PROVN OF TOILET BLOCK AT HQ PUP AND MP SA CAMP AND SPECIAL REPAIR TO OTM OF BLDG NO T-78 (OR LINE) AT SCE AT NEW CANTT ALLAHABAD

Amount

Demolition of cement concrete in ground floors and pavings not exc.15 cm thick (above or below ground level ) unreinforced.

M&L 30 mm thick PCC 1:2:4 type B-1 using 20 mm graded aggregates as in base of floor complete as all spfd and directed.

Dismantling stone slabs or tiles of any description or thickness in floors etc laid bedded & pointed in any mortar complete all as specified & as directed

M&L machine cut kota stone slab flooring 18-20 mm thick including 15 mm thick cement screed bed jointed with grey cement slurry mixed with pigment to match the shade of the slab inclung rubbing & polishing complete all as specified & directed.

M&L for rubbing & polishing of existing kota stone flooring complete all as specified & as directed

Dismantling of floor hearth or wall tling including cement mortar bedding (but not backing), removing servicesable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer of cement (1:4) complete as all spfd and directed by EIC

M&L for first or premium quality glazed ceramic designer tiles (minimum size 300x450x6 to 8 mm thick) coloured tiles on vertical surfaces as in skirting , dado etc set & jointed in neat cement slurry and pointed with white cement mixed with colour pigment to match the colour of tiles over 15 mm thick rendering in CM(1:4) on brick work or concrete surface on wall and finished the even and fair to receive tiles complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C-2 using 20 mm graded aggregates as in plinth protection and path and finishing even & fair without using extra cement complete as all spfd and directed.

M&L Cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation, sub base filling and mass concrete all as specified and directed.

M&L for 60 mm thick M-35 grade factory made vibratory compacted cement concrete rubber moulded interlocking paver block Coloured any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 30 mm thick sand cushion and joints filled with sand complete all as specified and directed.

M&L PCC type B-1 (1:2:4) using 20 mm graded stone aggregate as in coping and side packing of paver block complete as all spfd and directed.

Demolition of brickwork masonary built in lime or cement mortar including all quions arches ,pillars etc. but excluding concrete articles.

M&L Brick work with sub class 'B' bricks , straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified & as directed.

Taking down cement plaster/terrazzo/tiles etc on brick wall or stone wall etc, including raking out joints hacking for key, scrubbing down with water etc complete as well as spfd. and as directed .

M&L Rendering 15 mm thick in CM(1:6) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement complete as all spfd and directed.

M&L Rendering 15 mm thick in CM(1:4) on fair faces of brick work or concrete surfaces to be finished even & fair without using extra cement with WPC complete as all spfd and directed.(Note : WPC to be measured & paid seperately under appropriate item)

M&L for preparation of new plastered surface and applying two coat of Oil emulsion distemper over a coat of white cement based Birla/JK wall care putty over a coat of primer on wall complete as all spfd and directed by EIC

M&L for complete removal of existing treatment by scraping with metal plate, wire brush etc and applying two coat of Oil emulsion distemper over a coat of white cement based Birla/JK wall care putty over a coat of primer on wall complete as all spfd and directed by EIC

M&L for preparation of new plastered surface of wall and applying two coat of cement based paint white or tinted over a coat of primer complete all as specified and directed.

M&L for complete removal of existing tratment by scraping with metal plate, wire brush etc of wall and applying two coat of cement based paint white or tinted over a coat of primer complete all as specified and directed.

M&L for preparing old plastered decorated surfaces of wall and applying two coats of exterior emulsion paint (Apex/Weather coat) white or tinted as approved complete all as specified and directed.

Taking down chowkhats or frames with shutters(without taking off shutters from the frame) not exc. 1.5 sqm each complete as all spfd and directed.

Taking down chowkhats or frames with shutters(without taking off shutters from the frame) area exc.1.5 sqm each not exc. 4.00 sqm each complete as all spfd and directed.

S&F Rolled mild steel Framed work as in doors or gates hollow section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete GDE Fe410-0 or Fe 310-O

S&F 32 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as spfd and directed.

