Supply and Fixing of Furniture at Academic building, UG hostels and staff Quarters at College of Veterinary and Animal Sciences and college of Fisheri

Name of work : “Supply and Fixing of Furniture at Academic building, UG hostels and staff

Quarters at College of Veterinary and Animal Sciences and college of Fisheries for RLBCAU

Snos. Location Amount (INR)

1 Boys Hostel 237,58,824.46

2 Girls Hostel 237,58,824.46

3 Academic building 797,07,379.86

4 Lab Furniture of Academic building 745,63,561.62

5 Modular Kitchen 99,78,872.96

Digitally signed by ARTI

GUPTA 14:39:02 IST

Name of work : “Supply and Fixing of Furniture at Academic building, UG hostels and staff Quarters at College of Veterinary and Animal Sciences and college of Fisheries for RLBCAU at Datia, MP.”

BILL OF QUANTITIES OF FURNITURE FOR BOYS HOSTEL

Snos. Item Specifications Total Qty Unit Unit Rate (INR) Amount (INR) Reference Image

Supplying & placing in position Dormitory bed with ply having Overall dimensions 2050 x 973 x 720mm. Headboard

panels are made of 18mm thick Prelaminated Particle Board. All the exposed edges are edge banded with 2mm thick

PVC edge banding. Bed leg frame structure consists of metal frames made of MS 50 x 25mm box section in 1.2 mm

thickness. Internal pipes are made up of 19 x 19 mm box section in 0.9 mm thickness. headboard pipes are made of

1 Bed 25 x 25mm box section in 0.9mm thickness. Mattress holding bracket is made up of 0.6mm CRCA sheet. Knock down 267 Each 14,200.00 37,91,400.00

construction. 18 mm thick pre laminated particle board is in 4501. Bed leg frame structure is powder coated in matte

taupe white to thickness of 50 microns.The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007

Overall Size:Width - 900.0 mm Depth - 450.0 mm Height - 750.0 mm

Material:Top panel is made of 18 mm thick Prelaminated Particle Board All the exposed edges are edge banded with

2 mm thick PVC edge banding.

Structure consist of metal frames made of M.S. 25 mm Square Pipes in 0.9 mm Thickness. Drawer assembly consists of

drawer front made of 0.6mm CRCA sheet, drawer tray of 0.8mm CRCA sheet.Hardware :The high quality hardware

used .Construction:Knock Down construction.Packets:3 packets.

2 Study Table Finish:18 mm thick Prelaminated Particle Board is in 4501, 264 Each 11,013.00 29,07,432.00

make — GODREJ (SHIRVAL).Side frame structure and Back frame structure are powder coated in shade : MATT TAUPE

WHITE. REF NO. 9001904 to thickness of 50 microns (+-10).Rest all metals are powder coated in shade :

S/GCHARBROWN. REF NO. 9000605 to thickness of 50 microns (+-10).The OEM should be ISO 9001:2015,ISO

14001:2015 & ISO 18001:2007 certified.

The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded

polyurethane foam and upholstered with high stretch knitted polyester fabric. The back size shall be 45.5cm W x

53.0cm H. The HR polyurethane foam used in seat and back cushion is moulded in density 45kg per m3. The seat and

back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi dimensional

movement possibility just with a simple lean on the sides or back, without need for complex manual adjusments. The

cantilevered seat offers impact cushioning while seating and synchronises with the back movement during posture

changes. The ‘S: shaped spines moulded in high strength glass filled Polyamide and the spine connector moulded in

glass filled Polyamide form the back spine structure involved in multi dimensional recline motion. The variable tilt

angle recline motion can be adjusted with 3 position Tilt limiter feature which is inbuilt in saet base and the tension is

3 Study Chair user weight dependent. The adjustable armrests assembly consists of armrest housing sliding over the armrest 264 Each 11,441.00 30,20,424.00

structure, both moulded in glass filled Polyamide. The pneumatic height adjustment shall have a stroke of 9.2cm.The

pedestal is injection moulded in glass filled Polyamide and fitted with 5 nos. twin wheel castors. The pedestal is 66cm

pitch centre diameter and 76cm with castors. The overall dimensions of the chair shall be 76cmx 76cm x(99.5-

108.8cm). The seat height shall be (44.5-53.8cm).The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO

18001:2007 certified. & product must be greenguard certified by UL.

Digitally signed by ARTI

GUPTA 14:39:02 IST

The overall size shall be 2025(H) x 1000(W) x 500(D). The add on units are stacked width wise to form a row of storage

having common side panel. The legs shall be of 45mm height and fitted with screw type leveler.The material shall be a

combination of CRDA 0.5mm and 0.8mm thickness. Each full shelf shall have a load capacity of max. 40 Kg UDL . The

coating shall be of Epoxy Polyester Powder of 50 microns(± 10 microns) thickness. The wooden door shall be of size

4 Wardrobe - GAIN 448(W) x 18(T) x 1978 (H). It shall be a 3 way locking door made of MDF and Honeycomb covered with decorative and 267 Each 33,460.00 89,33,820.00

backing laminate. the locking shall self closing hinges. 2mm thick lipping is done on all edges. It shall have Self closing

Hinge. The product must be UL Greenguard certified. The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO

18001:2007 certified.

Supplying and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be 2060W x 905D x 855H. The

seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam

with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be

made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2

kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot

5 Sofa 3 seater pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section 2 Each 40,183.00 80,366.00

deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over

understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202) tube &

plate with plastic endcap.The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing

with understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall

6 Center table dimensions of table shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.The OEM should be ISO 2 Each 12,760.00 25,520.00

Supplying and placing in position Main desk of the following specifications. Main Desk size shall be 1500 Width x 750

Depth x 743 Height.Top shall be of 18 mm thickness made of PLT board with 2 mm Edge banding. Wenge and

savannah Maple PLT board shall be used. The Understructure shall be in pre-laminated panels made with PLT boards .

2- Drawerand 3 - Drawer storage units with different combinations to support tops made with 18 mm PLT boards of

7 Supervisor Table different colours.Modesty and back panels made with 18 mm PLT boards. The pedestals / storages shall be fitted with 1 Each 23,385.00 23,385.00

necessary locks. The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified.

Digitally signed by ARTI

GUPTA 14:39:02 IST

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled

nylon & upholstered using Micro mesh fabric with high tenacity yarn with 28 density foam sandwich in lumbar area.

Seat Size:- 47cm(w) × 51.5cm (D). Back size- 45cm x 65.3cm. The HR polyurathene foam is moulded with density =45+/-

2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down adjustment of

8.0 ± 0.5cm which is provided in armrest structure. Fixed armrest top is PU moulded over metal insert. It shall have

Front pivot synchro mechanism with following features. 360 degree revolving type, Single point control, front fivot

tilt, tilt tension adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of 1:2. The lumber

support consists of polypropylene pad with mouled polyurathene foam & covered with polyester fabric. The height of

lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumber pad has an

8 Supervisor Chair adjustment of 8.0± 0.5 cm in height. The pneumatic height adjustment has an adjustment stroke of 10cm. The 1 Each 12,668.00 12,668.00

pedestal is injection moulded in black 30% glass filled nylon and fitted with 5nos. twin wheel castors. The pedestal

pitch diameter is 66cm. This shall come along a headrest assembly consisting of polypropylene pad with lumbr

support and covered with polyester fabric. Neckrest assembly has an adjustment stroke of 4.2cm and otation

adjustment stroke of 76 degrees. The work shall be carried out as per guidance and instructions recieved from

Engineer Incharge. The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified.

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled

nylon & upholstered using Micro mesh fabric with high tenacity yarn with 28 density foam sandwich in lumbar area.

Seat Size:- 47cm(w) × 51.5cm (D). Back size- 45cm x 65.3cm. The HR polyurathene foam is moulded with density =45+/-

2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down adjustment of

8.0 ± 0.5cm which is provided in armrest structure. Fixed armrest top is PU moulded over metal insert. It shall have

Front pivot synchro mechanism with following features. 360 degree revolving type, Single point control, front fivot

tilt, tilt tension adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of 1:2. The lumber

Supervisor Visitor support consists of polypropylene pad with mouled polyurathene foam & covered with polyester fabric. The height of

9 lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumber pad has an 2 Each 11,735.00 23,470.00

adjustment of 8.0± 0.5 cm in height. The pneumatic height adjustment has an adjustment stroke of 10cm. The

pedestal is injection moulded in black 30% glass filled nylon and fitted with 5nos. twin wheel castors. The pedestal

pitch diameter is 66cm. The work shall be carried out as per guidance and instructions recieved from Engineer

Incharge. The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified.

Providing and Palcing in place of canteen table. The overall dimensions of the tbale shall be 1500 x 750 x 750mm.

Tablr top shall be made from 25mm thick MDF OSR board with membrane coating on top side. Legs are made by

welding the combination of MS ERW round tube of dimater 63.5mm x 2mm thick. Flamges of 1.6mm thick CRCA and

1.2mm thick. Insde platew are made from HR 5mm thick sheet. Assembly is epoxy polyester powder coated. Table top

folds upside at offset center pivot provided on support bracket which is Aluminium alloy pressure die cast part coated

with epoxy olyester powder caoted min. 40 microns. Table top connected with spring loaded mechanism with

10 Café Table membranell handle made of snadwich tubes of MS ERW 1.2mm thick and 1.6mm thick tubes. Coated with epoxy 28 Each 23,316.00 6,52,848.00

polyester powder coated min. 40 microns. Legs are provided with casters of 65mm diameter loackable type for ease

of movement and can be locked when required at any position. The OEM should be ISO 9001:2015,ISO 14001:2015 &

ISO 18001:2007 certified.

Digitally signed by ARTI

GUPTA 14:39:02 IST

The seat and Back are made up of injection moulded high impact strength PolyPropylene polymer compound with

indoor grade UV resistance. Seat size shall be 52.5cm x 53.2cm. Back size shall be 51.6cm x 40.5cm. The tubular

welded frame is made of dia. 2.22cm x 0.12cm and 3.5cm x 1.5cm x 0.12cm stainless steel 202 grade tube. The rubes

are buff polished to give shiny finish. The shoes and Amrest are made of high impacy strength PolyPropylene polyemr

11 Cafe Chair compound with indoor grade UV resistance and pressed and press fitted with tubular frame. The overall dimensions 168 Each 3,948.00 6,63,264.00

of the chair shall be 52.4cm x 55.8cm x 84.5cm. The seating height shall be 45.0cm.The OEM should be ISO

Grand Total 237,58,824.46

Grand Total 237,58,824.46

Digitally signed by ARTI

GUPTA 14:39:02 IST

Name of work : “Supply and Fixing of Furniture at Academic building, UG hostels and staff Quarters at College of Veterinary and Animal Sciences and college of Fisheries for RLBCAU at Datia, MP.”

BILL OF QUANTITIES OF FURNITURE FOR GIRLS HOSTEL

Snos. Item Specifications Total Qty Unit Unit Rate (INR) Amount (INR) Reference Image

Supplying & placing in position Dormitory bed with ply having Overall dimensions 2050 x 973 x 720mm. Headboard

panels are made of 18mm thick Prelaminated Particle Board. All the exposed edges are edge banded with 2mm thick

PVC edge banding. Bed leg frame structure consists of metal frames made of MS 50 x 25mm box section in 1.2 mm

thickness. Internal pipes are made up of 19 x 19 mm box section in 0.9 mm thickness. headboard pipes are made of

1 Bed 25 x 25mm box section in 0.9mm thickness. Mattress holding bracket is made up of 0.6mm CRCA sheet. Knock down 267 Each 14,200.00 37,91,400.00

construction. 18 mm thick pre laminated particle board is in 4501. Bed leg frame structure is powder coated in matte

taupe white to thickness of 50 microns.The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007

Overall Size:Width - 900.0 mm Depth - 450.0 mm Height - 750.0 mm

Material:Top panel is made of 18 mm thick Prelaminated Particle Board All the exposed edges are edge banded with

2 mm thick PVC edge banding.

Structure consist of metal frames made of M.S. 25 mm Square Pipes in 0.9 mm Thickness. Drawer assembly consists of

drawer front made of 0.6mm CRCA sheet, drawer tray of 0.8mm CRCA sheet.Hardware :The high quality hardware

used .Construction:Knock Down construction.Packets:3 packets.

2 Study Table Finish:18 mm thick Prelaminated Particle Board is in 4501, 264 Each 11,013.00 29,07,432.00

make — GODREJ (SHIRVAL).Side frame structure and Back frame structure are powder coated in shade : MATT TAUPE

WHITE. REF NO. 9001904 to thickness of 50 microns (+-10).Rest all metals are powder coated in shade :

S/GCHARBROWN. REF NO. 9000605 to thickness of 50 microns (+-10).The OEM should be ISO 9001:2015,ISO

14001:2015 & ISO 18001:2007 certified.

The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded

polyurethane foam and upholstered with high stretch knitted polyester fabric. The back size shall be 45.5cm W x

53.0cm H. The HR polyurethane foam used in seat and back cushion is moulded in density 45kg per m3. The seat and

back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi dimensional

movement possibility just with a simple lean on the sides or back, without need for complex manual adjusments. The

cantilevered seat offers impact cushioning while seating and synchronises with the back movement during posture

changes. The ‘S: shaped spines moulded in high strength glass filled Polyamide and the spine connector moulded in

glass filled Polyamide form the back spine structure involved in multi dimensional recline motion. The variable tilt

angle recline motion can be adjusted with 3 position Tilt limiter feature which is inbuilt in saet base and the tension is

3 Study Chair user weight dependent. The adjustable armrests assembly consists of armrest housing sliding over the armrest 264 Each 11,441.00 30,20,424.00

structure, both moulded in glass filled Polyamide. The pneumatic height adjustment shall have a stroke of 9.2cm.The

pedestal is injection moulded in glass filled Polyamide and fitted with 5 nos. twin wheel castors. The pedestal is 66cm

pitch centre diameter and 76cm with castors. The overall dimensions of the chair shall be 76cmx 76cm x(99.5-

108.8cm). The seat height shall be (44.5-53.8cm).The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO

18001:2007 certified. & product must be greenguard certified by UL.

Digitally signed by ARTI

GUPTA 14:39:02 IST

The overall size shall be 2025(H) x 1000(W) x 500(D). The add on units are stacked width wise to form a row of storage

having common side panel. The legs shall be of 45mm height and fitted with screw type leveler.The material shall be a

combination of CRDA 0.5mm and 0.8mm thickness. Each full shelf shall have a load capacity of max. 40 Kg UDL . The

coating shall be of Epoxy Polyester Powder of 50 microns(± 10 microns) thickness. The wooden door shall be of size

4 Wardrobe - GAIN 448(W) x 18(T) x 1978 (H). It shall be a 3 way locking door made of MDF and Honeycomb covered with decorative and 267 Each 33,460.00 89,33,820.00

backing laminate. the locking shall self closing hinges. 2mm thick lipping is done on all edges. It shall have Self closing

Hinge. The product must be UL Greenguard certified. The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO

18001:2007 certified.

Supplying and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be 2060W x 905D x 855H. The

seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam

with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be

made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2

kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot

5 Sofa 3 seater pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section 2 Each 40,183.00 80,366.00

deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over

understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202) tube &

plate with plastic endcap.The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing

with understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall

6 Center table dimensions of table shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.The OEM should be ISO 2 Each 12,760.00 25,520.00

Supplying and placing in position Main desk of the following specifications. Main Desk size shall be 1500 Width x 750

Depth x 743 Height.Top shall be of 18 mm thickness made of PLT board with 2 mm Edge banding. Wenge and

savannah Maple PLT board shall be used. The Understructure shall be in pre-laminated panels made with PLT boards .

2- Drawerand 3 - Drawer storage units with different combinations to support tops made with 18 mm PLT boards of

7 Supervisor Table different colours.Modesty and back panels made with 18 mm PLT boards. The pedestals / storages shall be fitted with 1 Each 23,385.00 23,385.00

necessary locks. The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified.

Digitally signed by ARTI

GUPTA 14:39:02 IST

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled

nylon & upholstered using Micro mesh fabric with high tenacity yarn with 28 density foam sandwich in lumbar area.

Seat Size:- 47cm(w) × 51.5cm (D). Back size- 45cm x 65.3cm. The HR polyurathene foam is moulded with density =45+/-

2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down adjustment of

8.0 ± 0.5cm which is provided in armrest structure. Fixed armrest top is PU moulded over metal insert. It shall have

Front pivot synchro mechanism with following features. 360 degree revolving type, Single point control, front fivot

tilt, tilt tension adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of 1:2. The lumber

support consists of polypropylene pad with mouled polyurathene foam & covered with polyester fabric. The height of

lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumber pad has an

8 Supervisor Chair adjustment of 8.0± 0.5 cm in height. The pneumatic height adjustment has an adjustment stroke of 10cm. The 1 Each 12,668.00 12,668.00

pedestal is injection moulded in black 30% glass filled nylon and fitted with 5nos. twin wheel castors. The pedestal

pitch diameter is 66cm. This shall come along a headrest assembly consisting of polypropylene pad with lumbr

support and covered with polyester fabric. Neckrest assembly has an adjustment stroke of 4.2cm and otation

adjustment stroke of 76 degrees. The work shall be carried out as per guidance and instructions recieved from

Engineer Incharge. The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified.

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled

nylon & upholstered using Micro mesh fabric with high tenacity yarn with 28 density foam sandwich in lumbar area.

Seat Size:- 47cm(w) × 51.5cm (D). Back size- 45cm x 65.3cm. The HR polyurathene foam is moulded with density =45+/-

2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down adjustment of

8.0 ± 0.5cm which is provided in armrest structure. Fixed armrest top is PU moulded over metal insert. It shall have

Front pivot synchro mechanism with following features. 360 degree revolving type, Single point control, front fivot

tilt, tilt tension adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of 1:2. The lumber

Supervisor Visitor support consists of polypropylene pad with mouled polyurathene foam & covered with polyester fabric. The height of

9 lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumber pad has an 2 Each 11,735.00 23,470.00

adjustment of 8.0± 0.5 cm in height. The pneumatic height adjustment has an adjustment stroke of 10cm. The

pedestal is injection moulded in black 30% glass filled nylon and fitted with 5nos. twin wheel castors. The pedestal

pitch diameter is 66cm. The work shall be carried out as per guidance and instructions recieved from Engineer

Incharge. The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified.

Providing and Palcing in place of canteen table. The overall dimensions of the tbale shall be 1500 x 750 x 750mm.

Tablr top shall be made from 25mm thick MDF OSR board with membrane coating on top side. Legs are made by

welding the combination of MS ERW round tube of dimater 63.5mm x 2mm thick. Flamges of 1.6mm thick CRCA and

1.2mm thick. Insde platew are made from HR 5mm thick sheet. Assembly is epoxy polyester powder coated. Table top

folds upside at offset center pivot provided on support bracket which is Aluminium alloy pressure die cast part coated

with epoxy olyester powder caoted min. 40 microns. Table top connected with spring loaded mechanism with

10 Café Table membranell handle made of snadwich tubes of MS ERW 1.2mm thick and 1.6mm thick tubes. Coated with epoxy 28 Each 23,316.00 6,52,848.00

polyester powder coated min. 40 microns. Legs are provided with casters of 65mm diameter loackable type for ease

of movement and can be locked when required at any position. The OEM should be ISO 9001:2015,ISO 14001:2015 &

ISO 18001:2007 certified.

Digitally signed by ARTI

GUPTA 14:39:02 IST

The seat and Back are made up of injection moulded high impact strength PolyPropylene polymer compound with

indoor grade UV resistance. Seat size shall be 52.5cm x 53.2cm. Back size shall be 51.6cm x 40.5cm. The tubular

welded frame is made of dia. 2.22cm x 0.12cm and 3.5cm x 1.5cm x 0.12cm stainless steel 202 grade tube. The rubes

are buff polished to give shiny finish. The shoes and Amrest are made of high impacy strength PolyPropylene polyemr

11 Cafe Chair compound with indoor grade UV resistance and pressed and press fitted with tubular frame. The overall dimensions 168 Each 3,948.00 6,63,264.00

of the chair shall be 52.4cm x 55.8cm x 84.5cm. The seating height shall be 45.0cm.The OEM should be ISO

Grand Total 237,58,824.46

Grand Total 237,58,824.46

Digitally signed by ARTI

GUPTA 14:39:02 IST

Name of work : “Supply and Fixing of Furniture at Academic building, UG hostels and staff Quarters at College of Veterinary and Animal Sciences and college of Fisheries for RLBCAU at Datia, MP.”

BILL OF QUANTITIES OF FURNITURE FOR ACADEMIC BUILDING

Snos. Location Item Specifications Total Qty Unit Unit Rate (INR) Amount (INR) Reference Image

Supplying and placing in position Main table of the following specifications. The Main table shall be of size 2400 Width mm x 900

mm Depth x 750 mm height. Top surface of the table shall made up of MDF (Medium density fibre ) board duly finished with

Veneer and final coating of PU. The Main desk should contain in built key board pull out tray for keeping keyboard of computer.

The front modesty panel of the table shall be made up of MDF board of size 1640 mm x 600 mm x 16mm which shall also be

duly finished with Veener and PU coating. For personal storage one mobile pedestal (3 drawer unit) shall be provided of size 510

mm Width x 635 mm Height and 445 mm Depth. The storage pedestal shall also be made up of MDF duly finished with veener &

final coating of PU. The Side shall be of size 1200mm Width x 445mm Depth x 660 mm Height. The side unit shall be made up of

1 Dean Room Main Table MDF board duly finshed with Veneer and final finish by PU Coating. The design of the side unit shall be such that it can be placed 2 Each 1,32,621.00 2,65,242.00

on either side of the main table. The side unit shall contain open space for keeping cpu in extreme right side, one closed storage

shutter at extreme left end & open space in the middle with one shelf for keeping files. The thickness of the top of the side unit

shall be 25mm.The product should be AIOTA certified.The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007

The back unit shall be made up of MDF board duly finished with veneer & final finish by PU coating. Below storage shall be

provided with wooden shutters & the upper left & right side of the back unit shall also be provided with wooden shutters. The

middle 3 door shutters should be of glass of minimum 5mm thick for display purpose. The OEM should be ISO 9001:2015,ISO

2 Back Unit 14001:2015 & ISO 18001:2007 D6The hardness of the PU coating shall be 1.5H. The overall dimensions of the back unit shall be 2 Each 93,012.00 1,86,024.00

2215mm x 410mm x 2000mm. .The product should be AIOTA certified.The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO

18001:2007 certified.

The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood & upholstered with leather and moulded polyurethane

foam. The back shall be designed with contoured lumber support for extra comfort. Size of back shall be W-53cm, H-95.4cm &

size of seat shall be W-54.6cm x D-49cm. High Resilience (HR) foam should be used in making seat & back which shall be

moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression. The seat and back

should be arrested together with spine made of 0.8 +/- 0.05 cm thick HR steel and should be powder coated in black with 40-60

micron DFT (Dry film thickness). The armrest assembly should be made up of armrest tube, PU armrest and the armrest top. The

armrest tube assy. shall be made of 2.54+/- 0.03cm x 0.16 +/- 0.0128 cm M.S E.R.W support tubes and chrome plated. The P.U

armrest shall be made up of black integral skin polyurethane with 50-70 shore 'A' hardness reinforced with M.S insert. The

armrest top shall be made up of ABS & upholstered with foam & leather. It shsall have front Pivot synchro tilt mechanism. The

mechanism of the chair shall have following features : 360⁰ revolving type, Knee Tilt system, Seat & back tilting ration of 1: 1.5,

Front pivot for tilt with feet resting on ground ensuring more comfort, Tilt tension adjustment, 5-position locking with antilock

back mechanism which should prevent the backrest from impacting the user when the lock is released, Static seat depth

3 Main Chair adjustment 5.0 +/- 0.5cm with 5 position locking. The chair shall be provided with pneumatic height adjustment which shall have 2 Each 41,157.00 82,314.00

stroke of 9.0 +/- 0.3 cm. The bellow should be single piece duly blow moulded in black polypropylene. The pedestal shall be

made of die-cast aluminium with buffing finish. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be

67.0 +/- 0.5 cm pitch-centre-dia (77.0 +/- 1.0 cm with castors). The twin wheel castors shall be made of Nylon injection moulded

in black color. Overall dimensions of Chair shall be, Width of Chair - 77cm, Depth of Chair - 77 cm as measured from pedestal

below. Height of back from ground - min 128.0 to max 137.0 cms. Seat height - min 49.9cm to max 58.9 cm. Dimensions

tolerance / variations shall be within +/- 1 cm. The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified.

& product must be greenguard certified by UL.

Digitally signed by ARTI

GUPTA 14:39:02 IST

The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood & upholstered with leather and moulded polyurethane

foam. The back shall be designed with contoured lumber support for extra comfort. Size of back shall be W-53cm, H-73cm & size

of seat shall be W-54.6cm x D-49cm. High Resilience (HR) foam should be used in making seat & back which shall be moulded

with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression. The seat and back should be

arrested together with spine made of 0.8 +/- 0.05 cm thick HR steel and should be powder coated in black with 40-60 micron

DFT (Dry film thickness). The armrest assembly should be made up of armrest tube, PU armrest and the armrest top. The

armrest tube assy. shall be made of 2.54+/- 0.03cm x 0.16 +/- 0.0128 cm M.S E.R.W support tubes and chrome plated. The P.U

armrest shall be made up of black integral skin polyurethane with 50-70 shore 'A' hardness reinforced with M.S insert. The

armrest top shall be made up of ABS & upholstered with foam & leather. The mechanism of the chair shall have following

features : 360⁰ revolving type without back tilt. The chair shall be provided with pneumatic height adjustment which shall have

4 Visitor Chair 12 Each 35,906.00 4,30,872.00

stroke of 12.0 +/- 0.3 cm. The beloow should be made up of 3 piece telescopic type & injection moulded in black polypropylene.

The pedestal shall be made of die-cast aluminium with buffing finish. it shall be fitted with 5 nos twin wheel castor. The size of

the pedestal shall be 67.0 +/- 0.5 cm pitch-centre-dia (77.0 +/- 1.0 cm with castors). The twin wheel castors shall be made of

Nylon injection moulded in black color. Overall dimensions of Chair shall be, Width of Chair - 77cm, Depth of Chair - 77 cm as

measured from pedestal below. Height of back from ground - min 99.4 to max 111.4 cms. Seat height - min 43.4cm to max 55.4

cm. Dimensions tolerance / variations shall be within +/- 1 cm. The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO

18001:2007 certified. & product must be greenguard certified by UL.

Providing and Placing in place of 2 seater sofa. The overall dimensions shall be 1560 x 935 x 890mm. Understructure is made up

of combination of plywood & pinewood members. Plywood is 12±1mm thk. [moisture resistance & termite proof as per IS:303]

& pinewood are of cross sections 22x64mm, 34x64mm & 16x35mm without having major knots & defects on the surface. Zigzag

spring of dia. 3.8mm is mounted on the seat structure using plastic spring mounting clip for support & additional cushioning

purpose. Non woven fabric is stapled on the seat structure frame above the spring asly. to avoid direct contact between the

metal springs and the seat foam. Powder coated MS support pipe is fitted with the wooden seat frame to give additional

5 Sofa 2S strength to the structure. Seat is made of PU foam with density 28 kg/m3 with a top layer of supersoft PU foam with density 4 Each 32,934.00 1,31,736.00

32kg/m3. Recron sheet of 200GSM is wrapped & glued above this seat top foam. Seat front bottom is glued with the PU foam

with density 28 kg/m3. : Seat upholstery is made in polyester fabric, having pockets to insert the seat foam. The fabric has a

special coating which gives it a leather like feel. Plastic legs with the M8 stud are fitted at the bottom surface of both the

armrests and on front of the seat.The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified

Supplying &placing in position Center Table of following specifications. Wooden Tea table having SOLID VENEER MDF TABLE TOP

WITH 18 mm thickness and Solid rubber wood legs. Dimensions: 1200 x 600 x 378 .The OEM should be ISO 9001:2015,ISO

6 Center Table 14001:2015 & ISO 18001:2007 certified 2 Each 9,823.00 19,646.00

Providingin place of main table with overall size of table 2350 x 2350 x 750mm. The main table shall be of size 2350 x 1150 x

750mm. The side unit shall be 1200 x 600 x 750mm. The table is made of 25 mm thick MDF – one side pre-laminate board

confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box are

provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board

confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick MDF

one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is

made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC

7 HOD Room Main Table lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with 18 Each 1,07,716.00 19,38,888.00

matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC

membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel

Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease

of opening. Pedestals are provided with lock for security.The prodcut should be GREENHGUARD ,AIOTA & GRIHA certified.The

OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified.

Digitally signed by ARTI

GUPTA 14:39:02 IST

The Back Unit shall be of dimensions 1800 x 500 x 750mm. It shall be made of 25mm thick MDF – one side pre-laminate board

confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. The Slide door unit is made of 25 mm thick Pre-

laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Shutters have a

8 Back Unit soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for security.The 18 Each 44,661.00 8,03,898.00

prodcut should be GREENHGUARD ,AIOTA & GRIHA certified.The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO

18001:2007 certified.

Supplying & placing of High back chair with following specifications :SEAT ASSEMBLY : The Cushioned seat should be made of

Injection molded Plastic outer & inner. Plastic Inner should be made up of upholstered with leatherette and moulded High

Resilience (HR) Polyurethane

foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.

*Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) BACK ASSEMBLY: The Cushioned back should be made of PU Foam with insitumolded

MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. HIGH BACK SIZE: 47.7 cm. (W) x

76.4 cm : The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular

armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height

adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism should be designed

with the following features: • 360' revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar

support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving

option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC

9 Marvel Main Chair Aluminium black powder coated. SEAT DEPTH ADJUSTMENT : Seat depth adjustment should be integrated in the seat through a

sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT: Back Frame should be

connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable

back support to suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic ht adjustment has an adjustment stroke of

10.0±0.3 cm. PEDESTAL ASSEMBLY: The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos.

twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) TWIN WHEEL CASTORS:

The twin wheel castors should be injection moulded in black PP having 6.0± 0.1cm wheel Diameter..The product should be

Greenguard certified by UL and ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified along with GRIHA ,Green pro and SAS

Supplying & placing of mid back chair with following specificationsSEAT ASSEMBLY : The Cushioned seat should be made of

Injection molded Plastic outer & inner. Plastic

Inner should be made up of upholstered with leatherette and moulded High Resilience (HR) Polyurethane

foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.

*Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) BACK ASSEMBLY: The Cushioned back should be made of PU Foam with insitumolded

MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. HIGH BACK SIZE: 47.7 cm. (W) x

76.4 cm : The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular

armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height

adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism should be designed

with the following features: • 360' revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar

support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving

option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC

10 Marvel visitor Visitor Chair 108 Each 19,431.00 20,98,548.00

Aluminium black powder coated. SEAT DEPTH ADJUSTMENT : Seat depth adjustment should be integrated in the seat through a

sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT: Back Frame should be

connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable

back support to suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic ht adjustment has an adjustment stroke of

10.0±0.3 cm. PEDESTAL ASSEMBLY: The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos.

twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) TWIN WHEEL CASTORS:

The twin wheel castors should be injection moulded in black PP having 6.0± 0.1cm wheel Diameter.The product should be

Greenguard certified by UL and ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certidied along with GRIHA ,Green pro and

Digitally signed by ARTI

GUPTA 14:39:02 IST

Providing and Placing in place of 2 seater sofa. The overall dimensions shall be 1560 x 935 x 890mm. Understructure is made up

of combination of plywood & pinewood members. Plywood is 12±1mm thk. [moisture resistance & termite proof as per IS:303]

& pinewood are of cross sections 22x64mm, 34x64mm & 16x35mm without having major knots & defects on the surface. Zigzag

spring of dia. 3.8mm is mounted on the seat structure using plastic spring mounting clip for support & additional cushioning

purpose. Non woven fabric is stapled on the seat structure frame above the spring asly. to avoid direct contact between the

metal springs and the seat foam. Powder coated MS support pipe is fitted with the wooden seat frame to give additional

11 Pisa 2 s Sofa 2S strength to the structure. Seat is made of PU foam with density 28 kg/m3 with a top layer of supersoft PU foam with density 36 Each 32,934.00 11,85,624.00

32kg/m3. Recron sheet of 200GSM is wrapped & glued above this seat top foam. Seat front bottom is glued with the PU foam

with density 28 kg/m3. : Seat upholstery is made in polyester fabric, having pockets to insert the seat foam. The fabric has a

special coating which gives it a leather like feel. Plastic legs with the M8 stud are fitted at the bottom surface of both the

armrests and on front of the seat.The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified

Supplying &placing in position Center Table of following specifications. Wooden Tea table having SOLID VENEER MDF TABLE TOP

WITH 18 mm thickness and Solid rubber wood legs. Dimensions: 1200 x 600 x 378 .The OEM should be ISO 9001:2015,ISO

14001:2015 & ISO 18001:2007 certified

12 Center Table 18 Each 9,823.00 1,76,814.00

Providingin place of main table with overall size of table 1800 x 2100 x 750mm. The main table shall be of size 1800 x 900 x

750mm. The side unit shall be 1200 x 500 x 750mm. The table is made of 25 mm thick MDF – one side pre-laminate board

confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box are

provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board

confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick MDF

one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is

made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC

Professor / Asst. lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with

Registrar matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC

membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel

Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease

of opening. Pedestals are provided with lock for security.The prodcut should be GREENHGUARD ,AIOTA & GRIHA certified.The

OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified.

The Back Unit shall be of dimensions 1650 x 500 x 750mm. It shall be made of 25mm thick MDF – one side pre-laminate board

confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. The Slide door unit is made of 25 mm thick Pre-

laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Shutters have a

14 Back Unit soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for security.The 20 Each 44,427.00 8,88,540.00

prodcut should be GREENHGUARD ,AIOTA & GRIHA certified.The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO

18001:2007 certified.

Digitally signed by ARTI

GUPTA 14:39:02 IST

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon &

upholstered using Micro mesh fabric with high tenacity yarn with 28 density foam sandwich in lumbar area. Seat Size:- 47cm(w)

× 51.5cm (D). Back size- 45cm x 65.3cm. The HR polyurathene foam is moulded with density =45+/-2 kg/m cube and hardness

16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down adjustment of 8.0 ± 0.5cm which is provided in

armrest structure. Fixed armrest top is PU moulded over metal insert. It shall have Front pivot synchro mechanism with

following features. 360 degree revolving type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking with

anti- shock feature, seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with mouled polyurathene

foam & covered with polyester fabric. The height of lumber pad can be adjusted through two projecting knobs provided on the

15 Main Chair rear side of the pad. Lumber pad has an adjustment of 8.0± 0.5 cm in height. The pneumatic height adjustment has an 20 Each 12,668.00 2,53,360.00

adjustment stroke of 10cm. The pedestal is injection moulded in black 30% glass filled nylon and fitted with 5nos. twin wheel

castors. The pedestal pitch diameter is 66cm. This shall come along a headrest assembly consisting of polypropylene pad with

lumbr support and covered with polyester fabric. Neckrest assembly has an adjustment stroke of 4.2cm and otation adjustment

stroke of 76 degrees. The work shall be carried out as per guidance and instructions recieved from Engineer Incharge. The OEM

should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified. & product must be greenguard certified by UL.

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon &

upholstered using Micro mesh fabric with high tenacity yarn with 28 density foam sandwich in lumbar area. Seat Size:- 47cm(w)

× 51.5cm (D). Back size- 45cm x 65.3cm. The HR polyurathene foam is moulded with density =45+/-2 kg/m cube and hardness

16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down adjustment of 8.0 ± 0.5cm which is provided in

armrest structure. Fixed armrest top is PU moulded over metal insert. It shall have Front pivot synchro mechanism with

following features. 360 degree revolving type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking with

anti- shock feature, seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with mouled polyurathene

16 Visitor Chair foam & covered with polyester fabric. The height of lumber pad can be adjusted through two projecting knobs provided on the 60 Each 11,735.00 7,04,100.00

rear side of the pad. Lumber pad has an adjustment of 8.0± 0.5 cm in height. The pneumatic height adjustment has an

adjustment stroke of 10cm. The pedestal is injection moulded in black 30% glass filled nylon and fitted with 5nos. twin wheel

castors. The pedestal pitch diameter is 66cm. The work shall be carried out as per guidance and instructions recieved from

Engineer Incharge. The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified. & product must be

greenguard certified by UL.

Supplying and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be 2060W x 905D x 855H. The seat

should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ±

2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with

Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or

leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and

17 Sofa 3S termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 20 Each 40,183.00 8,03,660.00

3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made

in Stainless steel (grade SS 202) tube & plate with plastic endcap.The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO

18001:2007 certified

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with

understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of

table shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.The OEM should be ISO 9001:2015,ISO 14001:2015 &

18 Center Table ISO 18001:2007 certified 20 Each 12,760.00 2,55,200.00

Digitally signed by ARTI

GUPTA 14:39:02 IST

Providingin place of main table with overall size of table 1650 x 1650 x 750mm. The main table shall be of size 1650 x 750 x

750mm. The side unit shall be 900 x 500 x 750mm. The table is made of 25 mm thick MDF – one side pre-laminate board

confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box are

provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board

confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick MDF

one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is

made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC

Asst. Prof./Dean

19 Main Table lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with 57 Each 81,528.00 46,47,096.00

matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC

membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel

Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease

of opening. Pedestals are provided with lock for security.The prodcut should be GREENHGUARD ,AIOTA & GRIHA certified.D5

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon &

upholstered using Micro mesh fabric with high tenacity yarn with 28 density foam sandwich in lumbar area. Seat Size:- 47cm(w)

× 51.5cm (D). Back size- 45cm x 65.3cm. The HR polyurathene foam is moulded with density =45+/-2 kg/m cube and hardness

16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down adjustment of 8.0 ± 0.5cm which is provided in

armrest structure. Fixed armrest top is PU moulded over metal insert. It shall have Front pivot synchro mechanism with

following features. 360 degree revolving type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking with

anti- shock feature, seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with mouled polyurathene

foam & covered with polyester fabric. The height of lumber pad can be adjusted through two projecting knobs provided on the

20 rear side of the pad. Lumber pad has an adjustment of 8.0± 0.5 cm in height. The pneumatic height adjustment has an 57 Each 12,668.00 7,22,076.00

adjustment stroke of 10cm. The pedestal is injection moulded in black 30% glass filled nylon and fitted with 5nos. twin wheel

castors. The pedestal pitch diameter is 66cm. This shall come along a headrest assembly consisting of polypropylene pad with

lumbr support and covered with polyester fabric. Neckrest assembly has an adjustment stroke of 4.2cm and otation adjustment

stroke of 76 degrees. The work shall be carried out as per guidance and instructions recieved from Engineer Incharge. The OEM

should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified. & product must be greenguard certified by UL.

