PROVN OF CERTAIN MINOR REVENUE LBW AND SRW WORKS AT VARIOUS LOACATIONS OF LUCKNOW CANTT UNDER GE WEST LUCKNOW

Amount

Surface excavation n. exc 15 cm deep and gettingout in soft /loose soil.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth etc for foundation etc and getting out in any type of soil complete all as specified & directed.

Excavating in trenches, not exceeding 1.5m wide and exceeding 1.5m but not exceeding 3.0m in depth etc for foundation etc and getting out in any type of soil complete all as specified & directed.

M&L for Cement concret Type B2 1:2:4 (40 mm graded aggregate) in foundation,walls or in walls or any thickness, size or shape including columns, pillar and posts (including caps and bases) all as specified.

M&L for Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundations, filling and mass concrete all as specified & directed.

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete all as specified & directed.

M & L for brick work using fly ash brick conforming to IS-12894:2002, Modular, class designation 7.5, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:6) , complete, all as specified and directed.

M & L for brick work using fly ash brick conforming to IS-12894:2002, Modular, class designation 7.5, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:4) , complete, all as specified and directed.

M&L 40 mm thick damp proof course in 1:2:4, type B-0 to horizontal or vertical surfaces incl necessary form work.

M&L RCC M-25, using 20mm graded stone aggregate as in foundations, including rafts,footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter of rough finished of concrete surface.

M&L RCC M-25 (20 MM graded stone ) as in Columns, pillars, piers, posts and struts complete all as specified.

M&LFormwork to sides of pillars,posts, struts, piers, columns and stanchions.complete of rough finished of concrete surface all as specified and directed.

M&L RCC M-25, (20 MM graded stone ) as in Beams, cantilevers, bressummers,lintels over 1.5m span

Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelvesincluding sup- ports, overhangs,etc. also splays between floors and beams, etc.of rough finished surfaces of concrete flat.

M&L RCC M-25 (20 MM graded stone ) as in Chajjas

Formwork to chullah hoods, chajjas,troughs and similar items including edges of rough finished of concrete surfaces complete all as specified and directed.

M&L RCC M-25 (20 MM graded stone ) as Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like

S & F for MS TMT bars 10 mm dia and over , cut to length , bent to shape required incl cranking bending spirally for hooping for coloumn hooking ends and binding with and incl mild steel wire annealed not less than 0.9mm dia or securing with clips .

All as per Srl item No 19 above here-in-before but but 8 mm dia in stirrups, spacers and binders etc completed.

M & L for 15mm thick rendering cement plastering on fair faces of brick work or concrete surfaces 1:4 and finished even and smooth without using extra cement. mixed with WPC as specified. (WPC measured and paid separatly)

M & L for 15mm thick rendering cement plastering on fair faces of brick work or concrete surfaces 1:4 and finished even and smooth without using extra cement.

M&L Rendering 15 mm thick cement plaster in CM 1:6 with on other than fair faces of brick work or concrete surfaces of walls/facias complete all as specified.

Supply only integral water proofing coumpound conforming to IS-2645 complete all as specified and directed.

M&L Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including Providing and applying 3mm thick Exterior wall care putty on wall complete all as specified.

M&L preparing surface plastered or un plastered surface and applying distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work with priming plastered and other surfaces with alkali?resistant priming paincomplete all as specifed.

M&L 3mm thick wall care putty on wall complete all as specfied.

M&L hard core of broken bricks of gauge n.exc 63 mm deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to true surface complete all as specified.

M & L for 75 mm thick PCC 1:4:8, type D2( using 40mm graded stone aggrtegate) as in sub base etc complete all as specified and directed.

M & L for 100 mm thick PCC 1:4:8, type D2( using 40mm graded stone aggrtegate) as in sub base etc complete all as specified and directed.

S&F Non skid joint free coloured ceramic tiles 7 to 8mm thick (square / rectangular ) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors conforming to IS-13712 grade B-II-(a), set and jointed in neat cement slurry and pointed in white or coloured cement to match including the surface 15 mm thick screed bed or bedding layer of mortar in CM 1:6 complete all as specified.