S&F 35 mm th second class HW glazed and skelton shutters open rebeted prepared to received glass,gauze, etc. (with sash bar) divided in squre with plain chamfered or rounded mitred rebeted sash bar any No for securing glass,gauze etc,size of members of shutters as specified in SSR part -1 section 8 clause 8.24 (a) fitted to chowkhats.

S&F Solid PVC Double door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet reinforced with M.S. tube, supplying & fixing in opening as per specification & drawing all as pecified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and with single side prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

S&F MS work such as holdfast ,staple,clamps,etc and similar small article etc conforming to Fe-290-0 grade -e-165 complete all as specified and directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete, all as specified and directed.

M&L for preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paints over and including a coat of pink primer all as specified and directd.

S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete as all spfd and directed.

S&F 100 mm butt hinges, medium weight, cold rolled mild steel, and fixed complete as all spfd and directed.

S&F 150 mm aluminium handles, cast type, anodised complete all asspecified and directed.

S&F 200 mm aluminium anodized, barrlel tower bolts of extruded section complete all as specifed and directed.

S&F 150 mm aluminium anodized, barrlel tower bolts of extruded section complete all as specifed and directed.

S&F 300 mm long aluminium anodized, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete.

S&F Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane

M&L for PCC 1:3:6 type C-1 (using 20 mm stone agg) as in fixing of holdfast including necessary form work and like , complete all specified and directed.

S&F Casement UPVC Window fabricated any size of wall thickness 1.2 mm +0.25 mm made out of extruded section plain UPVC Sections. The window Frame made out of Rigid UPVC Sections meter cut at 4 Corners & joint with plastic fusion welding with internal reinforce required. The shutter section made out of extruded Rigid UPVC with internal reinforced with provision of 5mm Glass as per requirement . The window shall be fixed to wall using 65 x 100 MM long MS fasterners at suitable place provided for each vertical and horizontal member etc. complete as per manufacturer's specification and direction of Engineer - In- Charge.

S&F Casement UPVC Window fabricated any size of wall thickness 1.2 mm +0.25 mm made out of extruded section plain UPVC Sections. The window Frame made out of Rigid UPVC Sections meter cut at 4 Corners & joint with plastic fusion welding with internal reinforce required. The shutter section made out of extruded Rigid UPVC with internal reinforced with provision of Stainless steel wire mesh0.36 mm nominal dia & average widh of aperture 1.40 mm as per requirement . The window shall be fixed to wall using 65 x 100 MM long MS fasterners at suitable place provided for each vertical and horizontal member etc. complete as per manufacturer's specification and direction of Engineer - In- Charge.

S&F framed works such as gaurd bars etc similar works conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F Steel ventilators with top hung shutter including hinges,steel peg stay, complete

S&F in repairs Vitreous China WHB ,white flat back,size 550x400 mm excluding taps,waste,chain & plug and porcelain stopper but including brackets complete all as specified & directed.

S&F waste fittings 32 mm brass chromium plated for WHB with long screwed shanks and fly nuts ,flange end bedded in red lead cement and other end fixed complete all as specified & directed.

S&F in repair Pillar tap 15 mm bore cast copper alloy with capstan heads chromium plated screwed down high pressure with or without letered Hot or Cold with long screwed shanks and flynuts screwed for iron pipes complete all as specified & directed.

Taking up or down 15 mm bore dia. GI steel tubing and connection including cleaning for re-fixing or removing ot store.

Taking up or down 20 mm bore dia. GI steel tubing and connection including cleaning for re-fixing or removing ot store.

Refixing old steel tubing and connections in new or old position (wall,ceilling,floor etc) bore of pipe 15 mm.

Refixing old steel tubing and connections in new or old position (wall,ceilling,floor etc) bore of pipe 20 mm.

S&F GI tubing medium grade 15 mm bore with all fitting & fixed to wall & ceiling or laid in floors complete.

S&F GI tubing medium grade 20 mm bore with all fitting & fixed to wall & ceiling or laid in floors complete.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) including 'P' or "S" trap and including water closet seat cover complete.

S&F in repairs PVC valveless symphonic action type flushin cistern low level white inlet, ball valves float valves & handle including brackets of 10 litre capacity including down take pipe and making good disturbed portion in CM(1:4) complete.

S&F in repairs 1000 ltr capacity of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position and including dismantling water tanks all as specified in SSR part-I.

