CONSTRUCTION OF A TOILET BLOCK FOR LADIES AND GENTS NEAR BLDG NO T2 SPL REPAIR TO WIRING AND REPLACEMENT OF ELECTRIC FITTING AND FIXTURE AT RAMPART8 BLDG O7 8 INSIDE FORT WILLIAM PROVN OF TEMPORARY SHED FOR 20 NOS SCOOTER PARKING IN FRONT OF ADV HQ E

Amount

SCHEDULE 'A' PART-I (B/R WORKS) Demolition of brick work built in cement mortar including all quions arches pillars etc but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and directed.

Surface dressing n exc 15 cm deep in soft loose soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m in depth for foundations or for shafts, wells, cesspits, manholes, pier holes etc. not exceeding 10 Sqm on plan and getting out soft loose soil complete all as specified and as directed.

Excavation in trenches exceeding 1.50 m but not exceeding 3.0 m in depth for foundations or for shafts, wells, cesspits, manholes, pier holes etc. not exceeding 10 Sqm on plan and getting out soft loose soil complete all as specified and as directed.

M&L excavating in post holes (or similar holes) each in soft/ loose soil n exc 0.5 cum, getting out, returning , filling in and ramming earth or broken rubble mixed with earth around , in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n. exc 50 cm and making good surface complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing of surplus soil not exceeding 50 m and deposited where directed at a level not exceeding 1.50m above the starting point complete all as specified and as directed.

Removing excavated material exc. 250m but n.exc. 500m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

Earth filling under floor incl spreading ,levelling & well ramming includuing watering as required n exc . 25 cm thick complete all as specified and as directed. (Note :- Earth obtained from excavation shall be reused)

Materials and labour for hardcore of gauge n exc. 63 mm, brocken boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for hardcore of broken stone gauge exc 63mm but n exc 100 mm, deposited, spread and leveled in layer n.exc 15cm thick, watered and rolled / rammed to a true surface under PCC Platform complete all as specified and as directed.

M&L PCC in foundations, filling and mass concrete with Type C2, 1:3:6, (40mm graded stone aggregate) complete all as specified and as directed.

Materials and labour for PCC 1:5:10 type E2 (using 40 mm graded coarse aggregate) as in foundation, mass concrete, etc complete all as specified and as directed.

Materials and labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, mass concrete, etc complete all as specified and as directed.

Materials and labour for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in drain or surface channel complete all as specified and as directed.

Materials and labour for cement concrete type B2 1:2:4 (using 20mm graded stone aggregate) as in surface channels, manhole bases and drain complete all as specified and as directed.

Materials and labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.complete all as specified and as directed.

Materials and labour for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cills, copings, kneelers, apex stones,bed plates etc incl necessary formwork complete all as specified and as directed.

Materials and labour for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in foundation, footing of column, plinth beam, etc. complete all as specified and as directed.

Materials and labour for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in column, pillars, piers, posts and struts complete all as specified and as directed.

Materials and labour for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in beams, cantilevers, lintel over 1.5m span or bands complete all as specified and as directed.

Materials and labour for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in chajjas and similar works complete all as specified and as directed.

Materials and labour for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in slab supported on walls beams and column in floors, roofs landing,deck slabs and in shelves complete all as specified and as directed.

M & L for brick work using old size sub class 'B' fly-ash bricks straight or curved on plan exec 6 metre mean radius, built in cement mortar 1:4 all as specified and directed.

M&L for brick work (using old serviceable bricks obtained from demolition), straight or curved on plan exc 6 m mean radius built in cement mortar (1:4) complete all as specified and as directed.

M & L for brick work using old size sub class 'B' fly-ash bricks straight or curved on plan exec 6 metre mean radius, built in cement mortar 1:6 all as specified and directed.

M & L brick work using old size sub class 'B' fly-ash bricks straight or curved on plan to any radius in half brick wall, built in cement mortar 1:4 all as specified and directed.

Material & labour for cutting chases in brick wall, pinning in, making good to facing there required and pointing in cement mortar 1:3 to ends (or) edges of landing,steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing etc and making good cutting nexceeding 10cm complete all as specified and directed.

Uses & waste of Formwork to rough finished flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Use and waste of formwork to side and soffits of floor or roof beams, beam haunching , girders, bressummers, lintels, cantilevers, shelves including supports , overhanges etc also splayes between floors and beams etc, rough finished flat surface of concrete complete all as specified and directed .

Material & labour for formwork to sides of concrete of columns, pillars, posts with rough finished square/ rectangular surfaces of concrete complete all as specified and as directed.

Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping, fair finished surface of concrete, all as specified .

Material & labour for formwork to as in chajjas with rough finished square/rectangular surfaces of concrete complete all as specified and as directed.

Supply and fixing 2nd class hard wood (sal) plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

M&L 30 mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both side complete all as specified and directed.

S & F PVC solid door frame of size 50 x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F factory made solid panel PVC door shutter of 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain cover PVC 'C' channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement all as directed

Supply and fixing pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and as directed.

Material and labour for PCC 1:3:6 type C-0 as in filling door frame complete all as specified and as directed.

Supply and fixing 100mm long stainless steel butt hinges complete all as specified and as directed.

Supply and fixing 100mm long Mild steel butt hinges complete all as specified and as directed.

Supply and fixing small articles with 2nd class hard wood complete all as specified and as directed.

Supply only 50mm long Mild steel butt hinges complete all as specified and as directed.

Supply and fixing 150mm long aluminium bow handle complete all as specified and as directed.

Supply and fixing 150mm long aluminium tower bolt complete all as specified and as directed.

S&F 200 mm long aluminum anodised barrel tower bolts of extruded section .

Supply and fixing 200mm long aluminium sliding door bolt complete all as specified and as directed.

Supply and fixing 250mm long aluminium sliding door bolt complete all as specified and as directed.

Supply and fixing 300mm long brass ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and as directed.

Supply and fixing mild steel TMT bar 10mm dia and over, cut to length , bend to shape required, including cranking, bending, hooking end etc. including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Supply and fixing mild steel TMT bar 6mm to 8mm dia, cut to length , bend to shape required, including cranking, bending, hooking end etc. including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Supply and fixing mild steel TMT bar 5mm dia and over upto and including 10mm dia in stirrups, binders, cut to length, bend to shape required, including cranking, bending, hooking end etc. including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M&L for Mild steel hand rails, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc. and similar work conforming to Fe-290 Gde E-165 complete .

M&L mild steel work as in holdfast, clamps for pipes, etc made out of flat iron any size including necessary welding or fixing nuts and bolts complete all as specified and directed.

M & L for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.

M & L for plate girder or single stanchions built up of one beam or chennel section with flange plates, caps, bases,splices, angle brackets cleats and other connected plates complete all as specified and as directed.

M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket, framing (Beam, tee, angle, channel or flat sections ) including distance pieces , cleats with FE 410-W (Gde - E 250) quality -A etc complete all as specified and as directed.

M&L plates (plain or chequered) channels, square cut or notched (ordinay and counter sunk) forming holes, without any attachment of Fe 410W (Gde-E -250) Quality 'A' ccomplete all as specified and as directed.

Supply and fixing mild steel windows/ ventilators fabricated from rolled formed sections made of galvanised steel colour coated/ powder coated with zinc of 120gm /sqm complete with glazing bars, dovetailed or welded complete all as specified and as directed.

Supply and fixing mild steel guard bars for steel window complete all as specified and as directed.

M&L for Anodized aluminum frame for doors, windows, ventilators and partition with one or more rebate including joining cleat for fixing etc complete all as specified and directed..

M&L Anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed.

S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.

-ditto- but 0.50 mm thick coloured plain galvalume sheet as in ridge/valley gutter of roof.

Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Material and labour for Plain Cement concrete 1:2:4, type B-2, (40mm graded aggregate) for sub base of floor, hardstanding etc, 100mm thick, finished fair and even complete all as specified and directed.

M&L for providing 75 mm thick cement concrete (1:3:6) type C-2 using (40mm graded stone aggregate) as in Sub base of floor rough surface to receive the topping layers complete all as specified.

Materials and labour for Non skid ceramic tiles, area exc 0.18 sqm but not exc. 0.38 sqm in each tile, laid over and including 15mm thick screed bed in cement mortar 1:4 with cement slurry over 35mm thick PCC 1:2:4 type B1 (20 mm graded stone aggregates) over 100mm thick PCC 1:4:8 type D2 (40 mm graded stone aggregates) over sand filling complete all as specified and as directed. (NOTE: Sand filling shall be measured and paid seperately)

S&F Non Skid ceramic tiles colour 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 over brushing with neat cement slurry with 3.00 Kg of cement per sqm complete all as specified and directed.

S&F glazed ceramic colur tiles (300x450 x 7mm thick ) on dado & skirting , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick cement plaster with rough finished in cement mortar 1:4 to received tile over brushing with neat cement slurry with 3.00 Kg of cement per sqm all as specified and directed.

