Making And Installation Of Freedom Fighter Sculptures Of Jharkhand And India At Rajbhawan (Jharkhand)

Amount

Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.

Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for

Foundations, footings, bases of columns, etc. for mass concrete

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)

Centering and shuttering including strutting, propping etc. and removal of form for

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Centering and shuttering including strutting, propping etc. and removal of form for

Suspended floors, roofs, landings, balconies and access platform

providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL)

providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.

10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}

12mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)})

16mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)})

Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab colour black, Cherry/Ruby red Area of slab upto 0.50 sqm

Supply fitting fixing in a Particular Place Sinage Board Writing on Granite Base all complete as per drawing Specification and direction of E/I. Engraving letters in hard stone

Carriage of materials from source to site work including loading and unloading all complete job as per specification and direction of E/I.

Brick=7+1(8km)

Sand lead = 10 km

Stone Metal Chips - 22km

Non - Scheduled Item PHULO-JHANO AND RAGHUNATH MAHTO, GURU GOBIND SINGH 6 FEET STATUE MADE OF GUN METAL (BRONZE) WITH ALL FITTING, BREEZING AND PATINATION (ACID COLORING)

Making of sculpture in modeling clay for one six feet statue /sculpture

Making of piece mould in Glass - fiber in 2 layers, Making of sculpture in Glass- fiber in 3 layers, Coloring of sculpture with N.C colour with spray.

Making of sculpture in bees, micro & paraffin wax of 6 to 8mm thickness and covered with grog plaster of paris core with iron and mess reinforcements for pouring bronze metal at 1280 degree temp. it also included the pouring channels made of wax composition, For One number 85 Kg wax composition.

Bronze 10 times by weight of wax composition. 450KG+20% Wastage and Burning Loss = 540 kg approx

Breezing of bronze pieces with bronze rods (including labour components and required gas)

Polishing chipping and patination with salts and required acids

Supply transportation and installation with crane and pulley (including labour components),Artist charges for making sculpture.

SUBHAS CHANDRA BOSE AND SARDAR VALLABHBHAI PATEL 7 FEET STATUE MADE OF GUN METAL (BRONZE) WITH ALL FITTING, BREEZING AND PATINATION (ACID COLORING)

Making of sculpture in modeling clay for one six feet statue /sculpture

Making of piece mould in Glass - fiber in 2 layers, Making of sculpture in Glass- fiber in 3 layers, Coloring of sculpture with N.C colour with spray.

Making of sculpture in bees, micro & paraffin wax of 6 to 8mm thickness and covered with grog plaster of paris core with iron and mess reinforcements for pouring bronze metal at 1280 degree temp. it also included the pouring channels made of wax composition, For One number 110 Kg wax composition.

Bronze 10 times by weight of wax composition. 750KG+20% Wastage and Burning Loss = 900 kg approx

Breezing of bronze pieces with bronze rods (including labour components and required gas)

Polishing chipping and patination with salts and required acids

Supply transportation and installation with crane and pulley (including labour components),Artist charges for making sculpture.

MAHATMA GANDHI 5.5' FEET SITTING POSITION STATUE MADE OF GUN METAL (BRONZE) WITH ALL FITTING, BREEZING AND PATINATION (ACID COLORING)

Making of sculpture in modeling clay for one six feet statue /sculpture

Making of piece mould in Glass - fiber in 2 layers, Making of sculpture in Glass- fiber in 3 layers, Coloring of sculpture with N.C colour with spray.

Making of sculpture in bees, micro & paraffin wax of 6 to 8mm thickness and covered with grog plaster of paris core with iron and mess reinforcements for pouring bronze metal at 1280 degree temp. it also included the pouring channels made of wax composition, For One number 110 Kg wax composition.

Bronze 10 times by weight of wax composition. 750KG+20% Wastage and Burning Loss = 900 kg approx

Breezing of bronze pieces with bronze rods (including labour components and required gas)

Polishing chipping and patination with salts and required acids

Supply transportation and installation with crane and pulley (including labour components),Artist charges for making sculpture.

GURU GOBIND SINGH'S 4 SONS 5'6'' 4'6'' 4' 3'6'' FEET SITTING POSITION STATUE MADE OF GUN METAL (BRONZE) WITH ALL FITTING, BREEZING AND PATINATION (ACID COLORING)

Making of sculpture in modeling clay for one six feet statue /sculpture

Making of piece mould in Glass - fiber in 2 layers, Making of sculpture in Glass- fiber in 3 layers, Coloring of sculpture with N.C colour with spray.

Making of sculpture in bees, micro & paraffin wax of 6 to 8mm thickness and covered with grog plaster of paris core with iron and mess reinforcements for pouring bronze metal at 1280 degree temp. it also included the pouring channels made of wax composition, For One number 300 Kg wax composition.

Bronze 10 times by weight of wax composition. 1350 KG+20% Wastage and Burning Loss = 1620 kg approx

Breezing of bronze pieces with bronze rods (including labour components and required gas)

Polishing chipping and patination with salts and required acids

Supply transportation and installation with crane and pulley (including labour components),Artist charges for making sculpture.

Add 18 % GST

Add 1% Labour Cess

AKASH KUMAR SINGH (BID ID -666746)