Installation of 1 No, Highmast Light (12.50 mtr.) at Burdwan-I Krishak Bazar under Purba Bardhaman Zilla RMC, Dist.- Purba Bardhaman.

Connecting the equipments to early busbar incl. S&F No. 8 SWG G.I. wire on wall /floor with stapels as per G.S.

Excavation of soil for installation of Earth Electrode and filling & ramming for soft Soil.

Earthing with 50mm dia G.I. pipe (TATA-M) 3.64mm thick * 3.04 Mtrs. Long and 1*4 WG wire (4 Mtr. Long) 13mm dia * 80mm long G.I. bolts double washers incl. S&F dia pipe protection (1Mtr long) to be filled with bitumen partly under the G.L. and partly above G.L. driven to an average depth of 3.65Mtrs .below the G.L. and restoring the surface duly remmed

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Supply, Erection,Testing and Commissioning of 12.5 mtr High mast Poles with following dimentions- Dimension : Bottom Dia : 340 mm, Top dia: 150 mm, Section-2 (Section Length 6500 mm each),Thickness- 3 mm , Base Plate Size : 540X20 mm . PCD : 440 mm, Foundation Bolts : M24 x 750 mm x 8 nos, Winch SS Rope. Make : Approved by EIC.

Supplying & installation of Feeder Pillar to be fixed at the base foundation of High Mast with 50X50X6 mm angle iron leg of 1 mtr. having following specification . 1.Incomer: 63A TPN SFU 2.Supplying & fixing 415V sheet metal (16 SWG) Iron Clad 100 A Busbar chambers on angle iron frame on wall with 4 bar 4X20X5 mm Al bus-bar (85 mm long) , incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991 3.40A 4 Pole contactor. (2 NO+2 NC) (Make-Schneider/equivalent) 4.Bypass togle switch- 1 no 5. 24 hours single dial timer. (make- L&T)- 1 NO 6. 240V 20A SPMCB (make: Legrand or equivalent)- 15 Nos. 7.Phase Indicator- 3 nos,240 V CT ( turn ratio - 100/5 A)-1 ,8. Digital Voltmeter- 1 No, 9.Digital Ammeter- 1 No

Foundation of High Mast pole.

Supply of 1.1 KV grade PVC/XLPE 4 core 10 sq. mm Al armoured cable.(Trailing Cable) and Feeder Pillar To Pole

Supplying and fixing 4 core 10 sq. mm compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables

Finishing the end of 4 core 10 sq. mm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials

Supply of 150 watt PLUTO NEO LED floodlight made up of pressure die cast aluminum housing with toughened glass and high power LEDs and secondary lenses with IP66 protection. System efficacy ≥ 110/125LPW.Model No-LFLN-150-CDL/60-M

Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure.

Laying only Cable of 4 core 10 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½ & 4 core

Laying of one No. cable of 4 core 10 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Laying Cable upto 3/4 core 25 Sq mm on Wall / surface incl. S&F Ms saddles with earthing attachment into SWG

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) 50 mm dia Protection with necessary fittings and jointing metarials as required

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

Add GST @ 18%

Add Labour Welfare Cess @ 1%

Please Enable Macros to View BoQ information