M & L 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 15 mm thick screed bed in cement mortar 1:4 compete all as specified and directed.

M&L for providing 75 mm thick cement concrete (1:3:6) type C1 using 20 mm graded stone aggregate as in plinth protection, surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 300mm X 300mm X 10mm thick high traffic paver tiles (coloured) joint free, conforming to IS-4457:2007, as in floor of and jointed with neat cement slurry and pointed in white/coloured cement to match the surface laid over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and as directed by the Engr-in-Charge. (MAKE : JOHNSON, Model : ENDURA or equivalent model in other makes listed in the tender)

Material and labour for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade Ä complete all as specified and directed.

Material and labour for forming contraction (dummy) joints 10mm wide 75mm deep filled with sealing compound grade 'A' complete all as specified and directed.

Material and labour for 100mm thick PCC 1:3:6 type C2 as in foot path complete all as specified and as directed.

Materials and labour for chequered cement concrete tiles 20cm x 20cm x 25mm thick laid over 20mm thick screed bed in cement mortar 1:4 with cement slurry mixed with pigment on stairs complete all as specified and as directed.

Material and labour for 15 mm thick rendering in cement mortar (1:6), finished even and smooth without using extra cement to fair face of brick wall / concrete wall surface, complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar 1:6 on fair faces of brick wall or concrete surfaces, finished even and fair complete all as specified and as directed.

M&L rendering 10 mm thick in cement mortar 1:3 on ceilings (upto ceiling height of 6 to 7m incl necessary scaffording/arragements for execution of the work) complete all as specified and directed.

Material and labour for rendering 5 mm thick in cement mortar 1:3 on fair faces of brick wall or concrete surfaces complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar (1:4) on fair face of brick or concrete surface finished even and fair complete all as specified and as directed.

M&L rendering 15 mm thick cement plaster in two layer each of 10+5 mm thick on fair faces of brick wall or concrete surfaces in cement mortar (1:4) & water proofing compound mixed with second layer @ 3% finished even and smooth without using extra cement complete all as specified and directed. ( Note:- WPC shall be measured and paid seperately)

Material and labour for rendering 20mm thick in cement mortar 1:4 in two coats (10mm thick backing coat and 10mm thick finishing coat) with 3% WPC on fair faces of brick wall or concrete surfaces of external wall complete all as specified and as directed. (Note:- WPC shall be measured and paid separetly)

Material and labour for rendering 20mm thick in cement mortar 1:4 in two coats (10mm thick backing coat and 10mm thick finishing coat) with 3% WPC and polyster fibre @ 125gm per 50 Kg of cement on fair faces of brick wall or concrete surfaces of external wall complete all as specified and as directed. ( Note:- WPC & polyster fibre shall be measured and paid separetly)

Supply only integral water proofing compound all as specified and as directed.

Supply only polyster fibre compound all as specified and as directed.

Supply and fixing 4mm thick frosted glass for toilet ventilator complete all as specified and as directed.

Supply and fixing 4.8 mm thick sheet glass frosted on one side, area in squares exc 0.5 sqm in each pane and glazing with rubber gasket fixed to aluminium frame work / snap beading complete all as specified and as directed by the Engineer-in-Charge

Material and labour for 2 coats of oil bound distemper over a coat of primer on internal plastered surfaces including one coat of putty (minimum thickness 1.5mm) after preparation of surfaces complete all as specified and as directed.

M&L preparing newly plastered ceiling surface and applying two coats of oil bound distemper over a coat of primer applied over 1.5 mm thick putty complete all as directed.

Material and labour for 2 coats of synthetic enamel paint over a coat of pink primer on wooden surface of doors including preparation of surfaces complete all as specified and as directed.

Material and labour for 2 coats of synthetic enamel paint over a coat of pink primer on wooden surface of treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc.,area n exc 0.1 sq. m each, including preparation of surfaces complete all as specified and as directed.

Material and Labour for applying two coats of weather proof exterior emulsion paint over a coat of external primer to new plastered surfaces on walls including preparation of surfaces complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, treating ends of posts, back of chowkhats etc, with tar or coal tar black paint, area tarred exc 0.1 sqm but n. exc 0.5 sqm each complete all as specified and directed.

-ditto- but treating small articles such as holdfasts, ends of posts, back of chowkhats, etc, area n exc 0.1 sqm each

Material and labour for 2 coats of black japan paint over a coat of red oxide primer on steel surface of treating Small articles such as knobs, fasteners, holdfast similar arti-cles, when unconnected with other painting or when painted in a different tint complete all as specified and directed.