M&L for glazed ceramic tiles (coloured) 350x250x7mm/450 x 350 x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering (as screed bed) in cement & sand mortar 1:4, complete . all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of frame size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant.

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)& 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer?In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&F 4.0 mm thick figured glass,pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane.

S&F butt hinges of size 100 mm medium weight, stainless steel ISI marked complete all as specified.

S&F Brass handles,150mm thick cast type, polished bright complete all as specified.

S&F 150 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified

S&F 300 mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete, all as specified.

S&F vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified and directed.

S&F vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified and directed.

S&F PVC valveless syphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed.

S&F long body 15mm bore bib tap(fancy type), cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.

S&F CP angle valve long body for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type fixed as in repair. complete all as specified and directed.

S&F in repair fancy type pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flynuts, screwed for iron pipes and fixed for 15mm dia complete all as specified and directed.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete as specified superior quality complete all as specified and directed.

S & F stainless steel toilet paper holder Recessed type with wall hook bracket etc, complete set of superior quality.

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 190gms)

S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 600 mm long.-

S & F glass corner shelves fancy type 6mm thick size and fixed over CP brass brackets all as specified and directed.

S & F Vitreous China bowl urinal flat back, size of 430 x 370 x 340 mm (minimum) mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe

S&F Urinal spreader of CP for fixing with 15 mm dia pipe.

S & F stainless peg sets consisting 06 Nos of pegs of approved quality complete all as specified and as directed.

S&F Rotational moulded polyethene Water Storage Tanks 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I etc complete.

S&F Ball Valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed pf bore of dia of pipe 20 mm (minimum wt 210 gm).

S&F PVC 75 mm bore floor traps 'P' or 'S' type fixed in floor with cement complete all as specified and directed.

M&L Supplying and laying of CPVC pipes of outer diameter 20 mm,SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls complete all as specified .

M&L Supplying and laying of CPVC pipes of outer diameter 25 mm,SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls complete all as specified .

S&F CPVC Brass Elbow 20 mm dia

S&F CPVC Brass Elbow 25 mm dia

S&F CPVC Brass Elbow (3/4 X ½) 20 mm dia

S&F CPVC Brass Tee 20 mm dia

S&F CPVC Brass Tee 25 mm dia

S&F CPVC Male Brass Threaded Adaptor (MTA/ MBTA) )20 mm dia

S&F CPVC Male Brass Threaded Adaptor (MTA/ MBTA) )25 mm dia

S&F CPVC Female Brass Threaded Adaptor (FTA/ FBTA)20 mm dia

S&F CPVC Female Brass Threaded Adaptor (FTA/ FBTA)25 mm dia

S&F CPVC Tank Adaptor 25 mm dia

S&F CPVC UNION 20 mm dia

S&F CPVC UNION 25 mm dia

M&L 75 MM Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.

M&L 100 MM Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.

M&L for rubber moulded coloured Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors as with mixer of white & grey cement in equal proportion and no pigment incl 20 mm thick screed bed bedding in CM 1:4 complete all as specified and directed.

M & L for Providing cement concrete 1:2:4, Type B-1 (20 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges

M&L Precast reinforced Cement Concrete Slab for manhole cover of type C-1, 1:3:6 using 20 mm graded crushed stone agg all as specified.

M&L 150 mm dia Sail-glazed stoneware drain pipes laid in trenches and jointed as specified

M&L concrete bed to drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested; using cement concrete 1:3:6 type C2 as in 150 mm dia complete all as specifed and directed.

S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F 75 mm bore PVC (SWR) pipes, single socketed in any length witlh rubbeer ring jionts, fixed to walls with PVC holding clamps complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radious complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radious complete all as specified and directed.

S&F 110 mm PVC (SWR) branch piece,double (double Y) equal or unequal complete all as specified and directed.

M&L On site Hume Pipe septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 10 Users.

