PROCUREMENT OF LAB EQUIPMENT

Supply of lab equipment

Vernier Callipers (Vernier constant (0.02 cm)

Horizontal Board apparatus for Determining Cofficient of Static Friction between Wood and Glass (BASE BOARD 45 x 7.5 cm CSI' Very Superior quality having thick teak wood base, fitted with glass plate, complete with levelling screws, pan ,small graded weights, pulley and wooden block. Export quality. Heavy pattern)

HOOK'S LAW APPARATUS (Consisting of 50cm long mirror scale, spring, slotted weights with hanger and pointer, complete on heavy tripod stand On metal stand with Mirror Scale (a) CSI' Superior on heavy base, about 50 cm high for taking more readings, complete with weights (b) Helical Spring: Light spiral spring with pointer, easy to work with 50 gm. Weight Complete with hook for hanging. )

FLYWHEEL APPARATUS (CSI' superior quality Flywheel with weights Comprising of carefully machined and balanced Cast iron wheel and steel spindle is supported on ball bearings in strong iron brackets Thickness: 4.4 cm, Diameter :20 cm • Wall type with a pointer • With revolution counter Set of slotted weights for flywheel complete with weights cord and hook)

LINEAR EXPANSION HORIZONTAL APPARATUS ( CSI' superior quality with Brass rod, stainless steel finish Complete set up • A 50 cm long expansion base with a built-in dial gauge and thermistor. Three metal tubes — brass, copper (99.5% Cu, 0.5% Te), and aluminum (98.9% Al, 0.7% Mg, 0.4% Si): 6.4 mm outside diameter. • A foam insulator to avoid heat loss at the thermistor connection point. •Thermoplastic elastometer tubing with 6.4 mm I.D. ➀ A source of steam or hot water, such as the PASCO Model TD-8556A Steam Generator. ➁ A digital ohmmeter such as PASCO Model SE9589 to measure the thermistor resistance. Leads should have banana plug connectors, such as PASCO Model SE-9750 or SE-9751 Patch Cords)

Apparatus to determine time period of oscillation of cantilever (Best Quality 'CSI' Cantilever, Stopwatch, Slotted weight, Meter rod, Clamp)

P-N Junction Diode Apparatus Trainer Kit (Best Quality 'CSI' To verify Diode characteristics : Fitted with variable source voltage. And regulated power supply one diode. One DC Voltmeter, MO. 65 & One DC Ammeter MO-65 Mounted on the same base with terminals )

IC Regulated Power Supplies ( 0-12 V/ 1A)

Plug type resistance box ( 0-200 Ω)

Plug type resistance box (0-10 Ω )

Table Galvanometer (Analog 30-0-30 (20uA/Div))

Portable DC voltmeter (0-10 V)

Analog DC Ammeter (0-500 µA)

Analog DC Ammeter (0-500 mA)

One Way Plug Key

Sliding Rheostat (Wire Round Sliding Rheostat)

Inverse square law using Photo cell (Wooden optical bench, Photocell housed with Red and black sockets, Lamp house with lamps, DC micro ammeter. • On Board Analog Moving Coil Meters • Galvanometer : 30-0-30/micro ammeter. • Selenium photocell mounted in the metal box with Metal base • Lamp holder with 60-watt bulb with Metal base Standard Accessories : • Selenium photocell mounted in the metal box • Wooden plank with half-meter scale fitted on it. • Lamp holder with Lamp • Patch chords, Instruction manual)

Automatic Saw Machine

Pedestal Grinder

Single Purchase Crab Winch (Wall hanging White Stainless Steel Winch Crab Single Purchase)

Double Purchase Crab Winch (Diameter of load drum 85 mm, Pulley diameter 230 mm, Measuring height 1m wooden Scale, Weight: 1 set of slotted weight 1 kg = 200 gm x 5 piece 1 set of slotted weight 2.5 kg = 500 gm * 5)

Worm & Worm Wheel (Warm O.D. 1" to 12" 1 module to 20 module, Warm Mild Steel, En-8/19/24/31/36, Wheel Mild Steel, cast iron, gun Metal and pb2)

