CO Veterinary Hospital at Rohru SH Civil work including WSSI Rain Harvesting Tank Septic tank etc

Excavation in earth work in all heights and depth in all kinds of soils, including saturated soil comprising of pick work, jumper work, and blasting work both in soft and hard rock with chiselling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer -in-Charge at site. according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and un- useful material and transportation of the un -useful material for disposing at dumping site (to be arranged by the contractor) to the satisfaction of Engineer- in -Charge through all modes of transportation including head load, animal load or mechanical means along with its levelling fine dressing and with all kinds of labour ,machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All useful material such as stones shingles aggregates and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used / removed per the direction of engineer in charge. any loss to the public and private property during the course of excavation and disposal of servicable and unservicable material shall be the absolute rtesponsibilty of the contractor and shall have to be duly compensated by him in all respects R/Wall and B/wall.

P/l cement concrete 1:6:12 ( 1cement: 6sand: 12 graded stone agg 40 mm nominal size and curing complete excluding the cost of form work in plinth and foundation

P/l cement concrete 1:4:8 ( 1cement: 4sand: 8 graded stone agg 40 mm nominal size and curing complete excluding the cost of form work in plinth and foundation

P/F M.S.Holder bat clamps of approved design to C.I or S.C.I pipe i/c cement concrete block 10×10×10 cms of 1:2:4 (1cement : 2sand : 4graded stone aggregate 40mm nominal size) and cost of cutting holes and making good the walls accessories for 150mm dia meter with in all leads and lifts as per satisfaction of engineer in charge.

P/f Kota stone slab flooring base of cement mortar 1:4 ( 1 cemen: 4sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, i/c rubbing and polishing complete (25 mm thick)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

6mm thick cement plaster to ceiling with cement mortar 1:4 (1cement : 4sand) within all leads and lifts as per satisfaction of Engineer in charges .

P/f Unistone 12 mm thick cladding on RCC surfaceside as on face of arch masonary wall etc on 12 mm cement plaster 1:3 ( 1cement: 3sand) and jointed with cement slurry i/c scaffolding etc complete.

15mm cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor twol level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (1cement : 6sand) within all leads and lifts as per satisfaction of Engineer in charges .

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor twol level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (1cement : 6sand) within all leads and lifts as per satisfaction of Engineer in charges .

Providing plinth protection 50mm thick with cement concrete 1:3:6 (1cement : 3sand : 6graded stone aggregate 20mm nominal size)

Constructing coursed rubble hammer dressed U-Shape open surface drain with side wall 15x22cm with cement mortar 1:6 (1cement : 6sand) and inside plastering with cement mortar 1:3 (1cement : 3sand) including earth work and laying 10cm cement concrete 1:5:10 (1cement : 5sand : 10graded stone aggregate 40mm nominal size) and 7.5cm cement concrete 1:2:4 (1 cement :2 sand :4 graded stone aggregate of 20mm nominal size and finished with a floating coat of neat cement complate as per standard design.

Providing and laying cement concrete work 1:4:8 ( 1 cement :4 sand : 8 graded stone aggregate 20mm nominal size ) in all leads and lifts:- (i) Foundation and plinth

Providing and laying cement concrete work 1:1 1/2 :3 ( 1 cement : 1 1/2 sand :3 graded stone aggregate 20mm nominal size) in all leads and lifts:- (a) Suspended floors, roofs landing and shelves and their support, balconies , beams, girders, bressumers and cantilever.

Brick work with common burnt clay half brick masonry F.P.S (Not modular) brick or class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and size in ; Cement mortar 1:4 (1cement : 4 coarse sand).

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1cement : 6 coarse sans : 12 graded stone aggregate 20 mm nominal size ) upto plinth level with : (i) cement mortar 1:6 (1 cement : 6 coaese sand)

cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) (1) 40 mm thick.

15 mm thick cement plaster of mix : (i) 1:4 (1 cement : 4 coarse sand ).

Providing and laying cement concrete weork 1:5:10 (one cement : five coarse sand : ten graded stone aggregate forty milimetre nominal Size) in all leads and lifts. (i) In foundation and plinth

Providing and laying cement concrate , 1:1.5:3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including carrage of materials in all leads and lifts by mechnical or manual means. (i) Suspended floors, roofs landing and shelves and their support, balconies,beams, girders, bressumers and cantilever.