M&L for provn of roof treatment with polymeric water proofing membrane all as given below:- (a) Applying a coat of bituminous primer conforming to IS: 3384-1986 @ 0.25 Iit/sqm on prepared surface and allowed to dry. (b) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (c) M&L for applying two coats of aluminium paint on membrane @ 0.10 Kg/Sqm (each coat) complete all as specified and directed.

Surface dressing n exc 15 cm deep and getting out in soft/ loose soil complete all as specified

S&F steel tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161 -1979 grade St-240 complete all as specified.

M & L Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

M & L Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

M & L for preparation of new steel surfaces of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified

Removing of material exc. 250m but n exc 500 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Returning filling in of excavated any type soil including spreading leveling watering and well ramming in layers n exc 25 cm thick all as specified and directed by Engineer-in-Charge.

M&L for Preparation of newly plastered wall surface and applying two coat of cement base paint over a coat of alkali-resistant priming paint all complete all as specified.

S&F Rotational moulded polyethlene water storage tanks of capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20/ 25 mm dia ball PVC valve high pressure with polythene float and dismantling of existing PVC tank of any capacity complete all as specified.

S&F 15 mm bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified.

S&F 20 mm bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

S & F Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe all as specified

M & L for cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified.

Excavation over area no exc 1.5m deep and getting out in any type of soil complete all as specfied and directed

M & L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.

M&L for 50mm thick plain Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring incl finishing the surface even and smooth without using extra cement complete all as specified

M&L for 75mm thick plain Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in plinth protection incl finishing the surface even and smooth without using extra cement complete all as specified

M&L for Flush pointing to brick walls in CM 1:4 complete all as specified.

M&L for keyed pointing to brick walls in CM 1:4 complete all as specified.

M&L for Angle iron, Joist, channel, angle, or tee sections, Fe-410-W(Gde?E-250) quality 'B', fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified.

M&L for Mild steel 1.25mm thick, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M&L for steel Framed work Fe 410-W(Gde?E- 250) quality?A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting ?or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for Brick work Laid flat in floor , Bedded, jointed in M (1:6) and pointed in CM (1:3) complete all as specified and directed

Ditto as item No 110 above but laid on edge

S & F 600 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars with Concrete bed to drain pipes complete all speciified and directed

S & F 450 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars with Concrete bed to drain pipes complete all speciified and directed

M & L PCC 1:2:4 type B 0 (using 12.50/20 mm graded stone aggregate) as in coping, benching or kerb etc complete all as specified and directed

M&L, for applying three coat of white wash including preparing new plaster surface of wall complete all speciified and directed

Extra for forming fair finished drain or channel n exc 40cm inner girth in cement concret, using extra cement, complete all speciified and directed

Excavating in post holes (or similar holes) of soft soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm all as specifed and directed.

M&L for sand cushion and joint filled with fine sand including leveling tamping & sweeping etc all as specified & directed.

M & L for providing and laying of Machine pressed precast concrete rouber moulded interlocking paver block any shape and size of 60mm thickness, M-35 Grade as specified & directed.

M & L for providing and laying of rubberf moulded Machine pressed precast concrete rouber moulded interlocking paver block any shape and size of 100mm thickness, M-50 Grade as specified & directed.

M & L for Glass dividing strips, 3 mm thick and 28 mm width of strip complete all as specified and directed.

S & F of posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm complete all as specified & directed.

M&L for preparation of newly plastered surface of wall and applying two coats of Oil Bound Distemper complete all as specified and as directed

M&L for preparation of newly plastered surface of ceiling and applying three coats of whitewash complete all as specified and as directed

Earth filling under floor Spreading and levelling in layers n exc. 25 cm thick ramming including watering as required, complete all as specified & directed.

Roughening of surface of old concrete floor by picking, sweeping clean and washing down with water to romove dust all as specified and directed by Engr-in-Charge

M&L of Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and directed

All as per above item No-129 but on vertical surfaces including 10mm thick plaser in CM 1:4 , complete all as specified and as directed.

M & L for 5mm thick in ceiling rendering in CM (1:4) finished even and fair (without using extra cement)incliding preparation of new surface of ceiling applying three coats of white wash complete all as speciified and directed.

