WBPWD/EE/JED/eNIQ03/2024-25

Amount

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting

Extra, for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) incl. drilled hole in pole suitable for alkathene/polythene pipe entry, for street light wiring, without Loop Box

Supply & Fixing of 250 V. 70 watt . green line LED fittings complete with all accessories street light luminaire with single piece die cast alluminium housing and heat resistance toughened glass IP 66 protection out door luminaires ((make: Phillips cat. No.- BRP032 LED70 CW MR PSU GR DX/ CG EQV) / equivalent of Bajaj/CG) incl. fixing the fittings on the top of the pole.

Supply and Fixing of 250V, 150W LED outdoor floodlight luminaire on head of high mast with suitable and necessary arrangements incl. connetion. off White colour light (Make : Crompton cat no . TFS-507-150-57-60D-SL-GL-NSG/Philips/Bajaj)

supply and delivery of the following cable:

2 core 16sqmm 1.1 kv grade AL/A XLPE (for area light)

4 core 16sqmm 1.1 kv grade AL/A XLPE (for area light)

4 core 25sqmm 1.1 kv grade AL/A XLPE (for area light)

Laying of following size cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed( Havells/ Approved make ) as per direction of EIC (college campus + ground )

4 core x 16 Sq. mm. XLPE /PVC, Al armoured cable

Supplying and fixing following compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables

2 core x 16 Sq. mm. XLPE /PVC, Al armoured cable

4 core x 16 Sq. mm. XLPE /PVC, Al armoured cable

4 core x 25 Sq. mm. XLPE /PVC, Al armoured cable

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

2 core x 16 Sq. mm. XLPE /PVC, Al armoured cable

4 core x 16 Sq. mm. XLPE /PVC, Al armoured cable

4 core x 25 Sq. mm. XLPE /PVC, Al armoured cable

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required.

40 mm dia

Painting of Steel Tubular Pole of 8.5 mtr length and no. of coats of paint, with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 8.5 mtr. long pole (i) One coat of red lead/Zinc chromate priming (ii) 1st coat of synthetic enamel paint over the primer (iii) 2nd coat of synthetic enamel paint over the 1st coat

Painting of Steel Single arm bracket of 1.5 mtr lengths and no. of coats of paint, with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. i)1st coat of synthetic paint over 1 coat of RO priming, II)2nd coat of synthetic paint over 1st coat

S& drawing from loop box to fitting by 3x1.5 sq. mm PVC insulated copper wire (Finolex 'FR') through MPVC/3mm thick Polythene pipe.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level(TATA-Medium)

Excavation of soil for installation of Earth Electrode and filling & ramming.(morrum soil)

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages

Solid GI wire no 4 SWG

S & Installation of Feeder pillar box of suitable size made with 5mm MS plate having front & back opening hinged with door handle and double locking arrangement with Godrej lock and keys. There should be proper ventilation spout at the centre of the top side. The pillar box should be erected over suitable brick structure with plaster and neat cement finish and to be painted by two coats of paints over two coats of primer. The pillar box should be provided with following incl. S&F switches, necessary connection etc. as required. 1) S & F 415V, 63A ,TPN Main switch (L&T)---1no. 2) S & F 415V, 100A,4 Bar Copper BBC---1no 4) S & F Time switch GIC make type FM quartz----1nos 5) S & F 3-Pole power contractor L & T Make ,(ML-3)-1nos 6) Auto/Manual Toggle switch ---1nos 7) Diode type neon Indicator Lamp-3nos

JASODA REFRIGERATOR SERVICING CENTRE

BAPPA CONSTRUCTION