of Rs.457.08 lakhs (in all classes of civil engineering construction works only). Reports on the financial standing of the tenderer, such as profit and loss statements, Balance sheets, Annual turnover certificate certified by chartered Accountant and auditors reports for the last 5 years i.e. 2019-20 to 2023-24 shall be uploaded
The line of credit should be produced not less than Rs.68.56 Lakhs drawn on or after 07.08.2024 in the name of General Manager(Procurement), Corporate office, CESC, Mysuru
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years
List of Financial Resources with Certificates
If the tenderer quotes less than the amount put to tender, the difference amount shall be paid in term of D.D drawn in favour of General Manager(Procurement), Corporate office, CESC, Mysuru before issue of the work-order
The bidder shall submit valid IT PAN card and Latest ITR-V Form
The bidder who intends to participate in the tender process should compulsory visit the site & obtain site visit certificate from the Engineer in-charge & same to be uploaded
₹5,000
₹3.4 L
30 Dec 2024
30 Dec 2024
15 Jan 2025
13 Jan 2025
6 Jan 2025
Special repairs to MPL office building at Sri Harsh Road, Mysuru
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engi...
Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Repairs to plaster in patches of 2.5 sqm and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall includ...
Providing waterproof treatment to roof slab using 2 coats of acrylic co polymer elastomeric ISOPROOF sealer & protector. The surface shall be prepared free of tar, dust, fungus, loose particles etc., ...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing Waterproof treatment to the cracks using 1 coat of bondcoat of SBR latex and Cement at the ratio 1:1 and then preparing Cement Mortar of 1:3 admixed with SBR latex at a dosage of 15% of Ceme...
Providing and applying white cement based putty of average thick ness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per s...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of ap proved brand and manufacture, including applying additional coats wherever re...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...
Painting with synthetic enamel paint of approved brand and manu facture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appr...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a prim ing coat of approved steel primer using structural steel e...
Providing and installing of pre painted Galvolume iron Trapezoidal profiled sheet of approved make 1060 mm width (1000 mm cover width), 28-30 mm crest height with crest distance of 200 mm c/c with 2 r...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gree...
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitti...
Providing and laying heavy duty cobble stones 75mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength...
Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm...
Providing & fixing in position fully glazed for window shutters with teak wood stiles & rails of 35mm thick 75mm wide in single shutters with 4mm thick plain glass fixed with wooden beading including ...
Providing, fabricating and fixing partition frame work consisting of 50mm x 50mm sal wood frame work at spacing not exceeding 600mm clc fixed to the bottom and ceiling, the partition shall be skinned ...
Providing and fixing Cubical workstations consisting of wings made out of 75 mm thick MS CRCA powder coated tile based system for main and return spine, Top tile finish 8 mm thick MDF covered with fab...
b T Type 2 wings
3D) Size : 1500 mmW x 1500mm x D x 1200 mm ht :
Providing and fixing conferance table consisting of 25 mm thick PLPB table topedge bounded, 25 mm thick PLPB with edge bonded End table, 18 mm thick PLPB with edge bonded Modesty, Hardware-Minifix a...
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...
Providing and fixing M.S. Grill over existing compound wall as per Chief Architect drawing No.12686, using 16mm x 16mm M.S. Square rod at 150mm c/c spacing and 6mm x 40mm M.S. flats at horizontal and ...
Providing and fixing Automatic type rolling shutters of approved make out of 18 guage, 75mm wide cold rolled steel laths of convex corrugation, with side guides and bottom rail, with interlocking arra...
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...
Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for not and cold water supply including all CPVC plain and brass threaded fittings inc...
Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, includin...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
Providing and fixing on wall surface. 4.0 kg / sq.cm H.D.P.E. rain down water pipes 110mm outer dia. approved make and brand with necessary specials like shoes, bends and offsets fixed with iron clamp...
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Supplying heavy gauge PVC conduit pipe 19/20 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. Th...
25mm dia 2 mm thick
Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using copper PVC insulated multistrand 2X1.5 Sqmm copper wire with a 6 Amps flush type SP control switch shall be fixed...
b Medium point above 3 Mtrs Upto 6 Mtrs from tapping point to outlet via switch
c Long point above 6 Mtrs Upto 10 Mtrs from tapping point to outlet via switch
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting
in Brick/Stone/C.C wall ...
Supplying and fixing PVC/metal conduit Deep junction box 19/20mm deep junction box
25mm deep junction box
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Wiring for lighting/power circuit using one of PVC insulated 1100V grade,multistrand Copper conductor single core cable in open or concealed system of wiring (a) 1.5 Sqmm
Supplying and fixing of modular switch/socket/stepped electronic regulator/dimmer/telephone socket etc on existing modular switch plate.(P-8;I-18) (a) 6 Amps 3 way socket
Stepped fan regulator
32 Amps DP switch
6/16A Universal Socket
TV/Telephone Socket
6Amps one way Switch
Supplying capacitor type ceiling fan complete with down rod blades,shackle, canopies etc, for operation on 230 V, 50 cycles. Single phaseAC supply conforming to ISS-374- 1979 and with double ball bear...
Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board. (16-25 A 2 pole)
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 pha...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the mter board using 40mm dia 2.90mm thick GI pipe 2.5metr long buried in a pit. The pit should ...
Supplying of LT UG cables having aluminium conductor PVC insulated sheathed, galvanised, steel wire/steel tape armoured cable with PVC outer sheathing 1.1 KV class (conforming to SO 1554) 4 core 16 s...
Supplying and fixing of class A GI pipe on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class 40 mm
Supply and fixing of Panel Board for fixing of indipendent meters for residencial purpose including cost of labour, transporatation, loading & Unloading charges etc complete as per the directions of ...
Providing and fixing 1 HP water pump including cost of labour, transporatation, loading & Unloading charges etc complete as per the directions of the Engineer in charge of the work
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
Supplying of 1x4' feet - PVC Batten with integrated LED tube 20/22 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V at 50/60Hz ...
Supplying of recess mounting non integral type LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI...
Providing and fixing CESC LOGO with & LED electrical pattren light along with name board made out of acrylic sheet of size 9 mtr x 1.2 mtr
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW-4_MPL.docx
Tender Document • 0.15 MB
MPL NIT.docx
Tender Document • 0.06 MB
Section 3 Repairs to MPL .docx
Others - Compulsory Formats • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].