REPAIR / MAINTENANCE OF INTERNAL FITTING FIXTURE, CEILING FAN, EXHAUST FAN, GEYSER, DESERT COOLER, AC AND ALLIED E/M WORKS AT OFFICE, RESIDENTIAL COLONY AND GUEST HOUSE OF PCDA UNDER GE(S) JAIPUR

Amount

Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for point wiring complete with 1.5 Sqmm single core (Phase - Red, Neutral - Black) PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable inclosed in and including concealed PVC conduit 20 mm dia medium grade with all accessories ISI marked, including MS sunken box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting fitting like switches, sockets fan regulators etc. including 1.5 Sqmm single core (Green colour) PVC insulated unsheathed copper earth continuity conductor FRLS cable 1100 V grade as continuous earth wire for one light / fan / bell point controlled by one, one way switch. Note :- (i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of MS sunken box & cover plate of size as required at site and cutting chases in stone / brick masonry and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate.

M&L for point wiring complete with 1.5 Sqmm single core (Phase - Red, Neutral - Black) PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable inclosed in and including concealed PVC conduit 20 mm dia medium grade with all accessories ISI marked, including MS sunken box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting fitting like switches, sockets fan regulators etc. including 1.5 Sqmm single core (Green colour) PVC insulated unsheathed copper earth continuty conductor FRLS cable 1100 V grade as continuous earth wire for one light point controlled by two, 2-way switch. Note :- (i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of MS sunken box & cover plate of size as required at site and cutting chases in stone / brick masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 Sqmm (Green), concealed in wall and drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in MS sunken box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for one 3 pin socket outlet 5 Amps on the same board with other switches, complete all as specified and as directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 Sqmm (Green), concealed in wall and drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in MS Sunken box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for 3 pin 5 Amps socket outlet on independent board, complete all as specified and directed. Note :- (i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of MS sunken box & cover plate of size as required at site and cutting chases in stone / brick masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4.0 Sqmm (Green), concealed in wall, drawn into and including rigid non metallic PVC conduit medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in MS Sunken box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for 3 Pin 15 Amps socket outlet on independent board, complete all as specified and directed. Note :- (i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of MS sunken box & cover plate of size as required at site and cutting chases in stone / brick masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate.

S&F modular switch one way 6 A, 1 module complete all as specified and directed.

S&F modular socket, 6A - 2/3 pin combined, 2 module complete all as specified and directed.

S&F modular switch 1 way 16A, 1 module complete all as specified and directed.

S&F modular socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Fan step regulator, 120W - 2 module complete all as specified and directed.

S&F modular switch 2 way 6A, 1 module complete all as specified and directed.

S&F modular bell push 6A, 1 module complete all as specified and directed.

S&F Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and directed.

S&F in repair white cover plate with frame, 1 module complete all as specified and directed.

S&F in repair white cover plate with frame, 3 module complete all as specified and directed.

S&F in repair white cover plate with frame, 4 module complete all as specified and directed.

S&F in repair white cover plate with frame, 6 module complete all as specified and directed.

S&F in repair white cover plate with frame, 8 module complete all as specified and directed.

M&L for point wiring complete with 1.5 Sqmm single core (Phase - Red, Neutral - Black) PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable inclosed in and including PVC casing-capping not less than 25x12 mm ISI marked ivory colour with all accessories ISI marked, including MS sunken box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting fitting like switches, sockets fan regulators etc. including 1.5 Sqmm single core (Green colour) PVC insulated unsheathed copper earth continuity conductor FRLS cable 1100 V grade as continuous earth wire for one light / fan / bell point controlled by one, one way switch. Note :- (i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of MS sunken box & cover plate of size as required at site and cutting chases in stone / brick masonry and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate.

