SPECIAL REPAIRS TO BLDG NO P158 P25 AND P17 ORS MD ACCN AT 1 MAHAR UNDER GE MH AND RH KIRKEE

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing coat) removing serviceable tiles to store and removal of rubbish out side MD land at the location decided by the Engineer-in-charge complete all as specified and as directed.

M&L for coloured joint free non-skid ceramic tiles of 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm, in floors etc set an jointed in neat cement slurry and pointed in white or coloured cement to match including laid over 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for coloured joint free non-skid ceramic tiles of 7 to 8 mm thick,area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in vertical surface, set and jointed in neat cement slurry and pointed in coloured cement to match over & including 10mm thick backing coat in cement morter ( 1:4 ) including trangular filleting on top in cement morter (1:4) complete all as specified & directed.

M&L for coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. over and including 15mm thick cement mortar (1:6) screed bed set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 350mm x 250mm x 7 to 8mm / 450mm x 350mm x 7 to 8mm thick of colour and pattern as approved by GE, as in vertical surface, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:4) etc including triangular filleting on top in cement mortar (1:4) complete all as specified & directed.

Taking up or down 15mm bore carefully steel water tubing, and connections with fittings including cleaning for re-fixing or removal complete all as specified and as directed

Supply & laying 15mm bore GI tubing 'medium grade' with and including all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc laid in floors /ceiling and including clips, wall hooks etc, complete all as specified and directed

Fixing only 15mm bore GI tubing ISI marked of size 'medium grade' with and including all necessary new fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc laid in floors /ceiling and including clips, wall hooks etc, complete all as specified and directed (Note:-Old GI pipes as retrived from respective item herein before in good condition shall be used)

S & F in repairs stop valves, Chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed - bore dia of pipe 15 mm. complete all as specified and directed

S&F in repairs, vitreous china squatting pan Orissa pattern wash down water closet white of size 580x440 mm, with integral foot rests complete with P or S trap, including trap including concrete bedding etc. complete all as specified and directed

S&F in repairs Chromium plated shower roses with or without swivel joints, 125mm size, including fixing to steel pipe or union complete all as specified and as directed.

S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm complete all as specified and directed

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm complete all as specified and directed

M&L for preparation of old surfaces and applying one coat of white wash on ceiling complete all as specified and directed.

Hacking out old broken glass, (any thickness, size , qulaity or description) metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified and directed

S&F 3mm thick pin headed /figure /frosted glass ordinary quality with oil putty /wooden beading in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed

S&F 4mm thick figured /frosted glass ordinary quality with oil putty /wooden beading in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removal of debris out side MD land at the location decided by the Engineer-in-charge complete all as specified and as directed.

M& L for rendering of external surface 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finishsed even and fair (without using extra cement ) and all as specified and directed.

M&L for rendering 10 mm thick on concrete surface in cement mortar (1 :4) as in ceiling etc. finished even and smooth (without using extra cement ) complete all as specified and directed.

M&L preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for rendering of internal surfaces 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces including finishing the surface with a thin layer of sagol complete all as specified and directed.

M&L for of preparation of newly plastered surfaces of wall and applying three coats of white wash on walls complete all as specified and directed.

Ditto all as per serial item No. 23 above but,applying white wash on new plastered surfaces of ceiling, complete all as specified and directed.

S&F in repairs Bib taps, fancy type, for 15mm bore, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and suitable of pipe fixed complete all as specified and directed

M&L for 25 mm thick plain cement concrete (1:2:4), type B-O (using 12.5mm graded stone aggregate) as in levelling course for laying floor tiles etc. complete all as specified and directed.

M&L for complete removal of existing finishes by scraping down old decorative surface of walls with steel wire brushes of smoke spots, moulds, efflorescent salts , and applying three coats of white wash on old surfaces of walls complete all as specified and directed.

Ditto all as per serial item No. 27 above but, applying three coats of white wash on old surfaces of Ceilings complete all as specified and directed.