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon &

upholstered using Micro mesh fabric with high tenacity yarn with 28 density foam sandwich in lumbar area. Seat Size:- 47cm(w)

× 51.5cm (D). Back size- 45cm x 65.3cm. The HR polyurathene foam is moulded with density =45+/-2 kg/m cube and hardness

16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down adjustment of 8.0 ± 0.5cm which is provided in

armrest structure. Fixed armrest top is PU moulded over metal insert. It shall have Front pivot synchro mechanism with

following features. 360 degree revolving type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking with

anti- shock feature, seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with mouled polyurathene

21 Visitor Chair foam & covered with polyester fabric. The height of lumber pad can be adjusted through two projecting knobs provided on the 114 Each 11,735.00 13,37,790.00

rear side of the pad. Lumber pad has an adjustment of 8.0± 0.5 cm in height. The pneumatic height adjustment has an

adjustment stroke of 10cm. The pedestal is injection moulded in black 30% glass filled nylon and fitted with 5nos. twin wheel

castors. The pedestal pitch diameter is 66cm. The work shall be carried out as per guidance and instructions recieved from

Engineer Incharge. The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified. & product must be

greenguard certified by UL.

Supplying and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be 2060W x 905D x 855H. The seat

should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ±

2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with

Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or

leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and

22 Soft Seating termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 108 Each 40,183.00 43,39,764.00

3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made

in Stainless steel (grade SS 202) tube & plate with plastic endcap.The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO

18001:2007 certified

Digitally signed by ARTI

GUPTA 14:39:02 IST

Supplying and placing in position Main desk of the following specifications. Main Desk size shall be 1500 Width x 750 Depth x

743 Height.Top shall be of 18 mm thickness made of PLT board with 2 mm Edge banding. Wenge and savannah Maple PLT board

shall be used. The Understructure shall be in pre-laminated panels made with PLT boards . 2- Drawerand 3 - Drawer storage

PA/ Faculty units with different combinations to support tops made with 18 mm PLT boards of different colours.Modesty and back panels

Room made with 18 mm PLT boards. The pedestals / storages shall be fitted with necessary locks. The OEM should be ISO

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon &

upholstered using Micro mesh fabric with high tenacity yarn with 28 density foam sandwich in lumbar area. Seat Size:- 47cm(w)

× 51.5cm (D). Back size- 45cm x 65.3cm. The HR polyurathene foam is moulded with density =45+/-2 kg/m cube and hardness

16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down adjustment of 8.0 ± 0.5cm which is provided in

armrest structure. Fixed armrest top is PU moulded over metal insert. It shall have Front pivot synchro mechanism with

following features. 360 degree revolving type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking with

anti- shock feature, seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with mouled polyurathene

foam & covered with polyester fabric. The height of lumber pad can be adjusted through two projecting knobs provided on the

24 Main Chair rear side of the pad. Lumber pad has an adjustment of 8.0± 0.5 cm in height. The pneumatic height adjustment has an 36 Each 12,668.00 4,56,048.00

adjustment stroke of 10cm. The pedestal is injection moulded in black 30% glass filled nylon and fitted with 5nos. twin wheel

castors. The pedestal pitch diameter is 66cm. This shall come along a headrest assembly consisting of polypropylene pad with

lumbr support and covered with polyester fabric. Neckrest assembly has an adjustment stroke of 4.2cm and otation adjustment

stroke of 76 degrees. The work shall be carried out as per guidance and instructions recieved from Engineer Incharge. The OEM

should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified.

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon &

upholstered using Micro mesh fabric with high tenacity yarn with 28 density foam sandwich in lumbar area. Seat Size:- 47cm(w)

× 51.5cm (D). Back size- 45cm x 65.3cm. The HR polyurathene foam is moulded with density =45+/-2 kg/m cube and hardness

16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down adjustment of 8.0 ± 0.5cm which is provided in

armrest structure. Fixed armrest top is PU moulded over metal insert. It shall have Front pivot synchro mechanism with

following features. 360 degree revolving type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking with

anti- shock feature, seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with mouled polyurathene

25 Visitor Chair foam & covered with polyester fabric. The height of lumber pad can be adjusted through two projecting knobs provided on the 36 Each 11,735.00 4,22,460.00

rear side of the pad. Lumber pad has an adjustment of 8.0± 0.5 cm in height. The pneumatic height adjustment has an

adjustment stroke of 10cm. The pedestal is injection moulded in black 30% glass filled nylon and fitted with 5nos. twin wheel

castors. The pedestal pitch diameter is 66cm. The work shall be carried out as per guidance and instructions recieved from

Engineer Incharge. The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified.

The Back Unit shall be of dimensions 1800 x 500 x 750mm. It shall be made of 25mm thick MDF – one side pre-laminate board

confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. The Slide door unit is made of 25 mm thick Pre-

laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Shutters have a

26 Back Unit soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for security.The 18 Each 44,661.00 8,03,898.00

prodcut should be GREENHGUARD ,AIOTA & GRIHA certified.The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO

18001:2007 certified.

Digitally signed by ARTI

GUPTA 14:39:02 IST

Providing and placing panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200

including powder coated aluminium trims. Tiles: Combination of top tiles are fabric magnetic/fabric/fabric tackable/white

board/glass writing board/ clear glass tile/ plain metal/ prelam tile. Bottom tiles - Plain metal/ fabric magnetic / fabric /

laminated /prelam. The panel thickness comprises of 38mm (35 mm Minimum) thick paper honeycomb + 3mm MDF on each

sides + 0.6mm decorative laminate or fabric on both sides. The uprights and horizontals shall be made of aluminium extrusion

having average wall thickness of 1.2 mm & powder coated with epoxy- polyester powder. Particle board framing is used on

outer boundary of these blocks as well as intermediately at certain locations forming conduit for passing cables. These

blocks are located in the mid segment of the panels and can be provided with cutouts for mounting switch boxes (above or

below the worktops). Top tiles can be offered in variety of combinations. The fins along the depth shall be 22.8mm thick.

Worksurface- out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1500mm W1 x 1500mm W2 x

750D x 750H. Brackets shall be made from 2mm thick CRCA steel. Pedestals with legs - Nova pedestal flat metal front, free

standing central locking of size 390 mm w x 435 mm d x 646 mm height 3dr = 2box+1file. The work shall be carried out as per

the instructions and guidance received from engineer incharge.The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO

18001:2007 certified. & product must be greenguard certified by UL.

The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and

upholstered with high stretch knitted polyester fabric. The back size shall be 45.5cm W x 53.0cm H. The HR polyurethane foam

used in seat and back cushion is moulded in density 45kg per m3. The seat and back are firmly connected to the base frame and

are cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or

back, without need for complex manual adjusments. The cantilevered seat offers impact cushioning while seating and

synchronises with the back movement during posture changes. The ‘S: shaped spines moulded in high strength glass filled

Polyamide and the spine connector moulded in glass filled Polyamide form the back spine structure involved in multi

28 dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt limiter feature which is 154 Each 11,441.00 17,61,914.00

inbuilt in saet base and the tension is user weight dependent. The adjustable armrests assembly consists of armrest housing

sliding over the armrest structure, both moulded in glass filled Polyamide. The pneumatic height adjustment shall have a stroke

of 9.2cm.The pedestal is injection moulded in glass filled Polyamide and fitted with 5 nos. twin wheel castors. The pedestal is

66cm pitch centre diameter and 76cm with castors. The overall dimensions of the chair shall be 76cmx 76cm x(99.5-108.8cm).

The seat height shall be (44.5-53.8cm).D33

The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and

upholstered with high stretch knitted polyester fabric. The back size shall be 45.5cm W x 53.0cm H. The HR polyurethane foam

used in seat and back cushion is moulded in density 45kg per m3. The seat and back are firmly connected to the base frame and

are cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or

back, without need for complex manual adjusments. The cantilevered seat offers impact cushioning while seating and

synchronises with the back movement during posture changes. The ‘S: shaped spines moulded in high strength glass filled

Polyamide and the spine connector moulded in glass filled Polyamide form the back spine structure involved in multi

dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt limiter feature which is

inbuilt in saet base and the tension is user weight dependent. The adjustable armrests assembly consists of armrest housing

sliding over the armrest structure, both moulded in glass filled Polyamide. The pneumatic height adjustment shall have a stroke

of 9.2cm.The pedestal is injection moulded in glass filled Polyamide and fitted with 5 nos. twin wheel castors. The pedestal is

66cm pitch centre diameter and 76cm with castors. The overall dimensions of the chair shall be 76cmx 76cm x(99.5-108.8cm).

The seat height shall be (44.5-53.8cm).The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified. &

product must be greenguard certified by UL.

Providing in place of main table with overall size of table equal to 1350 x 600 x750mm. The table is made of 25 mm thick MDF –

one side pre-laminate board with 0.4 mm PVC membrane pressed on to top. Grommet provided on work surface for wire

manaement. The modesty panel is made of 25 mm thick MDF – one side pre-laminate board with 0.4 mm PVC membrane

pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade

30 Classrooms Main Table edge banded with matching 2 mm thick PVC lipping. The HInge door unit is made of 25 mm thick Pre-laminated twin board of E1- 27 Each 21,824.00 5,89,248.00

P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Handles are provided for ease of opening.

Pedestals are provided with lock for security.The prodcut should be GREENHGUARD ,AIOTA & GRIHA certified.The OEM should

be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified.

Digitally signed by ARTI

GUPTA 14:39:02 IST

The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and

upholstered with high stretch knitted polyester fabric. The back size shall be 45.5cm W x 53.0cm H. The HR polyurethane foam

used in seat and back cushion is moulded in density 45kg per m3. The seat and back are firmly connected to the base frame and

are cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or

back, without need for complex manual adjusments. The cantilevered seat offers impact cushioning while seating and

synchronises with the back movement during posture changes. The ‘S: shaped spines moulded in high strength glass filled

Polyamide and the spine connector moulded in glass filled Polyamide form the back spine structure involved in multi

dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt limiter feature which is

inbuilt in saet base and the tension is user weight dependent. The adjustable armrests assembly consists of armrest housing

sliding over the armrest structure, both moulded in glass filled Polyamide. The pneumatic height adjustment shall have a stroke

of 9.2cm.The pedestal is injection moulded in glass filled Polyamide and fitted with 5 nos. twin wheel castors. The pedestal is

66cm pitch centre diameter and 76cm with castors. The overall dimensions of the chair shall be 76cmx 76cm x(99.5-108.8cm).

The seat height shall be (44.5-53.8cm).The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified. &

product must be greenguard certified by UL.

The seat sub-assembly shall be made up of 1.2+/-0.1cm thk plywood upholstered with moulded foam and polyster fabric and

shall be covered with an injection moulded polypropylene outer cover. The seat should tip-up when not in use and this feature

should be used while stacking the chairs horizontally. The back sub-assembly shall be made up of injeection -moulded

polypropylene inner upholstered with moulded foam and polyster fabric and shall be covered with an injection moulded

polypropylene outer cover. The countoured back with width extension at the bottom area shall be designed to give comfort to

lower back. The back flexing feature shall allows the back to tilt by 9+/-2 degree to aid the user in adopting a comfortable

reclining posture. The dimensions of back shall be 45.2cm(W) X 44.6cm(H). and of seat shall be 47.0cm (W) X 50.0cm(D). The

powder coated 4 leg structure shall be made of 2.2+/-0.03cm dia X 0.25+/-0.02cm thk M.S.E.R.W. tube front and rear leg shall

be welded along with connecting tube made of 1.9+/-0.02cm dia X 0.2+/-0.016cm thk M.S.E.R.W tube to form the tubular frame

assembly. The legs shall be provided with injection moulded adopter bush in black nylon and brake-loaded castors enabling easy

maneuvering while not in use and stable siting while in use. The armrests structure shall be made up of 2.2+/-0.03 cm dia X

32 0.25+/-0.02cm thk M.S.E.R.W. tube welded to the tubular frame structure and having a scratch-resistant ABS arm top. The chairs 942 Each 10,917.00 102,83,814.00

should be stacked horizontally when not in use. The full desklet assembly shall be flip-up type and shall be made up of extension

tube of 1.9+/-0.02cm dia X 0.2+/-0.016cm thk M.S.E.R.W. tube and a support tube on L.H. side of 1.6+/-0.02cm dia X 0.2+/-

0.016cm thk M.S.E.R.W. tube on which an scratch resistant ABS desklet top shall be fixed and covered on bottom side with a

bottom cover. The polyurethane foam shall be moulded with density= 70.0+/-8.0kg/m3 and hardness=20+/-2 for seat and 16+/-

2 for back at 25% compression. The Twin wheel castors shall be injection moulded in black. Overall Dimensions of Chair shall be

Seat Height - 47.5 cm, Height - 89.0cm, Width & Depth of Chair as measured from pedestal - Width-71.0cm and Depth-82.0

cm.The product should be GREENGUARD GOLD, AIOTA,GRIHA, GREENPRO, SCS IAQ certified.The OEM should be ISO

The overall size of the wortop shall be 4200mm x 1500mm x 740mm. Worktop shall be made from 25mm thick MDF one side

prelaminate board with 0.4mm PVC membrane pressed on to top and having chamfered edge. Soft closing dual access flap

provided for access to power supply and data cables. The Under-structure consists of mixture of 25mm and 18mm Pre-

laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick

PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics.The product

33 Meeting Room has a knock-down construction. A wire raiser made of 0.8mm CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60 1 Each 1,10,668.00 1,10,668.00

microns) for flow of wires and cables. A Power box with 2 cutouts on either sides for standard 8 module Anchor Roma is

provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables(eg. HDMI,VGA-

A,etc).The product should be GREENGUARD & AIOTA certified.The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO

18001:2007 certified.

Digitally signed by ARTI

GUPTA 14:39:02 IST

Supplying & placing of High back chair with following specifications :SEAT ASSEMBLY : The Cushioned seat should be made of Injection

molded Plastic outer & inner. Plastic

Inner should be made up of upholstered with leatherette and moulded High Resilience (HR) Polyurethane

foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.

*Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) BACK ASSEMBLY: The Cushioned back should be made of PU Foam with insitumolded MS E.R.W

Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. HIGH BACK SIZE: 47.7 cm. (W) x 76.4 cm : The armrest

top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03

cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-

SYNCHRO MECHANISM : The adjustable tilting mechanism should be designed with the following features: • 360' revolving type. • Front-

pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated

34 Main Chair in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism 1 Each 20,820.00 20,820.00

housing should be made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT : Seat depth adjustment should be

integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT:

Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the

comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic ht adjustment has an adjustment stroke

of 10.0±0.3 cm. PEDESTAL ASSEMBLY: The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel

castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) TWIN WHEEL CASTORS: The twin wheel castors

should be injection moulded in black PP having 6.0± 0.1cm wheel Diameter.The product must be UL Greenguard certified. The OEM should

be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified.

Supplying & placing of mid back chair with following specificationsSEAT ASSEMBLY : The Cushioned seat should be made of Injection

molded Plastic outer & inner. Plastic

Inner should be made up of upholstered with leatherette and moulded High Resilience (HR) Polyurethane

foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.

*Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) BACK ASSEMBLY: The Cushioned back should be made of PU Foam with insitumolded MS E.R.W

Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. HIGH BACK SIZE: 47.7 cm. (W) x 76.4 cm : The armrest

top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03

cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-

SYNCHRO MECHANISM : The adjustable tilting mechanism should be designed with the following features: • 360' revolving type. • Front-

pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated

35 in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism 13 Each 19,431.00 2,52,603.00

Chair housing should be made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT : Seat depth adjustment should be

integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT:

Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the

comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic ht adjustment has an adjustment stroke

of 10.0±0.3 cm. PEDESTAL ASSEMBLY: The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel

castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) TWIN WHEEL CASTORS: The twin wheel castors

should be injection moulded in black PP having 6.0± 0.1cm wheel Diameter.The product must be UL Greenguard certified. The OEM should

be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified.

Supplying and placing in position auditorium chair of the follwing specifications. Supplying and placing in position auditorium

chair of the follwing specifications. The seat shall be made of Polyurethane Foam moulded with 1.5 ±0.1cm. thk. plywood insert

measured as per QA methoti described in OCP-QLTA-P14-18 and shall be upholstered with fabric. Approx. Seat Size shall be:

Depth: 42.0cm. Width @ rear: 44.0cm. Width @ front: 41.0cm. The back assembly shall be flexing type and made of

Polyurethane Foam moulded with MS. tubular frame insert and shall be upholstered with fabric and back cover. The insert shall

be made of 01.9 ±0.02cm x 0.16 ±0.0.128cm. thk.MS tubular frame with flexible nylon straps running across the length and

width of the frame. Approx. Back Size shall be: Height: 75:0cm, Width @ top: 34.5cm, Width @ seat level: 46.0cm. The HR

polyurethane foam is moulded with density = 45 +/-2 kg/m3. The-back cover and mechanism cover shall be vacuum formed

from black ABS sheets. The Armrest understructure shall be upholstered PU foam moulded with MS insert. Arm tops shall be

Auditorium made of black Integral Skin polyurethane with 50-70 Shore 'A' Hardness & reinforced with wooden insert. Armrest width= 7.0

36 jupiter ±0.5cm and shall be offered as common/individual armrest between chairs. 250 Each 11,515.00 28,78,750.00

• MS black powder coated (DFT 40-60 microns ) understructure with integrated, auto tip-up mechanism which folds the seat

when not is use.

• Footprint area of base plate: made of HR steel 15.0 ± 0.2cm X 22.0 ± 0.2cm X 0.5 ± 0.05 cm thick.

• Backrest supporting beam width: 46.0 ±0.2cm.(L) x 8.0 ±0.03cm. x 4.0 ±0.03cm. x 0.2 ±00.16cm MS tube.

• Understructure shall be fixed to ground by anchors with washer and nut. The auditorium chair shall be designed to get

mounted/grouted on floors. Overall Dimensions of Chair shall be Seat Height - 46.5 cm, Height - 101.0 cm, Width & Depth of

Chair Width(w1)-60.0cm(individual), width(W) - 53.0 cm.(common arm) and Depth-64.0 cm.(normal) , Depth(D2)- 49.0(seat

folded).The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 D32

Digitally signed by ARTI

GUPTA 14:39:02 IST

The system shall be a desk-based system with a platform understructure made up of a combination of MS. Tubes and plates.

The terminating leg structure shall be in M.S. CRCA sheet/ tubes/rods finished with epoxy power coating of the approved colour

as per the project designer. The terminating legs can be provided with modesty panels optionally. These modesty panel shall be

of Metal 1.2 mm thick CRCA. The legs shall be provided with translucent glide screws to take care of the levelling as per the site

requirements. Worktop shall be made of 25MM thick Pre-Laminated Board. All the edges of work surface shall be provided with

machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. The worktop shall be complete with provisions for screen

mounting as well as for wire management on the workstation. Provisions for fixing of the switches shall be on the wire

tray/channel. Wire riser leg or independent wire risers shall be provided as per the layout structure. Screen shall be provided as

Workstation per the requirement of the design and layout. The screen finishes can be selected from Fabric, laminated coloured glass, and DL

1050mm marker board. Fabric screens shall be of 19 mm overall thick, Glass screens are of 8 MM thick. The screens provided shall be

complete with its set of PDC clamps for fixing on the worktop. The screens shall be placed along the width of the worktop. The

overall size of the worktop shall be 1050mm x 600mmD. The overall size of the workstation shall be 1050W x 600D x

1200mmH.The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified. & product must be greenguard

certified by UL., and BIFMA Level 2 , Green Pro, Griha ,IAQ Gold Certified .

