REPAIR REPLACEMENT OF INTERNAL WIRING ELECTRICAL FITTINGS FIXTURES RENEWAL OF BLDG EARTHING CEILING FANS EXHAUST FANS GEYSERS SPLIT WINDOW TYPE AIR CONDITIONERS WATER COOLERS DEEP FREEZER AND ALLIED WORKS IN RO OTM MD ACCN DGQA AREA UNDE

Amount

Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, call bell socket or power circuits) complete and making good the disturbed surface of walls, ceiling etc incl painting with same colour of the back ground complete all as specified and as directed by Engineer-in-Charge.

Point wiring complete concealed with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit medium grade ISI marked incl accessories concelaed type wiring incl GI/ MS branded sunken boxes suitable for normal/modular concealed on walls including plastic/heylam laminated sheet top cover 3 mm thick/modular frame and cover of suitable module fixed with cadmium plated iron screws for housing modular/normal type switches, switch socket outlets, fan regulators etc., incl provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.for the following :- One light point controlled by one switch

All as per item No. 2 above but for One fan point controlled by one switch/regulator

All as per item No. 2 above but for One light point controlled by 2 way switch

All as per item No. 2 above but for One 3 pin socket out let 5 Amps on independent board

All as per item No. 2 above but for One bell / buzzer point controlled by bell push

All as per item No. 2 above but for One 3 pin socket out let 5 A on same board

All as per item No 2 but concealed wiring drawn through existing PVC conduit. One light point controlled by one switch

All as per item No. 8 above but for One fan/Exhaust point controlled by one switch/regulator

All as per item No. 8 above but for One light point controlled by 2 way switch

All as per item No. 8 above but for One 3 pin socket out let 5 Amps on independent board

All as per item No. 8 above but for One bell/buzzer point controlled by bell push

All as per item No. 8 above but for One 3 pin socket out let 5 A on same board

Point wiring complete with 2.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through non-metalic existing PVC conduit medium density ISI marked incl accessories surface type run on walls/ ceiling incl MS terminal boxes fabricated with 1.6 mm thick GI/MS sheet surface mounted/ concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.

Point wiring complete with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl PVC Casing & Caping ISI marked incl accessories surface type wiring incl 1.6 mm thick GI/MS sunken boxes concealed on walls including laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.for the following One light point controlled by one switch

All as per item No. 15 above but for One fan point controlled by one switch/regulator

All as per item No. 15 above but for One light point controlled by 2 way switch

All as per item No. 15 above but for One 3 pin socket out let 5 Amps on independent board

All as per item No. 15 above but for One bell/buzzer point controlled by bell push

All as per item No. 15 above but for One 3 pin socket out let 5 A on same board

Point wiring complete with 2.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl non-metalic PVC conduit medium density ISI marked incl accessories concealed type run on walls/ ceiling incl GI/MS terminal boxes fabricated with 1.6 mm thick MS sheet concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.

Point wiring complete with 2.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl PVC casing caping ISI marked incl incl accessories surface type wiring run on walls/ ceiling incl GI/MS terminal boxes fabricated with 1.6 mm thick MS sheet concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed. Note for Item No 2 to 22 :- (i) The earth wire for the points in the same circuit can be looped from point to point. (ii) Earth wire shall be taken inside the conduit. (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring. (iv) Cost of a circuit of any length of cable from DB to any switch/ socket board to be included in point wiring. (v) Cost of cutting chases for conduits and making good to walls, in case of recessed or concealed conduit wiring will be paid separately in other items.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth, all as specified and as directed.