M&L for complete removal of existing finishes and applying two coats of oil bound distemper on walls over a coat of alkali resistant primer including chalk whiting preparation of old surfaces , on plastered surfaces prepratary to distempering all as specified.

M&L for complete removal of existing finishes and applying two coats of cement base paint on walls including washing, rubbing down and stopping of old surfaces all as specified and directed.

M&L preparation of old wooden surfaces and wood based materials of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel surface of any description not otherwise described over 10 cm width or girth and applying, one coat of synthetic enamel paint complete all as specified.

S& F in repairs Soap dish CP, of size 160 x 160 x90 mm,fixed to plugs with chromium plated brass screws complete all specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5sqm but not exceeding 4sqm all as directed.

Taking down shutters of any description exceeding 1.0sqm and not exceeding 2.0sqm each all as directed.

S & F pressed steel frames of size frame 105 x 60 mm made out of 1.25 mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc. complete as specified all as directed.

Ditto all as per serial item No 37 above but of size frame size 125 x 60mm.

M & L for plain cement concrete 1:3:6 type C-0 using 12.50mm graded aggregate for filling in pressed steel door frames all as directed.

S&F 30 mm thick flush shutters (confirming to IS) solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed

S & F 35mm thick factory made second class hard wood plain, framed , panelled shutter (2 panel) with lock rail and panel commercial ply or 12 mm veneered particle board of 9 mm B.W.P commercial veneering on both faces.The size of rail and stile as per IS:1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick(2nd Class hardwood) factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze , etc (without sash bars) , edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass , etc, sizes of members of shutters as specified in SSR Part I , Section 8 , Clause 8.24 (a) , Supplied and fitted to chowkats all as specified and directed complete all as specified and as directed.

S&F solid PVC door frame (confirming to IS) of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube,fixing in opening complete all as specified & directed.

S&F factory made PVC solid panel door shutter 30mm thick (style) connecting of frame made out of MS tube for top and bottom rail. MS frame shall be coverd with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for top rail and bottom rail paneling of plain colour PVC to be fitted in the MS frame welded/ sealed in the stiles and rail with suitable PVC sheet and loading and jointed together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised 150 mm size, ISI marked fixed with stainless steel screws complete all as specified and directed

S&F aluminium anodised barrel tower bolts of extruded section, 150 mm length, ISI marked fixed with stainless steel screws complete all as specified and directed

S&F aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy, 300 mm long , ISI marked. complete all as specified & directed.

S&F in repairs powder coated aluminium pipe 20mm dia as in curtain rod fixed to brackets complete all as specified and directed. (Note : Brackets shall be measured and paid separately )

S&F in repairs powder coated aluminium brackets fancy type with adjustable threaded socket use for 20 mm internal dia drapery rod on each ends on doors and windows fixed with rowel plugs and cloured matching screws for curtain rods complete all as specified and directed

M&L for cutting holes in brick/stone walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, depth of embedded portion of hold fast exc half bricks and not exc one brick complete all as specified and directed .

M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

M&L for preparation of new untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Dismantling water tanks capacity exc, 250 & n.exc 500 litres and removing from site & Supply and fix in 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) double layered 'ISI' marked, hoisted & fixed in position including provision of washouts, vent pipe, nipples of suitable size complete all as specified & directed.

S & F in repair ball valves suitable for 20 mm bore iron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and directed.

Supply and fix in repair for PVC (SWR) pipe 110mm bore single socketed with rubber ring joints/ adhesive fixed to walls with PVC clamps complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 75mm bore single socketed with rubber ring joints/ adhesive fixed to walls with PVC clamps complete all as specified and as directed.

M&L in repairs PVC (SWR) bends of any radius of 110mm bore complete all as specified and directed .

M&L in repairs PVC (SWR) bends of any radius of 75mm bore complete all as specified and directed .

S&F in repairs PVC (SWR) branch 110mm bore piecs, single ( single Y ) equal or unequal complete all as specified and directed.

S&F in repairs PVC (SWR) branch 75 mm bore piecs, single ( single Y ) equal or unequal complete all as specified and directed.

S&F in repairs PVC (SWR) branch 110mm bore piecs, double (double Y)equal or unequal complete all as specified and directed.

S&F in repairs PVC (SWR) branch 75mm bore piecs, double (double Y)equal or unequal complete all as specified and directed.

S&F in repairs PVC (SWR) junction 110mm bore single ( single T) equal or unequal complete all as specified and directed.

S&F in repairs PVC (SWR) junction 75mm bore single ( single T) equal or unequal complete all as specified and directed.

S&F in repairs PVC (SWR) junction 110mm bore double, (double T),equal or unequal complete all as specified and directed.

S&F in repairs PVC (SWR) junction 75mm bore double, (double T),equal or unequal complete all as specified and directed.

S&F Steel window (any nos of shutter ) with side hung double shutters one side shutter/shutters to receive glass and other side shutter/shutters to receive guage including projecting type hinges with steel handles, and steel peg stays complete with glazing bars, complete all as specified and directed .

S&F steel ventilator with top hung shutter double (one for glazing and other for gauging) including hinges steel peg stay complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal of debris out of MD land at the location decided by the Engineer-in-charge complete all as specified and as directed.

Taking down / removing existing water proofing treatment from RCC roof slab including removal of plaster bed below felt / membrane and disposal of the same to distance exceeding 50m but not exceeding 100m as and where directed and M & L for 10 mm thick screeding / rendering in cement mortar (1:4) on concrete roof surface, using Water Proofing Compound @ 3% by weight of cement, surface finished even and smooth without using extra cement all as directed.

Supply only integral water proofing compound ISI marked complete all as specified and as directed.

M & L Water proofing treatment to RCC roof slab, walls, chhajjas etc, shall be carried out as specified below and as directed by Engineer-in-Charge. (a) Preparing plastered / concrete roof surface shall be thoroughly wire brushed cleaned to eliminate all sharp projection,washed, dried up and cleaned of all foreign material and dust to receive primer. Apply one coat of oil based bituminious primer @ 0.20 Kg per Sqm (c) Laying APP polymer modified approved membrane, 3 mm thick weighing not less than 3.5 Kg/Sqm by torch application method. with laps & overlaps as specified & joints sealed and applied complete by torch application method all as specified & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for leakage & seepages and rectifying the same to the entire satisfaction of GE. (d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/sqm on the top of membrane surfaces complete all as specified & as directed by Engr in Charge.

M/L for application of one coat of CORE COAT LP (F) Make: Build Core Chemicals, and grouting a slurry coat of neat cement using 2.70Kg/Sq Mtr of cement admixed with liquid water proofing admixture and one coat of SBR cement over the existing RCC slab including thorough cleaning of the surface before treatment

M&L for waterproofing treatment to RCC sunken slab as specified below. Make: PIDILITE or equivalent as approved by GE. (Note :-This item is continued at Sl No.75.01 to 75.06 below )

(a) creating fillet coving of 50mmX50mm with polymer modified mortar using cement : sand : URP

(b) Applying PU sealant at the junction of pipes and the RCC sueface.

(c) Apply1st coat of two component cementitious coating, over the surface and taking the coating on the walls over the angle fillet / watta portion.

(d) Lay 40gsm geotextile fleece at the watta portion.

(e) Apply 2nd coat of two component cementitious coating, over the first coat and taking the coating on the walls over the angle fillet / watta or vertical faces after 6 -8 Hrs.

(f) Applying 12mm thick plaster in C:M 1:3 with waterproofing compound conforming to IS 2645:2003 @ 250ml per bag of cement.

M & L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in filling, mass concrete, for sunkun floor etc. complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate ) as in flooring and finished fair and even complete all as specified and as directed.