The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and

upholstered with high stretch knitted polyester fabric. The back size shall be 45.5cm W x 53.0cm H. The HR polyurethane foam

used in seat and back cushion is moulded in density 45kg per m3. The seat and back are firmly connected to the base frame and

are cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or

back, without need for complex manual adjusments. The cantilevered seat offers impact cushioning while seating and

synchronises with the back movement during posture changes. The ‘S: shaped spines moulded in high strength glass filled

Polyamide and the spine connector moulded in glass filled Polyamide form the back spine structure involved in multi

dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt limiter feature which is

38 inbuilt in saet base and the tension is user weight dependent. The adjustable armrests assembly consists of armrest housing 40 Each 11,441.00 4,57,640.00

sliding over the armrest structure, both moulded in glass filled Polyamide. The pneumatic height adjustment shall have a stroke

of 9.2cm.The pedestal is injection moulded in glass filled Polyamide and fitted with 5 nos. twin wheel castors. The pedestal is

66cm pitch centre diameter and 76cm with castors. The overall dimensions of the chair shall be 76cmx 76cm x(99.5-108.8cm).

The seat height shall be (44.5-53.8cm).The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified. &

product must be greenguard certified by UL.

Providing in place of main table with overall size of table equal to 1350 x 600 x750mm. The table is made of 25 mm thick MDF –

one side pre-laminate board with 0.4 mm PVC membrane pressed on to top. Grommet provided on work surface for wire

manaement. The modesty panel is made of 25 mm thick MDF – one side pre-laminate board with 0.4 mm PVC membrane

pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade

Librarian edge banded with matching 2 mm thick PVC lipping. The HInge door unit is made of 25 mm thick Pre-laminated twin board of E1-

Table P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Handles are provided for ease of opening.

Pedestals are provided with lock for security.The prodcut should be GREENHGUARD ,AIOTA & GRIHA certified.The OEM should

be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified.

Digitally signed by ARTI

GUPTA 14:39:02 IST

The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and

upholstered with high stretch knitted polyester fabric. The back size shall be 45.5cm W x 53.0cm H. The HR polyurethane foam

used in seat and back cushion is moulded in density 45kg per m3. The seat and back are firmly connected to the base frame and

are cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or

back, without need for complex manual adjusments. The cantilevered seat offers impact cushioning while seating and

synchronises with the back movement during posture changes. The ‘S: shaped spines moulded in high strength glass filled

Polyamide and the spine connector moulded in glass filled Polyamide form the back spine structure involved in multi

dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt limiter feature which is

40 Main Chair inbuilt in saet base and the tension is user weight dependent. The adjustable armrests assembly consists of armrest housing 2 Each 11,441.00 22,882.00

sliding over the armrest structure, both moulded in glass filled Polyamide. The pneumatic height adjustment shall have a stroke

of 9.2cm.The pedestal is injection moulded in glass filled Polyamide and fitted with 5 nos. twin wheel castors. The pedestal is

66cm pitch centre diameter and 76cm with castors. The overall dimensions of the chair shall be 76cmx 76cm x(99.5-108.8cm).

The seat height shall be (44.5-53.8cm).The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified. &

product must be greenguard certified by UL.

Overall Dimensions of Double Sided Wood & Steel Book Rack shall be 925mm(W)x590mm(D)x1890mm(H). Rigid Knockdown

construction . Back panel up to the bottom of third rack for additional rigidity . Racks, Back panel & Skirting : CRCA 0.8 mm

thickness . Side panels : 25 mm thick pre laminated particle board (PLB) with laminate on both sides . Stackability shall have add-

on units width wise to form a bank of racks having common side panel . Bottom plus four fixed racks plus 10 storage levels. Each

rack is provided with stiffener at bottom for strength . Uniformly distributed load capacity per each full shelf is 80 Kg maximum .

41 Rack back stiffener shall be there at the rear side of the racks back stiffener s are provided . These are to support books on the 62 Each 43,026.00 26,67,612.00

rear side . Label Holder on each main unit to insert labels for identification . Finish shall be Epoxy polyester powder coated to

the thickness of 50 microns .The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified. & product must be

greenguard certified by UL.

4 Door Book Case shall have the configuration of 914mm(W)x320mm(D)x1742mm(H). The unique design provides the right

rigidity to the Top hinged doors , which shall facilitate easy use. The Book Case shall be made from prime quality CRCA steel with

anti rusting treatment. It shall have a Rigid Knock Down Construction. The Top Pannel, Back Pannel and Side Pannel are made

from 0.7mm high yield CRCA and other components from 0.8mm CRCA. Each door shall have a 6 Lever Cam Lock with Common

Key. 3mm thick glass should be used in each door for clear inside vision whih shall be secured in a metal frame through a rubber

gasket. Scissor Mechanism should be provided in each door for receding inside the top of every compartment and it shall ensure

42 Bookcase parallel and smooth movement. Each door should be provided with plastic side end caps as handle which is easy to grip. Each 36 Each 29,929.00 10,77,444.00

compartment shall have a storage shelf with a UDL capacity of max 80 Kg. The 2 Door Book Case shall have 18mm PLB Top

straight edge with PVC lipping. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10).The OEM

should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified. & product must be greenguard certified by UL.

Providing and Placing in place of conference table of follwoing specifications. The overall dimensions of the table shall be 1200 x

900 x 750mm. These terminating leg structure shall be in M.S. CRCA sheet/ tubes/rods as per IS. 513/7138/432 finished with

epoxy power coating of the approved colour as per the project designer. Worktop shall be made of 25MM thick Pre-Laminated

Board conforming to IS: 12823. All the edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping

glued with hot melt EVA glue. Cross members in the Upbeat system are made from 50 mm x 25 mm x 1.2 mm thick. Cross

Library Table members are assembled by friction fit PDC joinery and Grub screws. All cross members are mounted at a distance of 165 mm

1200 x 900 from worktop sides. Wire management: Wire tray with integrated power box made with a combination of 0.6 mm thick CRCA

outer body and 0.8 mm thick CRCA switch plate (8+3 Anchor Roma) module cut out as standard. They are mounted on

worktop.The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified. & product must be greenguard

certified by UL.

Digitally signed by ARTI

GUPTA 14:39:02 IST

The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and

upholstered with high stretch knitted polyester fabric. The back size shall be 45.5cm W x 53.0cm H. The HR polyurethane foam

used in seat and back cushion is moulded in density 45kg per m3. The seat and back are firmly connected to the base frame and

are cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or

back, without need for complex manual adjusments. The cantilevered seat offers impact cushioning while seating and

synchronises with the back movement during posture changes. The ‘S: shaped spines moulded in high strength glass filled

Polyamide and the spine connector moulded in glass filled Polyamide form the back spine structure involved in multi

dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt limiter feature which is

44 Library Chair inbuilt in saet base and the tension is user weight dependent. The adjustable armrests assembly consists of armrest housing 144 Each 11,441.00 16,47,504.00

sliding over the armrest structure, both moulded in glass filled Polyamide. The pneumatic height adjustment shall have a stroke

of 9.2cm.The pedestal is injection moulded in glass filled Polyamide and fitted with 5 nos. twin wheel castors. The pedestal is

66cm pitch centre diameter and 76cm with castors. The overall dimensions of the chair shall be 76cmx 76cm x(99.5-108.8cm).

The seat height shall be (44.5-53.8cm).The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified. &

product must be greenguard certified by UL.

Supplying and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be 2060W x 905D x 855H. The seat

should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ±

2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with

Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or

leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and

45 Sofa 3 seater termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3 Each 40,183.00 1,20,549.00

3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made

in Stainless steel (grade SS 202) tube & plate with plastic endcap.The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with

understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of

table shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.The OEM should be ISO 9001:2015,ISO 14001:2015 &

46 Center Table 1 Each 12,760.00 12,760.00

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with

understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of

table shall be Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 cm.The OEM should be ISO 9001:2015,ISO 14001:2015 &

900 mm (W) x 450 mm (D) x 1830 mm (H) 2. Construction & Material Rigid Knock down construction. Panels made from CRCA*

0.6 mm thk (± 0.07mm ) and front frame made from CRCA* 0.8mm thk (± 0.8 mm). *CRCA ‘D’ Grade as per IS 513 3.

Configuration (Racks) 5 Level Racks 4. Display Tray Suitable for Fullscape size magazines, periodicals. Aesthetically appealing

Metal tray at an anglefor easy viewing Receding facility to access the storage behind. Sliding on plastic rollers. 5. Behind Storage

48 Library Leveler Screw type leveler with hex plastic base (add inunit height min.8 mm & additional 5 mm max for adjustment) 7. Finish 6 Each 22,610.00 1,35,660.00

Epoxy Polyester Powder coated to the thicknessof 50 microns (+/-10).

Digitally signed by ARTI

GUPTA 14:39:02 IST

Overall dimension is 665 mm (L) x 485 mm (w) x 393 mm (H). Under structure frame is made of 19 mm x 19 mm and 1.2 mm

thick vertical tubes. The stool top is made of 1.2 mm thick . The step top have 3.2 mm thick rubber sheet to have better grip.

load bearing capacity is 135 kg. all the metal parts are pre treated and powder coated with epoxy polyester powder coating.

49 Library Footstep 10 Each 9,495.00 94,950.00

Overall Dimension: Overall Sizes Diagonal Leg Dia 538 mm H470 min-655max. Top plate made of SS 304 made sheet with spin

section of thickness 1mm & non corrosive. It has a diameter of 305mm, seat base made of MS ring and rectangular tube. EN8

Screw having dia of 22 mm is used for height adjustment of the seat base. The round hub made of MS ERW tube having dia of

HEIGHT 38mm and thickness 2 mm. The Hub is welded with the legs and it accommodate and cover the lead screw mechanism. The

ADJUSTABLE under-structure consist of 4 legs made up of MS ERW tube of diameter 25.4 mm and 1.6mm thick. The press formed pipe leg

50 Laboratory SS TOP give a round & clean look. All the legs is Provided with 4 nos of Nylon-6 bush. All metal components are pre treated with zinc 750 Each 5,816.00 43,62,000.00

ROUND phosphating in 7 tank process and then powder coated with epoxy polyester powder coating . Safe working load is 135kg

Product Size: Plain : 916 mm (W) x 486 mm (D) x 1981* mm (H)Construction & Material • Rigid Knock down construction.•

Prime Quality CRCA** Steel - Panels from 0.6 mm thick (±0.07mm) & Front frame, Shelf 0.8 mm thick (±0.08mm)Configuration

(Door) • Full height Steel Hinged DoorLocking & handle : • Plastic Recessed Handle cum Cam Lock• 3 way locking mechanism

with shooting bolt arrangementShelving : • Height wise Adjustable Shelf Mounting• Uniformly Distributed Load Capacity per

each full/half shelf is 40 Kg maximum. 4 Nos. of Adjustable Full ShelvesLeveler Screw type leveler with Hex. Plastic base (add in

51 Storewel Plain unit height min-8mm & additional5mm max. for adjustment.8 Hanging rod For Partition only- 1no. of half length hanging rod on 160 Each 24,549.00 39,27,840.00

furniture right half of partion below top shelf9 Top - Metal Top only.Finish • Epoxy Powder coated to the thickness of 50 microns (+/-10)

SS 304 sheet is Provisionided at top for the placement of the instruments being used & also for easy in portability. SS 304 sheet

is Provisionided at the top as well as bottom shelf for keeping the instrument being used. Horizontal bars are welded with legs

so as to Provisionide protection at sides with supporting legs giving a sturdy look. Castors of 125mm Dia. are used for easy in

movement. Overall Dimension: 775mm X 531mm X 915mm H. Maximum safe working load is 40kg.

52 Library Trolley 2 Each 29,119.00 58,238.00

Grand Total 797,07,379.86

Grand Total 797,07,379.86

Digitally signed by ARTI

GUPTA 14:39:02 IST

Name of Work : “Supply and Fixing of Furniture at Academic building, UG hostels and staff Quarters at College of

Veterinary and Animal Sciences and college of Fisheries for RLBCAU at Datia, MP.”

BILL OF QUANTITIES OF LAB. FURNITURE

Sr. No. Item Qty Unit Amount

R.H. 900 Ht.C-Frame Assy. For Table Depths 770 Wall Side Without

Upright , 1540 Island Without Upright & 920 Wall Side With

Upright,Welded cabinet should be type tested for SEFA 8M standard

by a SEFA approved LAB , welded cabinet should also be type tested

for DIN EN 14727 by a third party LAB, Adapatble work benches /C

Frame should be type tested for SEFA 10 by a SEFA approved LAB .

R.H. 900 Ht.C-Frame Assy. For Table Depths 620 Wall Side, 1240

Island Without Upright & 770 Wallside With Upright

3 R.H. 900 Ht.C-Frame Assy. For Table Depth 1540 Island With Upright 3 Nos. 3,801 11,402

L.H. 900 Ht.C-Frame Assy. For Table Depths 770 Wall Side Without

Upright , 1540 Island Without Upright & 920 Wall Side With Upright

Common 900 Ht.C-Frame Assy. For Table Depths 770 Wall Side

5 Without Upright , 1540 Island Without Upright & 920 Wall Side With 230 Nos. 4,069 9,35,787

Common 900 Ht.C-Frame Assy. For Table Depths 620 Wall Side, 1240

Island Without Upright & 770 Wallside With Upright

7 900 Ht. Corner C-Frame Table 28 Nos. 10,216 2,86,060

8 900 Module Length Horizontal Members 4 Nos. 12,003 48,012

Digitally signed by ARTI

GUPTA 14:39:02 IST

9 750 Module Length Horizontal Members 10 Nos. 10,104 1,01,043

10 600 Module Length Horizontal Members 27 Nos. 8,214 2,21,777

11 1500 Module Length Horizontal Members 143 Nos. 18,939 27,08,277

12 1350 Module Length Horizontal Members 27 Nos. 17,669 4,77,072

13 1200 Module Length Horizontal Members 36 Nos. 15,805 5,68,977

14 1050 Module Length Horizontal Members 1 Nos. 13,955 13,955

15 770 Depth Wall Side Without Upright End Cover Panel 81 Nos. 1,107 89,654

16 1540 Depth Island With Upright & Without Upright End Cover Panel 4 Nos. 1,930 7,722

17 Island Without Upright C-Frame Joining Bracket 10 Nos. 78 779

Fixed Type Reagent Shelf (Main Type) 900 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Main Type) 750 L- Cutout : 3 Module + 3

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Main Type) 600 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Main Type) 1500 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Main Type) 1350 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Main Type) 1200 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Main Type) 1050 L- Cutout : 6 Module + 6

Module (Total 2 Cutours Only)

Fixed Type Reagent Shelf (Add On Type) 900 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 750 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 600 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 1650 L- Cutout : 6 Module +

6 Module (Total 2 Cutouts Only)

Digitally signed by ARTI

GUPTA 14:39:02 IST

Fixed Type Reagent Shelf (Add On Type) 1500 L- Cutout : 6 Module +

6 Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 1350 L- Cutout : 6 Module +

6 Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 1200 L- Cutout : 6 Module +

6 Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 1050 L- Cutout : 6 Module +

6 Module (Total 2 Cutouts Only)

41 Pp Drop-In Sink Model S 06 560 Mm (W) X 355 Mm (D) 28 Nos. 3,210 89,869

3 Way Faucet Bench Mounted 3 Way Water Fittings 8" Swing

Gooseneck Model No. : 259924110 01 - 08

43 Jet Black Granite (Sq.Mt.) 20 (±2) Mm Thk 289 Sq.Mtrs. 7,376 21,31,716

44 Silicon Sealant - Black 10 Nos. 435 4,354

45 Masking Tape 10 R.Mtrs. 169 1,687

46 Neoprene Strip (Running Meter) (30Mm Wide & 6 Mm Thick) 1160 R.Mtrs. 84 97,185

47 Sr-998 Glue For Neoprene Mat. (Litres) 29 R.Mtrs. 1,121 32,509

48 Flexible/F Serated Connector Model : Hp 01 Make: Premier 28 Nos. 615 17,214

49 Anti-Siphon Bottle Trap Model : S 04 Make: Premier 28 Nos. 595 16,652

50 6/16A, 6 Pin Shutter Socket - Model No: M1332 1776 Nos. 395 7,02,053

51 6 Module Plate - Model No: Cs956M-S 888 Nos. 296 2,63,008

52 16A, 1 Way Switch Model No: M0130 1776 Nos. 256 4,54,763

Digitally signed by ARTI

GUPTA 14:39:02 IST

R.H. 900 Ht.C-Frame Assy. For Table Depths 770 Wall Side Without

Upright , 1540 Island Without Upright & 920 Wall Side With

Upright,Welded cabinet should be type tested for SEFA 8M standard

by a SEFA approved LAB , welded cabinet should also be type tested

for DIN EN 14727 by a third party LAB, Adapatble work benches /C

Frame should be type tested for SEFA 10 by a SEFA approved LAB .

R.H. 900 Ht.C-Frame Assy. For Table Depths 620 Wall Side, 1240

Island Without Upright & 770 Wallside With Upright

L.H. 900 Ht.C-Frame Assy. For Table Depths 770 Wall Side Without

Upright , 1540 Island Without Upright & 920 Wall Side With Upright

Common 900 Ht.C-Frame Assy. For Table Depths 770 Wall Side

4 Without Upright , 1540 Island Without Upright & 920 Wall Side With 98 Nos. 4,069 3,98,727

Common 900 Ht.C-Frame Assy. For Table Depths 620 Wall Side, 1240

Island Without Upright & 770 Wallside With Upright

6 900 Ht. Corner C-Frame Table 16 Nos. 10,216 1,63,463

7 900 Module Length Horizontal Members 3 Nos. 12,003 36,009

8 750 Module Length Horizontal Members 4 Nos. 10,104 40,417

9 600 Module Length Horizontal Members 15 Nos. 8,214 1,23,210

10 1500 Module Length Horizontal Members 54 Nos. 18,939 10,22,706

11 1350 Module Length Horizontal Members 17 Nos. 17,669 3,00,378

12 1200 Module Length Horizontal Members 15 Nos. 15,805 2,37,074

13 770 Depth Wall Side Without Upright End Cover Panel 49 Nos. 1,107 54,235

Fixed Type Reagent Shelf (Main Type) 900 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Main Type) 750 L- Cutout : 3 Module + 3

Module (Total 2 Cutouts Only)

Digitally signed by ARTI

GUPTA 14:39:02 IST

Fixed Type Reagent Shelf (Main Type) 600 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Main Type) 1500 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Main Type) 1350 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Main Type) 1200 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 750 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 600 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 1500 L- Cutout : 6 Module +

6 Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 1350 L- Cutout : 6 Module +

6 Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 1200 L- Cutout : 6 Module +

6 Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 1050 L- Cutout : 6 Module +

6 Module (Total 2 Cutouts Only)

31 Pp Drop-In Sink Model S 06 560 Mm (W) X 355 Mm (D) 16 Nos. 3,210 51,354

3 Way Faucet Bench Mounted 3 Way Water Fittings 8" Swing

Gooseneck Model No. : 259924110 01 - 08

33 Jet Black Granite (Sq.Mt.) 20 (±2) Mm Thk 128 Sq.Mtrs. 7,376 9,44,151

34 Silicon Sealant - Black 5 Nos. 435 2,177

35 Masking Tape 5 R.Mtrs. 169 844

Digitally signed by ARTI

GUPTA 14:39:02 IST

36 Neoprene Strip (Running Meter) (30Mm Wide & 6 Mm Thick) 520 R.Mtrs. 84 43,566

37 Sr-998 Glue For Neoprene Mat. (Litres) 13 R.Mtrs. 1,121 14,573

38 Flexible/F Serated Connector Model : Hp 01 Make: Premier 16 Nos. 615 9,836

39 Anti-Siphon Bottle Trap Model : S 04 Make: Premier 16 Nos. 595 9,516

40 6/16A, 6 Pin Shutter Socket - Model No: M1332 832 Nos. 395 3,28,890

41 6 Module Plate - Model No: Cs956M-S 416 Nos. 296 1,23,211

42 16A, 1 Way Switch Model No: M0130 832 Nos. 256 2,13,042

R.H. 900 Ht.C-Frame Assy. For Table Depths 770 Wall Side Without

Upright , 1540 Island Without Upright & 920 Wall Side With

Upright,Welded cabinet should be type tested for SEFA 8M standard

by a SEFA approved LAB , welded cabinet should also be type tested

for DIN EN 14727 by a third party LAB, Adapatble work benches /C

Frame should be type tested for SEFA 10 by a SEFA approved LAB .

R.H. 900 Ht.C-Frame Assy. For Table Depths 620 Wall Side, 1240

Island Without Upright & 770 Wallside With Upright

3 R.H. 900 Ht.C-Frame Assy. For Table Depth 1540 Island With Upright 5 Nos. 3,801 19,004

L.H. 900 Ht.C-Frame Assy. For Table Depths 770 Wall Side Without

Upright , 1540 Island Without Upright & 920 Wall Side With Upright

Common 900 Ht.C-Frame Assy. For Table Depths 770 Wall Side

5 Without Upright , 1540 Island Without Upright & 920 Wall Side With 299 Nos. 4,069 12,16,523

Common 900 Ht.C-Frame Assy. For Table Depths 620 Wall Side, 1240

Island Without Upright & 770 Wallside With Upright

7 900 Ht. Corner C-Frame Table 40 Nos. 10,216 4,08,658

8 900 Module Length Horizontal Members 7 Nos. 12,003 84,021

Digitally signed by ARTI

GUPTA 14:39:02 IST

9 750 Module Length Horizontal Members 10 Nos. 10,104 1,01,043

10 600 Module Length Horizontal Members 37 Nos. 8,214 3,03,917

11 1500 Module Length Horizontal Members 191 Nos. 18,939 36,17,349

12 1350 Module Length Horizontal Members 28 Nos. 17,669 4,94,741

13 1200 Module Length Horizontal Members 43 Nos. 15,805 6,79,612

14 1050 Module Length Horizontal Members 1 Nos. 13,955 13,955

15 770 Depth Wall Side Without Upright End Cover Panel 114 Nos. 1,107 1,26,180

Fixed Type Reagent Shelf (Main Type) 900 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Main Type) 750 L- Cutout : 3 Module + 3

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Main Type) 600 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Main Type) 1500 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Main Type) 1350 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Main Type) 1200 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Main Type) 1050 L- Cutout : 6 Module + 6

Module (Total 2 Cutours Only)

Fixed Type Reagent Shelf (Add On Type) 900 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 750 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 600 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 1650 L- Cutout : 6 Module +

6 Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 1500 L- Cutout : 6 Module +

6 Module (Total 2 Cutouts Only)

Digitally signed by ARTI

GUPTA 14:39:02 IST

Fixed Type Reagent Shelf (Add On Type) 1350 L- Cutout : 6 Module +

6 Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 1200 L- Cutout : 6 Module +

6 Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 1050 L- Cutout : 6 Module +

6 Module (Total 2 Cutouts Only)

39 Pp Drop-In Sink Model S 06 560 Mm (W) X 355 Mm (D) 44 Nos. 3,210 1,41,222

3 Way Faucet Bench Mounted 3 Way Water Fittings 8" Swing

Gooseneck Model No. : 259924110 01 - 08

41 Jet Black Granite (Sq.Mt.) 20 (±2) Mm Thk 377 Sq.Mtrs. 7,376 27,80,820

42 Silicon Sealant - Black 13 Nos. 435 5,660

43 Masking Tape 13 R.Mtrs. 169 2,194

44 Neoprene Strip (Running Meter) (30Mm Wide & 6 Mm Thick) 1510 R.Mtrs. 84 1,26,508

45 Sr-998 Glue For Neoprene Mat. (Litres) 38 R.Mtrs. 1,121 42,598

46 Flexible/F Serated Connector Model : Hp 01 Make: Premier 44 Nos. 615 27,050

47 Anti-Siphon Bottle Trap Model : S 04 Make: Premier 44 Nos. 595 26,168

48 6/16A, 6 Pin Shutter Socket - Model No: M1332 2296 Nos. 395 9,07,609

49 6 Module Plate - Model No: Cs956M-S 1148 Nos. 296 3,40,015

50 16A, 1 Way Switch Model No: M0130 2296 Nos. 256 5,87,914

Digitally signed by ARTI

GUPTA 14:39:02 IST

R.H. 900 Ht.C-Frame Assy. For Table Depths 770 Wall Side Without

Upright , 1540 Island Without Upright & 920 Wall Side With

Upright,Welded cabinet should be type tested for SEFA 8M standard

by a SEFA approved LAB , welded cabinet should also be type tested

for DIN EN 14727 by a third party LAB, Adapatble work benches /C

Frame should be type tested for SEFA 10 by a SEFA approved LAB .

R.H. 900 Ht.C-Frame Assy. For Table Depths 620 Wall Side, 1240

Island Without Upright & 770 Wallside With Upright

L.H. 900 Ht.C-Frame Assy. For Table Depths 770 Wall Side Without

Upright , 1540 Island Without Upright & 920 Wall Side With Upright

Common 900 Ht.C-Frame Assy. For Table Depths 770 Wall Side

4 Without Upright , 1540 Island Without Upright & 920 Wall Side With 98 Nos. 4,069 3,98,727

Common 900 Ht.C-Frame Assy. For Table Depths 620 Wall Side, 1240

Island Without Upright & 770 Wallside With Upright

6 900 Ht. Corner C-Frame Table 16 Nos. 10,216 1,63,463

7 900 Module Length Horizontal Members 3 Nos. 12,003 36,009

8 750 Module Length Horizontal Members 4 Nos. 10,104 40,417

9 600 Module Length Horizontal Members 15 Nos. 8,214 1,23,210

10 1500 Module Length Horizontal Members 54 Nos. 18,939 10,22,706

11 1350 Module Length Horizontal Members 17 Nos. 17,669 3,00,378

12 1200 Module Length Horizontal Members 15 Nos. 15,805 2,37,074

13 770 Depth Wall Side Without Upright End Cover Panel 49 Nos. 1,107 54,235

Fixed Type Reagent Shelf (Main Type) 900 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Main Type) 750 L- Cutout : 3 Module + 3

Module (Total 2 Cutouts Only)

Digitally signed by ARTI

GUPTA 14:39:02 IST

Fixed Type Reagent Shelf (Main Type) 600 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Main Type) 1500 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Main Type) 1350 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Main Type) 1200 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 750 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 600 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 1500 L- Cutout : 6 Module +

6 Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 1350 L- Cutout : 6 Module +

6 Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 1200 L- Cutout : 6 Module +

6 Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 1050 L- Cutout : 6 Module +

6 Module (Total 2 Cutouts Only)

31 Pp Drop-In Sink Model S 06 560 Mm (W) X 355 Mm (D) 16 Nos. 3,210 51,354

3 Way Faucet Bench Mounted 3 Way Water Fittings 8" Swing

Gooseneck Model No. : 259924110 01 - 08

33 Jet Black Granite (Sq.Mt.) 20 (±2) Mm Thk 128 Sq.Mtrs. 7,376 9,44,151

34 Silicon Sealant - Black 5 Nos. 435 2,177

35 Masking Tape 5 R.Mtrs. 169 844

Digitally signed by ARTI

GUPTA 14:39:02 IST

36 Neoprene Strip (Running Meter) (30Mm Wide & 6 Mm Thick) 510 R.Mtrs. 84 42,728

37 Sr-998 Glue For Neoprene Mat. (Litres) 13 R.Mtrs. 1,121 14,573

38 Flexible/F Serated Connector Model : Hp 01 Make: Premier 16 Nos. 615 9,836

39 Anti-Siphon Bottle Trap Model : S 04 Make: Premier 16 Nos. 595 9,516

40 6/16A, 6 Pin Shutter Socket - Model No: M1332 832 Nos. 395 3,28,890

41 6 Module Plate - Model No: Cs956M-S 416 Nos. 296 1,23,211

42 16A, 1 Way Switch Model No: M0130 832 Nos. 256 2,13,042

R.H. 900 Ht.C-Frame Assy. For Table Depths 770 Wall Side Without

Upright , 1540 Island Without Upright & 920 Wall Side With

Upright,Welded cabinet should be type tested for SEFA 8M standard

by a SEFA approved LAB , welded cabinet should also be type tested

for DIN EN 14727 by a third party LAB, Adapatble work benches /C

Frame should be type tested for SEFA 10 by a SEFA approved LAB .

R.H. 900 Ht.C-Frame Assy. For Table Depths 620 Wall Side, 1240

Island Without Upright & 770 Wallside With Upright

L.H. 900 Ht.C-Frame Assy. For Table Depths 770 Wall Side Without

Upright , 1540 Island Without Upright & 920 Wall Side With Upright

Common 900 Ht.C-Frame Assy. For Table Depths 770 Wall Side

4 Without Upright , 1540 Island Without Upright & 920 Wall Side With 76 Nos. 4,069 3,09,217

Common 900 Ht.C-Frame Assy. For Table Depths 620 Wall Side, 1240

Island Without Upright & 770 Wallside With Upright

6 900 Ht. Corner C-Frame Table 8 Nos. 10,216 81,732

7 900 Module Length Horizontal Members 1 Nos. 12,003 12,003

8 750 Module Length Horizontal Members 2 Nos. 10,104 20,209

9 600 Module Length Horizontal Members 13 Nos. 8,214 1,06,782

Digitally signed by ARTI

GUPTA 14:39:02 IST

10 1500 Module Length Horizontal Members 39 Nos. 18,939 7,38,621

11 1350 Module Length Horizontal Members 4 Nos. 17,669 70,677

12 1200 Module Length Horizontal Members 28 Nos. 15,805 4,42,538

13 1050 Module Length Horizontal Members 2 Nos. 13,955 27,909

14 770 Depth Wall Side Without Upright End Cover Panel 40 Nos. 1,107 44,274

Fixed Type Reagent Shelf (Main Type) 900 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Main Type) 750 L- Cutout : 3 Module + 3

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Main Type) 600 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Main Type) 1500 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Main Type) 1350 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Main Type) 1200 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Main Type) 1050 L- Cutout : 6 Module + 6

Module (Total 2 Cutours Only)

Fixed Type Reagent Shelf (Add On Type) 750 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Digitally signed by ARTI

GUPTA 14:39:02 IST

Fixed Type Reagent Shelf (Add On Type) 600 L- Cutout : 6 Module + 6

Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 1500 L- Cutout : 6 Module +

6 Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 1350 L- Cutout : 6 Module +

6 Module (Total 2 Cutouts Only)

Fixed Type Reagent Shelf (Add On Type) 1200 L- Cutout : 6 Module +

6 Module (Total 2 Cutouts Only)

35 Pp Drop-In Sink Model S 06 560 Mm (W) X 355 Mm (D) 14 Nos. 3,210 44,934

3 Way Faucet Bench Mounted 3 Way Water Fittings 8" Swing

Gooseneck Model No. : 259924110 01 - 08

37 Jet Black Granite (Sq.Mt.) 20 (±2) Mm Thk 98 Sq.Mtrs. 7,376 7,22,866

38 Silicon Sealant - Black 4 Nos. 435 1,742

39 Masking Tape 4 R.Mtrs. 169 675

40 Neoprene Strip (Running Meter) (30Mm Wide & 6 Mm Thick) 400 R.Mtrs. 84 33,512

41 Sr-998 Glue For Neoprene Mat. (Litres) 10 R.Mtrs. 1,121 11,210

42 Flexible/F Serated Connector Model : Hp 01 Make: Premier 14 Nos. 615 8,607

43 Anti-Siphon Bottle Trap Model : S 04 Make: Premier 14 Nos. 595 8,326

44 6/16A, 6 Pin Shutter Socket - Model No: M1332 688 Nos. 395 2,71,966

45 6 Module Plate - Model No: Cs956M-S 344 Nos. 296 1,01,886

46 16A, 1 Way Switch Model No: M0130 688 Nos. 256 1,76,169

Digitally signed by ARTI

GUPTA 14:39:02 IST

Ground Floor 208,03,202

First Floor 96,09,092

Second Floor 271,20,577

Third Floor 96,08,254

Fourth Floor 74,22,437

Total cost 745,63,562

Digitally signed by ARTI

GUPTA 14:39:02 IST

Name of the Work: “Supply and Fixing of Furniture at Academic

building, UG hostels and staff Quarters at College of Veterinary and

Animal Sciences and college of Fisheries for RLBCAU at Datia, MP.”

MODULAR KITCHEN

Sl No Name of building Amount

1 Girls hostel 739641.70

2 Boys hostel 739641.70

3 Type III quarter 3638511.12

4 Type IV quarter 3137077.20

5 Type V quarter 1149334.16

6 Type VI quarter 574667.08

Digitally signed by ARTI

GUPTA 14:39:02 IST

“Supply and Fixing of Furniture at Academic building, UG hostels and staff Quarters at College of Veterinary and Animal Sciences and college of Fisheries for RLBCAU at Datia, MP.”

BILL OF QUANTITIES OF FURNITURE FOR MODULAR KITCHEN (BOYS HOSTEL MESS)

inclusive Amount in

S.No. Descriptions Qty Unit

Providing and fixing Hinged Unit below the sink 800mm x 560mm x 710 mm in Galvanized Steel & waste bin Holder of circular shape 290

mm diameter in SS- 304 grade.The shutters and carcase is in powder coated galavanised steel.The carcase have 0.6mm body panels &

1.2mm thick horizontal frames of Galvanized sheet with zero spangles (as per ASTM A653), components shall be powder coated with high

quality powders like DuPont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H min of approved

equivalent make. The powder coat would be fringyspus in nature and impart the same in appearance. The cabinet will be supported by

1 100mm height legs of Hettich or approved make covered by PVC skirting 100 mm height of Rehau or approved make..The units will have 1 37886.26 37886

Arc Handle pitch finished of Godrej/hettich.Finished components shall be tested for the critical quality parameters, Adhesion and impact

test which enhances the life of kitchen. The total cabinet height is 810mm including cabinet height of 710mm and 100mm

legs/skirting).The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and raw plugs. Only front face area of

cabinets and skirting from floor to top of boxes shall be considered for measurement and payment. The unit will be installed as per drawing

approved by the Engineer-in-Charge.

Providing and fixing 2 Drawer Unit of size 600mm x 560mm with a set of 2 solid galvanized steel drawers (size 150mm + 150mm) with

2 required size soft-closing Tranquil range Drawer System (Approx 530mm length) as per drawing in the existing space at site and as 1 Each 27204.9 27205

direction by Engineer-in-charge.

Providing and fixing 2 Drawer Unit of size 800mm x 560mm with a set of 2 solid galvanized steel drawers (size 150mm + 150mm) with

3 required size soft-closing Tranquil range Drawer System (Approx 530mm length) as per drawing in the existing space at site and as 1 Each 26154.7 26155

direction by Engineer-in-charge.

Providing and fixing 2 Drawer Unit of size 900mm x 560mm with a set of 2 solid galvanized steel drawers (size 150mm + 150mm) with

4 required size soft-closing Tranquil range Drawer System (Approx 530mm length) as per drawing in the existing space at site and as 1 109362.4 109362

direction by Engineer-in-charge.

Digitally signed by ARTI

GUPTA 14:39:02 IST

Providing & placing plain shelf (1000mm*700mm*310mm) with openable shutters and having 0.6mm body panels & 1.2mm thick

horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653), components shall be powder coated with high quality

powders like Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H Min.

All shelves shall be supported on approved quality Selfsupporter and shall be adjustable for different heights as per requirements. Shutters to

be at least 18mm profile made out of at least 1.2mm thick in Galvanised steel. Shutters will be of steel solid facia.

Each shutter shall be fixed to the framework/carcass using two numbers of best quality CED coated hinges

5 ( Blum, Hettich approved make) i/c soft/Auto closing hinges 95 degree as per requirement(Hettich make or equivalent) fixed with SS 1 143971.8 143972

screws , nails etc complete and these shutters are provided with an approved quality of Godrej/hettich Arc 128 mm pitch Handle. Finished

components shall be tested for the critical quality parameter, Adhesion and impact test which enhances the life of kitchen. Shelves to be of

galvanised steel sheet with thickness of 1.2 mm. Steel carcase and shutters shall have passed the test like Static Load test,Shelf deflection

test. The unit shall be hanged on to the wall using metal screws of appropriate size and rawl plugs. The work shall be executed as per

drawing/Sample prepared in sample flat at site and direction of Engineer-in-charge. Only face area of openable shutter and drawer shall be

measured for payment. Cabinet with depth of 310 mm.

Providing and fixing Corner Plain Shelf of size 1000mm x 560mm x 710 mm of Galvanized Steel.The shutter and carcase is in powder

coated galavanised steel.The carcase have 0.6mm body panels & 1.2mm thick horizontal frames of Galvanized sheet with zero spangles (as

per ASTM A653), components shall be powder coated with high quality powders like DuPont, Kanasai Nerolac with dry film thickness of

40 to 60 microns with pencil hardness of 2H min of approved equivalent make. The powder coat would be fringyspus in nature and impart

the same in appearance. All shelves should be supported on approved quality SS pins and shall be adjustable for different heights as per

6 requirements.The cabinet will be supported by 100mm height legs of Hettich or approved make covered by PVC skirting 100 mm height of 1 46959.28 46959

Rehau or approved make.The units will have Arc Handle pitch finished of Godrej make or equivalent.Finished components shall be tested

for the critical quality parameters, Adhesion and impact test which enhances the life of kitchen. The total cabinet height is 810mm

including cabinet height of 710mm and 100mm legs/skirting).The unit shall be fixed to the floor/ wall/slab using metal screws of

appropriate size and raw plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be considered for measurement

and payment.The unit will be installed as per drawing approved by the Engineer-in-Charge.

