Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹26.3 LAWARDED | AWARDED |
Tender Value
₹29.6 L
EMD Value
₹29,580
Closing Date
30 Sept 2025, 10:30 pmClosed
Rural Development and Panchayat Raj Department
Construction of New Buliding at Govt Ayurvedic Clinic In Rameshwara Village, Nyamathi Taluk
RDPR/2025-26/BD/WORK_INDENT19048
RDPR/2025-26/BD/WORK_INDENT19048
Reserved
Buildings
Electronic Documents, First(One Cover)
RDPR Division Office Davanagere
₹740
₹29,580
20 Sept 2025
20 Sept 2025
29 Sept 2025
Construction of New Buliding at Govt Ayurvedic Clinic In Rameshwara Village, Nyamathi Taluk
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Earth work excavation for Foundation by mechanical means for allworks& depth upto 3 m, as per drawing and technicalspecifications,including setting out,shoring, strutting, barricading, caution lights,...
Providing Filling in foundation with granite/ trap broken metal 100mm and down size with approved sand including hand packing, ramming, watering including cost of all materials and labour with lead up...
Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. Thegranite/trap/basaltcrushedgraded coarse aggregatesand fine aggregatesas per relevant IS Codes...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) including with all lead & lift charges.
Providing and laying in Reinforced cement concretefor all Basement & surface level works, return walls, retaining walls, sunken floors etc. Thegranite /trap/ basalt crushed graded coarse aggregates an...
Providing and laying in position Reinforced cement concretefor all Super structures of building,Roadworks,Waterworks,Irrigationworks& super structure works of bridgesupto 3.50 m height. Thegranite/tra...
Providing and laying in position Reinforced cement concretefor all Super structures of building,Roadworks,Waterworks,Irrigationworks& super structure works of bridgesupto 3.50 m height. Thegranite/tra...
Providing and laying in position Reinforced cement concretefor all Super structures of building,Roadworks,Waterworks,Irrigationworks& super structure works of bridgesupto 3.50 m height. Thegranite/tra...
Providing and laying in position Reinforced cement concretefor all Super structures of building,Roadworks,Waterworks,Irrigationworks& super structure works of bridgesupto 3.50 m height. Thegranite/tra...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour...
Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent member...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...
Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.incl...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth c...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...
Supplying heavy gauge PVC Conduit piipe.... dia....mm thick with suitable size bends, metal junction boxes adhesive paste etc. by groove cutting in the wall and fixing by bracing U or J hooks and ceme...
Supplying heavy gauge PVC Conduit piipe.... dia....mm thick with suitable size bends, metal junction boxes adhesive paste etc. by groove cutting in the wall and fixing by bracing U or J hooks and ceme...
Groove cutting Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of conduit/GI pipe and plastering, finishing upto wall surface complete. including with all lead & l...
Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.including with all lead & lift...
Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.including with all lead & lift...
Supplying and fixing PVC/metal conduit Deep junction box including with all lead & lift charges.
Supplying and fixing PVC/metal conduit Deep junction box including with all lead & lift charges.
Supplying and fixing "S' Hook made out of 14mm dia MS Rod including with all lead & lift charges.
Point wiring using Copper wire with switch : Supplying and wiring adopting loop system in existing PVC conduit /casing capping using 2x1.5sqmm (Phase and neutral) and 1x1.00sqmm (Earth wire0 FRLS mult...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and flush mounting powder coated/galvnized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/CC wall inclu...
Supplying and flush mounting powder coated/galvnized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/CC wall inclu...
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 including with all lead & lift charges.
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 including with all lead & lift charges.
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 including with all lead & lift charges.
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 including with all lead & lift charges.
Supplying and fixing 32Amps security and energy saving DP switch with key tag suitable to operate on 230 volts. 50Hz AC supply and completely wired on existing box including with all lead & lift char...
Supplying 4mm thick plastic sheet with necessary nitches for fixing switches. regulators etc., and fixing on existing wooden or metal box using NF screws.including with all lead & lift charges.
Supplying way plastic gang box and fixing using necessary wooden/rawl/phill plugs and screws including with all lead & lift charges.
Supplying way plastic gang box and fixing using necessary wooden/rawl/phill plugs and screws including with all lead & lift charges.
Supplying and fixing /replacing of 6/16/32Amps electrical accessories on existing switch board. including with all lead & lift charges.
Fixing a Shunt capacitor of ….KVAR capacity with necessary clamps, bolts and nuts on existing wooden or metal board including banking of more than one capacitor including with all lead & lift charge...
Wiring for lighting /power circuit using one of PVC insulated 1100V Grade ,muftis and copper conductor single core cable in open or concealed system of wiring. Using class ‘A’ approved materialal...
Wiring for lighting /power circuit using one of PVC insulated 1100V Grade ,muftis and copper conductor single core cable in open or concealed system of wiring. Using class ‘A’ approved materialal...
Supplying and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.inclu...
Supplying and fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts.bolts and washers including with all lead & lift charges.
Supplying and fixing regular MCB distribution boards on wall/oodboard / flush mounting using required clamps, bolts, nuts etc., withprovision for fixing suitable type capacity MCB's single phase/3phas...
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. single phase AC supply conforming to ISS-374-1979 and with double bal...
Supplying of LED light fighting 1x2'-9/10w.feet-PVC batten with integrated LED tube ..... W with high quality diffuser with life of 25000 burning hours and 70% lumen maintenance with CRI 80. Power in...
Providing and Placing on terrace(at all floors levels) polythylene water storage tank IS:12701 marked with cover and suitable locking arrangement and making necessary holes for inlet and outlet and ov...
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes 20 mm nominal dia Pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & ...
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes 32 mm nominal dia Pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & ...
Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 g including with all lead & lift charges.
Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...
Earth work excavation for Foundation by mechanical means for allworks& depth upto 3 m, as per drawing and technicalspecifications,including setting out,shoring, strutting, barricading, caution lights,...
Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. Thegranite/trap/basaltcrushedgraded coarse aggregatesand fine aggregatesas per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent member...
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal ...
Providing and fixing white vitreous china water closet squatting pan (Indian type) :Long pattern W.C. pan of size 580 mmincluding with all lead & lift charges.
Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length 20 mm nominal bore.including with all lead & lift charges.
Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 g including with all lead & lift charges.
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying to work spot rolling, lowering and placing in position RCC perforated rings in the already excavated pit including loading and unloading at both the destinations with all lead and lift with ...
Providing and fixing white vitreous china laboratory sink Size 600x450x200 mm with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. ...
Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .