REPAIRS TO VARIOUS B/R RELATED ITEMS INCL PPGL SHEET, DOORS, WINDOWS, JOINERY ITEMS, FLOORING, CEILING AND CERTAIN OTHER MISC ITEMS TO CERTAIN OTM AND MD ACCN INCL CERTAIN E/M ITEMS IN AOR OF AGE B/R LEKHANAGAR UNDER GE NASIK ROAD.

Amount

Dismantling of steel window/ventilators any description and any size complete all as specified and directed.

S&F for powder coated aluminium (minimum 50 micron powder coated) door chowkats/frame made with aluminium section of size 100x44x2mm thick, and frames fixed in opening with hold fasts of size 25x3mm flat 150mm long 6 nos in each frame including cutting holes in brick work and embedded in PCC (1:2:4) bed block of size 150x150x150mm each and match the existing surfaces complete all as specified and directed.

S&F for powder coated aluminium (minimum 50 micron powder coated) shutter, aluminium section of size vertical styles & top rail of shutters with section 84x44x2mm thick and middle & bottom rail of shutters with section 112x44x2mm thick including 5mm thick tinted glass pane at top and 12mm thick both side pre-laminated board at bottom pane inserted in position including all necessary fixing arrangement, joining cleats, glazing clips, rubber packing, aluminium anodized beading, screws etc; floor hinges, aluminium tower bolt 200mm long-02 Nos., mortice lock 100mm size 4 lever, 100mm dia disc handles etc complete all as specified and directed.

S&F aluminium (minimum 50 micron powder coated) frame for doors, windows, ventilators and glazed partion frame of any size with one or more rebates including joining cleat,beading and connected accessories as required for fixing etc. complete all as specified. Note:(a) During fixing of frames, surface shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement.

S&F aluminium (minimum 50 micron powder coated) window and ventilator sliding shutters, side hung/sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays/tower bolt 150mm long (1 No.) hinges type B-21, 100mm long (2 Nos.), suitable handle (1 No.), rollers, grip etc. complete all as specified. Note:work is to be executed for high rise bldgs.

S&F 3.0 mm thick sheet glass, ordinary quality and glazing with silicon gel in square n exc 0.5sqm in each pane.

S& F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. Note:work is to be executed at any height and situation.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar.

M&L for Granite (of any type) work 20mm thick machine cut, (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match.

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations. (Stone slabs so provided shall be not less than 900mm in length)

Taking down carefully (copper/aluminium) point wiring in ceiling and refixing the same in any position including replacing damaged material and lowering/rising the rod of ceiling fan if required complete and all as specified and directed by Engineer-in-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness, including cover fillets complete all as specified.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain wood grain printed PVC sheet inclusive of solvent cement and fixing with 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall as per specifications and drawing

Supply and fixing position suspended false ceiling system using T-grid suspended ceiling grid system . The size of grid shall be 600x600mm with GI frame work main runner 38x24x3600mm, cross tee25x24x600mm/25x24x1200mm and wall angle 24x24x2540mm( thickness of the materail of 0.30mm). using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in the drop texture as per IS-2095, part-I 1996, fixed in the grid of T-grid suspended ceiling grid system duly susupended by 4mm dia GI bar hanged from the purlins of the roof with butter fly clips complete all as specified and directed by Engr-in-Charg.

Dismantling wrought iron or mild any description such as steel gate, steel frame works, purlins, rafter, railings, balusters and window guard bars and directed by Engr-in-Charge. Note:work is to be executed for high rise bldgs.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 Grade St-240 complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting of any gauge,thickness,including Nainital or similar pattern roof coverings complete all as specified and as directed. Note:work is to be executed at any height and situation.

S&F Prepainted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/cladding to wall,fixed with self tapping screw complete all as specified and as directed. Gap between wall face and sheet if any shall be sealed using CM 1:3 with WPC.quoted rate deems to be inclusive of the same.

S&F Prepainted Galvalume aluminium zinc coating GI based Plain sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/cladding to wall,fixed with self tapping screw complete all as specified and as directed.

Supply and fixing in repairs 500 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position including GI tank nipple etc. complete and all as specified and as directed by Engineer-in-Charge. including dismantling existing water tank and removing from site of any capacity. Make : Sintex/Fusion/Polycon.

Supply and fixing in repairs 1000 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position including GI tank nipple etc. complete and all as specified and as directed by Engineer-in-Charge. including dismantling existing water tank and removing from site of any capacity. Make : Sintex/Fusion/Polycon.

S&F ball valves, 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms) fixed in repairs.

Taking up or down steel tubing and connections 15mm bore including bib taps, stop cock etc. Note:work is to be done in multistorey bldgs(int and ext plumbing).

Refixing old steel tubing and connections 15mm bore in new or old position (Walls, ceiling, floors, etc.) Note: GI tubing shall be concealed wherever directed by Engr-in-charge. Contractors quotated rates deems to be inclusive of the said provision.

S&F 15mm bore galvanised steel water tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors. Note: GI tubing shall be concealed wherever directed by Engr-in-charge. Contractors quotated rates deems to be inclusive of the said provision.

Taking up or down steel tubing and connections 20mm bore. Note:work is to be done in multistorey bldgs(int and ext plumbing).

Refixing old steel tubing and connections 20mm bore in new or old position (Walls, ceiling, floors, etc.) Note: GI tubing shall be concealed wherever directed by Engr-in-charge. Contractors quotated rates deems to be inclusive of the said provision.

S & F 20mm bore galvanised steel water tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors. Note: GI tubing shall be concealed wherever directed by Engr-in-charge. Contractors quotated rates deems to be inclusive of the said provision.

Moorum / Red Bajari filling in floor or pavings, laid in layers n. exc. 15 cm thick, spread, levelled and rammed including watering complete.

M&L for broken stone hard core of gauge n. exc. 63 mm deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rolled / rammed to a true surfaces complete.

Demolition of cement concrete in ground floor and pavings n.exc 15cm thickness (below or above ground level).

M&L for 75mm PCC 1:4:8 Type D-2(using 40mm graded aggregate) as in sub base over rammed earth complete all as specified and as directed.

M & L for 100mm PCC 1:4:8 Type D-2(using 40mm graded aggregate) as in sub base over rammed earth complete all as specified and as directed.

Chequered cement concrete tiles with grey cement and pigment 40cmx40cmx30mm thick, with rubber moulded glassy finished surface, laid in floors over and including 15mm thick screed bed or beddingin CM 1:6 pointed in neat cement slurry in floors.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper mbedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping complete all as specified and directed

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc.

M&L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6.

M&L for Rendering 15 mm thick in cement mortar 1:4 on wall/ceiling surfaces finished fair and even incl curing. Note:For multistorey bldgs only sccaffolding/ladder shall be used. work to be executed at any height.

Taking down chowkhats or frame with shutter (without taking off shutters from the frames) n.exc 1.50 sqm each removing from the site complete all as specified and directed.

Taking down shutter of any description exc 1 sqm but n exc 2 sqm from chowkhat and removing to or from store as required complete all as specified.

Taking down shutter of any description exc 2 sqm from chowkhat and removing to or from store as required complete all as specified.

Taking down shutters of any description n.exc 1 sqm from chowkhat and removing to or from store as required complete all as specified.

Taking down chowkhats or frame n.exc 1.50 sqm each removing from the site complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 sqm but n. exc 4 sqm each removing from site complete all as specified and directed.

S&F factory made of 2nd class hard wood 35mm thick made glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, size of members of shutters as spfd in SSR Part-1, section 8, clause 8.24(a) complete allas specified and directed.

S&F for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides particle board core including two coat of synthetic enamal paint over one coat of pink primer all as specified and directed by Engr-in-charge.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube etc all as specified and as directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement,suppling & fixing in the frame at site as per specification & drawing.