S&F in repair 20 mm bore Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed.(Minimum weight 20 mm-210 gms) complete.

S&F in repairs 15 mm bore Stop valves fancy type , chromium plated with long shank and cup (concealed type) , cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete as all spfd.

S&F in repairs Brass CP shower rose 125mm size

S&F in repair 75 mm bore PVC(SWR) floor trap, plain with grating including jointing with solvent cment complete as all specified and directed

S&F in repair Two way angle valve bore 15 mm complete all as specified and directed. Make:- L&K Cat No:- 0327 or equivalent as specified & as directed.

S&F repair Hand shower (health faucet) with 1 metre long PVC tube & wall hook complete all as sp[ecified & directed.Make:- Jaquar Cat No - ALD-BLK-583 or equivalent.

S&F in repair angle valve 15 mm bore complete all as specified & directed. Make L & K Cat No 0077A or equivalent

S&F in repair soap dish holder complete all as specified & directed. Make Jaquar Cat No CAN 1131 N or equivalent

S&F in repair Tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified & directed.

S&F in repair Towel ring square with round flange complete all as specified & directed.Make Jaquar Cat No CAN 1121 N or equivalent.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard & railing 60 cm long complete all as specified 7 directed.

S&F in repair PTMT grating doom 100 mm dia (with or without waste hole) completle4 all as specified and directed.

S&F in repair PVC connnection 15mm sizae with PTMT nuts of length 450mm long complete all as specified and directed.

S&F in repairs 15 mm dia bore Bib taps fancy type chromium plated screwed down screwed for iron pipe or for brass ferrule complete all as specified & directed.

Demolition and breaking up drain pipes 100/75 mm dia (sat glazed ware, AC or reinforced concrete) set in cement mortar complete and directed

S&F 110 mm bore PVC(SWR) Pipes single socketed, in any length with rubber ring joints, fixed to walls complete as all spfd and directed by EIC.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors

S&F 75 mm bore PVC(SWR) Pipes single socketed, in any length with rubber ring joints, fixed to walls complete as all spfd and directed by EIC.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors

S&F 110 mm bore PVC(SWR) bends any radius.

S&F 75 mm bore PVC(SWR) bends any radius.

S&F 110 mm bor e PVC(SWR) branch pieces, single equal or unequal complete as all spfd and directed by EIC.

S&F 75 mm bore PVC(SWR) branch pieces, single equal or unequal complete as all spfd and directed by EIC.

S & F stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing end of stays to wall or roof for 100 mm bore of pipe complete all as directed

S & F stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing end of stays to wall or roof for 75 mm bore of pipe complete all as directed

Dismantling of AC Corrugated/semi corrugated or translucent sheet as in roof coverings complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L PCC (1:2:4) Type B-1 using 20 mm graded stone aggregate as in coping , roof kerbs or mud stops, packing in side of AC sheet toched to wall, rounded or chamfered on edges complete as all spfd and directed by EIC.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete as all sfd and directed.

S&F Steel work in tubular sections etc including special shaped washer etc. complete using ERW or induction butt welded conforming to I.S.complete all as specified & directed .

M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete as all spfd and directed by EIC

M&L preparation of old painted steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete as all spfd and directed by EIC

S&F in repairs 4mm thick Non asbestos fibre cement building board fixed or laid /inserted to GI framework powder coated (Main Tee 32x24x0.30mm ,Cross Tee 26x24x0.30mm) hanged with GI wire to roof complete all as specified and directed.

Cleaning the roof surface from dust / dirt and any other foreign materials and primer applying a coat of bituminious primer @ 0.40 liters per square meter uniformily after the surfaces fully dried complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar (1:3 ) with Liquid water proofing over concrete surfaces of roof, as per manufacturers instruction complete all as specified and directed.

M&L for APP based polymeric water proofing membrane minimum weight 3 Kg / Sqm and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/Sqm or as per IS), laid over hot bitumen surface by torched application . Membrane shall be laid with 100mm side and 150 end overlap ,sealing all overlap after side complete including treatment at all junctions and corner at least . the membrance shall be tucked into groove on vertical plane and groove sealed with cement mortar. the treatment shall be provided upto 200 mm height or as directed Complete all as specified & as directed.

