Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹2.0 Cr
EMD Value
₹4.0 L
Closing Date
12 Nov 2025, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Er. PRADEEP KUMAR
OFFICE OF EXECUTIVE ENGINEER, CONSTRUCTION DIVISION, PWD B and R, PATHANKOT
SPECIAL REPAIR OF VARIOUS L/R IN CONSTITUENCY BHOA, MC NAROT JAIMAL SINGH UNDER S/R FOR THE YEAR 2022-23, 2023-24, 2024-25 IN DISTT. PATHANKOT INCLUDING MAINTENANCE OF ROAD FOR 5 YEARS(ONE YEAR DEFECT LIABILITY PERIOD FOUR YEAR) Gr. No. 8 (7 Roads)
2025_CEPW_152739_1
Bid No. 42 Dated 28-10-2025 Group No. 8
Open Tender
Civil Works - Roads
Percentage
180 days
PATHANKOT
Please refer Tender documents.
7 documents required · 7 mandatory
₹10,000
₹4.0 L
14 Nov 2025
29 Oct 2025
13 Nov 2025
29 Oct 2025
12 Nov 2025
29 Oct 2025
Making 50mm x 50mm furrows on existing road surface
Dismantling of exisiting road crust taking it as solling as per CSR 8.2a
Dismantling brick Edging in Raising (CSR 8.5i)
Loosening, leveling and compacting original ground up to a level of 225mm below road crust, mixed with water at OMC, levelled, graded and compacted in layers by rolling so as to achieve minimum dry density as given in Table 300-2 for sub grade construction as per technical clause 305 of MORT&H specifications ( Where Earth work done by Villagers)
Providing and fixing brick on end edging as per CSR 24.15
Relaying of recovered material obtained from dismantling of road crust as construction of Granular sub base by prodiding close graded material Grading-II, Spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per technical clouse 401 of MORT&H Specifications.
Construction of granular sub-base by providing material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MORD technical specifications
Providing, laying, spreading and compacting stone aggregates of Grading I to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, applying and brooming requisite type of binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of MORT&H specifications without screening
Providing, laying, spreading and compacting stone aggregates of Grading II to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, applying and brooming requisite type of binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of MORT&H specifications without screeening
Credit of materials (from Raising & Strengthening)
Brick Bats
Bricks
Providing and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder VG-10 @ 1kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 510 of MORT&H specifications.
Providing and applying tack coat with penetration grade bitumen VG- 10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical clause 503 of MORT&H specifications
Providing, laying and compaction of open - graded premix surfacing of 20 mm thickness consisting of crushed stone agg regates of specified grading premixed in a batch type hot mix plant with bituminous binder VG-10 @ 1.46kg per sqm, carriage of mixed material to site of work and laid with paver and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 511 of MORT&H specifications
Providing and laying of premix sand seal coat premixed in batch type hot mix plant using specified fine aggregates and penetration grade bitumen VG-10 @ 0.68kg per sqm, carriage of mixed material to site of work, laid to the specified levels, grade and cross fall complete as per technical clause 513 of MORT&H specifications
Earth work undressed with a combined lead upto 2 meters including breaking of cloads as per CSR 6.2b & g-I)
Reinforced cement concrete M-15 grade ordinary kilometre stone of standard design for village roads as per IRC 8-1980 fixing in position including painting and printing etc. complete as per technical clause 804 of MORT&H specifications (CSR 24.37 c)
Reinforced cement concrete M-15 grade village board of standard design fixing in position including painting and printing etc. complete as per PWD specifications (CSR 24.40)
Provision for Videoprahy of Roads
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
Cement concrete 1:4:8 with stone ballast (40 mm)
Cement concrete 1:6:12 with stone ballast (40 mm)
First class burnt brick work laid in cement sand mortar 1:5 in foundation & plinth
First class burnt brick work laid in cement sand mortar 1:5 in Super Structure
Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in Super Structure.
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
Centering and shuttering for Slab Culverts upto 3 meters span
Supply of 1½' dia NP-3 Hume Pipe including collar & Carrige
Cement concrete 1:2:4 for bed plat
Cement Pointing 1:2
12.5mm thick Cement Plaster 1:5
Providing and laying mud concrete
Cement rendering 1mm thick
Painting with synthetic enamel paint (CSR 16.7+16.18a)
Cold twisted detormed (Ribbed/ ToR Steel Bar) Bars (Fe 500 grade as per IS 1786-2005) , for R.C.C works, where not including in the complete rate of RCC including bending and biding placing in position complete
Brick flooring with C.M 1:5 on 6" Thick ceemnt Concrete 1:6:12 including Pointing C.M 1:2
Squared rubble masonry coursed (coursed rubble) in foundations and plinth in cement mortar 1:5
Add 1% Cultural Cess
MAINTENANCE OF ROAD FOR 5 YEARS (ONE YEAR DEFECT LIABILITY PERIOD + FOUR YEARS MAINTENANCE PERIOD) IN DISST. PATHANKOT
For 2nd year maintenance
For 3rd year maintenance
For 4th year maintenance
For 5th year maintenance
Add 1% Cultural Cess
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.09 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.13 MB
AdditionalConditionsPlant_and_Others.pdf
Tender Documents • 4.80 MB
Copa_and_TechnicalConditions.pdf
Tender Documents • 8.37 MB
SBDSpecialRepairGroup8.pdf
Tender Documents • 29.67 MB
BOQ_309629.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .