PROVISION OF FACELIFT TO SECURITY WALL AROUND RUNWAY WITH EXTERIOR EMULSION PAINT ALONGWITH ALLIED WORK AT TECHINICAL AREA AND ADDITION/ALTERATION AND IMPROVEMENT TO BUILDING NO P-137 AND PROVISION OF ADDITIONAL STREET LIGHTS FOR ILLUMINATION OF PERI

Taking down cement plaster on brick masonry walls / ceiling built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.

M&L for rendering in CM 1:4, 15 mm thick in two coats (10 mm under coat + 5mm finishing coat) on brick/concrete surfaces with 3% water proofing compound in finishing coat and finishing the surface even and fair complete all as specified and directed. Rate will be inclusive of water proofiing compound also.

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces completed all as specified and directed.

Material & Labour for complete removal of existing treatment and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding not (but not backing), removing serviceable tiles to store and rubbish off the premises and removal of debries out side from MD land etc complete all specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed by Engineer -in-charge

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense soil all specified and directed.

M&L for Cement concrete in foundations, filling and mass concrete type D2 (1:4:8) in foundations of bed of drains, filling and mass concrete all specified and directed.

M&L for Returning, filling in soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified.

Removing excavated material to a distance exc 250 m but n exc 500 m and depositing where directed outside MOD land. Note: It is responsibility of the contractor to get permission from Local Authorities for site of disposal of material.

M&L for Walling of random rubble, uncoursed well bonded, bedded and solidly hearted as built in Cement mortar 1:4

M&L for Pre-cast cement concrete block masonry type C-1, 1:3:6 (20mm graded aggregate) set in cement mortar 1:4 with solid blocks, exc. 10 cm in width and setting in mortar, complete

Taking down cement or cement lime plaster, any description on brick or stone walls built in cement or cement lime mortar, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L 15mm thick rendering in cement mortar (1:6) internal plaster on brick /concrete surface and surface finished even and smoth without using extra cement etc complete all as specified and directed.

Supply only integral WPC all as specified & directed.

M&L for preparation of newly plastered surface and applying two coats of oil bound distemper paint on walls over a coat of alkali resistant primer over and including 3mm thick wall care putty on wall surfaces complete all as specified and directed.

M&L for preparation on new plastered surface of wall, chajja, parapet etc and appiying two coats of acrylic emulsion paint (two or more coat [email protected] ltr/10 sqm over including priming coat of exterior primer applied @ 2.20Kg/10 sqm ) and 3mm thick wall care putty on wall complete all as specified and as directed

M&L for preparation of old decorated surfaces including for peeling of old putty, scrubbing the surfaces to remove all the loose particles and applying 1 mm thick wall care putty,a coat of primer and applying two coats of oil bound distemper on walls complete all as specified and as directed.

M&L for preparation on old plastered surface of wall, chajja, parapet etc and appiying two coats of acrylic emulsion paint (two or more coat applied @1.67 ltr/10 sqm over including priming coat of exterior primer applied @ 2.20Kg/10 sqm ) inlcuding 3mm thick wall care putty on wall complete all as specified and as directed

M&L for preparation of old decorated surfaces and applying two coats of white wash on ceiling complete all as specified and as directed.

M&L for Hardcore of broken stone of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface all as specified and directed by Engineer -in-charge

M&L for 100mm thick Cement concrete type B- 2, 1:3:6 (40mm graded aggregate) as in sub base to pavement.

M&L for 50mm thick Sand filling under floors or in foundations including watering and consolidation all as directed.

M&L for laying of Machine pressed / rubber moulded precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade fixed with with grey cement and pigment

Providing and laying at or near ground level, factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

M&L Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 in for laying floor finishes all specified and directed ..

M&L Virified Ceramic tiles light shade 10 mm thick as in skirting (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat 1:3 all specified and directed.

S&F for non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured to match coloured tiles including dismantling of old tiles and cement mortar complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 300 X 600mm size of double charged or ultra charged set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick backing coat 1:3 including dismantling of old tiles and cement mortar all specified and directed.

Taking down wooden / aluminium window /vent shutter with frame (without taking off shutters from frame) of any description n.exc. 1.50 Sqm each etc complete all as specified and as directed .

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

Providing and fixing factory made uPVC white colour Sliding window Three track Area exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)

S&F for solar controlled film 50 micron reflective type sticked to glass as per instruction of manufaturers all as specified and directed

Supply only stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples etc complete all as specifed and directed

Taking down wooden/aluminium door shutter with frame (without taking off shutters from frame) of any description exc. 1.50 Sqm but not ecx 4.00 Sqm each complete all as specified and as directed .