M & L for 5mm thick in top of Roof rendering in CM (1:4) finished even and fair and neeru finish to plastering as specified mixed with water proofing compound as per manufacturar instruction complete all as speciified and directed.

Supply only iliquid water proofing coumpound conforming to IS 2645-2003

M & L for cutting and chaseing in brick wall for concealed GI tubing and making good in CM 1:4 n.exc 10 cm in girth complete all as specified and directed

Supply & Fixing in repair Leaver type Stop Ball valve screwed both ends to 20mm bore pipe complete all as specified.

S&F in position rotational moulded polyethylene water storage tanks 300 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as directed

S & F light coloured vitreous china WHB of 630mm x 450mm (minimum) on new bracket excluding taps wast china and plug including brackets coupling, waste pipe etc complete all as specified and directed.

S&F Vitreous China wash down water closet pan, pedestal pattern, white, with 'P' or 'S' trap, excluding flushing cistern and flush pipe, with plastic water closet seat cover, white, closed pattern with flat bottom and cover, fixed with MS chromium plated hinging deviceincluding connection to drain pipe (or outgoing pipe) and to flushing pipe etc. and making good to floor complete all as specified and directed.

S & F 15mm bore PVC connection 450mm long with PTMT nuts and washer as directed.

S & F 15 mm bore pillar taps/Bib cock CP Brass Self-closing taps,chro-mium plated Brass,screwed for iron pipe and fixed complete all as specified and directed

S & F 15mm bore, fancy type shower rose, chromium plated complete all as specified and directed.

Cutting into existing man holes for connection new drains internal dia of pipe 150 mm, making good to pipe and rendering cutting out existing benching for and forming branch channels (1/2 round or 3/4 section) min cement concrete 1 : 2 : 4 type B1 smooth finished and reforming benching complete all as specified and directed.

S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube etc all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid both side lamination plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.complete all as specified and directed.

S & F in Anodised aluminium powder coating (minimum thickness of powder coating 50 micron) frame for doors, windows , ventilators with one or more rebates including joining cleat for fixing , pin headed glass, loured jali, ss wire mesh etc complete all as specified and directed.

S & F Mild Stee c.p. handle fabricated type 150mm long as directed.

S & F 200mm long Mild Steel c.p. barrel tower bolts of extruded section complete all as specified and directed

S & F Mild Steel c.p. sliding door bolt 250mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified.

S&F for MS steel work as in rectangular purlins, rafters and similar item complete including cutting, griding, welding etc as required (F410 Gde E-250) complete all as specified and directed.

Material and Labour Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including screed bed or bedding layer 20mm th in cement mortar 1:4 complete all as specified and directed.

Cutting holes in brick walls built in cement mortar or cement lime mortar to a depth measured from the face of jamb exceeding half brick but not exceeding one brick and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B1 as required for fixing purlins,rafters etc.

S&F 8 to 10 mm dia anchor fastner of lentgh ecx 75 mm but n. exc 150 long including drilling holes in concrete/masonary walls/ stucture using electrically operated drill machine compete all as specified and directed at site. Note-Rate quoted includes cost of one 3 mm thick GI washer and one hexagonal GI nut per bolt.

S & F Mild steel framed work such as grills, grating, framed guard bars and similar work conforming to Fe 290 Gde E -165 complete all as specified and directed.

M & L for 20mm thick granite stone slab as in cooking platform,window cill over 15mm thick screed bed in CM 1:4 including cutting, polishing & rubbing and including rounding of exposed edges complete all as specified and direceted.

S & F PVC (SWR) single TEE equal 110mm dia.

S & F 15 mm bore CP brass Central Hole Basin/sink mixer fixed to GI pipe with pvc connection pipecomplete all as specified.

S & F in repair sink with drainage board size 1145x510 mm, bowl size 560x410x200 mm made of stainless steel sheet 1.00mm thick with plugs, washers and wastes pipe & coupling etc incl bedding in cement mortar to draft wall or cantilever brackets and connection union to pipe all as specified and directed.

S & F in repair stainless steel kitchen plate rack made out of 0.63mm thick stainless steel sheet of size 750x600 mm including screws and weight not less than 5.00 Kg complete all as directed.