15 mm thick cement plaster of mix : (i) 1:4 (I cement :4 coarse sand )

Constructio of chamber 300×300×500 inside size for stop cock with C.I. surface box 100×100×75 mm ( INSIDE) with hinged cover fixed in cement conc. Slab 1:2:4 mix.( 1 cement:2 sand: 4 graded stone aggregate 20 mm nomonal size) 75 mm thickness. Foundation concrete 1:5:10 (1 cement:5 sand:10 graded stone aggregate 40 mm nomonal size) and inside plastering with c.m. 1:3 finished with floating coat of neat cement and i/c curing complete. with 200 mm thick wall of brick masonary in cement mortar 1:3(1 cement: 3 sand)

Constructio of manhole with R.C.C. top slab in 1:2:4 mix.( 1 cement:2 sand: 4 graded stone aggregate 20 mm nomonal size) . Foundation concrete 1:4:8 (1 cement:4 sand:8 graded stone aggregate 40 mm nomonal size) and inside plastering with 15 mm thickness with cement mortar 1:3 finished with floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) finished smooth complete including curing and testing including carriage of materials within all leads and lifts inside size 800 mm x 800 mm and 500 mm deep including C.I. cover with frame ( Light duty single seal pattern-1 ) 455x 610 internal dimensions total weight of cover frame to be not less than 38 kg.( Weight of cover 23 kg and weight of frame 15 kg.) with 200 mm thick walls of brick masonary using common burnt clay building bricks in cement mortar 1:3 ( 1 cement: 3 sand)

Providing and fixing 40x3 mm flat iron holdfast 40 cm. long i/c fixing to frame with 10mm dia bolts& nts and wooden plugs and embeding in cement concrete block 30x10x15 cm 1:3:6 ( 1cement: 3sand: 6graded stone aggregate 20 mm nominal size)

Filling in plinth with sand under floors including watering, ramming consolidatingand dreesing complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing form work with steel plates (3.15mm) three point fifteen milimetre thick welded with angle iron in frame (30x30x5mm) ( Thirty x thirty x five milimetre) so as to give a fair finish including centering, shuttering, strutting and propping etc., with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4mtr.(Four metre) and removal of the same for insitu-reinforced concrete and plain concrete work including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. (a). Foundations, footings & bases of columns etc., and mass concrete.

(d). Beams, cantilevers, girders and lintels. i. Sides and soffits of beams, beam haunching, cantilevers, bressumers and lintels not exceeding 1 mtr. In depth in all heights from floor.

(c). Column, pillars, posts and struts. (i). Square, rectangular or polygonal in plan.

(b).Flat surfaces such as soffits of suspended floors, roofs, landing and the like. ( i). Floors etc., upto 200mm( Two hundred milimetre) in thickness.

( e) Edges of slabs and breaks in floors and walls: under 20 cm (Twenty centimetre) wide.

(f). Stair cases with slopping or stepped soffits excluding landing

Providing and laying M-20 grade of cement concrete mechanically mixed and vibrated with minimum cement content 300Kg./Cum. with crushed stone aggregate 20mm nominal size and curing complete excluding cost of rorm work and reinforcement for reinforced concrete work in within all leads and lifts as per directions of Engineer in charges. Foundation footing, basis of columns and the like and mass concrete.. within all leads and lifts as per directions of Engineer in charges

Suspended floor, roofs, landing and shelves and their support balconies, beams, girders, bressumers and cantilever upto floor two level within all leads and lifts as per directions of Engineer in charges i) upto all floor level

Stair cases (Except spiral stair cases) excluding landing but including preparing of the surface and finising of nosing (i) upto all floor level within all leads and lifts as per directions of Engineer in charge

Columns, pillars, posts and struts (i) upto all floor level..

