REPAIR TO FLOORING PLASTERING INTERNAL WATER SUPPLY AND MISC WORKS IN MARU VIHAR AT AF STATION SURATGARH

Amount

BOQ (REPAIR TO FLOORING, PLASTERING, INTERNAL WATER SUPPLY AND MISC WORKS IN MARU VIHAR AT AF STATION SURATGARH )

Demolition of brick work or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches , pillars etc & removing debries out of MoD land, complete all as specified and directed by the Engineer-in-Charge.

Brick work with sub class 'B' , straight or curved on plan not exc 6m mean raidus built in cement mortar 1:6 , complete all as specified and directed by Engineer-in-Charge.

Brickwork with sub class 'B' bricks , straight or curved on plan not exc 6m mean raidus (except brick) built in cement mortar 1:6 , complete all as specified and directed by Engineer-in-Charge. Note: Servicable bricks retrived from serial item no.01 above shall be used after proper cleaning and washing of old bricks.

Dismantling floor, hearth or wall tilling including cement morter bedding (but not backing ),and removing serviceable tiles to store and rubbish off the premises , complete all as specified and directed by Engineer-in-Charge

First quality glazed ceramic coloured tiles of (300x200mm) x 7 mm thick, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles ,complete all as specified and directed by the Engineer in Charge.

First quality glazed ceramic coloured tiles of (350x250mm) x 7 to 8 mm (450x300mm) x 7 to 8 mm thick, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles ,complete all as specified and directed by the Engineer in Charge.

First quality, Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sq.m but not exceeding 0.11 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles,complete all as specified and directed by the Engineer in charge.

First quality, Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sq.m but not exceeding 0.18 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in coloured cement to match the shade of tiles,complete all as specified and directed by the Engineer in charge.

First quality, Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sq.m but not exceeding 0.18 Sq.m, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles ,complete all as specified and directed by the Engineer in Charge.

Demolition of stone slab & tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar ,complete all as specified and as directed by Engineer-in-Charge.

Machine cut Kota stone slab 18 -20 mm thick (of size not less than 55 cm x 55 cm) as in flooring with neat cement slurry @ 3.00 kg/Square Metre over and including 20 mm thick (average thickness) cement screed (1:4) base, laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish), ,complete all as specified and directed by the Engineer in Charge.

Machine cut Kota stone slab 18-20 mm thick as in skirting, over and including 10 mm thick rendering of cement mortar (1:4), laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish),complete all as specified and directed by the Engineer in Charge.

Rubbing and polishing (mirror finish) to existing Kota stone slab including jointed/pointed with grey cement slurry mixed with pigment to match shade of the slab (if required), complete all as specified and directed by the Engineer in Charge.

Demolition of cement concrete (reinforced) of any description and in any position , complete all as specified and directed by the Engineer in Charge.

Reinforced cement concrete 1:1.5:3 type A-1 (20mm graded stone aggregate) Nominal Mix as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like, septic tank slab, etc complete all as specified and directed by the Engineer in Charge.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings, septic tank slab and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floor, window cills, concrete railing, opening in concrete wall, sides of RCC slab, RCC / PCC bends in walls or similar work thickness exc. 05 cm and not exc. 10 cm in rough finished flat surface of concrete complete all as specified and directed.

Mild steel TMT bars 10mm dia and over cut to length bent shape as required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S, complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick walls or stone wall including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish in low lying area ,complete all as specified and directed by the Engineer in Charge.

Rendering 12 mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 finished the surface even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

Rendering 10 mm thick on RCC ceiling surfaces in cement mortar 1:3 and finished the surface even and smooth without using extra cement , complete all as specified and directed by Engineer-in-Charge.

Rendering 15 mm thick in two coats on fair faces of brick work or concrete surfaces. First coat 10 mm thick in cement morter 1:6 and second coat 5mm thick in cement morter 1:4 mixed with water proofing compound finished even and smooth without using extra cement, , complete all as specified and directed by Engineer-in-Charge. Note :- supply only water proffing compound shall be measured separetely.