M&L for Two coat of synthetic enamel paint over one coat of red oxide primer to the steel and iron surfaces of any description, n exc 10 cm in width or girth, when unconnected with other painting or when painted in a different tint complete all as specified and directed.

M&L for prepration of new or previously untrated steel surfaces of any description, not otherwise described, over 10cm width or girth by applying two coats of synthetic ememal paint over a coat of red oxide complete all as specified and directed.

Supply, hoisting and fixing in repairs rotational moulded polyethylene water storage tank (cylindrical vertical type with closed top) of capacity 1000 Litres, multi-layered (ISI marked), with GI tank nipple & cover, hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

S&F 25 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (MAKE : PRAYAG, Cat No. 153 or equivalent model in JEXON / POLYTUF / SHAKTI)

Material & labour for galvanized steel water tubing 25mm bore pipe medium grade with all fitting and fixed in wall/ ceiling laid in floor complete

M&L for galvanized steel water tubing 20mm bore pipe medium grade with all fitting and fixed in wall/ ceiling laid in floor complete

M&L for galvanized steel water tubing 15mm bore pipe medium grade with all fitting and fixed in wall/ ceiling laid in floor complete

Supply and fixing 25 mm bore dia of pipe Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S & F 20 mm bore dia of pipe Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F Chromium plated brass Pillar tap, fancy type. with areator, fixed to wash hand basin, complete all as specified and directed. (Make : Ess Ess, Cat No: C-201B / JAQUAR, Cat No: CON-021KN/ PARRYWARE, Cat No: G1402A1 / PRAYAG, Cat No: 9204 or equivalent model in KOHLER / MARC / CRABTREE / HINDWARE)

S&F Chromium plated brass Bib cock with wall flange, fancy type, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : Ess Ess, Cat No: C-209 / JAQUAR, Cat No: CON-107KN/ PARRYWARE, Cat No: G1405A1 / CERA, Model : OCEAN / PRAYAG, Cat No: 9208 or equivalent model in HINDWARE)

S&F Chromium plated brass Angular stop cock, fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No: CON-59KN / PARRYWARE, Cat No: G1453A1 / ESS ESS, Cat No: T-112 / CERA, Model: OCEAN / PRAYAG, Cat No: 9210 or equivalent model in HINDWARE)

Supply and fix Low density polyethylene pipe connection, comprising of 15 mm dia 450 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete all as specified and directed. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent model in SHAKTI / JEXON)

Supply and Fixing, Tubular towel rail (premium quality), 20mm dia, D type, 600 mm long between flanges including brass chromium plated, complete all as specified and directed. (MAKE : JAQUAR, Cat No : ACN-111SM / PARRYWARE, Cat No : T6401A1 / ESS ESS, Cat No: AC-101 / CERA, Cat No: F5004103 or equivalent model in KOHLER / MARC / CRABTREE/ HINDWARE)

S&F White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float, flush pipe and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART or equivalent model in COMMANDER )

S&F vitreous china (coloured) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed. (Make : Parryware, Model : Elite / JAQUAR, Model: Continental / CERA, Model: Conventional / HINDWARE, Model: SLICK)

Supply and Fix vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including making good to floor, complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0117 / HINDWARE, Cat No. 20004 / JAQUAR, Cat No. CNS-WHT-OP01 / CERA, Model: COVY)

Supply and fixing of 100mm cast iron sanitary connection socket to fit WC out let complete all as specified and as directed.

S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, making good disturbed Surfaces in Cement Mortar 1:3 complete all as specified and as directed. (MAKE : PARRYWARE, Cat No. C0406 / HINDWARE, Cat No. 10010 / JAQUAR, Cat No. CNS-WHT-801 / CERA, Cat No: S2040141)

S&F CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed (Make: JAQUAR, Cat No: ALD-769L250x190 / ESS ESS, Cat No: C-231C or equivalent model in PARRYWARE / KOHLER / MARC / CRABTREE / PRAYAG / HINDWARE)

S&F 6mm thick bevelled edge mirror of size as required fixed on 6mm thick acrylic PVC sheet complete all as directed by the Engr-in-Charge .

