WBSEDCL/RE/DDUGJY/ SS/20-21/NIT2

Amount

Earth work in excavation of foundation trenches or drains in all sorts of soil but excluding laterie or sandstone including removing spreading or stacking the spoils within a lead of 75m. as directed. The item includes leveling, dressing and ramming the bottom bailing out water as required complete.

a) Depth of excavation not exceeding 1500mm.

b) Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring

Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150mm including watering and ramming etc. Layer by complete. (Payment to be made on the basis of measurement of finished quantity of work)

a) With earth obtained from excavation of foundation.

Filling in foundation or plinth by silver sand in layers not exceeding 150mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand (Payment to be made on measurement of finished quantity).

Singles brick flat soling of picked jhama brick including ramming and dressing bed to proper level and filling joints with powdered earth or local sand.

Cement concrete with graded stone ballast (40mm size) excluding shuttering. In ground floor. - i) Pakur variety- 1:3:6 proportion

Ordinary cement concrete (mix-1:1.5:3) M-20 with graded stone chips (20mm down) excluding shuttering and reinforcement. If any, in ground floor as per IS 456-2000.

a) With Pakur variety-In ground floor

Ordinary Cement concrete M-15 (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.

a) With Pakur variety-In ground floor

Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, fittings, fixing and striking out after completion of works(upto roof of ground floor)

a) 25mm to 30mm thick shuttering without staging in foundation etc.

b) 25mm to 30mm thick wooden shuttering as per direction of E.I.C.-in ground floor

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter- section, complete as per drawing and direction.Tor Steel / Mild Steel

a) Other than SAIL/TATA/RINL- in ground floor

Brick work with 1st class bricks in cement mortar(1:6).

i) In foundation and plinth

125mm tick brick work with 1st class bricks in Cement mortar (1:4).

i) In ground floor

(f) M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S. flats and bars.

Anodized aluminium barrel/tower/socket bolt(full covered) of approved quality manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with Cadmium plated screws.

i) 300mm long x 10mm dia bolt.

Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete. Heavy type (I.S.I. size 3)

Steel body foot-door holder

Supplying, fitting fixing I.S.I. approved quality and brand hydraulic (oil check) floor door spring, heavy duty double action with brass shoe, brass top centre aluminium top cover etc. complete set as per direction of Engineer-incharge.

Plaster (to wall ,floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and racking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]

A) In ground floor-With (1:4) cement mortar.

i) 10 mm thick plaster

ii) 15 mm thick plaster

Neat cement punning about 1.5mm thick in wall, dado, window, sills, floor drain etc. using cement @ 0.152 m3 /100 m2 .

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc.

Painting with best quality synthetic enamel paints of approved make and brand including smoothing surface by sand papering etc. including using of approved putty etc. on the surface of necessary.

a) On timber or plaster surface with super gloss(hi-gloss) of approved quality. i) Two coats (with any shade except white.)

b) On steel or other metal surface with super gloss (hi-gloss) of approved quality. i) Two coats (with any shade except white.)

Applying exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface of old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scrapping and papering the surface thoroughly, complete as per manufacturer’s specification and as per direction of EIC.

i) In ground floor-one coat

Protective and decorative Acrylic exterior paint of approved quality as per manufactures specification and as per direction of E.I.C. to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.

a) Premium 100% Acrylic Emulsion. i) In ground floor

Applying interior grade Acrylic primer of approved quality and brand on plastered or concrete surface of old or new surface to receive Distemper/Acrylic emulsion paint including scrapping and papering the surface thoroughly, complete as per manufacturer’s specification and as per direction of EIC.

a) One coat-Water based interior grade Acrylic Primer i) In ground floor

Applying Acrylic Emulsion paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer).

a) Standard quality-Two coats.

Supplying, delivery and spreading approved quality double washed black stone including cost of materials, carriage, loading, unloading all complete including all taxes and duties and incidental charges as per direction of Engineer-In- Charge.(Payment will be made on net volume)

i) Grade-II aggregates (53-22.4mm) Hand broken aggregates

Earth work in filling in compound, tank, low land, ditches etc. with good earth.in layers not exceeding 150mm. Including and dressing complete. (Payment will be made profite measurement before and after the work)

b) With carried earth arranged by the contractor within a radius of 5 km to 10 km. including cost of carried earth.

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1956 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 1957, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. I) For structural members of specified sections weighing less than 22.5 Kg./m

Brick edging 75 mm wide with picked jhama bricks, laid true to line and level including cutting necessary trench in soil or in hard metalled surface, laying the bricks and repacking the trench (on both side of the edging) with spoils and ramming the same thoroughly complete as per direction. Brick-on-end edging (250 mm) depth.

GST WILL BE PAID EXTRA AS APPLICABLE.

M/S MD SOLEM

Sarkar Enterprise