Taking up or down carefully steel water tubing, 20mm bore of pipe and connections including cleaning for refixing or removal to store complete all as specified & directed

S&F and testing GI tubing of size 20mm bore 'medium grade' with and including all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc laid in floors /walls//ceiling and including clips, wall hooks etc,complete and making necessary connection and testing on completion complete all as specified and directed

Taking up or down carefully steel water tubing, 40mm bore of pipe and connections including cleaning for refixing or removal to store complete all as specified & directed

S&F and testing GI tubing of size 40mm bore 'medium grade' with and including all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc laid in floors /walls//ceiling and including clips, wall hooks etc,complete and making necessary connection and testing on completion complete all as specified and directed

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as specified and directed.

M&L for granite (of any type) slab, 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing etc complete over and including 15 mm thick cement mortar screed in (1:6) complete all as specified & directed.

M&L for 20-25mm thk machine cut cuddappah stone slab flooring over cement screed bed laid and jointed with grey cment slurry mixed with pigment to match the shade of the slab including grinding polishing complete laid over and including 15 mm thick screed bed or bedding in layer in cement mortar 1 :6, complete all as specified and directed.

M&L for PCC (1:3:6) type C2, (using 40mm graded stone aggregate) 75 mm thick as in plinth protection finished even and smooth without using extra cement incuding use of necessry formwork complete all as specified & directed.

M&L for 75mm thick PCC 1:4:8 Type D2 using 40mm graded stone aggregate as in sub base,complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in any mortar complete and M&L 60 mm thick M-35 grade interlocking coloured, rubber moulded, glossy finish paver tiles any shape and size white grey cement and pigments confirming to IS15658-2006 laid dry in floor, pavings, paths etc. complete all as specified including M&L for 25 mm thick and filling under floors including watering and consolidation complete all as specified and directed.

S&F in repair ,stainless steel sink, 1mm thick, kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Demolition of PCC block masonry built in cement or ement lime mortar, complete all as specified and directed.

M&L for precast cement concrete, type C-1 1:3:6 (20mm graded aggregate ) masonary with solid blocks, exc, 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.

M&L for prepration of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer, complete all as specified and directed

S & F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed. (Make : CERA, Hindware or Equivalent as approved by GE)

S&F in repairs wash hand basin vitreous china white (flat back) of size 580x450mm including, CI bracket, 32mm dia chromium plated (CP) waste coupling chain and plug porcelein stopper but including brackets, cutting for and pinning in ends of brackets etc. complete all as specified, and all necessary inlet outlet connections complete all as specified and directed.

S&F in repair pillar taps fancy type for 15 mm bore dia of pipe , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repairs 150mm length, floor door stopper of aluminium alloy body all as specified and directed.

S&F Cast iron floor trap 75 mm bore with grating including jointing to waste pipe and fixed with PCC (1:2:4) type B1, complete all as specified and directed.

S&F in repair steel almirah handle MS chromium plated (Built in cupboard) all as sepcified and directed.

S&F in repair locking arrengment to steel cupboard all as sepcified and directed. .

S&F in repair Mild steel,1mm thk shelves ( partition of steel cupboard .) all as sepcified and directed.

S&F in repairs for MS Butt hinges cold rolled mild steel meadium weight fixed to ms pressed steel chowkhats including necessary welding and making good of damaged portion etc. all as sepcified and directed.

S&F 100 mm Stainless steel butt hinges medium weight, cold rolled all as sepcified and directed.

M/L for spot welding for repairing steel windows and ventilators hinges, brackets, steel handle, etc. all as sepcified and directed.

S&F in repairs Double action spring hinges, size of spring hinges 150 mm, mild steel with steel wire spring, stove enamelled, black all as sepcified and directed.

S&F in repairs 300mm, MS ordinary rat tail rod pattern springs including roller and roller plate complete all as sepcified and directed.

S & F in repairs PVC connection of 600 mm length, suitable for 15 mm bore pipe with PTMT nuts all as specified and directed.