M&L for point wiring complete with 1.5 Sqmm single core (Phase - Red, Neutral - Black) PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable inclosed in and including PVC casing-capping not less than 25x12 mm ISI marked ivory colour with all accessories ISI marked, including MS sunken box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting fitting like switches, sockets fan regulators etc. including 1.5 Sqmm single core (Green colour) PVC insulated unsheathed copper earth continuty conductor FRLS cable 1100 V grade as continuous earth wire for one light point controlled by two, 2-way switch. Note :- (i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of MS sunken box & cover plate of size as required at site and cutting chases in stone / brick masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 Sqmm (Green), PVC casing-capping not less than 25x12 mm ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in MS sunken box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for one 3 pin socket outlet 5 Amps on the same board with other switches, complete all as specified and as directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 Sqmm (Green), PVC casing-capping not less than 25x12 mm ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in MS Sunken box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for 3 pin 5 Amps socket outlet on independent board, complete all as specified and directed. Note :- (i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of MS sunken box & cover plate of size as required at site and cutting chases in stone / brick masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4.0 Sqmm (Green), in PVC casing & caping, not less than 25mm x 15mm, ISI marked ivory colour with all fittings / fixing accessories and terminated in MS Sunken box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for 3 Pin 15 Amps socket outlet on independent board, complete all as specified and directed. Note :- (i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of MS sunken box & cover plate of size as required at site and cutting chases in stone / brick masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate.

S&F switch piano, flush type, 6 amps single pole, one way, complete all as specified and directed.

S&F switch piano, flush type, single pole, one way, 16 Amp complete all as specified and directed.

S & F switch piano flush type 06 amps single pole two way, complete all as specified and directed.

S & F bell push, flush type, 5 Amp complete all as specified and directed.

S&F socket outlet 2 in 1,3 pin, 6 Amp complete all as specified and directed.

S&F Socket outlet 2 in 1,flush type 3 pin, 6 and 16 amp complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. complete all as specified and directed.

S&F in repair Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and directed.

M&L in replacement lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F ceiling rose 3 phase, PVC / polycarbonate, isolated body complete all as specified and directed.

M&L in repair for sub main wiring complete with 2 runs of 6 Sqmm single core PVC insulated unsheathed FRLS copper cable 1100 V grade with multistranded copper conductor ISI marked drawn through and including PVC rigid conduit / casing capping not less than 20mm and conduit accessories fixed on surface of wall / celing etc including provision of 1 Run of 6 Sqmm PVC insulated unsheathed FRLS cable with multistranded copper conductor as earth continuity complete all as specified and directed. Note : 02 Run of 06 Sqmm copper wire and 01 Run of 06 Sqmm copper earth wire along with PVC conduct shall be measured as one unit.

M&L for sub main wiring complete with 4 Runs of 6 Sqmm single core PVC insulated unsheathed FRLS copper cable 1100 V grade with multistranded copper conductor ISI marked drawn throughn and including PVC rigid conduit / casing capping not less than 25mm and conduit accessories fixed on surface/wall celing etc including provision of 1 Run of 6 Sqmm PVC insulated unsheathed FRLS cable with multi-stranded copper conductor as earth continuity complete all as specified and directed. Note : 04 Run of 06 Sqmm copper wire copper wire and 01 Run of 06 Sqmm copper earth wire along with PVC conduct shall be measured as one unit.

S&F in replacement sheet metal enclosure with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB of capacity 20 Amps complete all as directed.

Supply and fixing in repair 25 mm external dia rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed.

S&F in repair sheet metal enclosure factory fabricated for MCB distribution board SPN double door type concealed in wall 240 Volt 4 way IP-42 protection with 200 amp rated bus bar complete all as specified and directed.

S&F sheet metal enclosure factory fabricated for MCB distribution board SPN double door type concealed in wall 240 Volt 8 way IP-42 protection with 200 amp rated bus bar complete all as specified and directed.

S&F in repair sheet metal enclosure factory fabricated for MCB distribution board SPN double door type concealed in wall 240 Volt 12 way IP-42 protection with 200 amp rated bus bar complete all as specified and directed.

S&F in repair sheet metal enclosure factory fabricated for MCB distribution board TPN double door type concealed in wall 415 volt 4 way IP-42 protection with 200 amp rated bus bar complete all as specified and directed.