Providing and fixing Gas Cylinder Unit 500mm x 560mm x 710 mm & trolly of circular shape 290 mm diameter in SS- 304 grade.The

shutters will and carcase is in powder coated galavanised steel.The carcase have 0.6mm body panels & 1.2mm thick horizontal frames of

Galvanized sheet with zero spangles (as per ASTM A653), components shall be powder coated with high quality powders like DuPont,

Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H min of approved equivalent make. The powder coat

would be fringyspus in nature and impart the same in appearance. The cabinet will be supported by 100mm height legs of Hettich or

approved make covered by PVC skirting 100 mm height of Rehau or approved make..The units will have Arc Handle pitch finished of

Godrej make or equivalent.Finished components shall be tested for the critical quality parameters, Adhesion and impact test which enhances

the life of kitchen. The total cabinet height is 810mm including cabinet height of 710mm and 100mm legs/skirting).The unit shall be fixed

to the floor/ wall/slab using metal screws of appropriate size and raw plugs. Only front face area of cabinets and skirting from floor to top of

boxes shall be considered for measurement and payment. The unit will be installed as per drawing approved by the Engineer-in-Charge.

Providing and fixing 3 Drawer Unit of size 900mm x 560mm with a set of 3 solid galvanized steel drawers (size 100mm +100mm +

8 150mm) with required size soft-closing Tranquil range Drawer System (Approx 530mm length) and 1 PVC Cutlery Tray complete as per 1 Each 29254.56 29255

drawing in the existing space at site and as direction by Engineer-in-charge.

Digitally signed by ARTI

GUPTA 14:39:02 IST

Providing and fixing GTPT kit of size 900mm x 300mm x 50mm of SS- 304 grade withdiameter of 3mm wire set of 1 PVC water collecting

9 tray with 250mm and set of 2 SS wire tray with required SS screws for fixing of component of Godrej/hettich as per drawing in the exisitng 1 Each 26640.86 26641

space at site and as direction by the Engineer-in-Charge.

Providing & placing top plain shelf (1000mm*700mm*310mm) with openable shutters and having 0.6mm body panels & 1.2mm thick

horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653), components shall be powder coated with high quality

powders like Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H Min.

All shelves shall be supported on approved quality Selfsupporter and shall be adjustable for different heights as per requirements. Shutters to

be at least 18mm profile made out of at least 1.2mm thick in Galvanised steel. Shutters will be of steel solid facia.

Each shutter shall be fixed to the framework/carcass using two numbers of best quality CED coated hinges

10 ( Blum, Hettich approved make) i/c soft/Auto closing hinges 95 degree as per requirement(Hettich make or equivalent) fixed with SS 1 146821.5 146822

screws , nails etc complete and these shutters are provided with an approved quality of Godrej Arc 128 mm pitch Handle. Finished

components shall be tested for the critical quality parameter, Adhesion and impact test which enhances the life of kitchen. Shelves to be of

galvanised steel sheet with thickness of 1.2 mm. Steel carcase and shutters shall have passed the test like Static Load test,Shelf deflection

test. The unit shall be hanged on to the wall using metal screws of appropriate size and rawl plugs. The work shall be executed as per

drawing/Sample prepared in sample flat at site and direction of Engineer-in-charge. Only face area of openable shutter and drawer shall be

measured for payment. Cabinet with depth of 310 mm.

Providing & placing top plain shelf (900mm*700mm*310mm) with openable shutters and having 0.6mm body panels & 1.2mm thick

horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653), components shall be powder coated with high quality

powders like Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H Min.

All shelves shall be supported on approved quality Selfsupporter and shall be adjustable for different heights as per requirements. Shutters to

be at least 18mm profile made out of at least 1.2mm thick in Galvanised steel. Shutters will be of steel solid facia.

Each shutter shall be fixed to the framework/carcass using two numbers of best quality CED coated hinges

11 ( Blum, Hettich approved make) i/c soft/Auto closing hinges 95 degree as per requirement(Hettich make or equivalent) fixed with SS 1 40002 40002

screws , nails etc complete and these shutters are provided with an approved quality of Godrej/hettich Arc 128 mm pitch Handle. Finished

components shall be tested for the critical quality parameter, Adhesion and impact test which enhances the life of kitchen. Shelves to be of

galvanised steel sheet with thickness of 1.2 mm. Steel carcase and shutters shall have passed the test like Static Load test,Shelf deflection

test. The unit shall be hanged on to the wall using metal screws of appropriate size and rawl plugs. The work shall be executed as per

drawing/Sample prepared in sample flat at site and direction of Engineer-in-charge. Only face area of openable shutter and drawer shall be

measured for payment. Cabinet with depth of 310 mm.

Digitally signed by ARTI

GUPTA 14:39:02 IST

Providing & placing top plain shelf (500mm*700mm*310mm) with openable shutters and having 0.6mm body panels & 1.2mm thick

horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653), components shall be powder coated with high quality

powders like Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H Min.

All shelves shall be supported on approved quality Selfsupporter and shall be adjustable for different heights as per requirements. Shutters to

be at least 18mm profile made out of at least 1.2mm thick in Galvanised steel. Shutters will be of steel solid facia.

Each shutter shall be fixed to the framework/carcass using two numbers of best quality CED coated hinges

12 ( Blum, Hettich approved make) i/c soft/Auto closing hinges 95 degree as per requirement(Hettich make or equivalent) fixed with SS 1 Each 14998.98 14999

screws , nails etc complete and these shutters are provided with an approved quality of Godrej/hettich Arc 128 mm pitch Handle. Finished

components shall be tested for the critical quality parameter, Adhesion and impact test which enhances the life of kitchen. Shelves to be of

galvanised steel sheet with thickness of 1.2 mm. Steel carcase and shutters shall have passed the test like Static Load test,Shelf deflection

test. The unit shall be hanged on to the wall using metal screws of appropriate size and rawl plugs. The work shall be executed as per

drawing/Sample prepared in sample flat at site and direction of Engineer-in-charge. Only face area of openable shutter and drawer shall be

measured for payment. Cabinet with depth of 310 mm.

Providing & placing corner top plain shelf (600mm) with openable shutters and having 0.6mm body panels & 1.2mm thick horizontal

Frames of Galvanised sheet with zero spangels(as per ASTM A653), components shall be powder coated with high quality powders like

Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H Min.

All shelves shall be supported on approved quality Selfsupporter and shall be adjustable for different heights as per requirements. Shutters to

be at least 18mm profile made out of at least 1.2mm thick in Galvanised steel. Shutters will be of steel solid facia.

Each shutter shall be fixed to the framework/carcass using two numbers of best quality CED coated hinges

13 ( Blum, Hettich approved make) i/c soft/Auto closing hinges 95 degree as per requirement(Hettich make or equivalent) fixed with SS 1 44480.1 44480

screws , nails etc complete and these shutters are provided with an approved quality of Godrej/hettich Arc 128 mm pitch Handle. Finished

components shall be tested for the critical quality parameter, Adhesion and impact test which enhances the life of kitchen. Shelves to be of

galvanised steel sheet with thickness of 1.2 mm. Steel carcase and shutters shall have passed the test like Static Load test,Shelf deflection

test. The unit shall be hanged on to the wall using metal screws of appropriate size and rawl plugs. The work shall be executed as per

drawing/Sample prepared in sample flat at site and direction of Engineer-in-charge. Only face area of openable shutter and drawer shall be

measured for payment. Cabinet with depth of 310 mm.

Digitally signed by ARTI

GUPTA 14:39:02 IST

Providing & placing top plain shelf (600mm*700mm*310mm) with openable glass shutters and having 0.6mm body panels & 1.2mm thick

horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653), components shall be powder coated with high quality

powders like Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H Min.

All shelves shall be supported on approved quality Selfsupporter and shall be adjustable for different heights as per requirements. Shutters to

be at least 18mm profile made out of at least 1.2mm thick in Galvanised steel. Shutters will be of steel solid facia.

Each shutter shall be fixed to the framework/carcass using two numbers of best quality CED coated hinges

14 ( Blum, Hettich approved make) i/c soft/Auto closing hinges 95 degree as per requirement(Hettich make or equivalent) fixed with SS 1 29653.4 29653

screws , nails etc complete and these shutters are provided with an approved quality of Godrej/hettich Arc 128 mm pitch Handle. Finished

components shall be tested for the critical quality parameter, Adhesion and impact test which enhances the life of kitchen. Shelves to be of

galvanised steel sheet with thickness of 1.2 mm. Steel carcase and shutters shall have passed the test like Static Load test,Shelf deflection

test. The unit shall be hanged on to the wall using metal screws of appropriate size and rawl plugs. The work shall be executed as per

drawing/Sample prepared in sample flat at site and direction of Engineer-in-charge. Only face area of openable shutter and drawer shall be

measured for payment. Cabinet with depth of 310 mm.

Total cost for one mess 739641.7 739642

Digitally signed by ARTI

GUPTA 14:39:02 IST

“Supply and Fixing of Furniture at Academic building, UG hostels and staff Quarters at College of Veterinary and Animal Sciences and college of Fisheries for RLBCAU at Datia, MP.”

BILL OF QUANTITIES OF FURNITURE FOR MODULAR KITCHEN (GIRLS HOSTEL MESS)

inclusive Amount in

S.No. Descriptions Qty Unit

Providing and fixing Hinged Unit below the sink 800mm x 560mm x 710 mm in Galvanized Steel & waste bin Holder of circular shape 290

mm diameter in SS- 304 grade.The shutters and carcase is in powder coated galavanised steel.The carcase have 0.6mm body panels &

1.2mm thick horizontal frames of Galvanized sheet with zero spangles (as per ASTM A653), components shall be powder coated with high

quality powders like DuPont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H min of approved

equivalent make. The powder coat would be fringyspus in nature and impart the same in appearance. The cabinet will be supported by

1 100mm height legs of Hettich or approved make covered by PVC skirting 100 mm height of Rehau or approved make..The units will have 1 37886.26 37886

Arc Handle pitch finished of Godrej/hettich.Finished components shall be tested for the critical quality parameters, Adhesion and impact

test which enhances the life of kitchen. The total cabinet height is 810mm including cabinet height of 710mm and 100mm

legs/skirting).The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and raw plugs. Only front face area of

cabinets and skirting from floor to top of boxes shall be considered for measurement and payment. The unit will be installed as per drawing

approved by the Engineer-in-Charge.

Providing and fixing 2 Drawer Unit of size 600mm x 560mm with a set of 2 solid galvanized steel drawers (size 150mm + 150mm) with

2 required size soft-closing Tranquil range Drawer System (Approx 530mm length) as per drawing in the existing space at site and as 1 Each 27204.9 27205

direction by Engineer-in-charge.

Providing and fixing 2 Drawer Unit of size 800mm x 560mm with a set of 2 solid galvanized steel drawers (size 150mm + 150mm) with

3 required size soft-closing Tranquil range Drawer System (Approx 530mm length) as per drawing in the existing space at site and as 1 Each 26154.7 26155

direction by Engineer-in-charge.

Providing and fixing 2 Drawer Unit of size 900mm x 560mm with a set of 2 solid galvanized steel drawers (size 150mm + 150mm) with

4 required size soft-closing Tranquil range Drawer System (Approx 530mm length) as per drawing in the existing space at site and as 1 109362.4 109362

direction by Engineer-in-charge.

Digitally signed by ARTI

GUPTA 14:39:02 IST

Providing & placing plain shelf (1000mm*700mm*310mm) with openable shutters and having 0.6mm body panels & 1.2mm thick

horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653), components shall be powder coated with high quality

powders like Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H Min.

All shelves shall be supported on approved quality Selfsupporter and shall be adjustable for different heights as per requirements. Shutters to

be at least 18mm profile made out of at least 1.2mm thick in Galvanised steel. Shutters will be of steel solid facia.

Each shutter shall be fixed to the framework/carcass using two numbers of best quality CED coated hinges

5 ( Blum, Hettich approved make) i/c soft/Auto closing hinges 95 degree as per requirement(Hettich make or equivalent) fixed with SS 1 143971.8 143972

screws , nails etc complete and these shutters are provided with an approved quality of Godrej/hettich Arc 128 mm pitch Handle. Finished

components shall be tested for the critical quality parameter, Adhesion and impact test which enhances the life of kitchen. Shelves to be of

galvanised steel sheet with thickness of 1.2 mm. Steel carcase and shutters shall have passed the test like Static Load test,Shelf deflection

test. The unit shall be hanged on to the wall using metal screws of appropriate size and rawl plugs. The work shall be executed as per

drawing/Sample prepared in sample flat at site and direction of Engineer-in-charge. Only face area of openable shutter and drawer shall be

measured for payment. Cabinet with depth of 310 mm.

Providing and fixing Corner Plain Shelf of size 1000mm x 560mm x 710 mm of Galvanized Steel.The shutter and carcase is in powder

coated galavanised steel.The carcase have 0.6mm body panels & 1.2mm thick horizontal frames of Galvanized sheet with zero spangles (as

per ASTM A653), components shall be powder coated with high quality powders like DuPont, Kanasai Nerolac with dry film thickness of

40 to 60 microns with pencil hardness of 2H min of approved equivalent make. The powder coat would be fringyspus in nature and impart

the same in appearance. All shelves should be supported on approved quality SS pins and shall be adjustable for different heights as per

6 requirements.The cabinet will be supported by 100mm height legs of Hettich or approved make covered by PVC skirting 100 mm height of 1 46959.28 46959

Rehau or approved make.The units will have Arc Handle pitch finished of Godrej make or equivalent.Finished components shall be tested

for the critical quality parameters, Adhesion and impact test which enhances the life of kitchen. The total cabinet height is 810mm

including cabinet height of 710mm and 100mm legs/skirting).The unit shall be fixed to the floor/ wall/slab using metal screws of

appropriate size and raw plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be considered for measurement

and payment.The unit will be installed as per drawing approved by the Engineer-in-Charge.

Providing and fixing Gas Cylinder Unit 500mm x 560mm x 710 mm & trolly of circular shape 290 mm diameter in SS- 304 grade.The

shutters will and carcase is in powder coated galavanised steel.The carcase have 0.6mm body panels & 1.2mm thick horizontal frames of

Galvanized sheet with zero spangles (as per ASTM A653), components shall be powder coated with high quality powders like DuPont,

Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H min of approved equivalent make. The powder coat

would be fringyspus in nature and impart the same in appearance. The cabinet will be supported by 100mm height legs of Hettich or

approved make covered by PVC skirting 100 mm height of Rehau or approved make..The units will have Arc Handle pitch finished of

Godrej make or equivalent.Finished components shall be tested for the critical quality parameters, Adhesion and impact test which enhances

the life of kitchen. The total cabinet height is 810mm including cabinet height of 710mm and 100mm legs/skirting).The unit shall be fixed

to the floor/ wall/slab using metal screws of appropriate size and raw plugs. Only front face area of cabinets and skirting from floor to top of

boxes shall be considered for measurement and payment. The unit will be installed as per drawing approved by the Engineer-in-Charge.

Providing and fixing 3 Drawer Unit of size 900mm x 560mm with a set of 3 solid galvanized steel drawers (size 100mm +100mm +

8 150mm) with required size soft-closing Tranquil range Drawer System (Approx 530mm length) and 1 PVC Cutlery Tray complete as per 1 Each 29254.56 29255

drawing in the existing space at site and as direction by Engineer-in-charge.

Digitally signed by ARTI

GUPTA 14:39:02 IST

Providing and fixing GTPT kit of size 900mm x 300mm x 50mm of SS- 304 grade withdiameter of 3mm wire set of 1 PVC water collecting

9 tray with 250mm and set of 2 SS wire tray with required SS screws for fixing of component of Godrej/hettich as per drawing in the exisitng 1 Each 26640.86 26641

space at site and as direction by the Engineer-in-Charge.

Providing & placing top plain shelf (1000mm*700mm*310mm) with openable shutters and having 0.6mm body panels & 1.2mm thick

horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653), components shall be powder coated with high quality

powders like Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H Min.

All shelves shall be supported on approved quality Selfsupporter and shall be adjustable for different heights as per requirements. Shutters to

be at least 18mm profile made out of at least 1.2mm thick in Galvanised steel. Shutters will be of steel solid facia.

Each shutter shall be fixed to the framework/carcass using two numbers of best quality CED coated hinges

10 ( Blum, Hettich approved make) i/c soft/Auto closing hinges 95 degree as per requirement(Hettich make or equivalent) fixed with SS 1 146821.5 146822

screws , nails etc complete and these shutters are provided with an approved quality of Godrej Arc 128 mm pitch Handle. Finished

components shall be tested for the critical quality parameter, Adhesion and impact test which enhances the life of kitchen. Shelves to be of

galvanised steel sheet with thickness of 1.2 mm. Steel carcase and shutters shall have passed the test like Static Load test,Shelf deflection

test. The unit shall be hanged on to the wall using metal screws of appropriate size and rawl plugs. The work shall be executed as per

drawing/Sample prepared in sample flat at site and direction of Engineer-in-charge. Only face area of openable shutter and drawer shall be

measured for payment. Cabinet with depth of 310 mm.

Providing & placing top plain shelf (900mm*700mm*310mm) with openable shutters and having 0.6mm body panels & 1.2mm thick

horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653), components shall be powder coated with high quality

powders like Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H Min.

All shelves shall be supported on approved quality Selfsupporter and shall be adjustable for different heights as per requirements. Shutters to

be at least 18mm profile made out of at least 1.2mm thick in Galvanised steel. Shutters will be of steel solid facia.

Each shutter shall be fixed to the framework/carcass using two numbers of best quality CED coated hinges

11 ( Blum, Hettich approved make) i/c soft/Auto closing hinges 95 degree as per requirement(Hettich make or equivalent) fixed with SS 1 40002 40002

screws , nails etc complete and these shutters are provided with an approved quality of Godrej/hettich Arc 128 mm pitch Handle. Finished

components shall be tested for the critical quality parameter, Adhesion and impact test which enhances the life of kitchen. Shelves to be of

galvanised steel sheet with thickness of 1.2 mm. Steel carcase and shutters shall have passed the test like Static Load test,Shelf deflection

test. The unit shall be hanged on to the wall using metal screws of appropriate size and rawl plugs. The work shall be executed as per

drawing/Sample prepared in sample flat at site and direction of Engineer-in-charge. Only face area of openable shutter and drawer shall be

measured for payment. Cabinet with depth of 310 mm.

Digitally signed by ARTI

GUPTA 14:39:02 IST

Providing & placing top plain shelf (500mm*700mm*310mm) with openable shutters and having 0.6mm body panels & 1.2mm thick

horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653), components shall be powder coated with high quality

powders like Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H Min.

All shelves shall be supported on approved quality Selfsupporter and shall be adjustable for different heights as per requirements. Shutters to

be at least 18mm profile made out of at least 1.2mm thick in Galvanised steel. Shutters will be of steel solid facia.

Each shutter shall be fixed to the framework/carcass using two numbers of best quality CED coated hinges

12 ( Blum, Hettich approved make) i/c soft/Auto closing hinges 95 degree as per requirement(Hettich make or equivalent) fixed with SS 1 Each 14998.98 14999

screws , nails etc complete and these shutters are provided with an approved quality of Godrej/hettich Arc 128 mm pitch Handle. Finished

components shall be tested for the critical quality parameter, Adhesion and impact test which enhances the life of kitchen. Shelves to be of

galvanised steel sheet with thickness of 1.2 mm. Steel carcase and shutters shall have passed the test like Static Load test,Shelf deflection

test. The unit shall be hanged on to the wall using metal screws of appropriate size and rawl plugs. The work shall be executed as per

drawing/Sample prepared in sample flat at site and direction of Engineer-in-charge. Only face area of openable shutter and drawer shall be

measured for payment. Cabinet with depth of 310 mm.

