SPECIAL REPAIR TO BLDG NO T-110 RATION STORE NEAR MT SHED OF NO-01 INF BN AND BLDG NO T-30 TO T-34 (FIRING RANGE) AND PROVN OF SHED AT BLDG NO P-166 (UDAIPUR OFFICERs INSTITUTE) AT LAKE COURT AREA AT UDAIPUR MILITARY STATION

Amount

Taking down wooden chowkats or frames area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1 and reparing to broken jambs/reveals with plaster incl. white washing or distempering with putty as per exiting surface complete all as specified and as directed. (Note – The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts, plastering of jambs/ reveals incl. white washing or distempering with putty and no separate items for these shall be paid).

Taking down wooden chowkats or frames area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1 and reparing to broken jambs/reveals with plaster incl. white washing or distempering with putty as per exiting surface complete all as specified and as directed. (Note – The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts, plastering of jambs/ reveals incl. white washing or distempering with putty and no separate items for these shall be paid).

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified.

Supply and Fixing 0.50 mm thick galvalume aluminium zinc coating AZ-150 GI based corrugated steel coloured having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as specified etc.

Supply and Fixing 0.50 mm thick galvalume aluminium zinc coating AZ-150 GI based plain steel sheet coloured having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as specified etc.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness, including cover fillets complete all as specified.

Supply and Fixed suspended false ceiling system using Chicago metallic (E - grid) exposed suspended system, grid size 600mm x 600mm comprising of GI powder coated Main Runner of dimensions 39mm x 24mm x 0.8 mm thick (Thickness comprising of GI/0.4 mm+ PPPCGS/0.3 mm & weight of runner 1.35 kg for 3600 mm length), Cross Tee of dimensions 29mm x 24mm x 0.8mm thick (Thickness comprising of GI/0.4mm + PPPCGS/0.3mm & weight of Tee 0.195 kg for 600mm length) and Wall angle of dimensions 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI / 0.35mm + PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length) with and including 6mm thick HPSC (High pressure steam cured) pre primed, self embossed, textured designer board to be placed in the grid system duly suspended with 4mm dia GI wire hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt-0.007 kg/clip), hold down clips (wt-0.0035 kg/clip), with provn of light fixture complete all as per manufacturer instructions and as directed. (Make - Everest/Saint Gobin/Armstrong

Demolition of cement concrete(unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level and removing material from site complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

Material and Labour for machine cut size 550 x 550mm Kota stone slab flooring 18-22 mm thick jointed with grey cement slurry mixed with pigment to match the shade of the slab with & including cutting & mirror/diamond polishing, half round moulding at edge and screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6, complete all as specified and directed.

Material and Labour for machine cut size 550 x 550mm Kota stone slab 15-17 mm thick in riser of steps, skirting, dado and pillars etc laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab with & including cutting & mirror/diamond polishing, half round moulding at edge and 10mm thick rendering in cement mortar 1:4 , on fair faces of brick work or concrete surfaces as backing complete all as specified and directed.

Material and Labour for 15-18 mm thick green marble slabs on Window Cill/cooking platform/shelf/flooring etc. machine cut laid over and including cement screed 15mm thick in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type

Grinding, cutting and polishing (Granite finish) of existing Kota stone floor and making mirror polishing, complete all as specified.

Material and Labour for Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate), 25 mm thick in sub base of flooring etc, complete all as specified and directed.

Material and labour for 50mm thick, PCC 1:3:6 type C-1 (using 20 mm graded mechanically crushed stone aggregate) as in plinth protection/PCC path, and paving, finished the surface even and fair without using extra cement, laid in alternate bays, complete all as specified.

Supply and Fixing framed work as in doors or gates or framework for water tanks of angle or other section with gussest plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering doors etc, to be prepared for hanging and sliding with and including either hooks and hinges or steel hnging door fittings and fixing complete confirming to gde Fe 290 (Gde E-165)

Supply and fixed 35mm thick Flush shutters, solid core construction, with partical board core and plywood face panels, commercial type on both sides complete all as specified.

Supply and fixing IInd class (hollock) factory made 35mm thick glazed skelton shutters (minimum 4 panels), open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge prepared to slide horizontally on beads including Supply and Fixing bead etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed.

Supply & fixed 200 mm long aluminium anbodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

Supply & fixed 100 mm butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed.

Supply & fixed 150 mm long Extruded aluminium alloy handles, fabricated type anodised complete all as specified.

Supply and fixing 300 mm mild steel sliding door bolts, ISI marked, stove enameled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple, complete all as specified.

Supply & fixed MS helical door spring150 mm long fixed with screws to wooden chowkhats or fixed with welding to steel chowkhats.