S&F in repair MCCB 4 pole, 63 Amps, 16 KA ,415 volt,AC thermal adjustable type between 70 to 100% including 4 spreader link set of same complete all as specified and directed.

S&F in repair MCCB 4 pole, 125 Amps, 16 KA ,415 volt,AC thermal adjustable type between 70 to 100% including 4 spreader link set of same complete all as specified and directed.

S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole and 06 to 32 Amp current carrying capacity complete with connection testing and commissioning all as specified and directed.

S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN and 32 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.

S&F in repair 415V 10KA 'B' curve miniature circuit breaker (MCB) of TPN / FP and 40 to 100 Amp current carrying capacity complete with connection testing and commissioning all as specified and directed.

S&F in repair LED lights fitting 1x20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

M&L for post top lantern LED type 40 watt, 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. Note : The quoted rate include the cost of assembling of the complete fitting and its testing before and after mounting or erection etc. for proper functioning.

S&F in repair for exhaust fan, made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep of size 250mm complete all as specified and directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed.

Taking down and dismantling ceiling fan of any size including accessories of any type or make, safely and re-fixing after oiling, greasing and servicing in serviceable condition including provision of cable from ceiling rose or connector to fan including painting of fan by one coat of synthetic enamel paint of in white / off white colour by spraying including filling cavities with filler, after cleaning all dust etc. including writing Fan No. on each fan complete all as specified and directed.

S&F for ball-bearings / bush for ceiling fan of 1200/1400mm sweep size, complete all as specified and directed.

S&F for re-winding the burnt / short circuited winding for ceiling fan of 1200 / 1400 mm sweep size with same guage, super enameled, copper wire to maintain speed at load complete all as specified and directed.

S&F capacitor from 2.15 to 3.15 MFD capacity for 1200/1400 mm sweep size ceiling fan, complete all as specified and directed.

S&F for metal body of ceiling fan for ceiling fan of 1200/1400mm sweep size, complete all as specified and directed.

S&F for PVC canopy for ceiling fan of 1200/1400mm sweep size, complete all as specified and directed.

S&F for down rod of 15mm dia and 45/60mm long for ceiling fan of 1200/1400mm sweep size, complete all as specified and directed.

S&F for a set of three metalic blade for ceiling fan of 1200mm sweep size, complete all as specified and directed.

S&F for Parallel Groove Clamp (PG) with rubber bush for ceiling fan of 1200/1400mm sweep size, complete all as specified and directed.

Taking down and dismantling exhaust fan of any size including accessories of any type or make, safely and re-fixing after throughly cleaning the bearing / bush, shaft, stator, rotor etc. & oiling, greasing and servicing in serviceable condition including provision of cable from ceiling rose or connector to fan including painting of fan by one coat of synthetic enamel paint of in white / off white colour by spraying including filling cavities with filler, after cleaning all dust etc. including writing Fan No. on each fan complete all as specified and directed.

S&F for ball-bearings / bush for exhaust fan of 300 / 450mm sweep size, complete all as specified and directed.

S&F for re-winding the burnt / short circuited winding for exhaust fan of 300 / 450 mm sweep size with same guage, super enameled, copper wire to maintain speed at load complete all as specified and directed.

S&F exhaust fan motor for 300/450mm sweep size, complete all as specified and directed.

S&F iron blade for exhaust fan of 300mm sweep size, complete all as specified and directed.

S&F iron blade for exhaust fan of 450mm sweep size, complete all as specified and directed.

S&F louver of appropiate size for exhaust fan, 300/450mm sweep size complete all as specified and directed.

S&F fasteners of appropiate size for exhaust fan, 300/450mm sweep size complete all as specified and directed.

S&F Nut & Bolts of appropiate size for exhaust fan, 300/450mm sweep size complete all as specified and directed.

S&F set of 04 legs / brackets and rubber bush of appropiate size for exhaust fan, 300/450mm sweep size complete all as specified and directed.