Providing & placing corner top plain shelf (600mm) with openable shutters and having 0.6mm body panels & 1.2mm thick horizontal

Frames of Galvanised sheet with zero spangels(as per ASTM A653), components shall be powder coated with high quality powders like

Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H Min.

All shelves shall be supported on approved quality Selfsupporter and shall be adjustable for different heights as per requirements. Shutters to

be at least 18mm profile made out of at least 1.2mm thick in Galvanised steel. Shutters will be of steel solid facia.

Each shutter shall be fixed to the framework/carcass using two numbers of best quality CED coated hinges

13 ( Blum, Hettich approved make) i/c soft/Auto closing hinges 95 degree as per requirement(Hettich make or equivalent) fixed with SS 1 44480.1 44480

screws , nails etc complete and these shutters are provided with an approved quality of Godrej/hettich Arc 128 mm pitch Handle. Finished

components shall be tested for the critical quality parameter, Adhesion and impact test which enhances the life of kitchen. Shelves to be of

galvanised steel sheet with thickness of 1.2 mm. Steel carcase and shutters shall have passed the test like Static Load test,Shelf deflection

test. The unit shall be hanged on to the wall using metal screws of appropriate size and rawl plugs. The work shall be executed as per

drawing/Sample prepared in sample flat at site and direction of Engineer-in-charge. Only face area of openable shutter and drawer shall be

measured for payment. Cabinet with depth of 310 mm.

Digitally signed by ARTI

GUPTA 14:39:02 IST

Providing & placing top plain shelf (600mm*700mm*310mm) with openable glass shutters and having 0.6mm body panels & 1.2mm thick

horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653), components shall be powder coated with high quality

powders like Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H Min.

All shelves shall be supported on approved quality Selfsupporter and shall be adjustable for different heights as per requirements. Shutters to

be at least 18mm profile made out of at least 1.2mm thick in Galvanised steel. Shutters will be of steel solid facia.

Each shutter shall be fixed to the framework/carcass using two numbers of best quality CED coated hinges

14 ( Blum, Hettich approved make) i/c soft/Auto closing hinges 95 degree as per requirement(Hettich make or equivalent) fixed with SS 1 29653.4 29653

screws , nails etc complete and these shutters are provided with an approved quality of Godrej/hettich Arc 128 mm pitch Handle. Finished

components shall be tested for the critical quality parameter, Adhesion and impact test which enhances the life of kitchen. Shelves to be of

galvanised steel sheet with thickness of 1.2 mm. Steel carcase and shutters shall have passed the test like Static Load test,Shelf deflection

test. The unit shall be hanged on to the wall using metal screws of appropriate size and rawl plugs. The work shall be executed as per

drawing/Sample prepared in sample flat at site and direction of Engineer-in-charge. Only face area of openable shutter and drawer shall be

measured for payment. Cabinet with depth of 310 mm.

Total cost for one mess 739641.7 739642

Digitally signed by ARTI

GUPTA 14:39:02 IST

“Supply and Fixing of Furniture at Academic building, UG hostels and staff Quarters at College of Veterinary and Animal Sciences and college of Fisheries for RLBCAU at

BILL OF QUANTITIES OF MODULAR KITCHEN FOR Type-III

S.No. Descriptions(Type -III ) Unit Qty inclusive of

Providing and fixing Hinged Unit below the sink 600mm x 560mm x 710 mm in Galvanized Steel & waste bin Holder of circular shape 290

mm diameter in SS- 304 grade.The shutters and carcase is in powder coated galavanised steel.The carcase have 0.6mm body panels & 1.2mm

thick horizontal frames of Galvanized sheet with zero spangles (as per ASTM A653), components shall be powder coated with high quality

powders like DuPont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H min of approved equivalent

make. The powder coat would be fringyspus in nature and impart the same in appearance. The cabinet will be supported by 100mm height legs

1 of Hettich or approved make covered by PVC skirting 100 mm height of Rehau or approved make..The units will have Arc Handle pitch One set 1 18186.16 18186.16

finished of Hettich/Godrej make or equivalent.Finished components shall be tested for the critical quality parameters, Adhesion and impact

test which enhances the life of kitchen. The total cabinet height is 810mm including cabinet height of 710mm and 100mm legs/skirting).The

unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and raw plugs. Only front face area of cabinets and skirting

from floor to top of boxes shall be considered for measurement and payment. The unit will be installed as per drawing approved by the

Engineer-in-Charge.

Providing and fixing 2 Drawer Unit of size 600mm x 560mm with a set of 2 solid galvanized steel drawers (size 150mm + 150mm) with

2 required size soft-closing Tranquil range Drawer System (Approx 530mm length) as per drawing in the existing space at site and as direction One set 1 27897.56 27897.56

by Engineer-in-charge.

Providing and fixing Corner Plain Shelf of size 1000mm x 560mm x 710 mm of Galvanized Steel.The shutter and carcase is in powder coated

galavanised steel.The carcase have 0.6mm body panels & 1.2mm thick horizontal frames of Galvanized sheet with zero spangles (as per

ASTM A653), components shall be powder coated with high quality powders like DuPont, Kanasai Nerolac with dry film thickness of 40 to

60 microns with pencil hardness of 2H min of approved equivalent make. The powder coat would be fringyspus in nature and impart the same

in appearance. All shelves should be supported on approved quality SS pins and shall be adjustable for different heights as per

3 requirements.The cabinet will be supported by 100mm height legs of Hettich or approved make covered by PVC skirting 100 mm height of One set 1 26642.04 26642.04

Rehau or approved make.The units will have Arc Handle pitch finished of Hettich/Godrej make or equivalent.Finished components shall be

tested for the critical quality parameters, Adhesion and impact test which enhances the life of kitchen. The total cabinet height is 810mm

including cabinet height of 710mm and 100mm legs/skirting).The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate

size and raw plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be considered for measurement and

payment.The unit will be installed as per drawing approved by the Engineer-in-Charge.

Digitally signed by ARTI

GUPTA 14:39:02 IST

Providing and fixing Gas Cylinder Unit 500mm x 560mm x 710 mm & trolly of circular shape 290 mm diameter in SS- 304 grade.The

shutters will and carcase is in powder coated galavanised steel.The carcase have 0.6mm body panels & 1.2mm thick horizontal frames of

Galvanized sheet with zero spangles (as per ASTM A653), components shall be powder coated with high quality powders like DuPont,

Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H min of approved equivalent make. The powder coat

would be fringyspus in nature and impart the same in appearance. The cabinet will be supported by 100mm height legs of Hettich or approved

make covered by PVC skirting 100 mm height of Rehau or approved make..The units will have Arc Handle pitch finished of Hettich/Godrej

make or equivalent.Finished components shall be tested for the critical quality parameters, Adhesion and impact test which enhances the life of

kitchen. The total cabinet height is 810mm including cabinet height of 710mm and 100mm legs/skirting).The unit shall be fixed to the floor/

wall/slab using metal screws of appropriate size and raw plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be

considered for measurement and payment. The unit will be installed as per drawing approved by the Engineer-in-Charge.

Providing and fixing 3 Drawer Unit of size 600mm x 560mm with a set of 3 solid galvanized steel drawers (size 100mm +100mm + 150mm)

5 with required size soft-closing Tranquil range Drawer System (Approx 530mm length) and 1 PVC Cutlery Tray complete as per drawing in the One set 1 37387.12 37387.12

existing space at site and as direction by Engineer-in-charge.

Providing and fixing Grocery Basket set of size 600mm x 560mm of SS-304 grade with 2 plain wire baskets 100 mm and 200mm height with

6 required SS screw for fixing of component with required size (approx. 530mm length) Soft closing Serene channels as per drawing in the One set 1 33310.22 33310.22

existing space at site and as direction by the Engineer-in-Charge.

Providing and fixing Counter Plain Shelf of size 300mm x 410mm of Galvanized Steel.The shutter and carcase is in powder coated

galavanised steel.The carcase have 0.6mm body panels & 1.2mm thick horizontal frames of Galvanized sheet with zero spangles (as per

ASTM A653), components shall be powder coated with high quality powders like DuPont, Kanasai Nerolac with dry film thickness of 40 to

60 microns with pencil hardness of 2H min of approved equivalent make. The powder coat would be fringyspus in nature and impart the same

in appearance. All shelves should be supported on approved quality SS pins and shall be adjustable for different heights as per

7 requirements.The cabinet will be supported by 100mm height legs of Hettich or approved make covered by PVC skirting 100 mm height of One set 1 15900.5 15900.50

Rehau or approved make.The units will have Arc Handle pitch finished of Hettich/Godrej make or equivalent.Finished components shall be

tested for the critical quality parameters, Adhesion and impact test which enhances the life of kitchen. The total cabinet height is 810mm

including cabinet height of 710mm and 100mm legs/skirting).The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate

size and raw plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be considered for measurement and

payment.The unit will be installed as per drawing approved by the Engineer-in-Charge.

Providing and fixing GTPT kit of size 600mm x 300mm x 50mm of SS- 304 grade withdiameter of 3mm wire set of 1 PVC water collecting tray

8 with 250mm and set of 2 SS wire tray with required SS screws for fixing of component of Hettich/Godrej approved equivalent make One set 1 22264.24 22264.24

complete as per drawing in the exisitng space at site and as direction by the Engineer-in-Charge.

Digitally signed by ARTI

GUPTA 14:39:02 IST

Providing & placing top plain shelf (600mm*700mm*310mm) with openable shutters and having 0.6mm body panels & 1.2mm thick

horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653), components shall be powder coated with high quality powders

like Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H Min.

All shelves shall be supported on approved quality Selfsupporter and shall be adjustable for different heights as per requirements. Shutters to

be at least 18mm profile made out of at least 1.2mm thick in Galvanised steel. Shutters will be of steel solid facia.

Each shutter shall be fixed to the framework/carcass using two numbers of best quality CED coated hinges ( Blum, Hettich approved make)

9 i/c soft/Auto closing hinges 95 degree as per requirement(Hettich make or equivalent) fixed with SS screws , nails etc complete and these One set 1 20388.04 20388.04

shutters are provided with an approved quality of Hettich/Godrej Arc 128 mm pitch Handle. Finished components shall be tested for the

critical quality parameter, Adhesion and impact test which enhances the life of kitchen. Shelves to be of galvanised steel sheet with thickness

of 1.2 mm. Steel carcase and shutters shall have passed the test like Static Load test,Shelf deflection test. The unit shall be hanged on to

the wall using metal screws of appropriate size and rawl plugs. The work shall be executed as per drawing/Sample prepared in sample flat at

site and direction of Engineer-in-charge. Only face area of openable shutter and drawer shall be measured for payment. Cabinet with depth of

Providing & placing corner top plain shelf (600mm) with openable shutters and having 0.6mm body panels & 1.2mm thick horizontal Frames

of Galvanised sheet with zero spangels(as per ASTM A653), components shall be powder coated with high quality powders like Dupont,

Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H Min.

All shelves shall be supported on approved quality Selfsupporter and shall be adjustable for different heights as per requirements. Shutters to

be at least 18mm profile made out of at least 1.2mm thick in Galvanised steel. Shutters will be of steel solid facia.

Each shutter shall be fixed to the framework/carcass using two numbers of best quality CED coated hinges ( Blum, Hettich approved make)

10 i/c soft/Auto closing hinges 95 degree as per requirement(Hettich make or equivalent) fixed with SS screws , nails etc complete and these One set 1 25252 25252.00

shutters are provided with an approved quality of Hettich/Godrej Arc 128 mm pitch Handle. Finished components shall be tested for the

critical quality parameter, Adhesion and impact test which enhances the life of kitchen. Shelves to be of galvanised steel sheet with thickness

of 1.2 mm. Steel carcase and shutters shall have passed the test like Static Load test,Shelf deflection test. The unit shall be hanged on to

the wall using metal screws of appropriate size and rawl plugs. The work shall be executed as per drawing/Sample prepared in sample flat at

site and direction of Engineer-in-charge. Only face area of openable shutter and drawer shall be measured for payment. Cabinet with depth of

Providing & placing top plain shelf (300mm) with openable shutters and having 0.6mm body panels & 1.2mm thick horizontal Frames of

Galvanised sheet with zero spangels(as per ASTM A653), components shall be powder coated with high quality powders like Dupont, Kanasai

Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H Min.

All shelves shall be supported on approved quality Selfsupporter and shall be adjustable for different heights as per requirements. Shutters to

be at least 18mm profile made out of at least 1.2mm thick in Galvanised steel. Shutters will be of steel solid facia.

Each shutter shall be fixed to the framework/carcass using two numbers of best quality CED coated hinges ( Blum, Hettich approved make)

11 i/c soft/Auto closing hinges 95 degree as per requirement(Hettich make or equivalent) fixed with SS screws , nails etc complete and these One set 1 15607.86 15607.86

shutters are provided with an approved quality of Hettich/Godrej Arc 128 mm pitch Handle. Finished components shall be tested for the

critical quality parameter, Adhesion and impact test which enhances the life of kitchen. Shelves to be of galvanised steel sheet with thickness

of 1.2 mm. Steel carcase and shutters shall have passed the test like Static Load test,Shelf deflection test. The unit shall be hanged on to

the wall using metal screws of appropriate size and rawl plugs. The work shall be executed as per drawing/Sample prepared in sample flat at

site and direction of Engineer-in-charge. Only face area of openable shutter and drawer shall be measured for payment. Cabinet with depth of

Digitally signed by ARTI

GUPTA 14:39:02 IST

Providing & placing top plain shelf (600mm*700mm*310mm) with openable glass shutters and having 0.6mm body panels & 1.2mm thick

horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653), components shall be powder coated with high quality powders

like Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H Min.

All shelves shall be supported on approved quality Selfsupporter and shall be adjustable for different heights as per requirements. Shutters to

be at least 18mm profile made out of at least 1.2mm thick in Galvanised steel. Shutters will be of steel solid facia.

Each shutter shall be fixed to the framework/carcass using two numbers of best quality CED coated hinges ( Blum, Hettich approved make)

12 i/c soft/Auto closing hinges 95 degree as per requirement(Hettich make or equivalent) fixed with SS screws , nails etc complete and these One set 1 43197.44 43197.44

shutters are provided with an approved quality of Hettich/Godrej Arc 128 mm pitch Handle. Finished components shall be tested for the

critical quality parameter, Adhesion and impact test which enhances the life of kitchen. Shelves to be of galvanised steel sheet with thickness

of 1.2 mm. Steel carcase and shutters shall have passed the test like Static Load test,Shelf deflection test. The unit shall be hanged on to

the wall using metal screws of appropriate size and rawl plugs. The work shall be executed as per drawing/Sample prepared in sample flat at

site and direction of Engineer-in-charge. Only face area of openable shutter and drawer shall be measured for payment. Cabinet with depth of

Total cost for one kitchen 303209

Total cost for 12 nos kitchen 3638511

Digitally signed by ARTI

GUPTA 14:39:02 IST

“Supply and Fixing of Furniture at Academic building, UG hostels and staff Quarters at College of Veterinary and Animal Sciences and college of Fisheries for RLBCAU at Datia, MP.”

BILL OF QUANTITIES OF MODULAR KITCHEN FOR Type-IV

S.No. Descriptions(Type -IV Qtrs ) Rate

Unit Qty inclusive of

Providing and fixing Hinged Unit below the sink 900mm x 560mm x 710 mm in Galvanized Steel & waste bin Holder of circular shape 290 mm diameter in SS- 304 grade.The

shutters and carcase is in powder coated galavanised steel.The carcase have 0.6mm body panels & 1.2mm thick horizontal frames of Galvanized sheet with zero spangles (as per

ASTM A653), components shall be powder coated with high quality powders like DuPont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H

min of approved equivalent make. The powder coat would be fringyspus in nature and impart the same in appearance. The cabinet will be supported by 100mm height legs of

Hettich or approved make covered by PVC skirting 100 mm height of Rehau or approved make..The units will have Arc Handle pitch finished of Hettich/Godrej make or

equivalent.Finished components shall be tested for the critical quality parameters, Adhesion and impact test which enhances the life of kitchen. The total cabinet height is 810mm

1 including cabinet height of 710mm and 100mm legs/skirting).The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and raw plugs. Only front face area One set 1 26316.36 26316.36

of cabinets and skirting from floor to top of boxes shall be considered for measurement and payment. The unit will be installed as per drawing approved by the Engineer-in-Charge.

Providing and fixing Bottle pullout Basket set of size 300mm x 560mm x 500mm of SS- 304 grade set of 1 plain SS wire basket with required SS screw for fixing of component

2 with required size soft/Auto closing base telescopic channel/bracket of approved equivalent make complete as per drawing in the exisitng space at site and as direction by the Bank’s One set 1 33893.14 33893.14

Engineer-in-Charge.

Providing and fixing Corner Plain Shelf of size 1000mm x 560mm x 710 mm of Galvanized Steel.The shutter and carcase is in powder coated galavanised steel.The carcase have

0.6mm body panels & 1.2mm thick horizontal frames of Galvanized sheet with zero spangles (as per ASTM A653), components shall be powder coated with high quality powders

like DuPont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H min of approved equivalent make. The powder coat would be fringyspus in

nature and impart the same in appearance. All shelves should be supported on approved quality SS pins and shall be adjustable for different heights as per requirements.The cabinet

will be supported by 100mm height legs of Hettich or approved make covered by PVC skirting 100 mm height of Rehau or approved make.The units will have Arc Handle pitch

finished of Hettich/Godrej make or equivalent.Finished components shall be tested for the critical quality parameters, Adhesion and impact test which enhances the life of kitchen.

3 The total cabinet height is 810mm including cabinet height of 710mm and 100mm legs/skirting).The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size One set 1 30084.1 30084.1

and raw plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be considered for measurement and payment.The unit will be installed as per drawing

approved by the Engineer-in-Charge.

Providing and fixing Gas Cylinder Unit 600mm x 560mm x 710 mm & trolly of circular shape 290 mm diameter in SS- 304 grade.The shutters will and carcase is in powder coated

galavanised steel.The carcase have 0.6mm body panels & 1.2mm thick horizontal frames of Galvanized sheet with zero spangles (as per ASTM A653), components shall be powder

coated with high quality powders like DuPont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H min of approved equivalent make. The

powder coat would be fringyspus in nature and impart the same in appearance. The cabinet will be supported by 100mm height legs of Hettich or approved make covered by PVC

skirting 100 mm height of Rehau or approved make..The units will have Arc Handle pitch finished of Hettich/Godrej make or equivalent.Finished components shall be tested for the

critical quality parameters, Adhesion and impact test which enhances the life of kitchen. The total cabinet height is 810mm including cabinet height of 710mm and 100mm

4 legs/skirting).The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and raw plugs. Only front face area of cabinets and skirting from floor to top of One set 1 19477.08 19477.08

boxes shall be considered for measurement and payment. The unit will be installed as per drawing approved by the Engineer-in-Charge.

Providing and fixing 3 Drawer Unit of size 600mm x 560mm with a set of 3 solid galvanized steel drawers (size 100mm +100mm + 150mm) with required size soft-closing

5 Tranquil range Drawer System (Approx 530mm length) of Hettich/Godrej or approved equivalent make and 1 PVC Cutlery Tray complete as per drawing in the existing space at site One set 1 38508.12 38508.12

and as direction by Engineer-in-charge.