M&L for 40 mm th brick tiles laid over incl 20 mm thick screed bed in cement using water proofing compound, jointed and pointed in cement sand mortar 1:4 with WPC by wts of cement . The Joints shall be filled with CM(1:3) mixed with crude oil as SSR-2009 (part) After laying the brick tiles the work shall be cured with water by ponding complete all as specified and directed.

Surface dressing n.exc 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches n. exc 1.5 m width and n. exc 1.5 m in depth for foundation etc or for shafts, wells,cesspits , manholes , pier holes etc n exc 10 sqm on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and as directed.

Rough excavation n exc 1.5m deep and getting out soft/loose soil and the soil should be free from roots and other vegitations complete all as specified and directed.

Returning filling in ,including spreading ,levelling,watering and well ramming in layers n exc 25 cm soft/ loose soil complete all as specified and as directed.

Removing excavated material exc 250 m but n exc 500 m distance and depositing as directed.

Spreading and levelling of soil in layers n exc. 25 cm thick with well ramming including watering as required for filling under floor complete all as specified.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed .

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and as directed

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in lintal band at any height complete all as specified and as directed

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in slabs supported on walls, roof beams etc and the like, complete all as specified and directed.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in chajjas, shelves etc and the like, complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed

Formwork to sides of pillars, posts, struts, piers, columns and stanchions with rough finished surface complete all as specified and as directed

Form work to sides and soffit of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc rough finished complete all as specified and as directed

Form work to soffits of suspended slabs such as roof slab etc. n.exc. 200mm thick for fair finished surfaces of concrete complete all as specified and directed.

Form work to chullah hood, chajjas, troughs and similar items including edges complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed

S&F TMT bars of 10mm dia and over in reinforcement cut to length bent to shape required including cranking bending and binding with mild steel annealed wire not less than 0.90 mm dia or securing with clips and as straight in groves complete all as specified and directed.

M&L for Mild steel bars (TMT bars) 5mm dia and over upto and including 10mm dia in strriups,spaces,nibs and binders complete all as specified and as directed.

M&L for half brick thick wall fly ash bricks (old size), straight or curved on plan to any radius, built in cement mortar 1:4 complete all as specified and as directed

M&L for 5 mm thick rendering in CM 1:3 on ceiling surface plaster complete all as specified and as directed.

Preparation of newly plastered surface of ceiling and applying two coats of white wash complete all as specified.

Preparation of newaly plaster surface of wall and applying three coats of white wash complete all as specified and directed.

M&L for hardcore of gauge n exc. 63 mm,of broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 10mm thick plaster in CM 1:3, mixed with water proofing compound when concrete is green,finished even and smooth without using extra cement complete all as specified and directed. (Note:- Liquid water proofing compound to be measured and paid separately)

Supply only Liquid water proofing compound (ISI marked) complete all as spesified and directed.

M&L for water proofing treatment to roof and edges (vertical or tapered) etc. in following sequence:- (a) Properly cleaning and drying the surface. (b) Applying a coat of bituminous primer @ 0.40 ltr / Sqm conforming to IS 3384-1986 and primer shall be allowed to dry over night. (c) Laying of 3mm thick APP membrane of (non-woven polyester type) (weight not less than 3 kg per sqm) shall be done using butane torch maintaining 100mm ie overlap and 150mm end overlap,sealing all overlaps and bonded to the surface by fusing and bonding torchon method complete all as specified and directed. (Note: All water proofing work shall be done as per manufacturer instruction and under supervision of manufacturer technical representative.)

M & L for non skid joint free coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for glazed ceramic coloured wall tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified and directed.

S&F factory made solid PVC door frame of size 50 mm x 95 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed.

S&F factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick with partical board core (stile:), with 2,4 or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front Face & 2 mm Plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 complete all as specified and as directed.

S&F for WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including 'P' or 'S' trap complete all as specified and directed.

S & F vitreous China white wash down water closet pan (pedestal pattern) including fixing bolts,plastic water closet white seat cover clossed pattern with flat bottom (white colour) and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F flushing jet spray for pedestal pattern EWC including 1.00 m long flexible pipe and brass chromium plated nuts complete all as specified and directed.

