Community Hall near Ashram at village Gurha Jagir Naiwala w.no.7,Pyt.Gurha Jagir, Block Bhalwal Brahmana Under scheme ( MPLAD) for the year 2025-26

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming All kinds of soil :

P/Laying of cement conct. 1:5:10( 1 cement :5coarse sand :10 graded stone aggregates 40mm) Of specified gradeincluding curing but excluding cost of centring and shuttring. all work up to plinth level.

P/Laying of cement conct. 1:3:6( 1 cement :3 coarse sand :6 graded stone aggregates 20mm) Of specified gradeincluding curing but excluding cost of centring and shuttring. all work up to plinth level.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Centering and shuttering including strutting,propping etc.and removal of form for mass concrete

sofit of slab

Edge of slab

for column

for beam

Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in Superstructure including curing in cement mortar 1:6

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) Size of tile 600x600 mm including grouting the joints with white cement and matching pigments

for skirt

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6mm for diagonal braces

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

wiring for light point/fan point/exhaust fan point/call bell with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit,with modular switch,modular plate,suitable GI Box and earthing the point with 1.5 sq.mmFRLS PVC Insulated copper conductor single core cable etc.as required(GroupA)(including socket,main box,invertor wiring and supply lane)

providing and fixing led bulb/conceled of 9 watt complete jobs

providing and fixing Heavy Duty Fan 1200mm Sweep ISI mark of approved brand as per direction of engineer incharge

a)Carriage of Sand avg. 6 km lead by MT

b) Carriage of C/bajree avg. 6 km lead by MT

b) Carriage of brick avg. 15 km lead by MT

Providing and fixing Display board including painting,writing all complete.