S & F 18mm thick factory made 100% solid WPC flush shutter (for cupboard, wardrobe ,etc) made from co-extruded three layer rigid foam sheet Single extruded) with 0.8 to 1mm thick outer layer having density not less than 1400kg/cum and density of center core not less than 600kg/cum, with prelamination on both front and back side manufactured by and ISO 9001/2015 certified company complete all as specified and directed.

S & F Continuous (piano) hinges width of flange (whene open) 30mm mild steel, bright finish or elecrogalvanised fixed with screw to timber frame work complete all as spacified and directed.

S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

S&F in repair fancy type 25mm dia stainless steel curtain rods/Cupboard hanging rods including bracket/junctions /wall to wall and with rings of best quality as approved by Engineer-in-Charge.

Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples.

S&F 4.80mm thick Sheet glass, ordinary quality and glazing square n exc 0.5 sq. m in each pane

M&L, Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes (with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area single core F.R.L.S. cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:One light / fan point controlled by one switch with cable size 1.5 sqmm.

All as per Serial item No. 167 here in before but One 3 Pin, 5 Amp socket outlet point on an independent board with cable size 1.5 sqmm.

All as per Serial item No. 167 here in before but One 3 pin, 15 Amp socket outlet point on an independent board with cable size 2.5 sqmm.

S&F modular switch, single pole, one way 6 Amp, 230 Volts, 1 module complete all as specified and directed by Engr-in-charge.

S&F modular switch, single pole, 1 way 16A, 230 V,1 module complete all as specified anddirected by Engr-in-charge.

S&F modular socket, single pole, 3 pin 6 Amp, 230 Volts, combined 2 module complete all as specified and directed by Engr-in-charge.

S&F modular socket, single pole, 3 pin 6/16 Amp, 230 Volts, combined 2 module complete all as specified and directed by Engr-in-charge.

S & F modular white cover plate with frame, 3 module complete all as specified and directed by Engr-in-charge.

S & F modular white cover plate with frame, 4 module complete all as specified and directed by Engr-in-charge.

S & F modular white cover plate with frame, 6 module complete all as specified and directed by Engr-in-charge.

Supply and fix ceiling rose, three terminals, polycarbonate bodycomplete all as specified and directed by Engr-in-charge.

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,120 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.

S & F in repair LED Building security light 35 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts complete all as specified and directed by Engr-in-charge.

M&L for Submain wiring with two single core unsheathed, PVC (FRLSH) insulated, 1100 Volts grade cable with 6.0 sqmm nominal cross sectional area Multi-stranded copper conductor and one single core green unsheathed, PVC (FRLSH) insulated, 1100 Volts grade cable with 6.0 sqmm Multi-stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20 mm dia including all conduit and fixing accessories concealed in wall including cutting chases in wall and making good disturbed surface to match of walls/ceiling complete all as specified and directed by Engr-in-charge. (Note - PVC Conduit and accessories shall be deemed to be included in the quoted rate)

M&L for Submain wiring with two single core unsheathed, PVC (FRLSH) insulated, 1100 Volts grade cable with 4.0 sqmm nominal cross sectional area Multi-stranded copper conductor and one single core green unsheathed, PVC (FRLSH) insulated, 1100 Volts grade cable with 4.0 sqmm Multi-stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20 mm dia including all conduit and fixing accessories concealed in wall including cutting chases in wall and making good disturbed surface to match of walls/ceiling complete all as specified and directed by Engr-in-charge. (Note - PVC Conduit and accessories shall be deemed to be included in the quoted rate)

Supply and fix sheet metal enclosure DB, single pole and neutral, AC, 240 volts, 8 way with 200 Amps rated bus bar and double door complete all as specified and directed by Engr-in-charge.

Supply and fixing of MCB SP 240 volts of 06 to 32 Amps, 10 KA Current carraying capacity complete all as specified and directed by Engr-in-charge.

Supply and fixing of MCB SPN 240 volts of 16 to 32 Amps, 10 KA Current carraying capacity complete all as specified and directed by Engr-in-charge.