S&F for PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float & handle, waste pipe & brackets complete set all as specified and directed.

S&F vitreous china Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including 32mm dia CP coupling, CP urinal spredar with CP pipe up to angle cock, waste pipe etc with all fixing arrangement and pointing around urinal back complete all as specified and directed.

S&F for vitreous china wash and basin,(under counter type) white, flat back, size 550 mm x 400 mm fixed on MS bracket including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, waste fitting,pipe and union complete all as specified and directed.

S&F 15mm bore CP pillar tap (fancy type) cast copper alloy,with capstan heads, chromium plated, screwed down, high pressure with long shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

M&L for 18 to 20 mm thick Granite work (table rubbed and polished) as in vertival surface on wall, column or similar works in 12 mm thick cement mortar (1:3) backing plaster including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

M&L for 1000 ltr rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified.

S&F for 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms)

S&F for 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F 15mm bore CP bib taps (fancy type) with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified and directed.

S&F 15mm bore CP angle stop valve (fancy type) of screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified and directed..

S&F 15 mm bore CP fancy stop valve (concealed type) with long shanks and cup fixed with pipes complete all as specified and directed.

S & F 600 mm long tubular towel rail , brass chromium plated of 20 mm dia complete all as specified and directed.

S & F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified.

S & F 110 mm outlet dia PVC (SWR) floor trap plain with grating including jointing with solvent cement. Complete.

S & F 110 mm bore PVC (SWR) vent cowl complete all as specified.

M & Lfor Salt glazed stoneware drain pipe Grade 'A' 150 mm bore laid in trenches and jointed complete all as specified and directed.

Material and Labour for PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in bed drain pipes of 150 mm bore including packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified and directed.

Cutting holes into existing manhole brick wall manhole built in CM, connection new drains making good to pipes and rendering cuttting out existing benching for and forming branch channel ( 1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 smooth finished and reforming benching as required for intenal dia of pipe 150mm.

M & L for vitrified pavement outdoor tiles of 300 mmX300mmX10mm thick coloured for floor/pavement etc and jointed in solvent and pointed in coloured cement to match the tilesover and including 15mm thick screed bed or bedding layer i.e CM (1:6) complete all as specified and directed.

M&L for point wiring (concealed type) complete with FRLS PVC insulated, unsheathed stranded copper conductor of nominal area 1.5 Sqmm( 22/0.30 or 30/0.25), 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly in and including cutting/chasing on brick wall not exc. 10 cm girth (excluding ceiling surface) and supply and fixing PVC conduit pipe medium grade of nominal size 20 mm dia along with connected fittings/junction boxes using new MS sunk terminal boxes of thickness not less 1.22 mm, new 3 mm thick laminated sheet cover with brass screw and cup washers with all accessories and making good to disturbed surface with cement mortar ratio of 1:3 and treated surface with existing white/colour wash/distemper etc to match with existing surface complete all as specified and directed and suitable for the following: - i) One light point or one fan point controlled by one, 1- way switch i) One light point or one fan point controlled by one, 1- way switch

(ii) One 3/5 pin socket outlet, 6 Amp on the same board with other switches

(iii) One 3/5 pin socket outlet, 6 Amp on “independent board”

(iv) One 3 pin socket outlet, 6 Amp on “independent board” but below the switch board of the light point in same vertical plane. Note : Socket Outlet point provided beside to switch board on same wall will be measured as below the switch board

All as per item No. 152 here in before but point wiring using 2.5 sq mm or 36/0.30 or 80/0.20 or 50/0.25 (Nominal area) FRLS PVC insulated unsheathed copper conductor 1100 volts for one 3/6 pin socket outlet ,suitable for 16 amps “ independent board”.

Supply & fixing ISI marked switch piano flush button type, single pole, one way, 6 Amps, 240 volts for point wiring complete all as specified and directed .

Supply & fixing socket out let 6 pin, 6 Amps flush type for point wiring complete all as specified and directed .

Supply & fixing ceiling rose 3 pin/PVC/ polycarbonate, isolated body with colour ring for fan point wiring all as specified and directed .

Supply & fixing batten/angle holder with colour ring for light point complete all as specified and directed .