S&F capacitor of 4.0 MFD capacity for 300/450 mm sweep size exhaust fan, complete all as specified and directed.

M&L for PVC casing capping of size not less than 25x15 mm, ISI marked, ivory colour along with all fittings / fixing accessories, complete all as specified and directed.

S&F in repair for plug top 3 pin, 15 Amp, ISI marked complete all as directed.

S&F in repair for plug top 3 pin, 05 Amp, ISI marked complete all as directed.

Taking down desert cooler for repair / Servicing of 3000 / 4000 CFM air flow capacity, single phase 230 Volts, of any make, after disconnecting electric / water connection, drain out water and carry out minor repair work such as repairing of internal worn out wires, and re-assembling after replacement of unserviceable parts such as Motor, Fan blade, lead wire sumbersible pump,switch, regulator and legs and including preparing the steel surfaces and applying two coats of synthetic enamel paint, testing complete all as specified and directed.

M&L for body of desert cooler for desert cooler of 66cm x 66cm x 1m size, made out of 20 gauge galvanised sheet, depth of water tank shall be minimum 28cm and including spray painting to external surfaces of cooler and anti-corrosive rubber paint to internal surface of water tank portion complete all as specified and directed.

M&L for re-winding the burnt / short circuited winding of main electric motor of desert cooler of 3000/4000 Cubic Feet per Minute (CFM) capacity with same guage, super enameled, copper wire to maintain the same speed CFM, complete all as specified and directed.

S&F for main electric motor of desert cooler for desert cooler of 3000/4000 Cubic Feet per Minute (CFM) capacity , complete all as specified and directed.

S&F for fan Blade iron body with nut, Bolt, washer for (3000/4000) CFM Desert Cooler of any make all as per existing one , complete all as specified and directed.

S&F for Flexible Core PVC insulated with stranded copper conductor 4 Sqmm 3 core 600/1100 V ISI Marked, complete all as specified and directed.

S&F for Submersible Vertical pump with suitable head for Desert coolers (3000/4000) CFM air flow capacity single phase 230 Volts &, complete all as specified and directed.

S&F for iron legs with nut & bolt to hold fan as well as motor of Desert cooler all as specified and directed.

S&F for Side Panels(set of 3) made of MS Sheet 2 mm thick for (3000/4000) CFM Desert Cooler, complete all as specified and directed.

S&F for wooden shelving pad for Desert cooler set of three for 3000/4000 CFM , complete all as specified and directed.

S&F for PVC flexible pipe (from vertical pump to distributer and distributer to side shutter approx 2 mtr) 15mm dia for Desert cooler including 3 way distributor junction tee set , complete all as specified and directed.

S&F for capacitor from 4 mfd capacity for Desert cooler(3000/4000) complete all as specified and directed.

S&F in repair sealed unit (Reciprocating compressor) 1.5 ton capacity, single phase, 230 volt of existing make including necessary modification of the foundation as required to suit the compressor, vacuumization including gas charging R-22 and testing complete all as specified and directed.

S&F in repair sealed unit (Reciprocating compressor) 2.0 ton capacity, single phase, 230 volt of existing make including necessary modification of the foundation as required to suit the compressor, vacuumization including gas charging R-22 and testing complete all as specified and directed.

S&F in repair sealed unit (Rotary compressor) 1.5 ton capacity, single phase, 230 volt of existing make including necessary modification of the foundation as required to suit the compressor, vacuumization including gas charging R-22 and testing complete all as specified and directed.

S&F in repair sealed unit (Rotary compressor) 2.0 ton capacity, single phase, 230 volt of existing make including necessary modification of the foundation as required to suit the compressor, vacumisation, pressure including gas charging R-22 and testing complete all as specified and directed.

M&L for taking down and rewinding of condensing fan motor of capacity 1/35, 1/20, 1/6 HP or 1/5 HP of any make with super enameled copper wire of any makeincluding replacement of the motor bushes and shaft and testing on load for the entire satisfaction of Engineer-in-Charge.

S&F in repairs running capacitor of capacity 45 to 50 MFD, 440 volts, 50 Hz. Complete all as specified and directed.