S&F Vitreous china, coloured half stall urinal flat back with grating and union for discharge pipe (excl flush pipe and flushing cistern and waste pipe) incl providing and fixed plugs, bedding urinal against wall in cement mortar 1:2 and securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement including 32mm CP bottle trap, CP connecting pipe and CP urinal spreader complete all as specified and directed. (Make of Urinal : Parryware Cat No: C-0575/ Jaquar, Cat No: URS-WHT-13261 / CERA, Cat No: S4020102 / HINDWARE, Cat No: 60030) (Make of Bottle Trap: JAQUAR, Cat No: ALD-769L250x190 / ESS ESS, Cat No: C-231C or equivalent model in PARRYWARE/PRAYAG/ HINDWARE). (Make of Urinal Spreader : CERA, Cat No: F8070201 / PRAYAG, Cat No: BEA-25 or equivalent model in PARRYWARE / HINDWARE / JAQUAR)

Supply and fixing vitreous china ladies Urinal, white including connections to flush pipe and outgoing pipes complete all as specified and as directed. (Make of Urinal : Parryware, Cat No: C-0573/ CERA, Cat No: S4040101 / HINDWARE, Cat No: 60003)

Supply and fixing of 32mm bore of discharge pipe, Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches/fixed on walls complete all as specified and as directed.

Supply and fixing 100mm dia cast iron (spun) waste pipe, laid in trenches complete all as specified and as directed.

Supply and fixing 100mm dia cast iron (spun) waste pipe fixed on wall complete all as specified and as directed.

Supply and fixing 100mm dia CI branch pieces complete all as specified and as directed.

Supply and fixing 100mm dia CI bend complete all as specified and as directed.

Supply and fixing 100mm dia CI cowl complete all as specified and as directed.

Supply and fixing CI nahani trap of out let nominal dia 75mm complete all as specified and as directed.

Supply and fixing 150x150mm gully trap complete all as specified and as directed.

Material & labour for reinforced concrete pipes ,class NP2 of 150mm dia laid in trenches and jointed with collars complete all as specified.

Material & labour for concrete bed to drain pipes of 150 mm bore, with cement concrete 1:3:6 type C-2 (40 mm graded stone aggregates) including packing under, and hunching, against the side of pipes after they are laid and tested complete all as specified.

Supply and fixing 150 mm bore cast iron (sand cast) soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed by the Engineer-in-Charge. (Note : Earthwork to be measured and paid separately).

M & L for for water proofing treatment on existing cleaned RCC roof with the following specification and manufacturings instruction complete all as specified and as directed:- (a) Preparing and cleaning of fully dry surfaces as per IS3067-1966 (b) Applying bitumen primer conforming to IS:3384-1968 over the cleaned plaster surface @ 0.5 Ltr per sqm (c) Applying a layer of APP based polymeric membrance 3.0mm thick (minimum) weight 3.0Kg per sqm (reinforced) with polyster Non woven fabric weighing not less than 160gms per sqm by torch application. The over laps shall be minimum 100mm on the transverse direction and 75 mm on longitudinal direction. (d) Applying one coat of aluminium paint @0.10 ltr per sqm over APP based polymeric membrane.

M&L 20 mm thick screed bed in cement mortar 1:4 over roof mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed. (NOTE: WPC will be measured and paid separately)

Material and labour for Precast RCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in cover slabs and the like including providing necessary form work etc, set in cement mortar (1:6) complete all as specified and as directed by the Engineer-in-Charge. (Note : Reinforcement to be measured and paid separately)

S&F vitreous china floor mounted coupled closet (Pedestal pattern) coloured including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC coloured seat cover and connecting fittings complete all as specified and directed. (Make : PARRYWARE, Model : Cascade NXT / CERA, Model : CLAIR / HINDWARE, Model: CONSTELLATION or equivalent model in JAQUAR)

S&F stainless steel round grating 150mm dia complete all as specified and directed by Engr-in-Charge.

S&F 15mm bore chromium plated Hand shower (health faucet), brass body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed. (MAKE : JAQUAR, Cat No : ALD-573/ PARRYWARE, Cat No : T9941A1 / ESS ESS, Cat No: C-232D / CERA, Cat No: F8030401AB or equivalent model in KOHLER / MARC / CRABTREE / HINDWARE)

S&F vitreous china coloured pedastal pattern wash hand basin of size 560mm x 430mm, with pedestal incl providing 32mm dia CP waste coupling, bracket, waste pipe and making all necessary connections, fixed as directed by Engr-in-Charge. (Make : Parryware, Model : VENICE N / CERA, Model: CONCORD / HINDWARE, Model: NEO LARGO / Jaquar, Model: ARIA)

Supply and fixing, 15 mm bore fancy type stop valves, cast copper alloy, chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, incl concealed body, screwed both ends for iron pipe or for unions and, complete all as specified and directed. (MAKE : JAQUAR, Cat No: CON-083FTK / PARRYWARE, Cat No : G1461A1 / ESS ESS, Cat No: T-108 / CERA, Model: OCEAN / PRAYAG, cat No: 9218 or equivalent model in HINDWARE)

S&F Chromium plated brass Wall mixer, concealed type incl concealed body, with both overhead and telephone shower arrangement, fixed with 15 mm bore Iron pipe complete all as specified and directed. (Make : Jaquar, Cat No : CON-281KN / PARRYWARE, Cat No: G1417A1 / ESS ESS, Cat No: C-218 / CERA, Model : OCEAN / PRAYAG, Cat No: 9280 / HINDWARE, Cat No: F200022) NOTE: Telephone shower shall be measured and paid seperately.

S&F fancy type chromium plated telephonic hand shower with flexible tube and hook screwed for iron pipe including frame complete all as specified and directed. (Make : PARRYWARE, Cat No: T9983A1/ Ess Ess, Cat No: HS 105) / PRAYAG, cat No: BHS-91S / CERA, Cat No: F7030502 / HINDWARE, Cat No: F160053 or equivalent model in JAQUAR)

S&F 15mm bore chromium plated central hole basin mixer (premium quality) without popup waste system with 450mm long copper pipe and brass nut, complete all as specified and directed. (MAKE : ESS ESS, Cat No : T-118 / JAQUAR, Cat No : CON-167KNB / PARRYWARE, Cat No: G1414A1 / CERA, Model: OCEAN / PRAYAG, Cat No: 9250 or equivalent model in HINDWARE)

S&F 15mm bore chromium plated two way bib cock with flange, fancy type as directed. (Make : Ess Ess, Cat No: C-203 / JAQUAR, Cat No: CON-041KN/ PARRYWARE, Cat No: G1434A1 / CERA, Model : OCEAN / PRAYAG, Cat No: 9212 or equivalent model in HINDWARE)

S&F Chromium plated brass Towel ring (premium quality) complete all as specified and directed. (Make : Ess-Ess, Cat No: AC-502 / JAQUAR, Cat No: ACN-1121BN / PARRRYWARE, Cat No: T6002A1 or equivalent or equivalent model in HINDWARE).

S&F 15mm dia toilet paper holder, recessed type, with chromium plated bars complete all as specified and directed. (Make : JAQUAR, Cat No : AHS 1551 / ESS ESS, Cat No: AC-506C or equivalent model in CERA / PARRYWARE / HINDWARE)

S&F chromium plated brass over head shower rose with arm (premium quality), with 3 flow, fixed to 15mm bore of iron pipe complete all as specified and directed. (Make : CERA, Cat No: F7040103 (for arm) & F7020305 (for shower) / PARRYWARE, Cat No: T9802A1 (for arm) & T9986A1 (for shower)/ESS ESS, Cat No: OH-104A or equivalent model in JAQUAR / HINDWARE)

S&F glass shelf with chromium plated bars complete all as specified and directed. (Make : Jaquar, Cat No : AQN-7771 / ESS ESS, Cat No: AC-207 or equivalent model in CERA / PARRYWARE / PRAYAG)

Cutting into existing manholes for connecting new drains, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate), finished smooth and reforming benching for 300 mm bore pipe as required and as directed by the Engineer-in-Charge.

-ditto- but for 150 mm bore pipe

SCHEDULE 'A' PART-II (E/M WORKS) Taking down carefully existing aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power ) complete and making good the disturbed surfaces of walls, Floors, ceilings etc to match with existing all as specified and directed.

Materials and Labour for surface type point wiring with 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing capping complete with all fittings and accessories, (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for One light point or one fan point or bell point controlled by one switch or bell push complete all as specified and directed. (NOTE :- Quoted rate shall be exclusive of the cost of terminal box & laminate cover which shall be measured seperately.

All as per item No. 152 above but for one 5 amps switch socket outlet on same board controlled by another switch, complete all as specified and directed (surface type point wiring without terminal box).

All as per item No. 152 above but for one 5 amps switch socket combination on independent board, complete all as specified and directed (surface type point wiring without terminal box).

All as per item No 152 above but using 2.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core for line conductor and 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core for earth continuty wire for one 15/16 amp multi socket out let independent (surface type point wiring without terminal box).