Supply & Fixing switch socket combination multipurpose 2 in 1, 6 pin, 6 and 16 Amp, and flush type universal for point wiring and for point wiring and for replacement of existing worn out complete all as specified and directed .

Supply & fixing exhaust fan of size 300 mm sweep, plastic body, nominal wattage -50 Watt (± 5 %) , speed - 250 to 320 RPM, Air dilivery - 210 to 225 Cu Mtr/Min including accessories complete suitable for operating voltage 230 Volt AC connecting with FR PVC insulated & PVC sheathed round flexible copper conductor wire of size not less than 23/0.0076 in three core of length not more than 0.5 Mtr as specified and directed. Make - Havells/Crampton/Orient or its equivalent as specified and directed.

M&L for replacement of sub main wiring of following sizes with FRLS PVC insulated unsheathed flexible copper conductor wire (Multistrands), single core , 1100 Volts grade along with FRLS PVC insulated unsheathed flexible copper conductor (Multistrands) in green colour as continuous earth wire conforming to IS 694 with latest amendments and ISI marked, drawing in recessed/surface PVC conduct and making incoming / outgoing electric connections by using required size copper lugs / thimbles, making good to disturbed surface to match with existing including removal of existing old complete in all respect as specified and directed. Note :- 1. PVC conduit with fitting & cutting/chasing on wall shall be measured and paid seperately. 2. Four/Two run of single core cable with one run of contineous earth wire of copper conductor flexible wire(multistrand) shall be measured and paid as one unit length. (A) 2 x 4.0 Sqmm + 1 x 4.0 Sqmm earth wire

(B) 4 x 10.0 Sqmm + 1 x 10.0 Sqmm earth wire

(C) 2 x 6.0 Sqmm + 1 x 6.0 Sqmm earth wire

Supply & fixing in replacement of worn out/old linear fluorescent tube of 36 watt with energy efficient/saving retrofit MASTER LED tube with fitting of nominal wattage - 18 Watt, Lumen out put - 2100 Lm, Colour Temperature - 6500 Kelvin, Size & Length - G13/ T8/ 4 Feet, Operating Voltage - 140 to 280 Volt AC, THD - 15 %, with integral/in built driver, having short circuit and surge protection including minor addition/ alteration in existing circuit as required complete all as specified and directed. Make - Philips/Wipro/Havells or as approved

Supply & fixing energy efficient LED light of 10 Watt of length - 02 Feet long having minimum 1150 Lumen output, wide voltage protection range 140-270 Volt AC housed in extruded aluminum housing (enhances safety) with high quality polycarbonate diffuser including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. Product Code -BN 021 LED10S- 6500 PSU GR S1 of make Philips or its equivalent model in Wipro/Havells/CG or as approved

Supply, fixing, connecting & testing energy efficient LED Bulkhead in high pressure die cast aluminium housing of system wattage - 10 Watt, lumen out put - 600 Lm, colour Temp - Cool White having Ingress protection - IP 66 complete all as specified and directed. Cat No- WT140W LED7S CW PSU S1 PC or its equivalent in Havells or as approved

M&L for earthing as per IS:3043 with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe medium grade 15 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal /coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with a cast Iron hinged cover resting over the cast iron frame painted with black bitumastic paint which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply compete all as specified as shown in electrical plate no. 3 of SSR Part-I and testing of earth resistance as required.

Taking down carefully existing old/worn out point wiring with PVC conduit (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc including making good to the disturbed surfaces of walls complete all as specified and directed.

Supply & fixing ISI Marked switch piano flush button type, single pole, one way, 6 Amps, 240 volts for point wiring and for replacement of existing worn out complete all as specified and directed .

Supply & fixing socket out let 6 pin, 6 Amps flush type for point wiring and for replacement of existing worn out complete all as specified and directed.

Supply & Fixing switch socket combination multipurpose 2 in 1, 6 pin, 6 and 16 Amp, and flush type universal for point wiring and for replacement of existing worn out complete all as specified and directed.

Supply & fixing ceiling rose 3 pin/PVC/ polycarbonate, isolated body with colour ring for fan point wiring and for replacement existing worn out complete all as specified and directed .

Supply & fixing batten/angle holder with colour ring for point wiring and for light point wiring and for replacement of existing worn out complete all as specified and directed .