S&F in repairs blower fan motor of capacity 1/5 HP, Single Phase (As per sample)Complete all as specified and directed.

S&F in repairs Running capacitor of capacity 5MFD/6 MFD, 230 volts, 50 Hz. Complete all as specified and directed.

S&F Blower Motor, single phase 230 Volts 1500 RPM, suitable for 1.5 -2.0 TR Split type Air Conditioner Complete all as specified and directed.

S&F Plastic filter as per existing makes for Window/split type AC 1.5-2 ton capacity Complete all as specified and directed.

S&F remote control with existing make for window / split type AC, 1.5 / 2.0 ton capacity complete all as specified and directed.

S&F Blower Motor, single phase 230 Volts 1500 RPM, suitable for Window type AC 1.5-2 ton Complete all as specified and directed.

S&F in repairs Starting capacitor of capacity 80-120 MFD, 230 volts, 50 Hz Complete all as specified and directed.

S&F in repairs condensing fan motor 1/5 HP for 1.5/2.0 ton single phase, 230 volts, 50 cycle per second suitable for window type AC (As per sample) Complete all as specified and directed.

S&F in repairs condenser for window type AC 1.5 ton capacity of any make including charging of gas R-22 Complete all as specified and directed.

S&F in repairs cooling coil for window type AC 1.5 ton capacity of any make including charging of gas R-22 Complete all as specified and directed.

S&F in repairs thermostat suitable for any make of window type AC 1.5/2.0 ton capacity Complete all as specified and directed.

M&L for finding out the leakage with the pressure test of the condenser or cooling coil of window type AC/split type AC of 1.5/2.0 ton and dismantling the same for repair, reassembling the same after repair the leakage point by brazing/soldering including charging the gas R-22/R-22 and testing the AC to the entire satisfaction Complete all as specified and directed.

M&L for finding out the leakage with the pressure test of the condenser or cooling coil of window type AC/split type AC of 1.5/2.0 ton and dismantling the same for repair, reassembling the same after repair the leakage point by brazing/soldering including charging the gas R-410/R-406 and testing the AC to the entire satisfaction Complete all as specified and directed.

M&L in repair for PCB control card suitable for 1.5/2.0 TR capacity window type AC, single phase Complete all as specified and directed.

M&L in repair for PCB control card suitable for 1.5/2.0 TR capacity split type AC, single phase Complete all as specified and directed.

M&L for servicing of window type AC of 1.5/2.0 tone capacity by taking out the same from existing location, cleaning of condenser, cooling coil, and other components with cooling coil rinse solution and clean water, greasing of fan, motor, blower etc without damage any part and reinstall at the same location complete all as specified and directed.

M&L for servicing of split type AC of 1.5/2.0 tone capacity by taking out the same from existing location, cleaning of condenser, cooling coil, and other components with cooling coil rinse solution and clean water, greasing of fan, motor, blower etc without damage any part and reinstall at the same location complete all as specified and directed.

S&F in repair copper tube of size ⅝” dia for any capacity of split type AC complete all as specified and directed.

S&F in repair copper tube of size¼” dia for any capacity of split type AC complete all as specified and directed.

M&L for insulating foam pipe of size ⅝", ¼", and ⅜" dia of split type AC any capacity for both indoor and outdoor unit all as specified.

M&L for fan blade of suitable size for any capacity of window/Split type AC Complete all as specified and directed.

S&F in repairs flexible PVC waste water pipe, 15/20 mm dia, of split type AC any capacity and any make Complete all as specified and directed.

Supply, laying and commissioning of cable PVC sheathed with multistranded copper conductor of size 3 core 4 sqmm and including PVC conduitComplete all as specified and directed.

S&F in repairs MCB SP 25 Amp, ‘C’ curve type, 10 KA. Complete all as specified and directed.

S&F in repairs of overload protector relay of any make or any type AC of any make and any capacity Complete all as specified and directed.