Supply & fixed steel windows box type ERW hollow 'P' section comprising double frame for and including gauged and glazed skelton shutter 30mm thick jointed internally with flat iron 25x3mm complete including hinges handle tower bolts, stops lugs,grill etc all as shown in drawing CECZ TD -219 sheet 1/3 to 3/3 as applicable complete all as specified and directed. Note :- For the purpose of measurement & payment double shutter with frame and grill shall be considered as one unit. (ii) Glazing,wire mesh & painting shall be measured & paid separately.

Supply and Fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples (to be fixed upto four storey of bldgs) complete all as specified and directed.

Supply & fixed for sheet glass 3mm thick, ordinary quality and glazing with oil putty, in square n.exc 0.5 Sqm each and glazing with oil putty to steel window complete all as specified.

Supply & fixing in repairs stainless steel type curtain rod 22 to 25mm dia as per sample including taking down existing curtain rod complete all as specified and directed.

Supply & fixing of purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample as in repair, complete all as specified and directed.

Supply & fixing of stainless steel decorative fincals(round type with mirror optic finish)trade pattern for decorative type curtain rods suitable for 22 to 25mm dia curtain rods as per sample as in repaie complete all as specified.

Supply & fixing of stainless steel decorative fincals wall to wall trade pattern suitable for decorative type curtain rods 22 to 25mm dia as per sample as in repair, complete all as specified and directed.

Taking down cement plaster from brick walls ,concrete surfaces including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar (1:6) on brick or concrete surface of any description, finished the surface even and smooth without using extra cement complete all as specified.

Material and Labour for 15mm thick rendering on fair faces of brick work, concrete surfaces in cement mortar 1:4 mixed with WPC as per manufacturer’s instructions, finished even and fair, complete all as specified. (Note : WPC shall be measured and paid separately)

Material and labour 10 mm thick cement plaster in cement mortar 1:3 on ceiling, finished even and smooth without using extra cement all as specified and directed.

Supply only integral water proofing compound, complete all as specified.

Material & Labour for preparation of new plastered surfaces of wall and applying 1 mm thick Birla/JK wall care white putty in two layers for neat and smooth finishing including preparation complete all as specified.

Material and Labour for applying two coats of distempering with acrylic distemper white or coloured on prepared wall surfaces (putty) complete all as specified and directed.

Material & Labour for preparing new plastered surfaces and applying three coat of white wash on ceiling complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer/white wash complete all as specified.

Material and labour for preparation of old Plastered or un-plastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts treating oil and greasy spots etc and applying one coat of white wash on ceiling complete all as specified.

Material and labour for Preparation of old Plastered or un-plastered surfaces of walls, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts treating oil and greasy spots etc and applying one coat of white wash on walls complete all as specified.

Material and Labour for applying 1 mm thick Birla/JK wall care white putty in two layers white wall care putty on complete removal of existing treatment externl or internal walls complete all as specified and directed.

Preparation of old treated surfaces (plastered or unplastered) including complete removal of existing treatment of wall cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorecent salts and trading oil and greasy spots old treated plastered surfaces of walls, cleaning of windows/ventilators glass panes & applying two coat of cement base paint complete all as specified and directed.

Material and Labour for two coat of synthetic enamel painting to wood surface of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of pink primer cpmplete all as specified and directed.

Material and Labour for two coat of synthetic enamel painting to steel surface of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of red oxide primer complete all as specified.

Material and labour Preparation of old painted wood or wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of approved shade & quality complete all as specified and directed.

Material and labour Preparation of old painted steel or iron based surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint of approved shade & quality complete all as specified and directed.

Material & labour for PCC 1:2:4 type B-1 ( using 20mm graded mechanically crushed stone aggregate) as in bed blocks, copings, apex stones,side of interlocking tiles etc complete all as specified and directed.

Demolition of PCC as in roof padding etc over roof surfaces exc. 4 mtr height from ground level complete all as specified and directed.

Material and Labour PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in roof padding & filling depressions etc & to maintain certain desired slopes.

Material and Labour for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for Non Approachable roofs-

(a) Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster.

(b) One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces.

(c) One layer of polymeric water proofing membrane of weight not less than 3.50 kg/Sqm consisting 90 micron thicken of central core shall be unrolled surfaces with lap of 100 mm and the over lap shall be sealed by flame.

(d) Applying two coats of aluminum paint on top of membrane @ 0.10Kg/Sqm.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Supply and Fixing Roof trusses (framed), trussed purlins crane gantries, railSupply and Fixingastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc fixed in poisition conforming to Fe-410 (Gde-250) complete all as speified and directed.

Material and labour for 100 mm thick plain cement concrete 1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregate), as in sub base , complete all as specified.