S&F plate rack made of stainless steel 1mm thick and overall size 915mm x915mm x 255mm, inlcuding taking down old /unsv complete all as specified and directed.

Taking down aluminium point wiring( light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants holder,regulators sockets, light fitting etc removing materials deposited to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as directed by Engr-in-charge.

M&L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm(Nominal area),single core, PVC insulated and unsheathed stranded cable 1100 volts grade, IS - 694 marked in FRLS and including heavy duty, PVC casing caping with including all accessories etc.,heavy duty ISI marked, including "concealed" MS terminal box ISI marked of suitable size / 3 mm thick hylam, sheet on MS terminal box or PVC rectangular box of suitable size as per site requirement for housing switch ,socket,regulators etc including PVC insulated stranded copper conductor 1.5 Sq.mm (nominal area) single core cable as earth and connecting to earth dolly complete and including making good of disturbed surfaces etc. complete all as directed by Engr-in-charge. for the following:-

(a) One light point controlled by one way switch 5 Amps

(b) One fan point controlled by one, one way switch 5 Amps and regulator

(c) One 5 Amps Socket outlet point controlled by one switch on independent board.

(d) One 5 Amps Socket outlet point controlled by one switch on same board

(e) Bell /buzzer point controlled by one push button on the same board with other switches or indipendent with cables 1.5 sqmm size.

M&L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 2.5 Sq.mm(Nominal area),single core,PVC insulated and unsheathed stranded cable 1100 volts grade,ISI - 694 FRLS marked the PVC casing caping with including all accessories etc.,heavy duty ISI marked,including modular white cover plate with frame and including "concealed" MS terminal box ISI marked of suitable size / 3 mm thick hylam, sheet on MS terminal box or PVC rectangular box of suitable size as per site requirement for housing switch ,socket,regulators etc,including PVC insulated stranded copper conductor 2.5 Sq.mm (nominal area) single core cable as earth and connecting to earth dolly complete and including cutting chases in the wall for box including making good of disturbed surface and all as specified for 16 Amps socket outlet on independent board.complete all as specified and as directed.

S&F Switch piano, flush type single pole, one way 6 Amp 250 volts,complete all as specified and directed

S & F socket outlet flush type, 5 pin 6 amps, multi purpose, 230 volts, single pole , suitable for 3-pin /2-pin 6 Amp plug tops complete all as specified and directed.

S & F socket outlet match with circuit board colour, 2 in 1, 3 pin, 5 Amps shuttered flush type 230 volts, single pole , complete all as specified and directed.

S&F Switch piano, flush type single pole, one way 16 Amp 250 volts,complete all as specified and directed

S&F ceiling rose, /Angle Holder / Batten Holder , surface type, 50mm dia 3 terminals, including PVC mounting block white/ivory finish.

S & F fan regulators electronic step type suitable for 1200 mm ceiling fans on existing circuit board and new circuit colour of regulator match with circuit board colour as directed by Engr-in-charge. Make: Anchor or Plaze with ISI marked as approved by GE.

S & F Bell push, flush type, 6 amp . 240 v, 50 Hz complete all as specified and as directed

S & F Bell multi music type 240 V, 50 Hz complete all as specified and directed. Make : Anchor or Plaza with ISI marked as approved by GE.

Taking down old unserviceable conventional fitting and S & F wall mounted high quality indoor batten LED tube light with PVC housing,LED tube rod 20 Watt with T-5 LED Batten type with integral electronic driver 20 W, colour temperature 6500 K (4') , operating lifte 50000 hrs, lumen 1800-3000, diffused connecting with three core flexible copper wire from connector to ceiling rose/ Angle Holder as per existing site requriement, complete all as specified & directed by Engineer in charge. Make: Bajaj / Philips / Crompton Greaves

Taking down old unserviceable conventional light fitting and S & F wall/ceiling mounted high quality indoor LED tube light 9 watt with PVC housing T-5 batten with intergrated electronic driver 09 watt, colour temperature 6500 K, operating life 30000 hrs, 900-1350 lumen (2'), diffused connecting with three core flexible coopper wire from connector to ceiling rose/ Angle Holder as per existing site requriement complete all as specified & directed by Engineer in charge. Make: Bajaj / Philips / Crompton Greaves

Taking down and S & F distribution board factory made TPN 4 way in, 415 Volt, Double door metal type suitable for fixing MCBs as out going and including TPN MCB 63 Amps as main incoming complete all as specified & directed by Engineer in charge. Make; Legrand / L&T / ABB. Note; Cost of MCBs will be measured and paid seperately.