Providing Tor steel reinforcement for RCC work including bending, binding and placing in position complete upto all floor level.. With in all leads and lifts as per directions of Engineer in charge

Second class Brick work using common burnt clay building bricks with rat trap bound in super structure in cement mortar 1:6 (1 cement : 6 sand) in all leads and lifts as per directions of Engineer in charges i) upto all floor level

Half brick masonry in common burnt clay building bricks in super structure in cement mortar 1:4 (1 cement : 4 sand) 2nd class brick (i) upto all floor level with in all leads and lifts as per directions of Engineer in charge

Providing wood work in frames of doors windows celerestory window and other frames wrought, framed and fixed in position etc 2nd class deodar wood

P/f 12 mm thick 150 mm wide pelment with 25 mm dia wooden curtain, rods and brackets in cluding fixing 25x3 mm M.S flat at 10 cm long and plugs etc complete. Ist class indian teak wood

P/F pannelled and glazed or panneled glaze shutters for door windows and celerestory window, i/c black enamelled iron butt hinges with necessary screws 40 mm thick

Providing and fixing steel wire guage shutter using galvainsed MS wire gauge of IS gauge desination 85kg with wire of dia 0.55mm for doors, windows and clearestory windows including bright finished black enameled iron hinges with neccesary screws 40mm thick 2nd class deodar wood with in all leads and lifts as per approved specification / design.

Provding and fixing M.S grills of required pattern in wooden frames of windows etc with M.S flats, square or round bars with round headed bolts and nuts or by screws plain grill.

P/F 19mm thick water proof termite resistant commercial board box including shelves & shutter the back side of cup board / cabinet shall be of 8mm thick ply and all the cut portions of shelves shall be finished with 6mm thick hard wood edging. The cut portion of shutters from outside shall be finished with 1mm thick lamination of approved shade i/c hinges & all accessories etc. complete as per detailed architectural drawing pertaining to job no. 195/2 to 199/1 with in all leads and lifts as per directions of Engineer in charge

Providing and fixing 19mm thick Commercial Board water proof shutters with hard wood edging and PGI sheet lining in inside of shutter of approved size i/c bright finished iron butt hinges etc; complete as per architectural designs/ drawings for this work with in all leads and lifts as per directions of Engineer in charge

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :

Providing and fixing bright finished brasstower bolts (Berrel type) with screws etc complete 200×10mm

Providing and fixing bright finished brass handles with necessary screws etc. complete within all leads and lifts as per directions of Engineer in charges 100mm

Providing and fixing bright finished brass casement stays(straight peg type) with necessary screw etc complete (250 mm, not less then 0.28 kg)

P/F bright finished brass 100mm. Mortice latch and lock and a pair of levers, handles with necessary screws etc. complete (indian make of approved quality)

Stone soling properly hand-packed filling interstices with spalls and consolidating with power road roller to the requested gradient and comber including spreading watering and rolling of binding materials moorum or earth etc. complete as per HP.PWD specification. 150 mm spread thickness (finished work including materials and labour)

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Providing and fixing 0.60mm th. Prepainted steel sheet in roofing with hot dipped metallic zinc coated sheetwith top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat polyster of 5microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks,bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete all accesories as required as per the direction of Engineer- IN- Charge

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick Prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating + back coat polyster of 5microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks,bolts and nuts 6mm dia metre with prepainted G.I. limpet and bitumen washers complete with all accesories as required as per the direction of Engineer- IN- Charge .

P/f 15cm wide 45 cm. overall semicircular plain G.I sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. i/c making necessary connections with rain water pipe complete as per design ( 0.80 mm thick)

P/f on wall face PVC (D-Plast) rain water pipes working pressure not less than 4.5 kg/sqm i/c filling the joints with approved adhesive complete. 150 mm dia

Providing and fixing on walls face PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete. 150 mm dia PVC plain bend

150 mm dia PVC shoe

Providing and fixing M.S. BP Sheet 2.00 mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely)including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Steel work welded in built up sections, trusses and framed work including cutting, hosisting fxing in position and applying a priming coat of red lead paint within all leads and lifts as per directions of Engineer in charges in beams joists channel, angles, tee, flats with connecting plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters, purlins connected to common rafters and the like

Providing and fixing moulded hand rail of M.S. hollow pipe 50mm dia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separetely including carriage of materials within all leads and lifts :-.

Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter scoured with wire brushes fine steel wool scrapers and sand paper complete. Ready mixed priming paint brushing ref lead within all lead

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture

Painting two coats (excluding priming coat) on new wood and wood bassed surfaces with ready mixed paint to give an even shade including cleaning the surface of all dirt, dust and other foregin matters sand papering and stoping with ready mixed paint other than white.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after throughly brushing the surface free from mortar droopings and other foreign matter and also including preparing the surface even and sand papered smooth within all leads and lifts as per satisfaction of Engineer in charges .

Provding under layer for plinth protection of 75mm thick (unconsolidated) bed of dry brick/stone aggregate 40mm nominal size) well rammed and consolidated and grouted with fine sand including preparetion of ground.

Centring and shuttering including strutting propping etc and removal of from for:- (i) Suspended floors, roofs , landings , balconies and access platform .

(ii) Vertical surface such as weell any thickness

(iii) Edges of slabs and break in floors and walls :-i)Under 20cm wide

Steel reinforcement for R.C.C work including straightening cutting, bending , placing in position and bindig all complete all complete above plinth leve (i) thermo-mechanically treated bars of grade i.Fe-500D or more including carriage of materials in all leads and lifts by machanical or manual means .

Proving and fixing high pressure PVC spigot and socket waste and ventilating pipe 110 mm dia

Providing and fixing PVC cowel 110 mm dia .

Supplying and fixing 455 x 610 mm cast iron cover without frame.

Centering and shuttering including strutting, propping etc. and removal of form for upto all floor levels including carriage of materials in all leads and lifts by mechanical means or manual means. (a) Flat surfaces such as soffit of suspended floors, roofs landing and the like.

(b) Edges of slabs and breaks in floors and walls.(a) Under 20 cm wide

Steel reinforcement for R.C.C work including straightening cutting , bending , placing in position and bindig all complete above plinth level (i) Thermo-Mechanically treated bars of grade i.Fe-500 or more including carriage of materials in all leads and lifts by mechanical or manual means.

Supplying and fixing 455x 610 mm cast iron cover without frame

Providing and laying in trenches, galvanised mild steel tubes (medium grade), tube fittings (earth work in trenches to be measured and paid separately 25mm nominal size within all leads and lifts as per satisfaction of Engineer in charges

Providing and fixing to wall ceiling and floor galvanised mild steel tubes ( medium grades) tube fitting and clamps including making good the wall ceiling floor within all leads and lifts as per satisfaction of Engineer in charges.

Making connection of galvanised ms tube distribution branch with galvanised MS tube 20mm to 40mm nominal size by providing and fixing tee i/c cutting & threading etc. within all leads and lifts as per satisfaction of Engineer in charges

Providing and fixing PVC water tank of ISI:-12701 marked, G.I. inlet and outlet connection, 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all heights above ground level. ( make SINTEX having capacity of 1000 liters )

P/f water meter stop cock in GMS tube /c necessary fitting such as mild steel galvanised jam nut. Sockets etc. complete cutting and making long screws ( water meter and stop cock to measured and paid for separately) 25 mm nominal bore

Providing and fixing Plytheline-Aluminium-Polyehuylene (PE-AL-PE) composite pressure pipe U-V stabilized with carbon black conforming to IS-15450-2004 water supply including clamp at onemeter spacing cutting fixing and making good the wall etc. including carriage of material in all leads and lifts. 15 mm nominal bore:-1216

Providing and fixing composite end seal compression fittings as per IS-15450-2004 including carriage of materials in all leads and lifts Equal Tees 1216

educing Tees 1620 × all branches

Female branch Tee 1216×1216×15 mm thread

Female elbows 1216×15 mm thread

Male thread cinnector 1216×15 mm thread

Female thread connector 1216×15 mm thtread

couplers 1216

Reducer 1620×1216

Providing and fixing PVC ISI marked floor trap of self cleaning design including fixing with approved adhesive coat of cutting and making good the wall anf floors including carriage of materials within all leads and lifts 110 mm × 90 mm

Providing and fixing High Pressure PVC spigot and socked, waste and ventilated pipes ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- 110 mm dia

75 mm dia

Providing and fixing PVC single equal branch withoval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- 110 mm dia