Materials and Labour for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC conduit complete with all fittings and accessories (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for One light point or one fan point or bell point controlled by one switch or bell push complete all as specified and directed. (NOTE :- (i) Where tube light fitting is to be fitted/suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling & the unit rate shall be deemed to be included for the same. (ii) Quoted rate shall be exclusive of the cost of terminal box & laminate cover which shall be measured seperately. (iii) Cost of cutting chases for concealed wiring shall be deemed to be inclusive in the quoted rates. No claim in this regard shall be entertained at a later stage)

All as per item No 156 here-in-before but for one 5 pin 5/6 amp socket out let point in the same switch board of light points (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches

All as per item No 156 here-in-before but for one 5 pin 5/6 amps multisocket outlet point in independent board (concealed wiring) (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches

All as per item No 156 above but using 2.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core for line conductor and 2.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core for earth continuty wire for one 15/16 amp multi socket out let independent. (concealed wiring) (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches

All as per item No 156 above but using 4.0 Sq. mm (nominal area) FRLS PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core for line conductor and 4.0 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core for earth continuty wire for one 15/16 amp multi socket out let independent. (concealed wiring) (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches

S & F Modular Switch 1 way 6 A, 1 module

S & F Modular Switch 1 way 16 A, 1 module

S & F Modular Bell push 6A, 1 module

S & F Modular Socket 6 A- 2/3 pin combined 2 module

S & F Modular Socket 6 A/ 16 A, 2/3 pin combined 2 module

S & F Modular Fan step regulator, 120W- 2 module

S & F Modular type White cover plate with frame 3 module

S & F Modular type White cover plate with frame4 module

S & F Modular type White cover plate with frame 6 module

S & F Modular type White cover plate with frame 8 module

S & F Modular type White cover plate with frame 12 module

S & F Modular type Metal Flush box 3 module

S & F Modular type Metal Flush box 4 module

S & F Modular type Metal Flush box 6 module

S & F Modular type Metal Flush box 8 module

S & F Modular type Metal Flush box 12 module

S&F Ceiling rose three terminals polycarbonate , isolated body complete all as specified and directed.

S&F Call bell, musical type complete all as specified and directed.

Taking down the light fitting any type from existing wall/ceiling and re-fixing it complete with new wire complete all as specified and directed.

S&F SPN DB, IP 43 protection, double door, 240 volts, 4 way complete all as specified and directed. (MAKE : L&T, Cat No. DBSPN004DD / ABB, Cat No. E-SHC M4 / SCHNEIDER, Cat No. NBKRENSNDD04 / C&S, Cat No; CSDBSPNPDD04 / BCH, Cat No: BCHSPNDD04W / HPL, Cat No: MDBDD04 / HAGER, Cat No: VYS04D / HAVELLS, Cat No: DHDPSHODRW04 or equivalent model in INDO ASIAN (OPTI PRO) / LEGRAND)

Supply and Fix, Double Door, Sheet Metal Enclosure for DBs for mounting of MCB for 240 Volts, 8 way, with 200 Amps rated bus bar, Single Pole & Neutral, complete all as specified and directed. (MAKE : L&T, Cat No. DBSPN008DD / ABB, Cat No. E-SHC M 8 / SCHNEIDER, Cat No. A9HSND08 / HAGER, Cat No: VYS08D / C&S, Cat No: CSDBSPNPDD08 / BCH, Cat No: BCHSPNDD08W / HPL, Cat No: MDBDD08 / HAVELLS, Cat No: DHDPSHODRW08 or equivalent model in INDO ASIAN (OPTI PRO) / LEGRAND)

Supply and fixing TPN DB, IP 43 protection, double door, 415 volts, 4 way (8+12) complete all as specified and directed. (MAKE : L&T, Cat No. DBTPN004DD / SCHNEIDER, Cat No. A9HTND04 / HAGER, Cat No: VYT04DH / BCH, Cat No: BCHHTPNDD04W / C&S, Cat No: CSDBTPNHPDD04 /ABB, Cat No: E-SHDB M4 or equivalent model in HAVELLS / INDO ASIAN (OPTI PRO) / HPL / LEGRAND)

NOTE FOR ITEM NO. 180 to 182 :- (1) Incoming MCCB/RCCB/MCB and outgoing MCBs shall be measured and paid seperately as "Supply Only". (2) Quoted rate is deemed to be inclusive of blanking plate for slots remaining blank after fixing of MCBs. (3) DB, MCCB, RCCB & MCB shall be of the same manufacturer.

Supply only MCB, 'C' series, TPN, 415 volts, 63 Amps, breaking capacity 10KA complete all as specified and directed.