S&F for 2nd class hard wood (SAL) plain, solid, straight chowkats and frame, wrought framed, rebated on the solid single or double rebate rounded or charmfered, put together with glue pinned at joints etc complete allas specified and as directed.

S&F for mild steel hold fast for doors etc complete allas specified and directed by Engr-in-Charge.

M&L for preparing surface of wood and wood based material, steel and iron work, new or old of any description and girth, not otherwise described, and trated with tar or coal tar black paint.

M&L for 40mm thick Flush shutters solid core construction with block board core and both faces is covered with decorative face veneer with lipping/ frame to match complete all as directed by Engr-in-Charge.

S&F 30 mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive glass and gauze etc but divided into squares with plain ,chamfered or rounded, metred and rebated sash bars any numbers as specified in SSR part I section 8 , clause 8.24 (a) to fitted to chowkhats.

S&F for 200mm long brass barrel tower bolts with cast or steel barrel and rolled or cast bolts and fixed complete all as specified and directed.

S&F for 150mm long brass barrel tower bolts with cast or steel barrel and rolled or cast bolts and fixed complete all as specified and directed.

S&F for 150mm size extruded brass handles fabricated type, polished etc complete all as specified and directed.

S&F for floor door stopper of brass body and tongue with hard drawn steel spring fixed in floor, overall length of cover plate 150mm complete all as specified and directed.

M&L for preparation of new wood surfaces of any description exc 10cm width or girth and applying two coats of synthethic enamel paint over a coat of pink primer etc complete all as specified and as directed.

S&F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour with particle board core PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F for Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S & F stainless steel butt hinges medium weight 75 mm size in any position all as specified and as directed.

S&F aluminium anodised barrel tower bolt of extruded section 200 mm long fixed in any position etc complete all as specified and as directed.

S&F extruded aluminium alloy handle fabricated type anodised 150 mm long fixed in any position etc complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300mm long and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedfixed in any position etc complete all as specified and as directed.

S&F in repairs standard size EWC white colour with P/S trap white coloured with and including PVC white coloured seat cover including all and connecting to flushing cistern complete all as specified and directed. (Cat part: S1053121 of Cera or equivalent)

S&F in repair vitreous china WHB flat back size 550x400 mm& supply only pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes including cutting for and pinning in ends of CI brackets and making good wall or floor fitting to match existing complete all as specified and as directed. (Cat part: S2020137 of Cera or equivalent)

S&F in repairs 10 ltr capacity low/high level PVC flushing cistern with and including syphon assembly handle, ball valve, PVC inlet and out let pipe complete all as specified and directed.

S&F repair fancy type chromium plated brass (long body) bib tap 15mm complete at any position etc complete all as specified and as directed.

S&F in repairs 15mm size Stop Valves chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends etc complete all as specified and as directed .

S&F in repairs Health Faucet with 1 meter CP flexible tube & hook and with all necessary fittings etc complete all as specified and directed. (Make: Prayag)

S&F in repair D type towel rail 600mm long PTMT fixed with and including chromium plated brass screwes and wooden/plastic cleats complete all as specified and directed.

Supply and fix in repair PVC seat cover for EWC white in colour, solid body, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed.

S&F in repairs brass chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe or union 15mm bore complete all specified and directed.

S&F in repairs bathroom shelf of PTMT fixing with and including chromium plated brass screws and wooden plastic cleats (minimum weight 300gms) to plastered/tiled walls etc complete all as specified. (Make: Prayag)

S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified.

S&F in repairs grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed.

S&F in repairs waste coupling 32mm brass chromium plated ISI for WHB/sink complete all as specified and directed .

S&F in repair white colour PVC drain pipe 32mm dia of High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete long socket waste pipe for wash basin / kitchen sink water outlet complete all as specified and directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

Taking down GI tubing and connection 15mm dia including cleaning of serviceable pipe for reuse and removal of unserviceable tube from work site all as directed.

S&F 15 mm dia bore medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed.

Taking up or down 20 mm bore dia Steel Tubing and connecions fixed to walls or laid in floors/ trenches etc complete all as specified and directed.