Rough cast plaster over and including base coat of rendering 10 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and fair on external surfaces of brick work , complete all as specified and directed by Engineer-in-Charge.

Supply only integral water proofing compound complete all as specified.

Preparation of new plastered wall surfaces and applying two coats of exterior acrylic emulsion paint over and including one coat of primer (antifungal) (in camouflage pattern using number of colours) , complete all as specified and directed by the Engineer-in-Charge.Note : Pattern of camouflage shall be approved by GE.

Preparation of new plastered or un plastered wall surfaces of any description and applying two coats of oil bound distemper, complete all as specified and directed by the Engineer-in-Charge

Preparation of new plastered or unplastered surfaces of walls surfaces of any descriptions and applying three coats of white wash, complete all as specified and directed by Engineer-in-Charge.

Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed by Engineer-in-Charge.

Preparation of old decorated surface (plastered or unplastered) including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying two coats of distemper (oil bound) white or tinted on wall, complete all as specified and directed by the Engineer-in-Charge.

Preparation of old decorated surface on walls (plastered or unplastered) including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying two coats of exterior emulsion weather proof paint (shade as approved) in camoflage pattern, complete all as specified and directed by the Engineer-in-Charge.

Preparation of old decorated surface (plastered or unplastered) including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying two coats of white wash on wall, complete all as specified and directed by the Engineer-in-Charge.

Preparation of old decorated surface (plastered or unplastered) including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying two coats of white wash on ceiling, complete all as specified and directed by the Engineer-in-Charge.

Preparation of old wooden surfaces of any description, exceeding 10 cm width or girth of any description and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-charge.

Preparation of old steel surfaces of any description, exceeding 10 cm width or girth of any description and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-charge.

Demolition of cement concrete (unreinforced) in ground floors and paving not exc. 15 cm thickness (below or above ground level), including removal of rubbish in low lying area, complete all as specified and directed by the Engineer in Charge.

Plain cement concrete (1:2:4) type B-1, using 20mm graded stone aggregate as in coping, bands, bed block, etc like incl weathering, slightly rounded or chamfered throating as directed incl form work (straight or curved) and finish all exposed surface facing of concrete , complete all as specified and directed by Engineer-in-Charge.

Plain cement concrete (1:2:4), type B-1, using 20 mm graded mechanically crushed stone aggregates, 40mm thick as in flooring, finishing the surface even & smooth with using extra cement, complete all as specified and directed by Engineer-in-Charge.

Granite (any type) 14-16 mm thick, work (table rubbed and polished) in steps, windows cills, platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed of 15 mm thick in CM 1:4, complete all as specified and directed by the Engineer in Charge.

Taking up or down 15 mm bore steel tubing with connections or fittings from wall, ceiling and floor etc., including cutting/chasing in wall/floor and removal from site, complete all as specified and directed by the Engineer in Charge.

Taking up or down 20 mm bore steel tubing with connections or fittings from wall, ceiling and floor etc., including cutting/chasing in wall/floor and removal from site, complete all as specified and directed by the Engineer in Charge.

Steel water tubes, 15 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed by the Engineer in Charge.

Steel water tubes, 20 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed by the Engineer in Charge.

Re-fixing steel water tubing of 15 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified.

Re-fixing steel water tubing of 20 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified.

Cutting chases for concealed water tubing and making good to facings where required and pointing in cement mortar 1:3, cutting not exc 10 cm girth complete all as specified and directed by the Engineer-in-Charge

Vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts flushing cistern and flush pipe) including plastic seat cover white and mild steel chromium plated aluminum hinging devices, connected to drains outlet, fixed as in repairs,complete all as specified and directed by the Engineer in Charge.

Vitreous china bowl urinal (half stall)flat back or corner wall type fixing ,bedding urinal against wall in cement mortar 1:2 including pointing around urinal back with cement motrar, with grating and union for discharge pipe, including urinal spreader for fixing with 15 mm dia pipe and automatic flushing cister , fixed as in repair, complete all as specified and directed by the Engineer in charge. Make :- CERA/HINDWARE/PARYWARE.