S&F 75mm butt hinges, medium weight, cold rolled mild steel.

S&F 100mm butt hinges, medium weight, cold rolled mild steel.

S&F aluminum anodised barrel tower bolts extruded section of size 150mm long (ISI Marked) in repairs complete all as specified and directed .

S&F 150mm long extruded aluminum alloy (fabricated type) handles anodised ISI marked complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F for door stoper of brass 140mm body and tounge complete all as specified and directed.

M&L for preparing surfaces of wood an wood based surfaces of any description not otherwise described over 10cm width or girth and applying of two coats synthetic enamelled paint over a coat of pink primer complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs,washers including bedding in cement mortar on to dwarf walls, or including fixing cantilever bracket and connecting union to waste pipe complete fittings over all size 495mmx420mm xbowl size 410mmx330mmx160mm.

S& F in repairs viterous China urinal, bowl type back or corner wall type of size 465x355x265 complete with waste fittings including providing and fixing complete all as specified.

S&F ready made PVC conection 15mm bore 450mm long with end brass nuts, screws and PVC washer complete all as specified and directed.

S&F in repair angle cock, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipes as for unions and fixed in repairs all as specified and directed of size 15mm bore.

S&F in repairs flush pipe of polyethylene of low or high density of PVC 32mm dia suitable for urinal omplete all as specified and directed by Engr-in-Charge.

S&F in repair waste fittings 40mm brass chromium plated for glazes ware sinks, basins etc with long screwes shanks and fly nuts flange end bedded in red lead cement and other end fixed in sink complete all as specified and directed by Engr-in-Charge.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground surfaces.

M&L for MS work conforing to Fe-290-0 Grade E-165 for fencing posts and struts in fencing including cutting bending top to shape as directed drilling holes complete and all as specified and directed.

M&L for mild steel screw bolts (machine made) 5 ot 10mm dia of shank with hexagonal or square heads at one end and screwed the othere, each screw end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long.

Dismantling chan link fencing of any gauge & size not exceeding 4 Kg/Sqm complete all as directed by Engr-in-Charge.

Supply only chain link fencing using 4mm dia GI wire 50x50mm mesh including line wires, any mesh, size & type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Fixing only chain link fencing including line wires any mesh,size and type complete all as specified and directed.

S&F mild steel round bars10mm dia and over, cut to length, bent to shape required, including fixing chanlink fencing etc

M&L for Preparing new untreated steel or iron surfaces over 10cm width or girth and and two coats of synthetic enamel paint over and including a coat of red oxide. Note:work is to be executed at any height and situation.

Dismantling boarding, cup board self/shutter any description fixed in any position with nails/screw etc complete all as specified and directed.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 60x30/ 45 x 70 mm (single/double rebated) mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.over and including M.S. hold fast/ lugs or SS dash fasteners.

M&L for 18-20mm thick both side prelaminated(decorative type) solid wpc board as in kitchen cabinets, partition etc over and including suitable butt hinges of ss, magnetic catcher, beading, ball bearing, runners, ss handles telescopic channel etc complete all as specified and directed to make the shutters / partition / drawers/kichen cabinet etc fully functional.

S&F continous stainless steel piano hinges fixed in repair width of flaps when open 40mm.

S&F magnetic catcher fixed in repair for cupboards complete all as specified and directed by Engr-in charge.

S&F in repairs Stainless steel soft close hydraulic action hinge with capacity to take load of 18 to 20 mm thick board all as per directed and specified by engr-in-charge

S&F in repairs for 100 mm stainless steel handles, cast type, polished type

S&F in repairs for 75 mm stainless steel handles, cast type, polished type

S&F in repairs Teliscopic runners/slider rails of Drawers closed length 500 to 600mm

Drilling holes of 3-5 cm dia thrrough cuddappah stone and RCC slab together as per directed by engr-in-charge

M&L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC concealed conduit (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.2mm thick, with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for the following. Note:- Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

All as per Ser No 81.00 above but One light point/ fan point controlled by one, one way swtich.