S&F in repair LED batten suitable for indoor applications 20 Watts, 4 feet with extruded aluminium housing & integrated LED channel complete with all accessories including taking out old fittings all as specified and directed. Make: Bajaj, Cat No. BCLAB 20 W LED P or equivalent Makes & model

S&F in repair LED batten suitable for indoor applications 10 Watts, 2 feet with polycarbonate housing & integrated LED channel with white arcylic cover complete with all accessories including taking out old fittings all as specified and directed. Make: Bajaj, Cat No.BCLSB 10W WH or equivalent Makes & model

S&F in repair 2' x 2' Recess mounted LED Luminaire 36 Watts white powder coated CRCA housing with LEDs seamless front frame with flate white high transmission arcylic cover complete with all accessories all including taking out old fittings as specified and directed. Make: Bajaj, Cat No : BZRSQL 36L LED GX CW or equivalent Makes & model

S&F in repair 2' x 2' Surface mounted LED Luminaire 36 Watts white powder coated CRCA housing with LEDs seamless front frame with flate white high transmission arcylic cover complete with all accessories all including taking out old fittings as specified and directed. Make: Bajaj, Cat No : BZSSQL 36L LED WH GX MT or equivalent Makes & model

Supply and fix in repair Slim surface mounted round LED down lighter of 12 watt aluminium die cast body with premium diffuser to ensure glare free & even distribution of light.Make & Model No:BGSLO SLEEK SURFACE 18 W WH RD LED of BAJAJ or equivalent

Supply and Fix in repair Modular switch 1 way 6A,1 module

Supply and fix in repair Modular switch 1 way 16A, 1 module

Supply and fix in repair Modular switch 2 way 6A,1 module

Supply and Fix in repair Modular Bell push 6A 1 module

Supply and fix in repair modular Socket, 6A - 2/3 pin combined 2 module

Supply and fix in repair modular Socket 6A/16A - 2/3 pin combined 2 module,

Supply and fix in repair modular type Fan step regulator, 120W - 2 module

S&Fin repair of of Switch piano flush button single pole two way 5 Amps all as specified and as directed.

S&F in repair of Angle holder PVC / polycarbonate type all as specified and as directed

S&Fin repair of switch piano flush type single pole one way 5 Amps

S&Fin repair of switch socket combination 5 pin 2 in 1, 5 A Flush type all as specified and as directed

S&F in repair of switch socket combination 2 in 1, 3 pin 5 and 15 Amps flush type universal all as specified and as directed

S&F in repair of bell push flush type 5A all as specified and as directed .

S&Fin repair of MCB SPN 240 volts 32/40 Amps complete all as specified and as directed

S&F in repair of MCB single pole 240 volts 10/16/20/32 Amps complete all as specified and as directed

S&F in repair of MCB TPN 415 volts, 10KA 'C' curve 63 Amps complete all as specified and as directed

S&F in repair of MCB TPN 415 volts, 10KA 'C' curve 100 Amps complete all as specified and as directed

Taking down unserviceable sheet metal enclosure/ DB, supply and fix, MCB DB SPN 4 way (Horizontal), double door with Sheet metal enclosure, flush mounted, prewired, 240 V, AC, 50 Hz, Factory made, powder coated, IP-42 protection conforming to IS-13032 universal mounting with 200 Amps rated copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides, etc complete all as specified and as directed. Notes : i) All unused modules shall be provided with blanking plate for which the cost is deemed to be included in the cost of MCB DBs. ii) MCB/ Isolators will be measured and paid separately as supply and fix under respective items.

All as per Serial Item No 46 here-in-above, but SPN 8 ways

All as per Serial Item No 46 here-in-above, but TPN 4 ways, 415 V

S&F in repair of ceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals all as specified and as directed

S&Fin repair of stepped type electronic fan regulator flush Switch/socket type all as specified and as directed

S&Fin repair of Ding Dong bell AC 230 volts single pole.

Provision of new sub main wiring 1100 volts grade multistranded FRLS copper conductors, two runs of single core 6 Sqmm along with 6 Sqm PVC insulated single core multistranded copper conductor cable as earth continuity conductor run along with PVC conduit including taking down existing unsv submain complete all as specified and as directed. Note: 3 runs of cable and one run of conduit will be measured as unit length for payment.

Provision of new sub main wiring 1100 volts grade multistranded FRLS copper conductors, two runs of single core 4 Sqmm along with 4 Sqm PVC insulated single core multistranded copper conductor cable as earth continuity conductor run along with PVC conduit including taking down existing unsv submain complete all as specified and as directed. Note: 3 runs of cable and one run of conduit will be measured as unit length for payment.