Differential Axle & Wheel (Diameter of wheel: 170mm, Diameter of major axle: 100mm, Diameter of minor axle: 67mm, Velocity Ratio: 10.5 : 1, Maximum recommended Load: 50N, Weights set: 4 x 0.1N, 3 x 0.2N, 1 x 1N, 2 x 2N, 2 x 5N, 1 x 10N, 2 x 20N)

Simple Screw Jack (Lifting capacity 20 kN)

Co-efficient of Friction measuring instrument (7 blocks of different materials blocks are given for testing)

Izod Impact Testing Machine (Energy Range 0-25 Joule Least count 0.1 Joule Hammer for Izod 2.75 JouleChapy 1.0 Joule)

Rockwell Hardness tester (Test Load- 250-3000 KgF, in stage of 250 KgF, Magnification 4X, Least count 0.01mm, Throat depth 200mm, Power supply 415V, 50 Hz, 3 Phase, Measurement range 1-6mm.)

Dye Penetration Test Kit (Aerol D P Test Kit 400 ml)

Bourden tube pressure gauge (0 -50 Kg/cm2)

Cochran Boiler Model, Cut Section

Babcock and Wilcox Boiler Model, Cut Section

Cut section of boilar mounting & accessaries

Soldering and de-soldering machine (240 volt,50 Hz)

Digital & Analog Multimeter

Hook up Wire (0.5MM)

Resistor (10 ohm,15 ohm,20 ohm,30 ohm,100 ohm,200 Ohm,1k Ohm,2k ohm,5k ohm, 10k ohm, 20 k ohm, 100k ohm, 1M ohm)

Capacitor (25 Volt ,(10,12,15,22,33,47,56,82,100,120,150,220,470,680,1000,1200,2700,3300,6800,8200) pico farad,(0.1,0.12,0.15,0.22,0.33,0.47,0.68,0.82,1,1.2,2.2,3.3,34.7,6.8,8.2,10,47)micro farad)

Relay (220V)

Diode (220 AC to 220 DC Volt)

Zener Diode (220 AC to 220 DC Volt)

L.E.D (3 Volt)

Regulated (0-220 Volt DC Supply)

Bread board

Transistor PNP & NPN Type (2 amps)

Solder

Soldering paste

Electrical tester (240 volt AC)

Electrical Fault Finder (240 Volt,50 Hz)

Lags / joint Socket

Single phase energy meter(230 volt 50 hz)

Single phase Motor (Celling Fan) (120 Watt,240 volt)

Floursent lamp with choke and starter (40 watt ,220 volt,50 hz)

Soldering & Riveting machine (25 watt,220 volt)

Hammering Drill Machine (220 Volt ,50 Hz)

Electrical Drill Machine (220 Volt ,50 Hz)

M.C.B (5 amps,220 volt)

Digital Multimeter

Electrical Calling Bell (240 volt,5 amp)

Electrical Socket (240 volt,5 amp)

Electrical tester (230 Volt)

Pliers ((8 inch))

Screw Driver with insulated handle (8 inch)

Wire Cutter

Half round File (250 mm)

Nose Plier (150 mm)

Weighing scale (4kg,LC:1g)

Hot Air Oven (45 l, 1500 W)

UTM (440 V, 100 kN, 1.3HP)

Air Permeability Apparatus (3 kg approx)

Vicat Apparatus (5 inches x 5 inches, 40 mm height, IS 4031 2645 2542 PART 1 1727 5513 amp 712 BS 12 146 915 1370 4027 4246 4248)

CTM (Analogue, 2000kN, Electrically Operated)

Sieve Brass Frame with Sieves As per BIS: 383 1970

Slump Test Apparatus (IS: 7320)

Compaction Factor Apparatus (IS: 5515)

Flakiness and Elongation Gauge (IS: 2386)

Aggregate impact test apparatus

Los Angeles Abrasion testing machine (IS: 10070)

Aggregate Crushing Value Apparatus, with accessories (150 mm, IS :9376-1979)

Ring and Ball Apparatus (220 V, 50 Hz, single phase)

Penetrometer for bitumen penetration

Pensky Martens Flash Point (Closed) Tester (Electrically Operated)

DELTA TECHNOLOGIES

UNITECH CORPORATION

DREAM INSTRUMENT CORPORATION