All as per Ser No 81.00 above but One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per Ser No 81.00 above but herein before but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including boards for mounting purposes.

All as per Ser No 82.00 above but here in before but on independent board.

All as per Ser No 81.00 above but here in before but one light point controlled by 2 way switches.

All as per Ser No 81.00 above but before but one bell/buzzer point controlled by one push button on the same board with other switches or independent.

M&L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC casing and caping (ISI marked) of adequate size and its accessories with PVC boxes, frames for modular fixtures of adequate size, for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for the following:-

All as per Ser No 82.00 above but One light point and one fan point controlled by one, one way swtich.

All as per Ser No 82.00 above but One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per Ser No 82.00 above but on independent board.

All as per Ser No 83.00 above but one light point controlled by 2 way switches.

All as per Ser No 82.00 above but one bell/buzzer point controlled by one push button on the same board with other switches or independent.

All as per Ser No 82.00 above butwith 2.5 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 2.5 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including Fibre insulation boards, treated on one face only of adequate size for mounting purposes.

Supply and fixing in replacement of switch modular type 6 Amps one way AC 230 Volts.

Supply and fixing in replacement of switch modular type 16 Amps one way AC 230 Volts.

Supply and fixing in replacement of modular type bell push 6 Amps, AC 230 Volts.

Supply and fixing in replacement of modular type socket 6 Amps 2/3 pin combined, AC 230 Volts.

Supply and fixing in replacement of modular type socket 6/16 Amps 2/3 pin combined, AC 230 Volts.

Supply and fixing in replacement of modular type fan regulator, AC 230 Volts.

Supply and fix in replacement ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish. Make - Havells /Anchor / Legrand.

Supply and fixing in replacement of high performance versatile LED tube 20 watt capacity, efficacy of more than 100 Lm/watt and double sided connection for additional safety measure for avoiding short circuit complete all as specified and directed by Engr in Charge.

Supply and fixing in replacement of LED batten suitable for 18/20 watt box type industrial batten designed for single LED T8 tubes, double sided connection, surface type (ceiling/wall) made from high grade sheet steel complete including 3 core flexible copper conductor cable of suitable size from ceiling rose.

Supply and fixing in replacement of LED 10 Watt inverter LED batten with rod complete with lithium ion battery with charging time 8-10 hours and backup time upto 4 hours mounted on square box of suitable size connecting up with three core flexible copper conductor cable of suitable size from ceiling rose.

Supply and fixing in replacement of bell, AC, 230 volts, single phase complete all as specified and directed. Make -Legrand/ Havells/ Anchor.

Supply only Decorative LED post top lantern, high PF, 40 Watt, energy saving and environmental friendly long life versatile pressure die cast aluminium housing, 360 degree indirect light, optimum light output, IP 65 protection, glare-free and better uniformty, 240 Volts of Cat ref No BGCTN 25W LED WW of Bajaj, complete all as specified and directed.

Supply and fixing in replacement of 30 Watt LED streetlight fitting luminaire, energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08, including 1.2 RM GI pipe bracket of 40mm dia, connecting up with 2/3 core flexible coppper conductor cable.

Supply and fixinf in replacement of LED luminaire 600 x 600mm, 36 watt, 220 volts AC recessed/ surface type fittings, IP 20 with epoxy powder coated CRCA sheet housing with electronic driver, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply and fixing in replacement of LED round shape 15 watt 220 volts AC recessed/surface type with high efficacy PMMA diffuser soft glare free light complete with drivers, clamps and suitable size as per ground requirement complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply and fixing in replacement of invertor LED bulkhead 10 watt 220 volts AC with high efficacy PMMA diffuser soft glare free light complete with drivers, clamps of CP No HLBH-15-10-CW-INV Halonix or equivalent and complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 81946.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

SVT ENGINEERS AND CONTRACTOR. (BID ID -3480705)

Alpha Construction (BID ID -3481420)

M/S SAMEER SUBHASH PATANI (BID ID -3485065)