Taking down and S & F distribution board factory made SPN 8 way in, 240 Volt, Double door metal type suitable for fixing MCBs as out going and including SPN MCB 32 Amps as main incoming complete all as specified & directed by Engineer in charge. Make; Legrand / L&T / ABB. Note; Cost of MCBs will be measured and paid seperately.

S & F MCB SP 5 to 30 Amps 'B' series 10 KA with two position DIN Rail clamp complete all as specified and as directed. Make; Legrand / L&T / ABB.

S&F PVC blank plate suitable for MCB DB complete all as specified and as directed

S & F MCB TPN 63 Amps 'B' series 10 KA with two position DIN Rail clamp complete all as specified and as directed. Make; Legrand / L&T / ABB.

S & F MCB DP 32 Amps 'B' series complete all as specified and as directed.

M & L for sub main wiring complete with two single core 4.0 Sqmm (FRLS) PVC insulated, unsheathed multi stranded copper conductor cable, 1100 volts, grade FRLS drawn into PVC casing capping not less than 32mm size and fittings and , continuous PVC insulated copper earth wire 2.5 Sqmm complete fixed on the surface of wall/roof etc complete all as specified and as directed. (Note :- 2 runs of 4.0 Sqmm conductor, PVC casing capping and one run of 2.5 Sqmm earth wire shall be measured as one unit length.)

M&L for Earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6.0 mm thick, buried vertically in ground (Earth pit not less than 2.25 metres deep below normal ground level and top edge of the plate not less than 1.5 m below ground level), connected to and including galvnised steel earthing lead wire 4 mm dia, by means of bolts, nuts & checknuts and washers etc; GI pipe 15 mm bore ''medium grade' pipe for protection of G.I earth lead wire, both shall be provided to the extent of 7.5 metres, all as shown on electrical plate No 3 of MES SSR-2009 Part-I, other end connected to electrical main switch board (inside the bldg) GI protection pipe buried in ground, laid under floors/plinths or fixed on walls or concealed in walls etc; with provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate, including PCC (1: 2 : 4) type B-1 earth pit with M.S angle iron frame, cast iron cover with locking arrangement, with G.I 20 mm bore 'medium grade' pipe and MS funnel with wire mesh for watering arrangement, including necessary excavation and earth work in any type of strata & testing on completion . (Note: (i) Rate for achieving required depth by compressor machine if required is deemed included in item unit rate. (ii) After earthing contractor should test the earth value and submit register for earth resistance result to Engr-in-Charge. )

Taking down carefully ceiling fan 1200/1400 mm all as directed by Engineer in charge,& M&L for machine spray painting , to ceiling fan of any make/sweep with one coat of synthetic enameled paint after preparation of old surface by cleaning with scrap/detergent, including writing of MES No. with black synthetic enameled paint with existing pattern all as directed by Engr-in-charge.

Overhauling of building panel board including painting with two coat of synthetic enamelled paint over a coat of red oxide & necessary welding to hinges including replacement of connection wiring with cable wire, of size 4 sqmm two run from TPN DB to existing electric meter,& replacement of bottom lugs, connection wire from DB to meter including New PVC Cable tray of size 35 mm X 25 mm, cable glands etc.including necessary connection wire to meter all as directed by engineer-in-charge. Note. TPN DB and MCB's will be measured and paid seperately.

M/S J J ENTERPRISES

V.R.PRAJAPATI AND CO.