Stop valve 15 mm dia cast copper alloy , angular decorative fancy type chromium plated, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair , complete all as specified and directed by Engineer-in-Charge.

Pillar taps, 15 mm bore cast copper alloy chromium plated fancy type, with capstan heads, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe fixed as in repair, complete all as specified and directed by the Engineer in Charge.

Bip taps fancy type chromium plated ,15 mm cast copper alloy with crutch handle or butter fly handle screwed down , screwed for iron pipe and fixed as in repair, complete all as specified and directed by the Engineer in Charge.

15 mm size bib tap standard of PTMT, any colour high pressure screwed for iron pipes (minimum weight 90 gram) fixed as in repair, complete all as specified and directed by the Engineer in Charge.

15 mm size pillar tap fancy type of PTMT, any colour high pressure screwed for iron pipes (minimum weight 120 gram) fixed as in repair, complete all as specified and directed by the Engineer in Charge.

Ball valve of 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) & fixed in repairs , complete all as specified and directed by Engineer-in-Charge.

Chromium plated brass shower rose 125 mm bore of rim with swivel joint fixed as in repairs ,fancy type suitable for 15 mm bore pipe including shower arm chromium plated 15 mm dia, 195 mm long with bend of 45 degree including fixing to steel pipe or union ,complete all as specified and directed by Engineer-in-Charge

Wash basins, vitreous china, white, flat back of size 550x400 mm with pedestal including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe and including new brackets fixed as in repair , complete all as specified and directed by the Engineer in Charge. Make :- CERA/HINDWARE/PARYWARE.

Vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rest (exclusive flusing cistern& flush pipe) including cast iron 'P' or 'S' trap of 100 mm bore pipe fixed in PCC 1:2:4 type B-2 and necessary lime concrete, fixed as in repairs, including making good the surface to match with existing floor finish fixed as in repair ,complete all as specified and directed by the Engineer in Charge. Make :- CERA/HINDWARE/PARYWARE.

PVC valveless , syphonic action type flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and pvc flush pipe 32 mm dia for low level fixed in repair , complete all as specified and directed by the Engineer in -Charge

PVC connection of PTMT ,non corrosive with nuts and washers on both ends, 450mm long suitable for 15 mm bore fixed in repair , complete all as specified and directed by the Engineer in -Charge

PVC waste pipe 32mm dia socketed and 600mm long for WHB /sink fixed in repair, complete all as specified and directed.

Stainless steel sink with drainage board made of 1.00 mm thick sheet for kitchen with plugs washers & wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410mm x 330mm x 160mm, with and including PVC waste pipe and CP waste coupling 32 mm fixed as in repair and making good to disturbed surfaces, complete all as specified and directed . Make : Nirali/ blue star or equivalent.

Dismantling existing water storage tanks exc 250 litres but n.exc 500 litres capacity by disconnecting existing water connection and removal from site , complete all as specified and directed by Engineer-in-Charge

Dismantling existing water storage tanks exc 501 litres but n.exc 1000 litres capacity by disconnecting existing water connection and removal from site , complete all as specified and directed by Engineer-in-Charge

Rotational moulded white coloured PVC, tripple layered, water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc. but excluding ball valve , complete all as specified and directed by Engineer –in-Charge.

Rotational moulded white coloured PVC, tripple layered, water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc. but excluding ball valve , complete all as specified and directed by Engineer –in-Charge.

PVC (SWR) pipes 110mm bore single socketed in any length with ruber rings joints fixed to walls with necessary brackets, fixed in repair complete all as specified and directed by Engineer-in-Charge.

PVC (SWR) pipes 110mm bore bends any radius , fixed in repair complete all as specified and directed by Engineer-in-Charge.

Dismantling of 75/100 mm bore Cast Iron or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

100 mm bore Cast Iron soil, waste and vent pipe, sand cast pipe, in any length, with or without ears, with cement joints in cement sand mortar 1:1 with spun yarn fixed to walls complete all as specified and directed.