Supply & Fixing ISI Marked, medium step type fan regulator 80 Watt, 240 Volt AC for fan point wiring and for replacement of existing worn out complete all as specified and directed.

Supply & fixing surface & wall mounted light fitting in CRCA powder coated white housing complete with prewired suitable for ONE T8 LED tube along with supply and fixing two number LED tube in polycarbonate housing of nominal wattage - 18 Watt, Lumen out put - 2100 Lm, Colour Temp - 6500 Kelvin, Size & Length - G13/ T8/ 4 Feet with integral/in built driver, having short circuit and surge protection including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. Make - Philips/Havells or as approved

Cutting & Chasing required on on brick wall, exceeding 20 CM girth and making good to disturbed surface with cement mortar 1:3 including facing / finishing where as required to match with existing surfaces to recess the MCB DB/sheet steel enclousure complete all as specified and directed.

Cutting & chasing required not exceeding 10 CM girth for concealed conduit wiring and for GI earth wire including making good to disturbed surface with cement mortar 1:3 and distemper / colour wash to match with existing surfaces including facing / finishing where as required complete in all respect as specified and directed.

All as per Sr Item No 180 here-in-above but exceeding 10 cm but not exceeding 20 cm girth

Supplied and fixing Non Metallic Rigid PVC conduit, ISI Marked, coforming to IS 9537 Part III, medium grade including all fittings like bends, elbow reducer, junction boxes, tee bell mouth all fixing accessories such as coupler lock, nuts, saddles pipe hooks etc for concealed surface of wall complete in all respect as specified. (a) 25 mm nominal dia

(b) 20 mm nominal dia

Supply & fixing in replacement of existing worn out DB with triple phase & neutral MCB Distribution Box of 4 Way, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar confirming to IS 13032 & 8623 complete all as specified and directed.

Supply & fixing in replacement of existing worn out DB with single phase & neutral MCB Distribution Box of 8 Way, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar confirming to IS 13032 & 8623 complete all as specified and directed.

Supply & fixing in replacement of MS terminal box fixed for geyser/AC by sheet steel enclosure in single pole and neutral fitted with two pin and earth plug and socket of current rating 20 amps complete with fixing one single pole MCB , 'C' series of current rating 25 amp including cutting, chasing in wall to recess the same and making good complete all as specified and directed.

Supply & fixing in replacement of MCB Three pole, 50/63 Amps 240 volts AC , 'C' Series, conforming to IS 8828/IEC 60898-1 including making connections with copper lugs, testing as required complete all as specified and directed.

Supply & fixing in replacement of MCB double pole, 40 Amps 240 volts AC , 'C' Series, conforming to IS 8828/IEC 60898-1 including making connections with copper lugs, testing as required complete all as specified and directed.

Supply & fixing in replacement of worn out MCB with MCB SP, 06 to 32 Amps 240 volts, 'C' Series, ISI marked and conforming to IS 8828/IEC 60898-1 including making connections with copper lugs, testing as required complete all as specified and directed.

Dismantling & taking down the existing Ceiling /exhaust fan sweep and refixing the same after cleaning and minor repair to location as directed

Supply, fixing, connecting, & testing LED streetlight fitting of 32/36 Watt high pressure die cast aluminium housing, with minimum 120 lumen/watt system efficacy, covered potted designed driver of same make as fitting, heat resistant toughened glass with silicon gasket for IP-66 protection, better optics for uniform distribution roadway luminaires complete and fixing on existing bracket of steel tubular pole and connecting the fitting electrically using 3 way 10 amp connector and s&f PVC conduit 20 mm &pvc copper cable 2.5 sqmm 3core from junction pole box to fitting complete all as specified and directed. Make- Philips/havells/ Syska LED or as approved.

Supply & fixing street light bracket made out 32 mm dia bore G.I pipe, light grade of length not less than 1.2 Mtr, bend to required shape with Clamps, nut & bolts for supporting the brackets.

Supply and laying light grade galvanised iron pipe 15 mm bore dia size confirming to IS 1239-Part I, laid under the hard standing or through wall for protection of GI wire

Channa Brothers and Co.

KAPIL AWASTHI THEKEDAR

YASH ENTERPRISES

Siddhi Constructionn

Technological Associates

DINESH ELECTRICALS