Supply and fixing for PCC plain or coloured interlocking (glossy finishing) paver blocks confirming to IS-15658-2006 of 60 mm thickness, M-35 grade as in hardstanding etc. laid over and including 40 mm thick screed or bedding layer of sand, complete all as specified

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in Hard Rock, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface, complete all as speified and directed.

Material and Labour Plain Cement Concrete 1:3:6 type C-1 (using 20mm graded mechanically crushed stone aggregate) as in foundations, filling and mass-concrete complete all as speified and directed.

Material and Labour 20mm thick Granite "Z" Black half moulded/rounded at all corners (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick Screed in CM (1:4)

Material and Labour RCC type B1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like

Material and Labour Mild steel TMT bars 8mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality

Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat

Supply and Fixing GI Tubes, `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 15mm bore

Supply and Fixing Bib taps 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule fancy type

Material and Labour coloured Glazed ceramic tiles in vertical serfaces 600 x 300 x 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles, complete all as specified and directed.

Supply and Fixing sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & waste; including bedding in CM to dwarf wall or including fixing cantilever brackets & connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

Supply and Fixing Waste fittings 32mm bore, brass, CP for glazed ware sinks, basins, etc. with long screwed shankSupply and Fixingly-nuts, flange end bedded in red lead cement & other end fixed

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles including necessary scaffolding, upto a height of 20meter complete all as specified and directed. Note: rate of scaffolding is included in unit rate.

Material and Labour Random rubble walling, uncoursed, well bonded, bedded and solidly hearted built in CM (1:4) including necessary scaffolding, upto a height of 20meter complete all as specified and directed. Note: rate of scaffolding is included in unit rate.

Random rubble walling, uncoursed, well bonded, bedded and solidly hearted built in CM (1:4) except stone including necessary scaffolding, upto a height of 20 meter complete all as specified and directed. Note: rate of scaffolding is included in unit rate.

Extra over stone walling for hammer dressing to face stones & dressing of face beds and joints, with max.depression on face from straight edge held against the dressed surface n exc.20mm in lime or sand stone, of random rubble walling, uncoursed or brought upto courses, including necessary scaffolding, upto a height of 20meter complete all as specified and directed. Note: rate of scaffolding is included in unit rate.

Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) including necessary scaffolding, upto a height of 20 meter complete all as specified and directed. Note: rate of scaffolding is included in unit rate.

Material and Labour Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) finished even & smooth (without using extra lime or cement) including taking down cement or cement lime plaster, any description including raking out joints, hacking for key, scrubbing down with water, etc. including necessary scaffolding, upto a height of 20 meter complete all as specified and directed. Note: rate of scaffolding is included in unit rate.

Material and Labour Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork or stone masonary surfaces including provision fo chicken wire mess fixed with nails 100mm long in CM (1:4) finished even & smooth (without using extra cement) including necessary scaffolding, upto a height of 20 meter complete all as specified and directed. Note: rate of scaffolding is included in unit rate.

Material and Labour PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate, including necessary scaffolding, upto a height of 20 meter complete all as specified and directed. Note: rate of scaffolding is included in unit rate.

Material and Labour PCC in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed type B1 (1:2:4) using 20 mm graded aggregate, including necessary scaffolding, upto a height of 20 meter complete all as specified and directed. Note: rate of scaffolding is included in unit rate.

Material and Labour PCC in surface channels and drains type B1 (1:2:4) using 20 mm graded stone aggregate, complete all as specified and directed.

Demolition of PCC of any description & in any position not otherwise specifically provided for (unreinforced) including necessary scaffolding, upto a height of 20 meter complete all as specified and directed. Note: rate of scaffolding is included in unit rate.

Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth, getting out in loose/ soft deposited material like soil/sand/ sludge, and removing form site n exc 50m but not exc 150 m & depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed.

Material and Labour for mixer of sand and saw dust in the ratio 2:1 (Two Part sand and one part saw dust) and forming embankment for firing range treverse upto a height of 20m including raising (or lowering) earth, spreading in layers n .exc 30 cm thick, watering, ramming / rolling and finishing to required size, shape, etc. upto a height of 10 meter above from base including forming the existing surface to receive the mixture of sand and saw dust inclding taking out stones and pabbles from the existing surface and removing the top layer of soil up to a distance of 250 meter from site etc complete all as specified and directed.

Material and Labour for sand bags filled with mixer of sand and saw dust in the ratio 2:1 (Two Part sand and one part saw dust) and forming embankment for firing range treverse upto a height of 20m complete all as specified and directed.

Applying two coats of cement base paint, white or tinted on new wall surface including preparation of surface. including necessary scaffolding, upto a height of 20 meter complete all as specified and directed. Note: rate of scaffolding is included in unit rate.

Taking down old unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, ceiling rose, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc. all as directed by engineer in charge.