S&F in replacement 3 pin plug top iron body type cap 20 Amp AC 240 Volts 50 Hz Make- legrand/ Cona /Ancor or any make specified in Appx 'B'

S&F sheet metal enclosure SPN with a two pin and earth plug socket complete including with 32Amps MCB 'C' single pole 240 Volt AC

Taking down storage type water geysers of 25 ltrs capacity any type any make, any model, from its existing location, transportation to work shop for repairs and transportation back and reinstallation of geyser as per technical instructions and as directed by engr-in-charge and including the following:- (a) Dismantling complete geyser and carrying out complete overhauling i.e disconnecting electric supply and opening the heating plate, inner assembly, descaling complete assembly including heating element,thermostat, overload relay protection. Replacement of defective heating element inlet and outlet tubes and refixing the assembly with gasket of good quality and tightening the nuts properly, reassembling geyser with all safety devices as specified in technical instructions and as directed. Notes:- (i) Spare Parts,Safety devices with it required accessories shall be measured and paid saperately under respective items of schedule as supply and fixing.

S&F for Heating element 2 KW suitable for operation on 230V AC 50Hz of geysers 25 Ltrs capacity complete all as specified and directed.

S&F for Heating element 1.5KW suitable for operation on 230V AC 50Hz of geysers 25 Ltrs capacity complete all as specified and directed.

S&F for Thermostat 40 to 90 degree centigrade varying capactiy for 25 Ltrs capacity Geyser complete all as specified and directed.

S&F for base assembly (6/9 holes) for 25/50 litre capacity complete with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element inclusive of clamps for holding the element with nut and bolts, washer complete all as specified and directed.

S&F for inner tank 25 litre capacity made out of heavy duty copper body complete all as specified and directed.

S&F for outer tank 25 litre capacity made out of heavy duty copper body complete all as specified and directed.

M&L for fasteners suitable for hanging of water storage heater of capacity 25 Ltrs (04 Nos Nut,Bolts & washer) complete all as specified and directed.

M& L for plug top suitable 15 Amp suitable for (geyser) water storage heater of capacity 25 Ltrs as per existing complete all as specified and directed.

S&F in repair of thermal-cutout with heating sensor rod (capillary type) overload relay/contactor (model T100 20Amp 250 Volts) as per existing sample suitable for 25 litres capacity Geysers, complete all as specified and directed.

S&F in repair of neon indicator lamp round or rectangular type (ISI marked) , complete all as specified and directed.

S&F in repair for Pressure release safety valve for Geysers spring loaded suitable for 15 mm pipe chromium plated (ISI marked), complete all as specified and directed.

S&F in repair for flexible copper wire PVC insulated, 3 core, 2.5 Sqmm dia multistranded, Complete all as specified and directed.

M&L in repair for chromium plated stainless steel pipe connection for cold water inlet / hot water outlet pipe of size 15 mm bore complete with nipple / adaptors 450mm long (ISI marked), complete all as specified and directed.

S&F PVC connection pipe of length 450 mm and 15 mm bore with nuts / adaptors for cold water inlet / hot water outlet complete all as specified and directed.

S&F Gun metal gate non return valves for iron pipe of 15 mm bore dia of pipe complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI wire 4 mm dia as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints including excavation and earth work, GI pipe light grade 15mm bore for protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC (1:3:6) type B-1 using 20mm graded stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1 using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm bore GI Pipe medium grade for watering complete all as shown in electrical plate No 3 of SSR Part-I(2009) and connected to earth test point including testing complete all as specified and directed. Note :- 1. PCC Chammer shall be constructed atleast 1.5 metre away form the earth electrode of the earth pit and pipe for watering shall be provided in slanting manner. 2. GI wire and protection pipe upto 7.5 meter from the earth plate electrode is deemed to be included in quoted rate. 3. Excavation for earthing to be done manually and Earth resistance below 3 Ohm should be obtained after measurement for every pit.

M/s Prakash Enterprises (BID ID -3368233)

M/S SHARADA ASOCIATE (BID ID -3368925)

Dev Enterprises (BID ID -3367987)