ADDN / ALTN AND SPL REPAIRS TO BLDG AND COOK HOUSE OF P-162A OF STATIC WORK SHOP EME AND FITMENT OF FLAME PROOF LIGHT AND EXHAUST FAN AT PYRO-TECHNIQUE STORAGE BAY (P-77) AT INS UTKROSH UNDER GE MINNIE BAY, SRI VIJAYA PURAM

M&L for MS TMT bars 10mm dia and over cut to length bent to shape reqd including cranking, bending spirally for hooking for columns, hooking ends and and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified .

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key all as specified and as directed.

M & L for rendering 5 mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 (Total 15 mm thick) on concrete or brick masonry surfaces including mixing water proofing compound as per manufacurers instructions and finishing the top surface even and fair complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M & L Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer on truss work & new pressed steel frame complete all as specified and directed.

M&L for completely removal of existing treatment on old surfaces of wall and preparation of old surfaces of wall and applying TWO coat of oil emulsion distemper over a coat of primer complete all as specified and as directed.

M&L for complete removal of existing treatment and preparation of old surfaces of CEILING and applying two coats of oil emulsion distemper over a coat of primer all as specified and as directed.

M&L for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including preparation all as specified and directed (Rate inclusive of scaffolding at any height).

M&L for applying a layer of 1mm thick wall care putty on wall and making surface even and smooth complete all as specified and as directed.

Dismantling floor, hearth or wall tiles including cement mortar bedding(but not backing) and removing serviceable tiles to stores and rubbish off the premises complete all as specified and as directed.

M&L for

M&L for ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm in floor, over 15 mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and as directed.

Taking down chowkats or frames(without taking off shutters from the frame) area exc 1.5 Sqm but n.exc 4.0 Sqm each.(including Aluminium windows/ventilators etc) complete all as specified and as directed.

S&F factory made solid panel PVC Door shutter 30mm thick (Style) consisting of frame made out MS frame shall be covered with heat moulded wood grain printed PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90ͦ C ) used instead of exposed portion of PVC sheet beading. having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail, & bottom rail; Panneling of colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement at site as per specification and drawin complete all as specified and as directed.

S&F 25mm dia aluminium anodised best quality curtain rod alongwith brackets in pairs fixed both ends (rates included of brackets) complete all as specified and as directed.

S&F of 150mm Floor door stoper of aluminium alloy and tounge, anodised, with hard drawn steel sring, fixed in door complete all as specified and as directed.

S&F in repair decorative globes for curtain rails to be fixed at both end of curtain rails complete all as specified and as directed.

S&F Anodised aluminium grill (Wt not less than 3.26Kg/Sqm) (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed .

Supply and laying of CPVC pipes 20 mm dia outer bore SDR 11 &plain CPVC SDR 11 fittings on walls /ceilings or laying in floors complete all as specified.

S&F 20mm bore CPVC Brass Union complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing all as specified and as directed.( Note : Height of the bldg up to G+3 storey including necessary safety arrangements)

S & F Aluminium flat iron work in wind ties 40x6mm size fixed with 50mm/ 75 mm aluminium self staging screws with integral EPDM washer screwed in roof covering all as directed. (Note :- Height of the bldg up to 15 mtrs including necessary safety arrangements)

S&F in repairs stainless steel plate rack of size 900x 750 x 250 mm made of 1.00mm thick stainless steel fixed into wall with necessary brass screws and plugs complete all as specified and as directed.

S&F in repair CP Waste coupling any 32/40 (any dia) suitable for Kitchen Sink/WHB fixed with waste pipe complete all as specified and as directed.

One light point controlled by one one way switch.

M&L for point wiring with two run of PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm (FRLSH), stove enamelled steel conduit and drawing one run of 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable (FRLSH) as earth continuity wire in green colour connected to common earth and each terminal box / fitting complete all as specified and as directed. Note: The quoted rate inclusive for the following :- (a) Proper colour coding is to be followed as per IS Specification. (b) Wiring shall be concealed/ on surface with stove enamelled steel conduit as per site requirement. (c) Cutting chasis in wall / floor beam to be concealed conduit and make good the surface is deemed to be included in the above rates.

One exhaust fan point controlled by one one way switch.

Supply and fixing LED light fitting 2 x 16 Watt flame proof, CMRI certified recommended for gas/vapour group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminium housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc., complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed.

Supply and fixing switch flame proof rotary type with termination box in LM6, 16A single pole 250V complete all as specified and as directed.

Supply and fixing exhaust fan of size 380mm, flame proof, 1440 RPM, 2350 CFM, 230V, CIMFR certified recommended for gas/vapour group of IIA, IIB & IIC, Zone 1 & 2 and IP 65 protection with aluminium blade with MOC-cast iron motor including louvre complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed.

Supply and fixing flame proof 4 way SPN distribution board in LM-6 construction with cable termination box incomer MCB SPN 32 Amps - 01 No and outgoing MCB SP 06 Amps - 2 No complete all as specified and as directed.