EEE/SZ/26-27/itemNo.1

Supply, Installation,Testing and Commissioning of Premium Quality Swing type Barriegate/BoomBarrier complete in all respects (Civil/Electrical), having electromechanical drive unit with 100% duty cycle, boom of rectangular /oval/hexagonal shape made up of aluminium, Telescopic Arm Length - 3 to 6 meter, Opening And Closing Time - (3-6 Sec), Noiseless operation with auto Cooling system, Motor working time- 6 million times, operated by Radio Receiver with remote control & Pushbutton, Colours options available Yellow & Grey, Motor motion Control -Limit Switch & balanced Double spring system, should have Left / Right version interchangeable onsite , not to be one side fixed, housed in Steel Housing box , Working Voltage/frequency 220+-10% V, 50/60 Hz +-5% Hz AC/12V DC/24V DC, The boom barrier should have IP-54/IP-55 & weight of barrier 40-50 kg with Reflecting LED light & Tapes in Length, Rated Power/Torque/frequency:– 100-150W, Torque 40-100 Nm, 50/60Hz, manual operation in case of power failure, including Civil foundation works (PCC)(foundation of minimum size 450mmLx450mm Wx350D(100 mm above ground level)(NS using M15 grade concrete)), The name of the MP/MLA/Councillor etc is to be written with their constituency with enamel paint of suitable size, CE/UL/BIS Certified including following accessories:- a) PC Safety Anti accident Device (IR Sensors), b) Dual Channel Loop Control Detector including Induction Coil for Auto close operation, c) 3 Way Opening switch controller (Push Button), d) 2 Way traffic light 8" dia in Polycarbonate housing with minimum 2500mm mounting MS pole. (Excluding 3 core X 1.5 sqmm cable)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.(a) 3 x 1.5 sqmm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

Supplying and Fixing DP sheet steel enclosure on sutface/recessed along with 25/32A 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting outthe excavated soil and disposal of excavated soil as directed within a lead of 50 metres

Providing and laying in position cement concrete of specific grade excluding the cost of centering and shuttering-all work up to plinth level:1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)