Provision of new sub main wiring 1100 volts grade multistranded FRLS copper conductors, two runs of single core 2.5 Sqmm along with 2.5 Sqm PVC insulated single core multistranded copper conductor cable as earth continuity conductor run along with PVC conduit including taking down existing unsv submain complete all as specified and as directed. Note: 3 runs of cable and one run of conduit will be measured as unit length for payment.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe wire mesh and lugs, incl test point complete all as specified and as directed including dismantaling and taking down old Earthing plates.

Supply and fixing in repair 30 W LED bldg security light fitting with pressure die cast housing along with prismatic polycarbonate difuser with IP 66 protection including taking out old fittings. Make:- Bajaj, Cat No.:- ENXT P 30L WH PO PC SD or Equivalent Makes & model

S&Fin repair of Bracket made out of GI tubing medium grade 25 mm bore , approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm , nuts, bolts, washers etc and including before fixing applying two coats of aluminum paint over a coat of red oxide primer including removing the old existing GI bracket from bldg complete all as specified and directed.

Excavation in trenches in hard/dense soil not exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying of cables on trenchs etc complete all as specified and as directed.

Returning, filling in trenches incl spreading leveling watering and well ramming in layers with hard/dense soil not exc 25 cm thick in each layer complete as specified and as directed

Removing excavated surplus soil to a distance not exc 50m and depositing at location not exc 1.5 mtr above the starting point complete all as specified and as directed

M & L for sand cushioning with a layer of M sand 23 cm thick under and above the cable complete all as specified and as directed. Note: Punned thickness will be measured for payment.

S & L sub class burnt bricks for cable protection complete as specified as directed

S&L cable XLPE insulated screened PVC bedded galvanised steel strip or wire armored, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor connected with suitable legs including neccessary roadcrossing if applicable and taking out the existing unserviceable cable for following size :- 4 C x 16 Sqmm

All as per item No. 63 above but for 4 C x 25 Sqmm

S&F in repairs GI tubing light grade 40mm dia with all accessories for cable protection fixed on poles / bldgs / road and laid in trenches incl necessary MS clamps, bolts and nuts etc all as specified and as directed.

S&F in repair Bulk Head Fitting suitable for indoor application of 10 watt, including electrical connecion from ceiling rose with 3 core 1.5 sqmm sheathed wire all as directed. Make & Model No: Bajaj Cat part No: BIBWP 10W LED or its techno commerical equivalent make specified in CA.

S&F in repair Decorative wall light fixture made up of polycabonate suitable for indoor application of 9 watt LED lamp B22 base, including electrical connecion from ceiling rose with 3 core 1.5 sqmm sheathed wire all as directed. Make & Model No: Havells & Model : Globe or its techno commerical equivalent make specified in CA.

S&F in repair LED Bulb suitable for indoor application of 9 watt, to fit in Angle Holder or Decorative wall light fixture all as directed. Make & Model No: Havells Cat part No: ADORE LED PLUS 9 W or its techno commerical equivalent make specified in CA.

Taking down ceiling fan 1200mm/1400mm and wall mounted fan 300/450 mm sweep from position by duly disconnecting electric lines, preparing the surfaces, filling cavities with filler, after cleaning all dust, spray painting with one finishing coat of synthetic enamel paint including writing MES NO and replacing the split pin, rubber pully etc., including refixing and connecting the same complete all as specified and as directed.

Inspection, disconnecting electric connecting and dismantling of ceiling fan/exhaust/wall mounted fan of any type/size, cleaning including oiling and greasing the bearing, tighting of nuts and bolts and refixing on the old place complete after necessary repair/replacement of old parts all as specified & as directed. Note : Replacement of old parts shall be measured & paid separately.

Supply only ball bearing of various sizes / make as required for ceiling fans / wall mounting / exhaust fan including greasing complete all as specified and as directed.