Material and Labour for point wiring with 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated, FRLS and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continous earthing in & including PVC rigid conduit concealed with accessories having ISI mark fixed on wall surfaces / ceiling including provision of PVC box of appropriate size for fixing switches sockets etc. all as specified (Make of cable: Kalinga/Havells/Anchor) for One light point / Fan/ bell point controlled by one switch.

(a) One light point controlled by one 5 Amps switch

(b) One Fan point controlled by one 5 Amps switch

(c) One socket 3 Pin 5A pin socket oulet 5Amps on same board with cables 1.5 Sqmm size

(d ) One socket 3 Pin 5A pin socket oulet 5Amps on indepndent board with cables 1.5 Sqmm size.

(e) One socket 3 Pin 15A pin socket oulet 15Amps on indepndent board with cables 4 Sqmm size

Supply and Fixing switch piano flush type single pole one way 5/6 Amps. Make : Anchor / Leader/ Kinjal.

Supply and Fixing stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd

Supply and Fixing lamp holder Angle / batton type insulated body with back plate and to be fixed on PVC bock. Including dismantling old one. Make : Anchor / Leader/ Kinjal

Supply and Fixing socket outlet 5 pin 5/6 Amps flush type multipurpose suitable for 3 pin/2 pin plug complete including dismantling old one. Make : Anchor / Leader/ Kinjal

Supply and Fixing of switch piano15 Amp 230 Volt, flush button single pole one way complete all as specified and directed by Engr-in-Charge including dismantling old one. Make : Anchor / Leader / Kinjal

Supply and Fixing socket outlet 2 in 1, 3 pin 5/6 Amps and 3 pin 15/16 Amps flush type including old one Make : Anchor / Leader /Kinjal

Supply and Fixing ceiling rose surface tpe 3 terminals to be fixed on PVC block including dismantling old one. Make : Anchor / Leader / Kinjal

Supply and Fixing LED integrated batten tube light fittings 20/22 Watt 4 Feet long complete up with twin core twisted flexible copper conductor cable of size 23/0.0076 complete all as specfied and directed.

Material and Labour MCB SPN DB sheet metal enclosure double door suitable for mounting MCB 240 Volts with busbar 8 way including dismantling old one. Make : Havells / Legrand / Schneider/Standard

Material and Labour MCB SPN DB sheet metal enclosure double door suitable for mounting MCB 240 Volts with busbar 4 way including dismantling old one. Make : Havells / Legrand / Schneider/Standard

Supply and Fixing MCB SPN 230 Volts 40 Amps. Make : Havells/Legrand/Standard/ C&S

Supply and Fixing MCB SP 230 Volts 6- 32 Amps. Make : Havells/Legrand/Standard/ C&S

Fixing LED lamp 9W system lumen (NOM) 600 with all accessories all as specified and directed by Engr-in-Charge. Note: LED Bulbs will be issued under Sch 'B"

Hanging only ceiling fan (M.D.supply) and connecting up including provision of cable from ceiling rose or connector to fan

Supply and Fixing exhaust fans AC single phase 230/240Volts of size 150/200 mm sweep metal type with louver and complete accessories ,including making hole with suitable size for Exhaust Fan, after completion of work, finishing with cement and plastering and repainting with exisitng color all as specified and directed by Engr-in-charge.

Supply and Fixing exhaust fans AC single phase 230/240Volts of size 350/380 mm sweep metal type with louvers and complete accessories ,including making hole with suitable size for Exhaust Fan, after completion of work, finishing with cement and plastering and repainting with exisitng color all as specified and directed by Engr-in-charge.

Material & labour for earthing complete with galvanised steel earth plate electrode 60x60cmx6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below the ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or of steel all as shown in electrical plate No 3 of SSR part-I 2009 connected to main switch board all as specified and testing on completion including. Necessary excavation, earthwork, PCC works and CI earth pit cover with watering pipe 20mm dia GI pipe medium grade, funnel with wire mesh and lugs and GI pipe 15 mm dia of light grade, for protection of earth lead complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2 core

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core

Supply and Fixing Submain wiring alongwith earth wire with the following sizes of 2x2.5 sqmm + 1x1.5 sqmm FR PVC insulated copper conductor, single core cable in surface/recessed as required.

Supply and Fixing LED security light luminaries of 25 watt for energy saving having IP-65 degree of protection made of pressure die cast aluminum housing and heat resistant thoughned glass with excellent thermal management, LED's should have better optics and uniform distribution of light including GI tubing 40mm dia light grade 1.2 mtr long pipe bent to shape 120 degree for mounting of security light and fixed to wall/pole, with suitable MS clamps 2 Nos with nut and bolt and washers including connecting complete including 1.5 sqmm stranded copper conductor of suitable length as per direction and approved by Engr-in-charge, Make: Crompton or equivalent to phillips/Bajaj

M/s Ajay kumar Garge

naveen enterprises