PROVN OF PARKING SHED TO CERTAIN BUILDING IN NAVAL RESIDENTIAL AREA/CIVILIAN RESIDENTIAL AREA AT INS CHILKA UNDER GE CHILKA

Amount

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth, for foundation, etc. or for , manholes not exceeding 10 Sqm on plan and getting out in soft/loose soil complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed.

M&L Mild steel TMT bar 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column hooking end and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

M&L Mild steel TMT bar 5 mm dia and over upto and including 10mm dia in stirrups, spacer and binders, cut to length bent to shape required including cranking bending spirally for hooping for column hooking end and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

Use and waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter , rough finished surfaces of concrete complete all as specified and as directed.

Use and waste Formwork to sides of pillars, posts, struts, piers, columns etc , rough finished surfaces of concrete complete all as specified and as directed.

M&L for RCC 1:2:4 type B-1 using 20mm graded aggregate stone aggregate as in foundations, beam, plinth beams, base of columns etc complete all as specified and as directed.

M&L for RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in columns, pillars, piers, post and struts etc complete all as specified and as directed.

M&L mild steel work as in roof trusses (framed),vertical post, trussed purlins and heavy bracket framing (square or rectangular hollow sections) including distance pieces, cleats, base plate, nuts, bolts etc. conforming to Fe-290 Gde E-165 complete all as specified and as directed. .

M&L for brick work with fly ash old size bricks, straight or curved on plain exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L 15 mm thick rendering on brick or concrete surfaces in cement mortar 1:6, surface finished even and fair complete all as specified and as directed.

M&L for applying two coats of weather proof acrylic emulsion paint exterior grade (100% acrylic) of silver steak shade of Asian paint over a coat of primer on external plastered surfaces of walls , column, pillars etc with approved shade complete all as specified and as directed.

M&L applying two coat of synthetic enamel paint of approved shade over one coat of red oxide primer including prepration of new steel and iron surfaces of any description over 10cm in width or girth complete all as specified and as directed.

M&L applying two coat of synthetic enamel paint of approved shade over one coat of red oxide primer including prepration of new steel and iron surfaces of any description not exceeding10cm in width or girth, when unconnected with other painting or when painted in a different tint complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for broken stone hardcore of guage not exceeding 63mm , deposited , spread, leveled in layers not exceeding 15cm thick watered and rammed to a true surface complete all as specified and as directed.

M&L 100mm thick for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring , surface finished even and smooth without using extra cement complete all as specified and as directed.

S&F pre -painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall,fixed with self tapping screw complete all as specified and as directed.

S&F pre -painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and as directed.

M&L Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in bands, copings, kerbs and similar other works including necessary use and waste of form work complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed.

Removal excavated soil to a distance not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.

ABHIMANYU MAHARANA

ODRA NIRMAN