75 mm dia

Providing and fixing PVC door band with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- 110 mm dia

75 mm dia

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- 75 mm dia

110 mm dia

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- 75 mm dia

110 mm dia

Providing and fixing PVC double equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- 75 mm dia

110 mm dia

Providing and fixing PVC plain double equal branch ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- 75 mm dia

110 mm dia

Providing and fixing PVC cowl including carriage of materials within all leads and lifts:- 75 mm nominal diameter

110 mm nominal diameter

Providing and fixing vitreous china wash down water closet ( European type W.C. pan/Indian type W.C. pan) with integral P or S trap if required, including jointing the trap with soil pipe in cement pipe in C.M. 1:1 ( 1 cement: 1 sand)(seat and cover to be measured and paid for seperately) Orissa pattern:-No 20004 size 580× 400 mm of CERA/HINDWARE.

Providing and fixing PTMT coloured/white high density polyethylene/poly propylene 10.00 liters capacity ( full flush ) European standard control low level flushing cistern, with a pair of C.I. Brackets, With fittings such as lead valve with polythene flot, with push botten, coupling for connection with complete with inlet,outlet and overflow pipes 40 mm dia C.P. flush bend etc. complete No. 2603 of CERA/HINDWARE

P/f stainless steel sink i/c all leads and lifts, as per HPPWD specs of 1990 V-1 as directed by the engineer in charge

Providing and Fixing Vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and macking good the same but excluding fittings FLATBACK category No 1025 No 1025 size 550x400 mm

Providing and fixing vitreous China bowl pattern urinal including connection the urinal with waste pipe by means of white lead mixed with chopped hemp ( waste pipe to be measured and paid for seperately ) of size 633x395x420 mm with automatic flushing systern with fitting complete RS or EI brackets painted white No. 5001 of CERA size 42x39x63

Providing and fixing vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fittings.

Providing and fixing flush pipe seperators for urinal with fittings such unions, clamp etc including holes in walls and making good the same complete 15 mm nominal bore

Providing and fixing Division plate for urinals 600x300 mm vitreous China with fitting complete category No. 61001 of CERA

Providing and fixing PVC 110 mm size 'P' or 'S' trap for water closet ( squatting pan ) including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete 110 mm dia.

Providiing anf fixing C.P. Brass chain 50 cm long and rubber plug of following sizes for sink or wash basin 32 mm dia.

Providing and fixing M.I. Union for wash basin or sink including carriage of materials within all leads and lifts. 32 mm dia

Providing and fixing C.P. Brass S Trap for wash basin and sink 32 mm dia

Providing and fixing C.P. Bottle Trap for wash basin or sink including carriage of materials within all leads and lifts. 32 mm dia

Providing and fixing C.P. Brass waste for wash basin or sink including carriage of materials within all leads and lifts. 32 mm dia

Providing and fixing 32 mm dia. PVC waste pipe for wash basin or sink including check nut including carriage of materials within all leads and lifts.

Providing and fixing 100 mm dia. C.P. grating including carriage of materials within all leads and lifts.

Providing and fixing 600 mm x 450 mm bevelled edge mirror of superior glass mounted on 6 mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washer including carriage of materials within all leads and lifts.

Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws including carriage of materials within all leads and lifts:- 600x20 mm

Providing and fixing 600 mm x 120 mm glass shelf with C.P. brass bracket and guard rail complete.

Providing and fixing C.P. brass toilet paper holder.

Providing and fixing C.P. brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws.

Providing and fixing C.P. brass bib tap with capstan head including carriage of materials within all leads and lifts:- 15 mm dia

Providing and fixing C.P. brass pillar tap with capstan head including carriage of materials within all leads and lifts. 15 mm dia

Providing and fixing PVC connection pipe with brass union including carriage of materials within all leads and lifts:- 45 cm length 15 cm nominal bore

Providing and fixing brass full way valve with wheel including carriage of materials within all leads and lifts:- 15 mm nominal bore:-

Providing and fixing water pump to lift rain water including carriage of materials within all leads and lifts:-

Providing and fixing cast iron cover 300x300 mm with frame for gully trap the weight of cover to be not less than 4.53 kg