S&F 20mm dia bore medium grade galvanised steel tubing with all fittings fixed to walls, ceilings or laid under floors complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light,fan socket or power ) point complete,including fixtures and fittings such as switches, ceiling rose, pendents, regulators, sockets, tube light fitting,main switch,MCB and DB's etc complete all as specified and directed.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLSH type, ISI marked 1100 volts grade, single core multistranded copper conductor cable drawn through and including PVC conduit medium grade 20mm dia, ISI marked with conduit accessories concealed in wall/ceiling/roof/column/ beam etc. and with sunk pressed steel terminal boxes not less than 2mm thick and 50mm deep concealed in wall flush mounting and providing 3mm thick hylam laminated sheet top cover, ISI marked fixed by means of chromium plated scres and cup washers including 1.5 sqmm PVC insulated, unsheathed, FRLSH type, ISI marked, 1100 volts grade, single core multistranded copper conductor cable green in colour as continous earth wire connected one end to metalic body of luminaries/fan/sockets/ceiling rose and other end to common earth dilly complete all as specified and directed for one light point controlled by one switch.,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC casing and caping of size 20 mm width or above as required at site with all accessories such as Tee ,Corner, overlaping connector etc.along the suface of walls/roofs/ ceilings/floors etc including concealed PVC box for fixing of and including modular plate as per no of switch modules flush mounted suitable for fixing modular switches , sockets,fan regulators etc.including modular plate cover of required size with necessary stainless steel cadmium plated screws and including 1.5 Sqmm PVC insulated, multistranded, FRLSH type,unsheathed(Green colour),single core, copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and directed for the following:-

One light point / fan point controlled by one switch.

One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

One 5 pin 6 amps socket point controlled by one 6 amps switch on same board .

All as per item No.2 above, but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed for One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board.

Supply & fixing modular type switch 6 Amps ,1way,1 module.

Supply & fixing modular type switch 16 Amps ,1way,1 module .

Supply & fixing modular type socket 6 Amps, 2/3 Pin combined 2 module .

Supply & fixing modular type socket 6 A/16 Amps, 6 Pin combined 2 module.

Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body

Supply & fix Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply &fix modular type fan regulator stepped type 120 W- 2 module.

Taking down existing light fitting, of any type/make complete bipin holder,starter, connector etc and fixing back in existing or other place by providing PVC square box -02 Nos,tube rod and adequate length of three core flexible copper cable 0.75 sqmm from ceiling rose to fitting.

Supply and fixing LED lights fitting 1x 22W, 220V, 4' long AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make: Bajaj/Halonix/Crompton or equivalent

Supply and fix LED tube light (2 feet) along with fixture,10 watts,220V AC including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Bajaj/Halonix/Crompton or equivalent

Supply and fixing in repairs LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting and removing old unserviceable item complete all as specified and directed. Make: Bajaj/Halonix/Crompton or equivalent

Supply and fix in repairs GI bracket pipe of size 32 mm dia medium grade of 1.2 mtr long bent to shape hot or cold suitable for street light fitting and making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces. The bracket pipe shall be welded to the MS strip of size 32mmX 5mm thick at three places for purpose of giving strengthening to the bracket pipe and fixing with necessary suitable nuts,bolts & washers and removing of old unserviceable item complete all as specified and directed.

Taking down ceiling fan from its position for servicing, repairing, painting and refixing the same after repair and replacement of all unserviceable parts complete all as specified and directed.

Supply and fix in repair, factory made, SPN DB's, 08 way 240 volts, AC, double door, painted with epoxy based powder coated suitable for mounting MCB SP /DP and complete with and including 200 amps rated copper busbar, neutral bar,earth bar, connecting cable links with and including top and bottom removable gland plate, complete with IP 43 protection, all as specified and as directed. Make: Legrand/ IndoAsian/L&T or equivalent

Supply & fix for MCB SP 6 to 32 Amps 10 KA,"C" series complete all as specified and directed. Make: L&T/Legrand/Indo Asian or equivalent

Supply & fix MCB DP 32 Amps 10 KA,"C" series complete all as specified and directed. Make: L&T/Legrand/Indo Asian or equivalent

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sq. mm. 2 core etc compete all as specified and directed. Make: KEI/Polycab/Havells or equivalent

Excavation in trenches , not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in any type of soil complete all as specified and directed.

Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed

Removing excavated soil not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed

Supply and laying DWC pipe 50 mm (ID) all as specified and directed. Make: Astral/Finolex/Supreme or equivalent

Earthing complete with galvanised steel earth plate electrode 60×60cm.×6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.