Supply only Gun metal bush of any size / make suitable for ceiling fans all as specified and as directed.

Supply only capacitor 2.5 Mfd suitable for ceiling / exhaust / wall mounting fans complete all as specified and as directed.

Supply only capacitor 4.0 Mfd suitable for ceiling / exhaust / wall mounting fans complete all as specified and as directed.

PVC flexible cable twin twisted core of 23/0.0076 size multi stranded copper conductor suitable for connecting ceiling fans / exhaust /wall mounting fans complete all as specified and as directed.

Rubber bush with MS bolts, nuts & washers with 'U' clamps for ceiling fans complete all as specified and as directed.

Dismantling / opening the ceiling fan of 1200 mm sweep of any make and type, removing the old defective winding carefully, cleaning the inner parts and rewinding with the same gauge super enamelled copper conductor of good insulation, varnishing, drying and reassembling / re-fixing in its p complete all as specified and as directed.

Dismantling / opening the ceiling fan of 1400 mm sweep of any make and type, removing the old defective winding carefully, cleaning the inner parts and rewinding with the same gauge super enamelled copper conductor of good insulation, varnishing, drying and reassembling complete all as specified and as directed.

Dismantling /opening the wall mounted fan of 300 mm sweep of any make and type, removing the old defective winding carefully, cleaning the inner parts and rewinding with the same gauge super enamelled copper conductor of good insulation, varnishing, drying and reassembling complete all as specified and as directed.

Taking down exhaust fans 230 mm/300mm / 450mm sweep from position by duly disconnecting electric lines, preparing the surfaces, filling cavities with filler, after cleaning all dust, spray painting with one finishing coat of synthetic enamel paint including writing MES NO and replacing the split pin, rubber pully etc., including refixing and connecting the same complete all as specified and as directed.

Dismantling /opening the exhaust fan of 230 mm/300 mm sweep of any make and type, removing the old defective winding carefully, cleaning the inner parts and rewinding with the same gauge super enamelled copper conductor of good insulation, varnishing, drying and reassembling complete all as specified and as directed.

M&L extension of down rod for ceiling fan upto 1.5 mtr including nut, bolts , washers complete accessories all as specified and as directed.

Supply and fix refrigerators, electric driven (single phase), capacity 310 Litres. BEE 5 star rated. Make : LG/Whilpool/IFB.

Supply and fix voltage stabilizer suitable for water cooler 1 KVA complete all as specified and as directed. Make : V Guard / Everest / Sinotech

All as per item No. 84 above but for AC 1.5 Ton 4 KVA

All as per item No. 84 above but for AC 2 Ton 5 KVA

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 1.5 TON complete all as specified and as directed. Make - Blue Star/Voltas/LG.

S&F ceiling fans complete with complete accessories, 230V, SP 1200 mm Sweep with BEE 3 star rating complete with all accessories and fixing the fan from ceiling rose with 3 core flexible copper wire 24/0.20 sqmm, etc all as specified and as directed Make :- Havells/CG/ Bajaj.

S&F Exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louvers fixed outside with all accessories and fixing the exhaust fan from ceiling rose with 3 core flexible copper wire 24/0.20 sqmm, etc all as directed. Make : Bajaj cat No : 70046, MAXX AIR 300 mm or eqv in Make Havells/CGs/ Orient

S&F in replacement PVC Fresh air fan of 200mm sweep 1200/1400 RPM with louver. Make CG/Usha/ Orient/Phillips/Bajaj.

S&F in replacement PVC Fresh air fan of 150 mm sweep 1200/1400 RPM with louver. Make CG/Usha/ Orient/Phillips/Bajaj.

S&F in replacement of Single pole & neutral enclosure 20 Amps & 240 V with two pin and earth plug and socket complete with one single pole MCB 20 Amps.

Shiva Shakthi Electrical Enterprises (BID ID -3115375)

GS TRADERS (BID ID -3114350)

Vasavi Electricals (BID ID -3115854)

RAMSON TRADERS (BID ID -3127260)