Supply only MCB, 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed.

Supply only MCB, 'C' series, SPN, 32 Amps, breaking capacity 10KA complete all as specified and directed.

Supply and fixing MCCB 4 pole, 415 volts 16 KA AC, 50 Hz , thermal magnetic release, 63 Amps capacity with Icu=Ics complete all as specified and directed. (MAKE : LEGRAND, Cat No: 4200 13 or equivalent in SCHNEIDER / ABB / HAGER / INDO ASIAN (OPTI POWER)

S&F LED Bulkhead fitting 10 watt, mounted on wall /ceiling connected with insulated unsheathed flexible copper wire of suitable size (length not exceeding 0.5 m) from ceiling rose complete all as specified and directed. (Make: Philips, type: WT 202W P LED 6S CW PSU S1 PC P3495/CROMPTON, cat No: LBH-10-CDL/JAQUAR, cat No: LBLK91X010XW/SURYA ROSHNI, Cat No: SLEBLH10W or equivalent model in BAJAJ / HAVELLS / WIPRO)

S&F Exhaust fan heavy duty AC single Phase 230 V / 240V 50 Hz of size 300 mm sweep, 1400 RPM complete with louvers, shutters and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block including making circular hole in existing wall to accommodate exhaust fan and necessary civil work and making good the disturbed surface complete all as specified and directed. (MAKE: CROMPTON, Model : EXHD300-4-1 / USHA, Model: Turbo Heavy Duty or equivalent model in HAVELLS / BAJAJ)

S & F modular Socket for AC short circuit protection motor starter with MCB DP 25 Amps capacity AC 230 Volt with Plug Top with Indicator complete all as specified and directed. (Make: WIPRO (North West), Cat No: ACPU6M-BT or Equivalent in LEGRAND /ANCHOR (WOODS) /Schneider/ ABB )

M&L for sub main wiring with two run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through and including PVC conduit of suitable size, surface type complete all as specified and directed. (NOTE : Four runs of single core 6.0 sqmm cable & one run of PVC conduit shall be measured as one unit)

All as per Srl. Item No. 80 above but with two runs of 4.0 Sqmm cable and one run of 4.0 Sqmm as earth continuity conductor in PVC conduit, medium grade (NOTE : Three runs of single core 4.0 sqmm cable & one run of PVC conduit shall be measured as one unit)

All as per Srl. Item No. 82 above but with two runs of 2.5 Sqmm cable and one run of 2.5 Sqmm as earth continuity conductor in PVC conduit, medium grade (NOTE : Three runs of single core 2.5 sqmm cable & one run of PVC conduit shall be measured as one unit)

Supply and fixing LED mirror light suitable for 05 Watt LED with opal acrylic diffuser, surface mounting type with and including OEM LED and necessary electrical connections with copper flexible cable of suitable size complete all as directed. (MAKE : HALONIX, Cat No : HLB-07-05-CW-IP / CROMPTON, Cat No; LDL-05-CDL / SURYA, Cat No: SLE BT 5W ARROW / BAJAJ, Cat No: BCLSB 05 WH or equivalent model in PHILIPS / HAVELLS / WIPRO)

S&F surface mounted LED luminaire, 1 X 20 Watt in aluminium housing, with polycarbonate diffuser & integrated electronic driver complete with all other accessories internally prewired and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. (MAKE: HAVELLS, Model: Lumline Plus / HALONIX, Cat No: HLB-03-20-CW-AL / SURYA, Cat No: SLE BTN T8 20W / BAJAJ, Cat No: BCLSBAL 20W CW / JAQUAR, Cat No: LGLZ01X020XC / PANASONIC, Cat No: PBTM08204 / HPL, Cat No: HLPT51520CW / CROMPTON, Cat No: LDL-20-CDL or equivalent model in PHILIPS / CENTURY LED LTD)

-ditto- as per Item No. 56 but of 1 X 10 Watt capacity in aluminium housing (MAKE : HAVELLS, Model : Lumline Plus / HALONIX, Cat No: HLB-03-10-CW-AL / SURYA, Cat No: SLE BT 10 / JAQUAR, Cat No: LGLZ01X010XC / HPL, Cat No: HLPT51510CW / CROMPTON, Cat No: LDL-10-CDL or equivalent model in PHILIPS / BAJAJ / PANASONIC /CENTURY LED LTD)

PRABIR TRADERS

UNIVERSAL

SHEIKH ENTERPRISE

GHOSH ENTERPRISE

UNITED ENGINEERS

MS AP CONSTRUTION AND CO