Supply and fix exhaust fan, metal body AC single Phase. 230V of size 300m sweep with, blades, frame and louvers complete all as specified and directed. Make: Crompton/Bajaj/Havells or equivalent

SITC of water purifier RO+UV+TDS control wall mounted, 20 LPH, 60 watts, 100-230V AC ABS plastic body including fixing arrangement complete all as specified and directed. Make: Kent/Aquaguard/Ao smith or equivalent

SITC of water purifier RO+UV+TDS control wall mounted, 20 LPH, 60 watts, 100-230V AC ABS plastic body including fixing arrangement complete all as specified and directed. Make: Kent/Aquaguard/Ao smith or equivalent

Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp, GI bracket, clamp, nuts bolts ready to fix on pole all as specified and directed.

Supply and fix rigid non-metallic PVC conduit 25 mm dia medium grade including conduit accessories for encasing the cable from looping box to street light fittings on PCC poles/on wall surfaces as per site requirement with neccessary base saddles all as specified and directed.

Supply and fix copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade, 3 core ;2.5 sqmm and including connection and testing complete all as specified and directed.

Supply and install testing and commissioning of split type air conditioner 2 TR capacity of inverter technology 3 star rating with inbuilt air ionisor filter and plasma filter for better indoor air quality EER 3.2 with cordless remote control,single phase,240 volts complete with all accessories such as indoor and outdoor units and refrigerant tubing of adequate length as required at site, indoor mounting plate, duly powder coated fixingwith anchor bolts at any height,drain pipe of suitable size brought to ground level from any height, intial filling of refrigerant gas inculding making round hole on existing wall for taking up refrigerant tubing, drain pipe,cables etc and making good the disturbed surface by matching with existing adjoining surface complete all as specified and directed Make :- VOLTAS/BLUESTAR/DAIKIN or equivalent

Supply and fix Voltage stabilizer for automatic operation,single phase naturally air cooled indoor type ,Wall mounted type & designed for input variation between 170 V to 270 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 3800 VA suitable for 2 Ton AC . Make- V Guard VG 500 PLUS or equivalent.

Supply and fix factory fabricated mild steel stand set suitable for installation of out door unit of split type air conditioner fixing arrangement with anchoring bolts on wall surface at suitable height as per site condition complete all as specified and directed.

Supply and fix of metal clad plug and socket with MCB SP 20 Amps, 10KA C 'series,240 Volts complete all as specifies and directed. Make: Indo asian/Legrand/ Havells or equivalent

Supply and fix soft copper pipe/tube ASTM B68 outer diameter of 5/8 inch, wall thickness 0.6 to 1mm complete all as specified and directed.

Supply and fix soft copper pipe/tube ASTM B68 outer diameter of 1/4 inch, wall thickness 0.6 to 1mm complete all as specified and directed.

Supply and fix UPVC Pipe (SCH-40)of 50 mm in bore for AC water drain brought to ground level from any height including necessary fittings such as clamps, bends, joints complete all as specified and directed. Make: Supreme/ Finolex/Astral or equivalent

Material and labour for submain wiring along with earth wire using 2 X 4.0 sq mm(colour coading) + 1X4 sq mm earth wire(green colour) of single core PVC insulated multistranded copper conductor 1100 Volts grade FRLSH type in and including PVC conduit medium grade not less than 25 mm dia with all conduit accessories concealed in wall/ceiling/beams/column etc and making good the disturbed surface by matching with existing adjoining surface complete all as specified and directed. Make: KEI/Polycab/Finolex or equivalent

Taking down carefully copper/aluminium point wiring (light,fan socket or power) point complete,including fixtures and fittings such as switches, ceiling rose, pendents, regulators, sockets, tube light fitting,main switch etc complete all as specified and directed.

One fan point controlled by one switch with cable 1.5 Sqmm size

One 16A socket outlet , independent, with cables 2.5 sqmm size.

Supply & fixing modular type switch 6 Amps ,1way,1 module.

Supply & fixing modular type switch 16 Amps ,1way,1 module .

Supply & fixing modular type socket 6 A/16 Amps, 6 Pin combined 2 module.

Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body

Supply & fix for MCB SP 20 Amps 10 KA,"C" series complete all as specified and directed. Make: L&T/Legrand/Indo Asian or equivalent

S&F for Stainless steel connection pipe of water geyser, 304 stainless steel braided outer pipe and EPDM inner tube, 2 pieces of silica gel to prevent leakages, 450mm in length complete all as specified and directed.

Please Enable Macros to View BoQ information