75 mm bore Cast Iron soil, waste and vent pipe, sand cast pipe, in any length, with or without ears, with cement joints in cement sand mortar 1:1 with spun yarn fixed to walls complete all as specified and directed.

Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm dia of pipe fixed in repair, complete all as specified and directed by the Engineer-in-Charge

Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm dia of pipe fixed in repair, complete all as specified and directed by the Engineer-in-Charge

Disconnecting existing tank exc. 250 Litres but not not exc. 500 Litres capacity, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position complete all as specified and directed by the Engineer in Charge.

Taking down Chowkhats with shutters without taking of shutter from the frame of any description not exceeding 1.50 Sq. m each, and making good the disturbed Surface in CM 1:4 & finished with similar specification as exists, complete all as specified and as directed by the Engineer-in-Charge.

Taking down Chowkhats with shutters without taking of shutter from the frame of any description exceeding 1.50 Sq. m but not exceeding 4.00 Sq. m each, and making good the disturbed Surface in CM 1:4 & finished with similar specification as exists, complete all as specified and as directed by the Engineer-in-Charge.

Taking down shutters of any description exceeding 1 Sq. m but not exceeding 2 Sq. m each, from chowkhat, complete all as specified and directed by the Engineer in Charge.

Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted as per specification & drawing and as per manufacturer's instructions and shown on drawing on Page 160 of SSR Pt-II ,complete all as specified and directed by the Engineer in Charge.

Factory made solid panel PVC Door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail,lock rail and bottom rail on either side as gap insert for top rails, bottom rail,panelling of plain colour PVC sheet to be fitting in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supply & fixing in the frame at site as per specification and drawing on Page No 156 of SSR Part-II Rates,complete all as specified and directed by the Engineer in Charge.

35mm thick flush shutter, solid core construction with block board core and plywood face panels,commercial type on both sides, complete all as specified and as directed by Engr-in-charge.

35 mm thick (Batten thickness) 2nd class hardwood skeleton shutters, open rebated and prepared to receive wire cloth, glass etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, wire cloth etc., sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a), complete all as specified and directed by the Engineer in Charge.

Mild steel framed work such as in dooes/chowkhats or gates of angle or other section with gusset plates, rail, braces etc. complete drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with including either hooks and hinges or steel hanging door fittings (exclusive of steek sheeting or other coveriong, running rails and guides) and hanging, also fastening & fixing and similar work conforming to Fe-290 grade E-165 , complete all as specified and directed by Engineer-in-Charge

Factory made steel windows box type using ERW hollow 'P' sections comprising double frame for glazed and gauged skelton shutters jointed internally with flat iron 40x4mm complete including grill of 12mm square bar, fixed horizontally @ 100mm centre to centre, hinges, handles, tower bolts, lugs, peg stay etc complete all as directed. Note:- (i) For payment purpose, measurement of double shutter with frame and Guard bars shall be consider as one unit. (ii) Glazing and wire mesh shall be measured separately in respective items of BOQ.

Factory made top hung box type steel section ventilators, fixed type with glazing bars and with one shop coat of zinc chromate primer,complete all as specified and directed by the Engineer in Charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling our glazing pins / spring clips providing and fixing new one , complete all as specified and directed by Engineer-in-Charge.

Sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified and directed by the Engineer in charge.

Frosted glass 3 mm thick, pin head type and glazing with oil putty or fixed with beads in square not exc. 0.5 Sqm in each pane complete all as specified and directed.

Aluminium handles cast type anodised of 150mm size, complete all as specified and directed by Engineer-in-Charge.

Aluminum anodizes barrel tower bolts of extuded section and fixed of 200 mm ong size (length of bolt), complete all as specified and directed by Engineer-in-Charge

Butt hinges medium weight cold rolled steel of 100 mm size and fixed ,complete all as specified and directed by the Engineer in Charge.

Butt hinges medium stainless steel of 100 mm size and fixed in repair complete all as specified and directed by the Engineer in Charge.

Aluminum alloy, anodized, door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed length of bolt 300mm, bolts not less than 12mm dia with and including a minimum of 6 bolts not,four on bolt plate and two on staple plate complete (ISI marked ) , complete all as specified and directed by Engineer-in-Charge

Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed by Engineer-in-Charge.

Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks, or galvanised wire staples, fixed as in repair, complete all as specified and directed by Engineer-in-Charge.

Preparing new steel surface of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge.

Preparation of new wooden surfaces of any description, exceeding 10 cm width or girth of any description and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed by Engineer-in-charge.

S&F 50mm wide 4mm thick rubber bidding for aluminium /wooden door seal fixed to door shutter with nails as in repair all as specified.

Aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutter of 851 to 1000mm width and of weight between 61 to 80 kgs and fixed as in repair, complete all as specified and directed by Engineer-in-Charge

Cleaning and removing all scale and dirt, etc. using jute brush from inside & outside of 250 litre to 500 litre capacity PVC water tanks and from mouths of connected pipes, removing the scale and dirt etc. to a distance of not exceeding 500 metre, washing the tanks with water, cleaning the connecting pipes with bleaching powder solution and finally applying 2% potassium permanganate solution for disinfection, marking with white paint on tank ‘Date of cleaning the tank ’, complete all as specified and directed by the Engineer in Charge.

Cleaning and removing all scale and dirt, etc. using jute brush from inside & outside of 501 litre to 1000 litre capacity PVC water tanks and from mouths of connected pipes, removing the scale and dirt etc. to a distance of not exceeding 500 metre, washing the tanks with water, cleaning the connecting pipes with bleaching powder solution and finally applying 2% potassium permanganate solution for disinfection, marking with white paint on tank ‘Date of cleaning the tank ’, complete all as specified and directed by the Engineer in Charge.

PVC tank lid (cover) suitable for 500/1000 litres capacity water tank with hinged and hooked fixing by steel screw for existing PVC water tank on buildings, fixed as in repair, complete all as specified and directed by the Engineer in Charge.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

Grating round 100mm size of PTMT (minium weight 50 gram) fixed in repair , complete all as specified and directed by the Engineer in -Charge.

Demolition of cement concrete (reinforced) / RCC jalies of any description and in any position , complete all as specified and directed by the Engineer in Charge.

Pre-cast cement concrete louvers or RCC Jali 35 mm thick made out of cement concrete 1:2:4 type B-0, using 12.5 mm graded stone aggregate and set in cement mortar 1:4 including all mouldings etc. complete all as specified and directed.

Pre-cast cement concrete RCC designer pillar of size 100mm x 100mm x 900mm made out of cement concrete 1:2:4 type B-0, using 12.5 mm graded stone aggregate and set in cement mortar 1:4 including all mouldings etc. complete all as specified and directed.

Supply and Fixing in repairs 150mm mild steel helical door spring including roller and roller plate complete all as directed including welding to frame (Make as per sample)

50 mm thick, plain cement concrete 1:3:6, type C-1, using 20 mm graded mechanically crushed stone aggregates, laid in 1:30 slope as in plinth protection , surface finished even and smooth without using extra cement, complete all as specified and directed by the Engineer in Charge. Note: (i) Plinth protection shall be laid to slope (1 in 30) in alternate bays not exceeding 3 mtr in length with joint of 6mm wide and 10mm deep shall be provide along the wall and bays and shall be filled with sealing compound grade 'B'. (ii) Cost of sealing compound is included in the unit rate of the item.

Drapery rod / curtains rods 25 mm dia, powder coated, of colour brown / Cherry / Irory including set of fixing brackets, fennels etc., fixed to wall in repairs, complete all as specified and directed by the Engineer-in-charge. Note : Item includes cost of brackets & knobs

S&F in repairs health faucets showers chromium plated with flexible pipe extension fixed with WC suitable for 15mm dia pipe complete all as specified.

Contract Amount shall be derived after affecting the amount of Schedule of Credit in General Summary on serial page No 15 (R) of tender documents.

H S BUILDERS

M/S VISHNU ENTERPRISES

M/s Tiwari and Sons

RATHORE ENTERPRISES

shubham enterprises

RAM CHANDER CONTRACTOR