Providing and fixing Grocery Basket set of size 600mm x 560mm of SS-304 grade with 2 plain wire baskets 100 mm and 200mm height with required SS screw for fixing of

6 component with required size (approx. 530mm length) Soft closing Serene channels of Godrej or approved equivalent make complete as per drawing in the existing space at site and One set 1 34431.22 34431.22

as direction by the Engineer-in-Charge.

Digitally signed by ARTI

GUPTA 14:39:02 IST

Providing & placing top plain shelf (1000mm*700mm*310mm) with openable shutters and having 0.6mm body panels & 1.2mm thick horizontal Frames of Galvanised sheet with

zero spangels(as per ASTM A653), components shall be powder coated with high quality powders like Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with

pencil hardness of 2H Min. All shelves shall be supported on approved quality Selfsupporter and shall be adjustable for different heights as per requirements. Shutters to be at least

18mm profile made out of at least 1.2mm thick in Galvanised steel. Shutters will be of steel solid facia.

Each shutter shall be fixed to the framework/carcass using two numbers of best quality CED coated hinges ( Blum, Hettich approved make) i/c soft/Auto closing hinges 95 degree

as per requirement(Hettich make or equivalent) fixed with SS screws , nails etc complete and these shutters are provided with an approved quality of Hettich/Godrej Arc 128 mm

7 pitch Handle. Finished components shall be tested for the critical quality parameter, Adhesion and impact test which enhances the life of kitchen. Shelves to be of galvanised steel One set 1 27019.64 27019.64

sheet with thickness of 1.2 mm. Steel carcase and shutters shall have passed the test like Static Load test,Shelf deflection test. The unit shall be hanged on to

the wall using metal screws of appropriate size and rawl plugs. The work shall be executed as per drawing/Sample prepared in sample flat at site and direction of Engineer-in-charge.

Only face area of openable shutter and drawer shall be measured for payment. Cabinet with depth of 310 mm.

Providing & placing top plain shelf (600mm*700mm*310mm) with openable glass shutters and having 0.6mm body panels & 1.2mm thick horizontal Frames of Galvanised sheet

with zero spangels(as per ASTM A653), components shall be powder coated with high quality powders like Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns

with pencil hardness of 2H Min. All shelves shall be supported on approved quality Selfsupporter and shall be adjustable for different heights as per requirements. Shutters to be at

least 18mm profile made out of at least 1.2mm thick in Galvanised steel. Shutters will be of steel solid facia.

Each shutter shall be fixed to the framework/carcass using two numbers of best quality CED coated hinges ( Blum, Hettich approved make) i/c soft/Auto closing hinges 95 degree

as per requirement(Hettich make or equivalent) fixed with SS screws , nails etc complete and these shutters are provided with an approved quality of Hettich/Godrej Arc 128 mm

8 pitch Handle. Finished components shall be tested for the critical quality parameter, Adhesion and impact test which enhances the life of kitchen. Shelves to be of galvanised steel One set 1 51693.44 51693.44

sheet with thickness of 1.2 mm. Steel carcase and shutters shall have passed the test like Static Load test,Shelf deflection test. The unit shall be hanged on to

the wall using metal screws of appropriate size and rawl plugs. The work shall be executed as per drawing/Sample prepared in sample flat at site and direction of Engineer-in-charge.

Only face area of openable shutter and drawer shall be measured for payment. Cabinet with depth of 310 mm.

Total cost for one kitchen 261423.1

Total cost for 12 nos kitchen 3137077

Digitally signed by ARTI

GUPTA 14:39:02 IST

“Supply and Fixing of Furniture at Academic building, UG hostels and staff Quarters at College of Veterinary and Animal Sciences and college of Fisheries for RLBCAU at Datia, MP.”

BILL OF QUANTITIES OF MODULAR KITCHEN FOR Type-V

S.No. Descriptions(Type -V) Unit Qty inclusive of

Providing and fixing Hinged Unit below the sink 800mm x 560mm x 710 mm in Galvanized Steel & waste bin Holder of

circular shape 290 mm diameter in SS- 304 grade.The shutters and carcase is in powder coated galavanised steel.The

carcase have 0.6mm body panels & 1.2mm thick horizontal frames of Galvanized sheet with zero spangles (as per ASTM

A653), components shall be powder coated with high quality powders like DuPont, Kanasai Nerolac with dry film thickness

of 40 to 60 microns with pencil hardness of 2H min of approved equivalent make. The powder coat would be fringyspus in

nature and impart the same in appearance. The cabinet will be supported by 100mm height legs of Hettich or approved

make covered by PVC skirting 100 mm height of Rehau or approved make..The units will have Arc Handle pitch finished

.Finished components shall be tested for the critical quality parameters, Adhesion and impact test which enhances the life of

kitchen. The total cabinet height is 810mm including cabinet height of 710mm and 100mm legs/skirting).The unit shall be

fixed to the floor/ wall/slab using metal screws of appropriate size and raw plugs. Only front face area of cabinets and

skirting from floor to top of boxes shall be considered for measurement and payment. The unit will be installed as per

drawing approved by the Engineer-in-Charge.

Providing and fixing Bottle pullout Basket set of size 300mm x 560mm x 500mm of SS- 304 grade set of 1 plain SS wire

basket with required SS screw for fixing of component with required size soft/Auto closing base telescopic channel/bracket

of approved equivalent make complete as per drawing in the exisitng space at site and as direction by the Bank’s Engineer-

Digitally signed by ARTI

GUPTA 14:39:02 IST

Providing and fixing Corner Plain Shelf of size 1000mm x 560mm x 710 mm of Galvanized Steel.The shutter and carcase

is in powder coated galavanised steel.The carcase have 0.6mm body panels & 1.2mm thick horizontal frames of Galvanized

sheet with zero spangles (as per ASTM A653), components shall be powder coated with high quality powders like DuPont,

Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H min of approved equivalent make.

The powder coat would be fringyspus in nature and impart the same in appearance. All shelves should be supported on

approved quality SS pins and shall be adjustable for different heights as per requirements.The cabinet will be supported by

100mm height legs of Hettich or approved make covered by PVC skirting 100 mm height of Rehau or approved make.The

units will have Arc Handle pitch finished of Hettich/Godrej make or equivalent.Finished components shall be tested for the

critical quality parameters, Adhesion and impact test which enhances the life of kitchen. The total cabinet height is 810mm

including cabinet height of 710mm and 100mm legs/skirting).The unit shall be fixed to the floor/ wall/slab using metal

screws of appropriate size and raw plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be

considered for measurement and payment.The unit will be installed as per drawing approved by the Engineer-in-Charge.

Providing and fixing Gas Cylinder Unit 450mm x 560mm x 710 mm & trolly of circular shape 290 mm diameter in SS- 304

grade.The shutters will and carcase is in powder coated galavanised steel.The carcase have 0.6mm body panels & 1.2mm

thick horizontal frames of Galvanized sheet with zero spangles (as per ASTM A653), components shall be powder coated

with high quality powders like DuPont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of

2H min of approved equivalent make. The powder coat would be fringyspus in nature and impart the same in appearance.

4 The cabinet will be supported by 100mm height legs of Hettich or approved make covered by PVC skirting 100 mm height One set 1 15745.92 15745.92

of Rehau or approved make..The units will have Arc Handle pitch finished.Finished components shall be tested for the

critical quality parameters, Adhesion and impact test which enhances the life of kitchen. The total cabinet height is 810mm

including cabinet height of 710mm and 100mm legs/skirting).The unit shall be fixed to the floor/ wall/slab using metal

screws of appropriate size and raw plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be

considered for measurement and payment. The unit will be installed as per drawing approved by the Engineer-in-Charge.

Providing and fixing 3 Drawer Unit of size 600mm x 560mm with a set of 3 solid galvanized steel drawers (size 100mm

+100mm + 150mm) with required size soft-closing Tranquil range Drawer System (Approx 530mm length) of

Hettich/Godrej or approved equivalent make and 1 PVC Cutlery Tray complete as per drawing in the existing space at site

and as direction by Engineer-in-charge.

Providing and fixing Grocery Basket set of size 600mm x 560mm of SS-304 grade with 2 plain wire baskets 100 mm and

6 200mm height with required SS screw for fixing of component with required size (approx. 530mm length) Soft closing One set 1 30130.12 30130.12

Serene channels as per drawing in the existing space at site and as direction by the Engineer-in-Charge.

Digitally signed by ARTI

GUPTA 14:39:02 IST

Providing & placing top plain shelf (600mm*700mm*310mm) with openable shutters and having 0.6mm body panels &

1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653), components shall be powder

coated with high quality powders like Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil

hardness of 2H Min.

All shelves shall be supported on approved quality Selfsupporter and shall be adjustable for different heights as per require

ments. Shutters to be at least 18mm profile made out of at least 1.2mm thick in Galvanised steel. Shutters will be of steel

solid facia. Each shutter shall be fixed to the framework/carcass using two numbers of best quality CED coated hinges

7 ( Blum, Hettich approved make) i/c soft/Auto closing hinges 95 degree as per requirement(Hettich make or equivalent) One set 1 19138.42 19138.42

fixed with SS screws , nails etc complete and these shutters are provided with an approved quality of Hettich/Godrej Arc

128 mm pitch Handle. Finished components shall be tested for the critical quality parameter, Adhesion and impact test

which enhances the life of kitchen. Shelves to be of galvanised steel sheet with thickness of 1.2 mm. Steel carcase and

shutters shall have passed the test like Static Load test,Shelf deflection test. The unit shall be hanged on to

the wall using metal screws of appropriate size and rawl plugs. The work shall be executed as per drawing/Sample prepared

in sample flat at site and direction of Engineer-in-charge. Only face area of openable shutter and drawer shall be measured

for payment. Cabinet with depth of 310 mm.

Providing and fixing GTPT kit of size 600mm x 300mm x 50mm of SS- 304 grade withdiameter of 3mm wire set of 1 PVC

8 water collecting tray with 250mm and set of 2 SS wire tray with required SS screws for fixing of component as per drawing One set 1 23067.82 23067.82

in the exisitng space at site and as direction by the Engineer-in-Charge.

Providing & placing top plain shelf (900mm*700mm*310mm) with openable glass shutters and having 0.6mm body

panels & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653), components shall be

powder coated with high quality powders like Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with

pencil hardness of 2H Min.

All shelves shall be supported on approved quality Selfsupporter and shall be adjustable for different heights as per requir

ements. Shutters to be at least 18mm profile made out of at least 1.2mm thick in Galvanised steel. Shutters will be of steel

solid facia. Each shutter shall be fixed to the framework/carcass using two numbers of best quality CED coated hinges

9 ( Blum, Hettich approved make) i/c soft/Auto closing hinges 95 degree as per requirement(Hettich make or equivalent) One set 1 49899.84 49899.84

fixed with SS screws , nails etc complete and these shutters are provided with an approved quality of Hettich/Godrej Arc

128 mm pitch Handle. Finished components shall be tested for the critical quality parameter, Adhesion and impact test

which enhances the life of kitchen. Shelves to be of galvanised steel sheet with thickness of 1.2 mm. Steel carcase and

shutters shall have passed the test like Static Load test,Shelf deflection test. The unit shall be hanged on to

the wall using metal screws of appropriate size and rawl plugs. The work shall be executed as per drawing/Sample

prepared in sample flat at site and direction of Engineer-in-charge. Only face area of openable shutter and drawer shall be

measured for payment. Cabinet with depth of 310 mm.

Total Cost for one kitchen Total 287333.54

Total Cost for 4 nos kitchen 1149334.2

Digitally signed by ARTI

GUPTA 14:39:02 IST

“Supply and Fixing of Furniture at Academic building, UG hostels and staff Quarters at College of Veterinary and Animal Sciences and college of Fisheries for RLBCAU at Datia, MP.”

BILL OF QUANTITIES OF MODULAR KITCHEN FOR Type-VI

S.No. Descriptions Unit Qty inclusive of

Providing and fixing Hinged Unit below the sink 800mm x 560mm x 710 mm in Galvanized Steel & waste bin Holder of

circular shape 290 mm diameter in SS- 304 grade.The shutters and carcase is in powder coated galavanised steel.The

carcase have 0.6mm body panels & 1.2mm thick horizontal frames of Galvanized sheet with zero spangles (as per ASTM

A653), components shall be powder coated with high quality powders like DuPont, Kanasai Nerolac with dry film thickness

of 40 to 60 microns with pencil hardness of 2H min of approved equivalent make. The powder coat would be fringyspus in

nature and impart the same in appearance. The cabinet will be supported by 100mm height legs of Hettich or approved

make covered by PVC skirting 100 mm height of Rehau or approved make..The units will have Arc Handle pitch finished

.Finished components shall be tested for the critical quality parameters, Adhesion and impact test which enhances the life of

kitchen. The total cabinet height is 810mm including cabinet height of 710mm and 100mm legs/skirting).The unit shall be

fixed to the floor/ wall/slab using metal screws of appropriate size and raw plugs. Only front face area of cabinets and

skirting from floor to top of boxes shall be considered for measurement and payment. The unit will be installed as per

drawing approved by the Engineer-in-Charge.

Providing and fixing Bottle pullout Basket set of size 300mm x 560mm x 500mm of SS- 304 grade set of 1 plain SS wire

basket with required SS screw for fixing of component with required size soft/Auto closing base telescopic channel/bracket

of approved equivalent make complete as per drawing in the exisitng space at site and as direction by the Engineer-in-

Providing and fixing Corner Plain Shelf of size 1000mm x 560mm x 710 mm of Galvanized Steel.The shutter and carcase

is in powder coated galavanised steel.The carcase have 0.6mm body panels & 1.2mm thick horizontal frames of Galvanized

sheet with zero spangles (as per ASTM A653), components shall be powder coated with high quality powders like DuPont,

Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H min of approved equivalent make.

The powder coat would be fringyspus in nature and impart the same in appearance. All shelves should be supported on

approved quality SS pins and shall be adjustable for different heights as per requirements.The cabinet will be supported by

100mm height legs of Hettich or approved make covered by PVC skirting 100 mm height of Rehau or approved make.The

units will have Arc Handle pitch finished of Hettich/Godrej make or equivalent.Finished components shall be tested for the

critical quality parameters, Adhesion and impact test which enhances the life of kitchen. The total cabinet height is 810mm

including cabinet height of 710mm and 100mm legs/skirting).The unit shall be fixed to the floor/ wall/slab using metal

screws of appropriate size and raw plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be

considered for measurement and payment.The unit will be installed as per drawing approved by the Engineer-in-Charge.

Digitally signed by ARTI

GUPTA 14:39:02 IST

Providing and fixing Gas Cylinder Unit 450mm x 560mm x 710 mm & trolly of circular shape 290 mm diameter in SS- 304

grade.The shutters will and carcase is in powder coated galavanised steel.The carcase have 0.6mm body panels & 1.2mm

thick horizontal frames of Galvanized sheet with zero spangles (as per ASTM A653), components shall be powder coated

with high quality powders like DuPont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of

2H min of approved equivalent make. The powder coat would be fringyspus in nature and impart the same in appearance.

4 The cabinet will be supported by 100mm height legs of Hettich or approved make covered by PVC skirting 100 mm height One set 1 15745.92 15745.92

of Rehau or approved make..The units will have Arc Handle pitch finished.Finished components shall be tested for the

critical quality parameters, Adhesion and impact test which enhances the life of kitchen. The total cabinet height is 810mm

including cabinet height of 710mm and 100mm legs/skirting).The unit shall be fixed to the floor/ wall/slab using metal

screws of appropriate size and raw plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be

considered for measurement and payment. The unit will be installed as per drawing approved by the Engineer-in-Charge.

Providing and fixing 3 Drawer Unit of size 600mm x 560mm with a set of 3 solid galvanized steel drawers (size 100mm

+100mm + 150mm) with required size soft-closing Tranquil range Drawer System (Approx 530mm length) of

Hettich/Godrej or approved equivalent make and 1 PVC Cutlery Tray complete as per drawing in the existing space at site

and as direction by Engineer-in-charge.

Providing and fixing Grocery Basket set of size 600mm x 560mm of SS-304 grade with 2 plain wire baskets 100 mm and

6 200mm height with required SS screw for fixing of component with required size (approx. 530mm length) Soft closing One set 1 30130.12 30130.12

Serene channels as per drawing in the existing space at site and as direction by the Engineer-in-Charge.

Providing & placing top plain shelf (600mm*700mm*310mm) with openable shutters and having 0.6mm body panels &

1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653), components shall be powder

coated with high quality powders like Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil

hardness of 2H Min.

All shelves shall be supported on approved quality Selfsupporter and shall be adjustable for different heights as per require

ments. Shutters to be at least 18mm profile made out of at least 1.2mm thick in Galvanised steel. Shutters will be of steel

solid facia. Each shutter shall be fixed to the framework/carcass using two numbers of best quality CED coated hinges

7 ( Blum, Hettich approved make) i/c soft/Auto closing hinges 95 degree as per requirement(Hettich make or equivalent) One set 1 19138.42 19138.42

fixed with SS screws , nails etc complete and these shutters are provided with an approved quality of Hettich/Godrej Arc

128 mm pitch Handle. Finished components shall be tested for the critical quality parameter, Adhesion and impact test

which enhances the life of kitchen. Shelves to be of galvanised steel sheet with thickness of 1.2 mm. Steel carcase and

shutters shall have passed the test like Static Load test,Shelf deflection test. The unit shall be hanged on to

the wall using metal screws of appropriate size and rawl plugs. The work shall be executed as per drawing/Sample prepared

in sample flat at site and direction of Engineer-in-charge. Only face area of openable shutter and drawer shall be measured

for payment. Cabinet with depth of 310 mm.

Providing and fixing GTPT kit of size 600mm x 300mm x 50mm of SS- 304 grade withdiameter of 3mm wire set of 1 PVC

8 water collecting tray with 250mm and set of 2 SS wire tray with required SS screws for fixing of component as per drawing One set 1 23067.82 23067.82

in the exisitng space at site and as direction by the Engineer-in-Charge.

Digitally signed by ARTI

GUPTA 14:39:02 IST

Providing & placing top plain shelf (900mm*700mm*310mm) with openable glass shutters and having 0.6mm body

panels & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels(as per ASTM A653), components shall be

powder coated with high quality powders like Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with

pencil hardness of 2H Min.

All shelves shall be supported on approved quality Selfsupporter and shall be adjustable for different heights as per requir

ements. Shutters to be at least 18mm profile made out of at least 1.2mm thick in Galvanised steel. Shutters will be of steel

solid facia. Each shutter shall be fixed to the framework/carcass using two numbers of best quality CED coated hinges

9 ( Blum, Hettich approved make) i/c soft/Auto closing hinges 95 degree as per requirement(Hettich make or equivalent) One set 1 49899.84 49899.84

fixed with SS screws , nails etc complete and these shutters are provided with an approved quality of Hettich/Godrej Arc

128 mm pitch Handle. Finished components shall be tested for the critical quality parameter, Adhesion and impact test

which enhances the life of kitchen. Shelves to be of galvanised steel sheet with thickness of 1.2 mm. Steel carcase and

shutters shall have passed the test like Static Load test,Shelf deflection test. The unit shall be hanged on to

the wall using metal screws of appropriate size and rawl plugs. The work shall be executed as per drawing/Sample

prepared in sample flat at site and direction of Engineer-in-charge. Only face area of openable shutter and drawer shall be

measured for payment. Cabinet with depth of 310 mm.

Total cost for one kitchen 287333.54

Total cost for 2 nos kitchen 574667.08

Digitally signed by ARTI

GUPTA 14:39:02 IST