Supply and fixing of MCB SPN 240 volts of 40 to 63 Amps, 10 KA Current carraying capacity complete all as specified and directed by Engr-in-charge.

S&F Modular AC BOX Power unit with Socket Plug top and MCBs with Single pole and neutral enclosure with a two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed by Engr-in-charge.

Supply and fix wall mounted fans complete with blades and accessories single Phase 230V of size 300m sweep min air delivery 210 CFM with service value 6 BEE complete all as specified and as directed.

M&L of Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of nut, bolts, check nut & washer of galvanized iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of char coal and salt PCC chamber, reassed for and including RCC cover including all necessary excavation & earth work, earth 7.5 mtr wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 1991 print and complete all as per specified and directed by Engr-in-charge.

M&L for point wiring with PVC insulated and unsheathed cable 1.5 Sqmm (nominal area) ISI marked multi-stranded copper conductor single core including 20mm dia medium grade PVC conduit concealed in wall / false ceiling, concealed terminal boxes not less than 1.6 mm thick of required size with top cover 2.8 mm thick of plastic laminated sheet (Hylum) of required colour complete metal flush terminal boxes with all accessories including 1.5 Sq mm PVC insulated and unsheathed stranded copper wire conductor cable to common earth and connecting to earth dolly including colour coding of cable shall be Phase - Red, Neutral- Black and Earth- Green complete all as specified and directed by Engr-in-charge for:-(a) One light/fan point controlled by one switch

All as item no 189 above but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15/20 Amp socket out let point on an independent board.

S&F switch piano flush button single pole one way 5 Amp 240 volt complete as directed.

S&F switch piano flush button single pole one way 15 Amp 240 volt complete as directed.

S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 230 volts complete as directed.

S&F angle type holder insulated body with back plate suitable for batten fittings as directed.

S&F 9 watt LED bulb (lamp) all as specified and directed by engineer in charge

S&F MCB DB sheet enclosure single pole and neutral 4 way 240V with 200 Amp suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 4 way double door complete all as specified and directed by Engr-in-charge.

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.

S&F LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, “ IP66 and IK 07 average life 50000 burning hours with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including provn of flexible three core cable from ceiling rose to terminal for making connection , fitting on wall, including making recess on wall of required size and all necessary fixing accessories complete all as specified and as directed.

S&F 1100V grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection ,one twin core cable flat or circular strande 10 sqmm aluminiuam conductor complete all as specified and as directed.

Taking down carefullycopper/aluminium point wiring (light, fan, socket or power) complete with fitting such as switches, sockets ceiling rose sketch light fittings etc, and making good the disturbed surface of walls and floors etc as directed.

Taking down carefully old FTL/CFL fitting of any wattage/any other types of light fittings and making good disturbed surface of walls and floor etc complete all as spacified and directed

S & F FTL fittings with decorative LED batten made up of aluminium casting 18/20 W of size complete standard fittings and fixtures including fixing on walls/roofs/ through MS downrod suspended type with fitting arrangement including neccessary elect connection from ceiling rose to luminaries with suitable size PVC cord complete all as directed.

Supply and fixing Material glass led tube ,voltage range 220-240v-50hz ,cct 6500k,lumen ,wattage 20/22W surge 2.5kv ,CRI 70 POWER FACTOR >_0.9 ,sigle side BURING HOURS 25K HOURS 110 L/W ,6000 K with high efficency, with neccessary electrical connection incl disconnection old elecronic ballast if any complete all as directed.

S& F Decorative wall light fixture made up of Metal base, synthetic white in colour and square/round metal base with bend pipe and glass globe with nickel finish, ( B-22/E27 base), with 01 No. 7/9 W LED Bulb, 230 V, 6000K, complete incl all required electrical connecting arrangements all as specified and as directed.

S&F super bright LED (2X2), 36 W, 6500 K recess mounting minimum 110Lumens/watt IP20 ,IK02 PF>.9 and 4kv inbuilt surg protection with high efficent LED source all as per specified and directed by engineer in charge.

M/s Chandra Mohan and Sons (BID ID -3263777)